Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

HandrailsColumnsFurniture Videos (156)

Sort by

Or click here to: Search All Videos


WOODTURNINIG - Transformation of this plywood // TRANSFORMAÇÃO desse compensado
By: Odair Lucas Lucas
November 16, 2019 · 5,603 views

materiais compensado naval de 25mm barra roscavél 3/8 porcas 3/8 cola pva

 

Woodturning a Furniture Leg for a Nightstand
By: Jake Gevorgian
November 02, 2019 · 565 views

In this video I am turning a furniture legs from walnut wood. There are more details of this project on my websites. Many many thanks to Armen Miran the beautiful remix of an Armenian lullaby.

 

Pallet Wood Table Legs - Episode 213
By: Paul Lockwood
September 17, 2019 · 424 views

Using the slats you find on pallets, I've glued three pieces together and then cut these on the table saw at around 47mm square. They were tacked with brad nails in three places which means any turning has been planned with this. There were a total of 16 legs to turn to make small tables for garden furniture. Basic turnign between centres with the skew. I did get a couple of catches along the way which meant slight modifications that aren't visible unless you hold the pieces next to each other to compare them. Being pallet wood they have that rustic feel and do not need to be precise in thei

 

Turn Table Legs without a Duplicator
By: Dread Knot Woodshop
July 09, 2019 · 330 views

In this video, I show how I made one of 4 table leg extensions using a shop made story stick and calipers. Amazon Affiliate links: NOVA 5015 Live Center System - https://amzn.to/2MJ3tVk NOVA 23055 Supernova 2 Chuck - https://amzn.to/2WEATcc NOVA 9020 7/8” Flexible Point Drive Center - https://amzn.to/2WEATcc NOVA JS100N - 100mm Jaw Set - https://amzn.to/2WEATcc Robust 9” Comfort Tool Rest - https://amzn.to/2XNamG0 Robert Sorby 3/8' Fingernail Spindle Gouge - https://amzn.to/2Sb6TPS Robert Sorby 3/8” Parting Tool - https://amzn.to/2LLE2jZ Carter and Son’s 3/4” Skew Chisel - https://amzn.to/2YK8TRt Big Horn Caliper set - https://amzn.to/2LITixP Credits Music by Joakim Karud http://youtube.com/joakimkarud, https://soundcloud.com/joakimkarud and Julian Avila https://soundcloud.com/julian_avila Movin - https://soundcloud.com/joakimkarud/joakimkarud-bluewednesday-movin Take Care - https://soundcloud.com/julian_avila/takecare Ocean - https://soundcloud.com/joakimkarud/ocean

 

Bed leg
By: Jamie Ferrell Woodturning
June 23, 2019 · 3 views

 

Hand wood turning stair spindles - Wood turning
By: Wood Drak
March 17, 2019 · 50 views

Stair Balusters Spiral Twist Carved Wood Spindles Banisters Staircase Railing in Home & Garden, Home Improvement, Building & Hardware eBay Since there are several pieces to be turned, the time-consuming process of simply marking the centers would be a good place to find a time saver. In the case of these stair spindles, the turned portion is in the center leaving square stock (pommels) at each end for fixing to the stair runners and railing. Always measure from the same end, marking the turned portion and the end of the pommel cut. These marks will appear as a solid

 

Jim Rodgers Lesson 10, Turning for furniture.
By: David Bentley
March 13, 2019 · 55 views

This video is about Jim Rodgers Lesson 10, Jim Rodgers Woodturner, Turning for furniture, Jim Rodgers Woodturning Teacher, Using Woodturning Tools, Duplicating furniture items by Woodturning, Duplicating turned wood pieces, Woodturning Tools, James Rodgers, Woodturner, Jim Rodgers Lesson 10, Turing for Furniture, Jim Rodgers Lesson 10

 

Turning a pair of custom table pedestals.
By: Steve Stover Studios
February 18, 2019 · 161 views

Woodturning a matching pair of custom wood table pedestals. Starting with Maple glue-ups that weighed over 200 lbs and using my electric winch to mount on my wood lathe.

 

Woodturning BUN feet for furniture
By: Kuffys Woodwork
December 31, 2018 · 1,023 views

Woodturning bun feet for a TV unit. Thanks for watching. #woodwork #woodworker #woodworking Stay up to date with what I am doing, or get in touch with me via Social Media. https://www.instagram.com/kuffyswoodwork/ https://www.facebook.com/kuffyswoodwork/ https://twitter.com/kuffyswoodwork - - - - - - Check out one of my best videos: 'Wooden Jewellery Box' https://www.youtube.com/watch?v Mp3soxzdmis Remember to subscribe to keep up to date with my latest and greatest builds. Thanks - - - - - -

 

Table legs
By: Jamie Ferrell Woodturning
October 05, 2018 · 3 views

 

FredScallionSpindle
By: West Island Woodturners
September 29, 2018 · 32 views

In this video, Fred makes a replacement staircase spindle

 

Hand turning Tulipwood (American Poplar) stair spindles.
By: Matthew Richardson
July 29, 2018 · 188 views

Hand turning one of a batch of 56 stair spindles 900 x 57 x 57mm, using just a roughing gouge, skew chisel and spindle gouge. After turning, the spindles were spray finished white to the customer's specification.

 

Turned Table with an EpoxyTop # 135
By: The Wood Whirler
June 12, 2018 · 1,519 views

Back in the saddle again. Thought I would try something different. Enjoy

 

Verandah posts
By: Ian Robbo Robertson
March 22, 2018 · 538 views

Turning verandah posts from start to finish.

