Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Hats Videos (25)

Sort by

Or click here to: Search All Videos


Der Holzkurs Wie mache ich Schlitz und Zapfen? Traditionelle Holzverbindung Episode 14
By: Andreas Achleitner
January 19, 2018 · 983 views

Salve! In der heutigen Folge unseres Holzkurses stellen wir eine Schlitz- und Zapfen Verbindung her. In meinen Videos verwende ich folgende Werkzeuge: Fugzwingen http://amzn.to/2BNy3E1 Ponal Holzleim http://amzn.to/2BAprUE Schleifpapier http://amzn.to/2ByYl09 Druckluftschleifer http://amzn.to/2DgSXj4 Bosch PTS 10 Kreissäge http://amzn.to/2pa8Tgh Holzmann VD 1100 Drechselbank http://amzn.to/2BQDAtH Drechselmesser Set http://amzn.to/2DljLxz Scheppach Hobelmaschine http://amzn.to/2BVAgA1 Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Die Themenbereiche u

 

Tornear Sombrero Segmentado Caoba y Arce Project 89
By: Andreas Achleitner
January 17, 2018 · 231 views

Hola amigos! Hoy he hecho un sombrero de mi viejo puerta de entrada. Primero, hice algunos segmentos de caoba, pegados y girados uno tras otro en el torno en la forma. ¿Cómo te gusta? En mis videos utilizo las siguientes herramientas Tornillos http://amzn.to/2BNy3E1 Pegamento http://amzn.to/2BAprUE Papel de Lija http://amzn.to/2ByYl09 Lijadora http://amzn.to/2DgSXj4 Bosch PTS 10 Sierra http://amzn.to/2pa8Tgh Holzmann VD 1100 Torno http://amzn.to/2BQDAtH Herramientas de Torneado http://amzn.to/2DljLxz Scheppach Cepilladora http://amzn.to/2BVAgA1 Mi nombre es Andreas Achleitner

 

Wood Turning a Segmented Hat Mahogany and Maple Project 89
By: Andreas Achleitner
January 17, 2018 · 472 views

Hello my friends! Today I turned a hat out of my old front door. First, I made a few mahogany segments, glued and turned one after the other at the lathe into shape. Do you like the hat? In my videos I use following tools Clamps http://amzn.to/2BNy3E1 Glue http://amzn.to/2BAprUE Sanding Paper http://amzn.to/2ByYl09 Grind Machine http://amzn.to/2DgSXj4 Bosch PTS 10 Table Saw http://amzn.to/2pa8Tgh Holzmann VD 1100 Lathe http://amzn.to/2BQDAtH Gouches http://amzn.to/2DljLxz Scheppach Planer http://amzn.to/2BVAgA1 My name is Andreas Achleitner and I like to work with wood. The

 

Drechseln Hut drechseln aus Mahagoni und Ahorn Project 89
By: Andreas Achleitner
January 17, 2018 · 2,053 views

Hallo Freunde! Heute habe ich mir aus meiner alten Haustüre einen Hut gedrechselt. Zuerst habe ich mir ein paar Mahagoni Segmente hergestellt, verleimt und nacheinander an der Drechselbank in die richtige Form gedreht. Wie gefällt er euch? In meinen Videos verwende ich folgende Werkzeuge: Fugzwingen http://amzn.to/2BNy3E1 Ponal Holzleim http://amzn.to/2BAprUE Schleifpapier http://amzn.to/2ByYl09 Druckluftschleifer http://amzn.to/2DgSXj4 Bosch PTS 10 Kreissäge http://amzn.to/2pa8Tgh Holzmann VD 1100 Drechselbank http://amzn.to/2BQDAtH Drechselmesser Set http://amzn.to/2DljLxz S

 

A Wyomingwoodturner COWBOY HAT by Sam Angelo
By: WYOMINGWOODTURNER
November 20, 2016 · 14,577 views

Sam turns a small 'cowboy' hat for a local fundraiser: The Festival of Trees. Using a piece of very wet Honey Locust, he take the viewer, step by step, through the process of making this hat. And....Sam encourages all men over 50 to get that colonoscopy!!! He did and so should you. For an expert on turning hats, here is a link to JoHannes Michelsen: https://www.youtube.com/channel/UCUjhlHzGBsuE42vRFdPX5Eg