 

Woodturning Legs
By: Rich McNatt
February 11, 2018 · 367 views

 

Svarvat Bord Woodturned Table Woodturning
By: Elias Klingvall
January 26, 2018 · 400,591 views

Svarvat segment bord gjort av Valnöt, Lönn och Jatoba Bordet är 75 cm högt och 50 cm i diameter Gammelgarn Ängmans Snickeri Gotland Woodturned segmented table made of Walnut, Maple and Jatoba

 

Making Small Drawer pulls
By: woodturner21
January 20, 2018 · 3,448 views

I posted this on social media and was well received so have posted it for all here. It is often the small jobs that test your tool control the most.

 

Amazing turning hand crafted dining table leg
By: wooden Turner
December 26, 2017 · 75 views

Wooden turning dining legs

 

Turning of wooden sofa leg
By: wooden Turner
December 26, 2017 · 204 views

Hand crafted wooden sofa leg turning

 

Amazing Wooden turning of chair's leg
By: wooden Turner
December 22, 2017 · 132 views

Dining chair leg,skills satisfaction

 

Amazing Turning of Center table pillar
By: wooden Turner
December 18, 2017 · 124 views

Wooden 8*8 2 fit long woode pillar turning

 

Wooden table legs turning
By: wooden Turner
December 17, 2017 · 126 views

Wooden table legs

 

Hand crafted wooden leg [ India bethak] turning wood
By: wooden Turner
December 14, 2017 · 812 views

Legs of India bethak in Indian way of turning wood

 

Century Porch Post -Table leg re-shaping
By: Century Porch Post
October 29, 2017 · 127 views

Century Porch Post is re-shaping an order of maple table begs

 

Making several wood baluster spindles on woodturning lathe
By: Jake Gevorgian
August 07, 2017 · 4,911 views

In this brief video I am demonstrating how I make a couple of baluster spindles in 5 minutes. Basically, I have not spent any additional time for depth measuring. The reason behind it is that the wood blanks had identical dimensions and all of them were marked with a pencil for start and stop cuts. The remaining shaping was calculated using eye sight and lining up of the tools and tool dimensions. For example, once cutting the initial chamfer, I then use a parting tool to shape the first bead, then I used a spindle gouge to cut the cove and stop cutting the cove as soon as the width was near the width of the chisel. Everything else becomes self-distant. I think that as far as the accuracy of being identical goes, it's about 97-99% accurate, however, since balusters are set at least 4 inches apart (30 of them in total,) this minor discrepancy can't be noticeable with a bare eye.

 

Woodturning Bathroom Sinks
By: SG Art Turning
June 01, 2017 · 127,055 views

Patreon : https://www.patreon.com/sgartturning Email : simgadoury@gmail.com You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

Maple and Walnut Entry Table / Woodworking Project
By: Carl Jacobson
May 12, 2017 · 35,122 views

I used Maple and Walnut for the top, and 1/2 pipes for the legs. The Walnut is inlayed in the top to separate the two Maple pieces about 1/2'. I turned the three Walnut pieces on the lathe, and cut out the Maple to fit them in. My Etsy shop: https://www.etsy.com/shop/Thewoodshoptv Patreon: https://www.patreon.com/CarlJacobson Website http://www.thewoodshop.tv/ Instagram: https://www.instagram.com/carljacobson/ Facebook https://www.facebook.com/carljacobson68 I'm a Robust dealer if you have any questions I'd be more than happy to help. Robust Woodturning Tools-http://www.turnrobust.com/ Easy

 

Como hacer una pata para una silla parte 1 de 7 - Arte en Torno
By: Arte en Torno
April 30, 2017 · 3,178 views

Cesar nos explica como establecer un proceso ordenado y coherente cuando nos enfrentamos a una producción en serie y exigente por la gran cantidad de medidas en consideración.

 

Como hacer una pata para una silla parte 2 de 7 - Arte en Torno
By: Arte en Torno
April 30, 2017 · 2,306 views

Cesar nos explica como establecer un proceso ordenado y coherente cuando nos enfrentamos a una producción en serie y exigente por la gran cantidad de medidas en consideración.

 

Como hacer una pata para una silla parte 3 de 7 - Arte en Torno
By: Arte en Torno
April 30, 2017 · 2,432 views

Cesar nos explica como establecer un proceso ordenado y coherente cuando nos enfrentamos a una producción en serie y exigente por la gran cantidad de medidas en consideración.

 

Como hacer una pata para una silla parte 4 de 7-Arte en Torno
By: Arte en Torno
April 30, 2017 · 5,801 views

Cesar nos explica como establecer un proceso ordenado y coherente cuando nos enfrentamos a una producción en serie y exigente por la gran cantidad de medidas en consideración.

 

Como hacer una pata para una silla parte 5 de 7 - Arte en Torno
By: Arte en Torno
April 30, 2017 · 1,721 views

Cesar nos explica como establecer un proceso ordenado y coherente cuando nos enfrentamos a una producción en serie y exigente por la gran cantidad de medidas en consideración.

 

Como hacer una pata para una silla parte 6 de 7-Arte en Torno
By: Arte en Torno
April 30, 2017 · 3,967 views

Cesar nos explica como establecer un proceso ordenado y coherente cuando nos enfrentamos a una producción en serie y exigente por la gran cantidad de medidas en consideración.

 

Como hacer una pata para una silla parte 7 de 7-Arte en Torno
By: Arte en Torno
April 30, 2017 · 1,928 views

Cesar nos explica como establecer un proceso ordenado y coherente cuando nos enfrentamos a una producción en serie y exigente por la gran cantidad de medidas en consideración.