 

Tokar Art 56 Woodturning Magic Hat
By: Dipa Das
November 28, 2015 · 1,555 views

 

woodturned hat stand
By: Peter Matthew
July 25, 2015 · 404 views

This week I turned a stand to put my hat on. The stand was made out of black walnut and finished with danish oil. I turned the stand in three parts-the base, the spindle, and the top. The parts were joined together with a mortise and tenon joints. If you enjoyed the video, please like! ----------------------------------------------------------------------------------------------------------------contact me: peterturnswood@gmail.com Visit my eBay store: www.ebay.com/usr/dste6080

 

Bowler Hat Bowl For Woodturning Club Demo
By: As Wood Turns
July 10, 2015 · 4,270 views

http://www.AsWoodTurns.com I made this segmented bowl in preparation for a segmented turning demo at Williamette Woodturners. Bryan wanted an introduction to segmented turning with a hat theme. The introduction included both open and closed segmented process to create this bowl. In response, we selected a bowler had with both closed and open segments. The hat's brim is a special challenge as it is a narrow area to turn. This bowl is walnut with nine rings: 6 closed segment rings and 3 open segment rings. Closed segment rings have 12 segments. Open segment rings have 18 segments. Inlcuding the

 

Turning a Cowboy Hat
By: IKI Woodturners
May 07, 2015 · 29,600 views

Eric Gourieux demonstrates how to turn a Cowboy hat on the lathe. 4/11/2015 IKI Wood Turners club meeting.

 

Le PicBois #9 - Hackberry Dumbass Hat
By: Le PicBois
April 13, 2015 · 2,614 views

[ How to make a natural edge hackberry bowl ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois ________________________________________________________ Special Thanks: Easy Wood Tools: https://www.youtube.com/user/EasyWoodTools Carl Jacobson: https://www.youtube.com/user/haydenHD ________________________________________________________ I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.com/us/cgi-bin/webscr?cmd _flow&SESSION Eqxer72hzstD4emcu5OgZQyXm9I2ypT2k-PiYKNyeyKlNpjGC7vCQoHglh8&dispatch 5885d80a13c0db1f8e263663d3faee8d96f000117187ac9edec8a65b311f447e

 

Wood Turning #77 The Mad Hatter's Fir Hat
By: The Tiny Trailer Workshop
June 13, 2014 · 1,573 views

The Mad Hatter's Fir Hat This is an experiment in working with dry Fir... Unlike the other hats I have done, which have been green and tended to warp nicely after turning... this one just stays the way it was turned! It could be used for a decorative touch to a Teddy Bear or it could be used as a pencil pot... It is actually amazing how many ways these can be used... Some day I am going to have to try a full sized one! Practice Practice Practice!!! Thanks for watching Larry

 

Wood Turning #77 Texted The Mad Hatters' Fir Hat
By: The Tiny Trailer Workshop
June 13, 2014 · 488 views

The Mad Hatter's Fir Hat This is an experiment in working with dry Fir... Unlike the other hats I have done, which have been green and tended to warp nicely after turning... this one just stays the way it was turned! It could be used for a decorative touch to a Teddy Bear or it could be used as a pencil pot... It is actually amazing how many ways these can be used... Some day I am going to have to try a full sized one! Practice Practice Practice!!! Thanks for watching Larry

 

Wood Turning #68 Texted A Top Hat
By: The Tiny Trailer Workshop
April 30, 2014 · 788 views

Hello and welcome to another adventure in Arbutus! This Arbutus is still pretty green and so once you have finished turning you can watch nature at its best! I was lucky with the Bowler, in that it didn't crack at all! This one however... reminded me that I hadn't taken the top down thin enough and it started to split! Well I filled the crack with some of that Arbutus flour that had accumulated and covered that with a little thin CA glue... I then put it back on the jamb chuck... interestingly enough... you will recall that the piece came off this chuck already... so I thought I would be sma

 

Wood Turning #68 A Top Hat
By: The Tiny Trailer Workshop
April 30, 2014 · 1,265 views