 

Make A End Table With An Off-Center Post/ Woodturning Project
By: Carl Jacobson
April 14, 2017 · 11,342 views

I made this end table for the Tool Masters challenge. The table is made out of Myrtle wood Maple, and Walnut. It's 23' tall and 15' in diameter. I turned the center post off-center on the lathe. Tool Masters Association: https://www.izzyswan.com/tma-carl/?wpam_id 3 Mike Urquhart: http://www.simplyamazingwood.com/ I upload a new project video every Friday, and I'm live Monday, Wednesday, and Friday. Check out my Twitch channel. https://www.twitch.tv/carljacobson Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every

 

Mueble para la diana de dardos
By: Miguel Sanchez Woodworks
March 27, 2017 · 1,086 views

Este video ya se subio a mi otro canal, pero creo que este es su lugar correcto, y fue parte de la razon por la que he decidido orientar este canal a proyectos de carpinteria sencillos, asi que espero que os guste. Canal principal con Proyectos cada Martes: Main channel with new projects every Tuesday: https://www.youtube.com/user/Drizztss Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez www.tornoartesano.es miguel@tornoartesano.es

 

Verandah Post
By: Ian Robbo Robertson
March 26, 2017 · 212 views

Verandah post. Normally I do big stuff but every now and again a small job comes in. 1/12th scale verandah posts for a dolls house.

 

Turning Large Pedestal Base Outboard on Lathe
By: Classic Woodworks
March 14, 2017 · 354 views

Luke, our lathe operator at Classic Woodworks of Mi is turning a 36' cherry base for a table pedestal for a custom order for a customer. The pedestal portion will be turned between centers and then put together for the completed base. Contact us for custom quotes. www.classicwoodworksofmi.com

 

Turning a pedestal table leg for lamp table
By: woodturner21
March 10, 2017 · 7,001 views

This shows how I copy turn this was the second of two.

 

Wooden Feet
By: Erick Wood
February 15, 2017 · 39 views

So my kids broke the leg on the couch. It was cheap and plastic so I replaced it with one I turned from black walnut. Enjoy and please subscribe. Links Facebook: WoodShed Designs Instagram: @woodsheddesigns @sheturnswood @shop.woodsheddesigns Etsy: ErickWood

 

How to hand turn a Dog Toe Foot Stool Leg
By: woodturner21
January 15, 2017 · 4,782 views

This quick video shows how I turn a Dog Toe Leg for a foot stool

 

Table Legs On A Lathe experiment
By: Jerry Paul
January 13, 2017 · 1,309 views

Its been a while since I've posted anything, so I thought I'd post this one that I shot in late December. I had planned to shoot one for the first week in January to ring in the new year with, but I ended up with the flu instead. I'm getting over it now, so it shouldn't be long before I start cranking out new videos. HAPPY NEW YEAR!!

 

2 January 2017
By: station oak woodturning
January 01, 2017 · 171 views

 

Mid Century Modern Feet For A Couch
By: Kyle Toth
December 23, 2016 · 20,291 views

These Mid Century Modern couch legs are made in maple which I turned on a wood lathe. I made them for a client who wanted to give his couch a different look. This is not my typical video, I'm working some really cool stuff so hang tight. More cool projects to come! If you would like to support me and help me make more videos check out https://www.patreon.com/woodbytoth I also post weekly shop update videos of what i'm working on. All the support I can get really helps me out and allows me to take the time to build things like this! Thanks! For inquiries and commissions contact woodbytoth@gma

 

Woodturning turning a baluster
By: Charlie Woodturner
December 04, 2016 · 141 views

Turning a baluster by hand on my old Hyco lathe

 

Woodturning a huge pedistal
By: Bond Hinson
November 16, 2016 · 68 views

This could take some time

 

Hand turning Oak stair spindle (x8 speed)
By: Matthew Richardson
September 25, 2016 · 291 views

Hand turning 57x900mm oak stair spindle (sped up version)

 

Woodturning Oak Newel Post (x8 Speed)
By: Matthew Richardson
September 25, 2016 · 1,243 views

Production hand turning 140mm square oak newel post .

 

Production hand woodturning 3 legs under 5mins real speed.
By: woodturner21
September 22, 2016 · 5,524 views

PLEASE DO NOT COPY MY METHODS You are responsible for your own safety in your workshop Just a quick video to show turning KD Beech taper legs. The sq is R/S as it will be covered by upholstery

 

Woodturning oak newel cap
By: Matthew Richardson
September 16, 2016 · 848 views

Hand turning 140mm newel caps (or pendant in this case) from European Oak

 

Hand turned oak stair spindle
By: Matthew Richardson
September 16, 2016 · 8,223 views

Turning one, of batch of 140, 57x57x900 stair spindles in European Oak

 

Drawer & Cabinet Knobs
By: Jeremy Edwards
September 04, 2016 · 412 views

My wife and I love to do things ourselves, so we painted and re-did some stuff in our kitchen. One of my tasks was to make some custom and unique drawer and cabinet knobs. She likes stuff that is funky and so do I. So it didn't matter if they were all the same color or the same size. This is what i came up with. Enjoy!

 

Walnut Entryway Table
By: Kyle Toth
August 25, 2016 · 65,126 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4... This walnut table was made from an air dried slab. The base has a band of ebony that wraps around the bottom. Its stands 30 inches tall, 18 inches deep and 50 inches long. The top is made in walnut with quartz on the sides. If you would like to support me and help me make more videos check out https://www.patreon.com/woodbytoth For inquiries and commissions contact woodbytoth@gmail.com To keep up with my work throughout the week check out the links below. Thanks for watching! Love Tōth Also if you want to know why I love

 

Turning A 50lb Walnut Pedestal
By: Kyle Toth
August 15, 2016 · 31,382 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4... Check out my podcast The Dusty Life https://itunes.apple.com/us/podcast/the-dusty-life-podcast/id1073476072?mt 2 This Walnut Pedestal Is for a entry way table that I am making. The turning is made up of five 10/4 layers. It weighed about 50 pounds when I stared. The final video will be out soon! Thanks for watching! If you would like to support me and help me make more videos check out https://www.patreon.com/woodbytoth For inquiries and commissions contact woodbytoth@gmail.com To keep up with my work throughout the week

 

١٥ أغسطس، ٢٠١٦
By: Ahmed wood turner
August 14, 2016 · 38 views

 

Como hacer una columna cacheteada parte 3 de 3 - Arte en Torno
By: Arte en Torno
June 12, 2016 · 19,552 views

Cesar nos explica desde Arte en Torno, como obtener magníficos contrastes entre maderas y una geometría fantástica con solo pegar simétricamente algunos trozos de maderas.

 

Como hacer una columna cacheteada parte 2 de 3 - Arte en Torno
By: Arte en Torno
June 12, 2016 · 34,165 views

Cesar nos explica desde Arte en Torno, como obtener magníficos contrastes entre maderas y una geometría fantástica con solo pegar simétricamente algunos trozos de maderas.

 

Como hacer una columna cacheteada parte 1 de 3 - Arte en Torno
By: Arte en Torno
June 11, 2016 · 18,665 views

Cesar nos explica como obtener magníficos contrastes entre maderas y una geometría fantástica con solo pegar simétricamente algunos trozos de maderas.

 

Woodturning Fancy Rustic Table Upcycle
By: Custom Chris
May 29, 2016 · 1,964 views

Viter Energy Mints Sugar free, wintergreen, 40mg caffeine per mint, B-vitamins Enter discount code 'CustomChris' for 10% off a 6 pack at website, http://www.goviter.com

 

A quick KD American Oak coffee table leg real time unedited
By: woodturner21
May 28, 2016 · 39,364 views

A video of me hand turning a standard coffe table leg

 

Turning A Table from Pallet Wood on the Lathe
By: Tommy Akridge Designs
May 08, 2016 · 2,701 views

My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Spandrel Turning
By: Century Porch Post
April 06, 2016 · 280 views

1 1/2' diameter x 8' long turned spandrel.

 

Como tornear la pata para un mueble parte 2 de 3 - Arte en Torno
By: Arte en Torno
February 26, 2016 · 4,559 views

Cesar nos explica como identificar procesos cuando se va a tornear elementos muy precisos y en serie. Madera: Teca cultivada para su explotación.

 

Como tornear la pata para un mueble parte 3 de 3 - Arte en Torno
By: Arte en Torno
February 26, 2016 · 4,887 views

Cesar nos explica como identificar procesos cuando se va a tornear elementos muy precisos y en serie. Madera: Teca cultivada para su explotación.

 

Como tornear la pata para un mueble parte 1 de 3 - Arte en Torno
By: Arte en Torno
February 25, 2016 · 2,241 views

Cesar nos explica como identificar procesos cuando se va a tornear elementos muy precisos y en serie. Madera: Teca cultivada para su explotación.

 

#3 Hablemos de torneado, noticias, trucos, preguntas y respuestas
By: Miguel Sanchez Woodworks
February 19, 2016 · 3,160 views

Canal principal con Proyectos cada Martes: Main channel with new projects every Tuesday: https://www.youtube.com/user/Drizztss Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez www.tornoartesano.es miguel@tornoartesano.es

 

Woodturned Chandelier
By: DrexlFlo
February 12, 2016 · 596 views

I had to make a new ceiling lamp for my bedroom. So of course I decided to turn one. Please subscribe to my channel: https://www.youtube.com/subscription_center?add_user DrexlFlo Facebook: https://www.facebook.com/drexlflo/ Twitter: https://twitter.com/drexlflo/ Instagram: https://www.instagram.com/drexlflo/ Music: 'Inner Light' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

#2 Hablemos de torneado, noticias, trucos, preguntas y respuestas
By: Miguel Sanchez Woodworks
February 12, 2016 · 3,317 views

Canal principal con Proyectos cada Martes: Main channel with new projects every Tuesday: https://www.youtube.com/user/Drizztss Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez www.tornoartesano.es miguel@tornoartesano.es Pasta abrasiva: https://www.youtube.com/watch?v MvYbvRnLhb8 Glen Lucas: https://www.youtube.com/watch?v 7NaBnaMnLJI&spfreload 10

 

#1 Hablemos de torneado, Saludos, concurso logo, regalo patreon, y mas
By: Miguel Sanchez Woodworks
February 05, 2016 · 2,572 views

Canal principal con Proyectos cada Martes: Main channel with new projects every Tuesday: https://www.youtube.com/user/Drizztss Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez www.tornoartesano.es miguel@tornoartesano.es

 

Como tornear un balaustre sin luneta - Arte en Torno
By: Arte en Torno
November 22, 2015 · 11,736 views

Cesar nos explica como generar un balaustre sin luneta mediante la técnica del corte (Sesgo) y el desbaste (Gubia).

 

#94 Woodturning Table Legs Part 2 of 2
By: Stephen Ogle
September 21, 2015 · 3,913 views

Woodturning table legs tutorial style project in real time. Explaining my methods for turning four table legs from a picture. Part 1: https://www.youtube.com/watch?v Od8fa_-P2Jw

 

#93 Woodturning Table Legs Part 1 of 2
By: Stephen Ogle
September 21, 2015 · 8,948 views

Woodturning table legs tutorial style project in real time. Explaining my methods for turning four table legs from a picture.

 

Hand woodturning simple cabinet feet
By: woodturner21
August 11, 2015 · 3,026 views

The skill required to be a production woodturner is to be fast and accurate. This shows two 80mm feet being made.