Hello and welcome to another adventure in Arbutus! This Arbutus is still pretty green and so once you have finished turning you can watch nature at its best! I was lucky with the Bowler, in that it didn't crack at all! This one however... reminded me that I hadn't taken the top down thin enough and it started to split! Well I filled the crack with some of that Arbutus flour that had accumulated and covered that with a little thin CA glue... I then put it back on the jamb chuck... interestingly enough... you will recall that the piece came off this chuck already... so I thought I would be sma

 

Turning Miniature Wood Hats
By: DentonTurners
April 13, 2014 · 17,842 views

Kevin Felderhoff shows us how he makes wood hats on the lathe. In this demo, Kevin makes a mini-hat but the techniques extend to making full size ones. This was recorded April 2014 at the monthly meeting of the Golden Triangle Woodturners in Denton, Texas. We meet on the first Monday of each month at 7PM in the Center for the Visual Arts in Denton. Find more about us at www.goldentrianglewoodturners.org

 

Wood Turning Halloween Witch Hat
By: Carl Jacobson
October 31, 2013 · 5,310 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

woodturning a Halloween Hat
By: Robbiethewoodturner
October 01, 2013 · 2,503 views

hers another one i made a while back about a hat i turned for a bit of fun for the kids halloween I would like to say tanks to all for there concerns about me i am well and hope to be back turning soon This video was produced and made by Robbie power Copyright All Rights Reserved

 

45 - Jerry Measimer - Mini-Hat Workshop - 22 Sept 2012
By: Waxhaw Woodturners
January 21, 2013 · 1,301 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Daniel Brinneman http://www.lionsdendesigns.com Video by Daniel Brinneman. https://danielbrinneman.com

 

WGNC Jerry Measimer Wood Hat demo Intro
By: weekendturner.com
April 17, 2011 · 1,234 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. In this clip Jerry talks about his history and early experiences in woodturning. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 1 of 5
By: weekendturner.com
April 17, 2011 · 3,857 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 5 of 5
By: weekendturner.com
April 17, 2011 · 6,413 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 4 of 5
By: weekendturner.com
April 17, 2011 · 1,611 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 3 of 5
By: weekendturner.com
April 17, 2011 · 1,855 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 2 of 5
By: weekendturner.com
April 17, 2011 · 2,003 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

Burl Cutting For Woodturning Johannes Michelsen Woodhat
By: JoHannes Michelsen
September 07, 2008 · 22,486 views

http://johannesmichelsen.com Johannes Michelsen the creator of the Woodhat shows his woodturning students how to most efficiently cut-up a beautiful burl with the intention to create a custom woodhat on the lathe. At the Johannes Michelsen School of wood turning you learn more than just woodturning. This video shows you how to get the best yield out of your burls using the Chainsaw before you even bring it inside the shop. Enjoy. http://www.hannestool.com

 

Return to Turning Videos

Powered by Google

Great Bargains on Sale until July 5, 2018


Starter Pen Turning Kit

On Sale starting at $59.99 each

Save $10.00


List price normally starts at $69.99

All the essentials you need for pen turning, including 3 blanks, 3 hardware kits and a Pen Mill Kit with four pilot shaft sizes.

Click here for more information or to purchase


Pen-Turning Ergonomic Carbide Turning Tools, 3-Piece Set

On Sale for only $109.99 each

Save $30.00


List price: $139.99

Compact, comfortable rubber handles provide excellent control and reduce fatigue—replaceable carbide tips need no sharpening.

Click here for more information or to purchase


Customized Electric Branding Iron Gift Set

On Sale for only $99.99 each

Save $20.00 each


List price: $119.99

Personalized branding iron gift set lets your favorite woodworker customize their own design and message.

Click here for more information or to purchase


Excelsior Mini Lathe

On Sale for only $199.99 each

Save $100.00


List price: $299.99

With solid cast-iron construction, a robust 1/2 hp motor and a precision-machined live center, this little workhorse rivals features found in much larger lathes.

Click here for more information or to purchase


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodturning with Tim
Saburrtooth
From Walnut to Antlers

(Click any Ad to go to our Sponsor's Website)