 

Turning 1 3/4' soft maple stair balusters
By: Kim Vedros
August 10, 2015 · 136 views

We are turning 1 3/4' soft m,apple stair balusters for a customer in TN. This is the style they wanted. http://www.archturnings.com http://www.stair-newels.com http://www.architectural-wood-turnings.com

 

Baluster Pedestal Table Base turned on wood lathe.
By: Classic Woodworks
July 31, 2015 · 4,504 views

13' Baluster style pedestal table base turned on wood lathe at Classic Woodworks of Mi

 

DREXELN: 9 Woodturning Pillar - 99 sec. FAST MOTION
By: Drexeln
May 24, 2015 · 274 views

Geschwindigkeit / Speed: 3.756 % weitere Informationen unter: https://www.drexeln.de/schaubar/ https://amzn.to/2T59Q49

 

Möbelfuß drechseln aus Buche 2/2
By: Drechseln mit MP Martin Preller
May 24, 2015 · 911 views

über YouTube Capture

 

Möbelfuß drechseln aus Buche 1/2
By: Drechseln mit MP Martin Preller
May 20, 2015 · 1,664 views

über YouTube Capture

 

Como hacer un balaustre a partir de una tabla 2 de 2 - Arte enTorno
By: Arte en Torno
May 14, 2015 · 14,238 views

Cesar nos explica como hacer un balaustre plano a partir de una tabla y no de un cilindro como es habitual mediante la técnica del torneado longitudinal. Herramientas empleadas: gubia y sesgo.

 

Como hacer un balaustre a partir de una tabla 1 de 2 - Arte enTorno
By: Arte en Torno
May 14, 2015 · 9,125 views

Cesar nos explica como hacer un balaustre plano a partir de una tabla y no de un cilindro como es habitual mediante la técnica del torneado longitudinal. Herramientas empleadas: gubia y sesgo.

 

Como hacer una campanita de madera- Arte en Torno
By: Arte en Torno
May 10, 2015 · 100,327 views

Cesar nos explica como hacer una campanita en madera a través de la técnica del torneado de copa utilizando el sesgo y la gubia.

 

Como hacer una tiradera para un cajón o una puerta-Arte en Torno
By: Arte en Torno
May 03, 2015 · 9,791 views

Cesar nos explica de manera sencilla y clara como se hace una tiradera para un cajón o una puerta.

 

Como hacer el cuadrante en una pata para una mesa-Arte en Torno
By: Arte en Torno
May 03, 2015 · 151,431 views

Cesar nos explica como hacer el cuadrante para una pieza torneada y algunos consejos para tener en cuenta como norma de seguridad a la hora de presentar este tipo de torneado.

 

Como hacer un árbol con el sesgo - Arte en Torno
By: Arte en Torno
April 21, 2015 · 9,766 views

Cesar nos muestra de manera sencilla como se hace un árbol en el torno, utilizando el sesgo y la gubia.

 

Hand woodturning a standard 90mm softwood newel post
By: woodturner21
April 17, 2015 · 4,368 views

This video of me turning a newel post is NOT a tutorial, please note the methods are perfected by 35 years experiance and are dangerous if not executed correctly. All Woodturners should take responsible safety precautions to protect their health.

 

Turned Legs For A Collaboration Miniature Table
By: Gord Rock
April 04, 2015 · 546 views

Cherry legs turned for a miniature desk built in collaboration with therandomwoodworker. Check out therandomwooworker's channel here: https://www.youtube.com/channel/UCg28X-7SZ_47ojGLICHaiaQ This is the link to Part 1 of the Miniature Table: https://www.youtube.com/watch?v QD3GgdigXr8

 

DREXELN: 9 Woodturning Pillar - FAST MOTION
By: Drexeln
March 27, 2015 · 4,010 views

weitere Informationen unter: https://www.drexeln.de/schaubar/ https://amzn.to/2T59Q49

 

Como hacer una pata cónica - descentrada parte 2 de 2
By: Arte en Torno
March 27, 2015 · 18,256 views

Cesar nos explica como generar una pata conica con un solo descentrado obteniendo una superficie perpendicular entre sus caras y en la cara opuesta ( a 180 ) una línea oblicua. Este diseño de pata, se emplea en muebles que no tienen mucha altura con respecto al piso.

 

Como hacer una pata cónica - descentrada parte 1 de 2
By: Arte en Torno
March 27, 2015 · 7,026 views

Cesar nos explica como generar una pata conica con un solo descentrado obteniendo una superficie perpendicular entre sus caras y en la cara opuesta ( a 180 ) una línea oblicua. Este diseño de pata, se emplea en muebles que no tienen mucha altura con respecto al piso.

 

Como hacer una esfera con un dispositivo parte 3 de 3 - Arte en Torno
By: Arte en Torno
March 21, 2015 · 92,578 views

Cesar nos explica como hacer una esfera mediante un dispositivo, construido de manera sencilla, este dispositivo nos da para tornear esferas máximo de 9 cm de diámetro.

 

Como hacer una esfera con dispositivo parte 2 de 3 - Arte en Torno
By: Arte en Torno
March 21, 2015 · 25,367 views

Como hacer una esfera con dispositivo parte 1 de 3 - Arte en Torno Cesar nos explica como hacer una esfera mediante un dispositivo, construido de manera sencilla, este dispositivo nos da para tornear esferas máximo de 9 cm de diámetro.

 

Como hacer una esfera con dispositivo parte 1 de 3 - Arte en Torno
By: Arte en Torno
March 21, 2015 · 37,143 views

Cesar nos explica como hacer una esfera mediante un dispositivo, construido de manera sencilla, este dispositivo nos da para tornear esferas máximo de 9 cm de diámetro.

 

Turning Cedar Columns
By: Kim Vedros
March 08, 2015 · 440 views

These are Western Red Cedar Columns made for a customer in San Antonio. The column profile reproduces existing columns on an older home. They measure 8 inches X 10 feet long. The lathe is a hydraulic copy lathe and as such traces an aluminum template on the back side (not well seen in the video) Two columns were split in half to attach to respective walls on the end of two porches. http://www.archturnings.com http://www.stair-newels.com http://www.architectural-wood-turnings.com

 

hand woodturning a coffee table leg
By: woodturner21
February 25, 2015 · 45,417 views

This is a standard 95mm softwood coffee table leg that are produced for a company who paint them shabby chic style. Feel free to ask any questions.

 

عمود خشب لباب شقة -Wood colum
By: Ahmed wood turner
February 05, 2015 · 979 views

I created this video with the YouTube Slideshow Creator (http://www.youtube.com/upload)

 

رجل غرفة نوم -leg
By: Ahmed wood turner
February 04, 2015 · 237 views

I created this video with the YouTube Slideshow Creator (http://www.youtube.com/upload)

 

قاعدة خشبية
By: Ahmed wood turner
February 04, 2015 · 112 views

I created this video with the YouTube Slideshow Creator (http://www.youtube.com/upload)

 

فيديو0002
By: Ahmed wood turner
February 02, 2015 · 75 views

my first video

 

Como hacer una pieza torneada a partir de un plano 2de2
By: Arte en Torno
January 18, 2015 · 73,980 views

Nos encontramos en el taller de Arte en Torno donde Cesar le explica a un grupo de aprendices como tornear una pieza a través de un plano, utilizando sesgo y gubia, por la técnica de corte y desbaste respectivamente.

 

Como hacer una pieza torneada a partir de un plano 1de2
By: Arte en Torno
January 18, 2015 · 13,136 views

Nos encontramos en el taller de Arte en Torno donde Cesar le explica a un grupo de aprendices como tornear una pieza a través de un plano, utilizando sesgo y gubia, por la técnica de corte y desbaste respectivamente.

 

Halterung für eine Vorhangstange [HD]
By: Tiroler Drechsler
January 15, 2015 · 1,891 views

Um den Vorhang in einem unserer Zimmer zu montieren fertige ich in diesem Video eine Halterung an. Diese drechsle ich aus einem Stück Kirschholz. Die Vorhangstangenendstücke die in den Fotos am Ende dieses Videos auch zu sehen sind werde ich in einem extra Video noch zeigen. Endstücke: https://www.youtube.com/watch?v ARGgRqek3Ag ____________________________________________________ Kamera: Sony Xperia Go Have fun! \( _ )

 

Spiral Post Top (sawdust rd. woodshop)
By: Johnny Boudreau
November 16, 2014 · 440 views

Here is short video of me making the spiral on a post top. I screwed up most of the turning footage. (Camera on my phone was oriented the wrong way.) The turning was quite uneventful. But if you do find you have trouble turning spruce lumber, I'm sure your not the only one :) the best way I find; is getting it close to what you want, then 50 grit sandpaper. I'm not to worried about chip and things after all I gonna be outside in the weather. But do make sure you use proper respiratory protection while sanding and cutting wolmenised (pressure treated Lumber). This is part of a post for my 91

 

Turned Table Leg - Watch it made.
By: Century Porch Post
November 14, 2014 · 1,133 views

Our very popular Colorado style table is being turned on our modern wood lathe. This actual turning is made from poplar ( a native American hardwood known for its excellent strength and stability.) It paints or accepts wood stain beautifully.

 

Newel Post
By: Century Porch Post
February 26, 2014 · 594 views

10' diameter x 3' thick material. Lots of material waste but a nice finished custom piece.

 

TURNING A TABLE LEG with Sam Angelo
By: WYOMINGWOODTURNER
December 17, 2013 · 33,722 views

Sam turns 4 table legs. He shows the process for making the legs as identical as possible. This video shows some great closeup and excellent video work.

 

Woodturning a table leg.
By: Matthew Richardson
November 16, 2013 · 163 views

Turning one of a batch of simple farmhouse style table legs.

 

#64 Falsas columnas
By: Miguel Sanchez
November 12, 2013 · 40,543 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Una tecnica sencilla para enbellecer estanterias y puertas, espero que os guste http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Baluster- Century Porch Post- Simply the Best
By: Century Porch Post
October 22, 2013 · 1,019 views

Very popular style in turned balusters. This piece is 3' square x 24' in length. They are available in various widths and lengths and wood species. This turning is in clear pine ( an excellent exterior grade wood )

 

Spanish Cedar Columns
By: Kim Vedros
September 09, 2013 · 434 views

For more info visit http://www.archturnings.com These 8' columns range in height from 9' 6' to 11' 4 ' on overall length. We opted to join them end to end using a 2 1/4' dowel. My lathe will handle the over all length but thought it would be difficult to machine the wood in preparation for laminating. http://www.archturnings.com http://www.stair-newels.com http://www.architectural-wood-turnings.com

 

5' inch turned legs
By: oreos40
August 26, 2013 · 563 views

modified crossfeed. beefed up because the original wasn't ridged enough. These are birch. 35 1/2' long and 5' in diameter. the lathe is DIY, made from scratch, or Home made whichever you may prefer.

 

Porch or Verandah Spindle
By: Century Porch Post
August 12, 2013 · 601 views

Nicely designed wood spindle. Looks absolutely incredible on a large porch.

 

Woodturning Lathe Projects - BUN FEET X 4
By: WoodChipsCC
August 08, 2013 · 1,491 views

Chests and cabinets need these easy to turn feet. Make them four at a time. SHARPENING LATHE CHISELS http://youtu.be/MLPtZA-6hbg

 

Turned Wood Spandrels
By: Century Porch Post
April 16, 2013 · 748 views

Turned Decorative Spandrels - 1 3/4' square x 10' in length. Top and Bottom rails are available. visit www.centuryporchpost.com

 

Turning Large Pedestal at Classic Woodworks
By: Classic Woodworks
January 12, 2013 · 8,720 views

Classic Woodworks is turning a large pedestal for our customer on our lathe. This is actually done in 2 working days shortened to 4 minutes. Enjoy! www.classicwoodworksofmi.com

 

Newel Post Project Medium
By: Mike Marek
October 23, 2012 · 424 views

A customer needed four (4) Newel Posts made to specifications of the original posts from an 18th Century townhouse being renovated in Arlington Va. The original post was solid mahogany and since mahogany of that size is not available or affordable today the architect changed the staircase to white painted posts with mahogany buttons and rails. The posts were recreated from poplar and the buttons from African Mahogany. Here is a slide show of the work on a replica of the original post.

 

fakupa tetővel
By: demeterlaszlo55
June 10, 2012 · 13,008 views

Feketedióból

 

Making Furniture Legs â ” Woodturning
By: Jake Gevorgian
June 04, 2012 · 6,359 views

This video is brought to you by Palo Arte; http://www.paloarte.com The wood I used is Opeche (known as white mahogany)

 

Barley Twisted Stair Baluster
By: Kim Vedros
May 05, 2012 · 1,150 views

This is one of my more popular stair balusters. It measures 1 3/4' at the squares and is turned from soft maple. The twist is called a barley twist. http://www.archturnings.com http://www.stair-newels.com http://www.architectural-wood-turnings.com

 

Barley twisted island legs
By: Kim Vedros
May 05, 2012 · 168 views

These alder kitchen island legs measure 7' X 34'. There were turned for a custom in Arizona. http://www.archturnings.com http://www.stair-newels.com http://www.architectural-wood-turnings.com

 

7 1/4' X 11' columns with chamfer and Lambs Tongue
By: Kim Vedros
May 05, 2012 · 463 views

These are columns I made for a local contractor. They required fairly deep chamfers (1 1/2' wide) and so I chose to knock the corners off on my lathe as well as turn the lambs tongue. I then flatted the chamfer with my router and cleaned up with a chisel. http://www.archturnings.com http://www.stair-newels.com http://www.architectural-wood-turnings.com

 

Fluted Stair Baluster
By: Kim Vedros
May 05, 2012 · 195 views

Here I am turning a stair baluster and milling 8 flutes for a customer in Mass. The wood is soft maple and measures 1 3/4' at the square. http://www.archturnings.com http://www.stair-newels.com http://www.architectural-wood-turnings.com

 

Barley Twisted Island Legs
By: Kim Vedros
May 05, 2012 · 465 views

This video depicts turning and milling a barley twisted Kitchen Island Leg on my hydraulic copy lathe. The turning is in Alder and measures 5' X 35'. http://www.archturnings.com http://www.stair-newels.com http://www.architectural-wood-turnings.com

 

Rope Twisted Columns
By: Kim Vedros
May 05, 2012 · 846 views

This video depicts turning and milling a rope twist on an 11 inch X 50 inch poplar column. The columns were first glued up into hollow octagons. Plywood caps were placed on the ends to facilitate turning and milling. http://www.archturnings.com http://www.stair-newels.com http://www.architectural-wood-turnings.com

 

Baluster Turning
By: Kim Vedros
May 05, 2012 · 578 views

This is custom wooden stair baluster turning on my Wema Hydraulic copy lathe. For more info see http://www.archturnings.com

 

Make a bedside table
By: JGwoodshop
April 09, 2012 · 1,929 views

Make a nice bedside table, mainly using the lathe. Simple project, you can get one done in a day.

 

Woodturning Decorative Table Leg.wmv
By: Century Porch Post
November 14, 2011 · 2,633 views

CNC Woodturning a hard ' curly ' maple table leg. 1 3/4' square x 36' long. Custom design for a design firm.

 

Rope Twisted Newel in cherry
By: archturn
November 11, 2011 · 436 views

For more info visit http://www.archturnings.com In this video I am making a test piece for the stair newels inspired in this magazine image. I produced two of these in cherry. The bases will receive a recessed panel applied by the contractor

 

Arte en Torno - Frutero
By: Arte en Torno
October 31, 2011 · 19,591 views

Frutero de mesa de 45cm de diámetro. Maderas: Pino Radiata, Nazareno, Cedro, Roble y Almendro. Técnica: Torneado transversal o de plato.

 

2 1/4' poplar stair balusters
By: archturn
September 05, 2011 · 272 views

For more info visit http://www.archturnings.com These were custom made for a closed stringer stairway. As such they are only 30' tall (2 1/4' wide). The bottoms will be cut on an angle in the field.

 

Oszlop csúcs
By: demeterlaszlo55
September 04, 2011 · 3,146 views

 

Korlátoszlop befejezése.
By: demeterlaszlo55
August 19, 2011 · 1,512 views

 

Korlátoszlop
By: demeterlaszlo55
August 03, 2011 · 11,482 views

Az oszlop gőzölt bükkből készült.És mivel ebben a méretben ez nagyon rezeg,a felvételen látható lünettát készítettem hozzá.Ha 1-5ig osztályozni kellene,csak 3-ast adnék rá.Nagyobb fogásnál a lünetta is berezeg.

 

Szekrényláb.
By: demeterlaszlo55
June 19, 2011 · 3,460 views

 

Arte en Torno-Espiral en columna de madera
By: Arte en Torno
March 04, 2011 · 155,360 views

Nos encontramos en el taller de Arte en Torno torneando o tallando tres espirales pasantes en una columna de cedro. Maquina diseñada y construida por mi profesor Cesar Perez.

 

Rope Twisted House Columns
By: archturn
December 17, 2010 · 819 views

These house columns are 10 and 12 inches in diameter and 8 feet tall with the caps and bases. They start out as hollow octagons. www.archturnings.com

 

Woodturning
By: Classic Woodworks
October 27, 2010 · 137,535 views

Classic Woodworks of MI. turning a custom spindle for a client. http://www.classicwoodworksofmi.com Call us for your custom turning needs. Thanks to Kodiak Era for letting us use their music.

 

Turning a 9' post
By: GJJoinery
October 13, 2010 · 1,332 views

Turning a 9' post at GJJoinery

 

Custom Wood Turnings
By: archturn
August 23, 2010 · 130 views

Some of the woodturnings featured on http://www.archturnings.com

 

Turning a decorative newel post
By: GJJoinery
August 13, 2010 · 4,125 views

Gjjoinery turning a newel post

 

Turning Practice
By: Peter Galbert
August 03, 2010 · 71,840 views

Practicing a repeatable method for turning baluster legs helps make a complex chair part more simple to make

 

bun foot video.wmv
By: davedalbywoodturning
May 03, 2010 · 595 views

Copy turning bun feet on one of our copy lathes. We make thousands of these, still it keeps us off the streets!

 

Arte en Torno - Torneado de espiral en madera
By: Arte en Torno
April 08, 2010 · 628,261 views

Estamos en Arte en Torno con mi profesor Cesar Perez, haciendo una demostración con uno de los grpos de aprendices de arte en torno de como se hace una espiral en elementosde madera. La máquina diseñada y construida por mi profesor. Cualquier información adicional comunicarse a: arteentorno@hotmail.com victoracheagos@hotmail.com

 

Arte en Torno - Torneado de columna en madera Parte 12/12
By: Arte en Torno
March 18, 2010 · 12,277 views

Manejo de gubia y sesgo

 

Arte en Torno - Torneado de columna en madera Parte 11/12
By: Arte en Torno
March 18, 2010 · 25,360 views

Elaboracion de la bola superior de la columna

 

Arte en Torno - Torneado de columna en madera Parte 10/12
By: Arte en Torno
March 18, 2010 · 7,217 views

utilizacion del sesgo para proporcionar mejor acabado a la pieza

 

Arte en Torno - Torneado de columna en madera Parte 9/12
By: Arte en Torno
March 18, 2010 · 5,590 views

Desbaste del cuerpo central de la columna con la gubia

 

Arte en Torno - Torneado de columna en madera Parte 8/12
By: Arte en Torno
March 18, 2010 · 11,201 views

Torneado de la parte superior de la columna

 

Arte en Torno - Torneado de columna en madera Parte 7/12
By: Arte en Torno
March 18, 2010 · 13,549 views

Pulido de la pieza con el sesgo para lograr mejor acabado.

 

Arte en Torno - Torneado de columna en madera Parte 6/12
By: Arte en Torno
March 18, 2010 · 34,280 views

Manejo de la gubia.

 

Arte en Torno - Torneado de columna en madera Parte 5/12
By: Arte en Torno
March 18, 2010 · 12,205 views

Elaboracion de bocel con el sesgo

 

Arte en Torno - Torneado de columna en madera Parte 4/12
By: Arte en Torno
March 18, 2010 · 3,719 views

Toma de medidas para las diferentes artes de la pieza

 

Arte en Torno - Torneado de columna en madera Parte 3/12
By: Arte en Torno
March 18, 2010 · 2,967 views

Manejo del sesgo

 

Arte en Torno - Torneado de columna en madera Parte 2/12
By: Arte en Torno
March 18, 2010 · 3,979 views

torneado de columna de madera - Cilindrado del cudrante

 

Woodturning: Bun Foot 3/3
By: duunari81
November 02, 2007 · 26,536 views

Bun foot made of African Mahogany (Khaya ivorensis). Part 3.

 

Woodturning: Bun Foot 2/3
By: duunari81
November 02, 2007 · 134,823 views

Bun foot made of African Mahogany (Khaya ivorensis). Part 2

 

Woodturning: Bun Foot 1/3
By: duunari81
November 02, 2007 · 22,903 views

Bun foot made of African Mahogany (Khaya ivorensis). Part 1

 

Return to Turning Videos

Great Bargains
(ends November 27, 2019)


Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase

 


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase


Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Great Bargains
(ends December 24, 2019)


Denim Woodturner's Apron

On Sale for only $17.99

Save $12.00

List price: $29.99

This is a one-size fits all, heavy duty denim apron with a soft-cloth collar and criss-cross shoulder straps. It even includes a pencil pocket.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Sorby 6-Piece Woodturning Set with Book and DVD (Woodturning: A Foundation Course)

For only $229.99

Save $100.00

List Price: $329.99

Robert Sorby's flagship set of turning tools is designed to fill the needs of woodturners from beginner to professional. These high-quality tools will shorten the learning curve for those just starting out, and are sure to impress the seasoned woodturner. The set comprises six of Robert Sorby's core range of tools: a roughing gouge, spindle gouge, bowl gouge, skew, parting tool and scraper. Each tool is crafted from the highest quality high speed steel, and married to a comfortable handle turned from solid ash. The set arrives in a high quality box that provides an attractive presentation as a gift, and practical storage thereafter.

Click here for more information or to purchase


Dust Right® Lathe Dust Collection System

For only $39.99

Save $20.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase


Excelsior Mini Lathe

For only $229.99

Save $70.00

List Price: $299.99

The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200 RPM. Cast-iron body provides mass for minimal vibration, stable turning and maximum durability.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodturning Tool Store
Saburrtooth
Woodturning Online

(Click any Ad to go to our Sponsor's Website)