Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Hollow Form Categories

 

Vases and Vessels Videos (807)

Sort by

Or click here to: Search All Videos


Woodturning a huge floor vase - without a steady rest.
By: Peter Woodbine
February 05, 2018 · 1,720 views

Woodturning a large floor vase without any support from a steady rest. I did not wish to buy or make a steady rest for one project so I had a go at this large vase with no support. Quite scary at times but managed to get there in the end turning very carefully. I got some new stickers. Anyone fancy a sticker swap, send me your details on a private message and I'll get you one in the post. Masking tape and super glue trick from Ben at Crimson Guitars :- https://www.youtube.com/user/CrimsonCustomGuitars Music by Epidemic Sound (http://www.epidemicsound.com) Video edited with Premiere Elements 18

 

A Touch Of Gold
By: John Clothier
February 04, 2018 · 707 views

A Touch of Gold. Inspired by the work of Mark Sanger. In this project video you will see how I turned this from Sycamore. It was hollowed and shaped before using a router to carve splits up either side. Then it was textured with a dremel. Finally over to the bench for decorating with acrylic paint and gold leaf. MY WEBSITE https://www.johnclothier.co.uk FOLLOW ME ON FACEBOOK https://www.facebook.com/JohnClothierUK/ FOLLOW ME ON INSTAGRAM https://www.instagram.com/JohnClothierUK/ FOLLOW ME ON PINTEREST http://pinterest.com/JohnClothierUK

 

точение внутренней полости, кап ясенелистного клена
By: Vladimir Drozdov | Woodturning | lignum vitae workshop
February 04, 2018 · 10 views

Точение не то чаши с натуральной гранью, не то полой формы из капа ясенелистного клена по сырому. Теперь месяцы естественной сушки, и можно будет продолжать. Точение полых форм не самый интересный процесс для видео, потому как происходит 'вслепую', можно сказать - 'на ощупь' - кончиком резца. https://vk.com/tochenoederevo

 

Woodturning The shaping of a vase lesson Part 1 by Al Furtado
By: Rebel Turner
February 04, 2018 · 2,654 views

The shaping of a vase lesson Part 1 Tom comes over for another lesson. The question is who is getting the best lesson here? Join me in fb. https://www.facebook.com/TheRebelTurner Email me at alfurtado@rebelturner.com Follow me on Twitter https://twitter.com/AlbertFurtado57 Yorkshire grit at http://yorkshire-grit.com/Product-Page/ Quality lathe tools Carter and Son tools www.carterandsontools.com

 

sinker cypress vase
By: Rons Woodturning shop
February 03, 2018 · 188 views

A small 7' vase using sinker cypress and my Simple Hollowing System jig.

 

Woodturning - A Grotty Piece of Plywood into a Vase
By: Andy Phillip
February 03, 2018 · 29,286 views

Turning a grotty piece of plywood into a vase with epoxy stripes .. I was inspired to try this after seeing some work by Sarah Thirlwell who does some great turning using plywood and acrylics ... https://www.etsy.com/uk/shop/AndyPhillipHandmade

 

Woodturning - Making a Funky Green Vase. Using Easy Wood Tools
By: Nick Zammeti NZ WoodTurning
January 31, 2018 · 10,497 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ EASY WOOD TOOLS http://www.easywoodtools.com/ MAKEIT SOPH https://www.youtube.com/channel/UCy2WZ1h9A_qKMR_zVXSeTug MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ RANDOM LINKS https://www.youtube.com/watch?v M62SnbNizIM https://en.wikipedia.org/wiki/Willy_Wonka_%26_the_Chocolate_Factory CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE I

 

Пропитка маслом полой формы из сувели дуба
By: Vladimir Drozdov | Woodturning | lignum vitae workshop
January 31, 2018 · 4 views

Пропитка маслом полой формы из сувели дуба. В комплекте немалый объем внутренней 'пещеры', натуральные грани от выпавшей коры, множество свилеватых узоров, горлышко в обрамлении овангкола, относительная невесомость https://vk.com/tochenoederevo

 

modern segmented vase μοντερνο βαζο
By: Μάκης Καλτσίδης
January 30, 2018 · 110 views

modern segmented vase - μοντερνο βαζο

 

Woodturning an eccentric hollow form from olive wood !!!
By: Kostas Annikas Deftereos
January 27, 2018 · 3,980 views

This time i was a bit confused about what to make ! So i take a piece of olive wood and i start to make something ! A new idea comes to my mind and so come out a Eccentric Hollow Form !!! I hope you enjoy it !!! See you next Sunday !!!

 

Vase made from a single 2 x 4
By: Turntastic Wood Designs
January 27, 2018 · 156 views

A nice vase made from a single 2 x 4. I'm really proud of this one.

 

Woodturning -The Ash & Resin Vessel ( Slot Vase )
By: Andy Phillip
January 26, 2018 · 11,472 views

Turning a piece of ash into a vessel with red epoxy slots !! https://www.etsy.com/uk/shop/AndyPhillipHandmade

 

Woodturning an elm vase
By: Boston Woodturning
January 23, 2018 · 203 views

Woodturning an elm vase

 

Indian blanket feature ring
By: earl's small segment shop
January 21, 2018 · 1,057 views

How to make the indian blanket feature ring

 

Woodturning Oak and Hamp vase (fixed)
By: Yuval Lahav Woodturning
January 20, 2018 · 3,388 views

Well, Youtube has messed something up and I had to reupload this old video (my 8th woodturning video), so this is the second of two 'Blast from the past' videos I'm reuploading at the moment. It's an oldie, but a goody ;) Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in thi

 

Woodturning Opepe Winged Bowl / Vase (fixed)
By: Yuval Lahav Woodturning
January 20, 2018 · 2,050 views

Well, Youtube has messed something up and I had to reupload this old video (my 4th woodturning video), so this is the first of two 'Blast from the past' videos I'm reuploading at the moment. It's an oldie, but a goody ;) Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this

 

Woodturning at 54a. #131.Zips n Laces
By: Keith Barrow
January 19, 2018 · 3,029 views

2 vases this week,made out of Yew,with a similar theme,again using the Harrison hollowing rig. If you want to save a small fortune on polish,just do what I did,a quick YouTube search on how to make it! In this video I used: Yorkshire Grit: www.yorkshire-grit.com Harrison hollowing rig: https://www.harrisonspecialties.com For Seggys,or a Centre-finder,please go to: www.woodturningat54a.com

 

Coloring A Handmade Wooden Hollow Form With Alcohol Inks
By: DeadTreeWoodWorks
January 17, 2018 · 402 views

In this video I paint an ash wood hollow form with alcohol inks. Link To Finished Piece - https://www.etsy.com/listing/587406361/ My Etsy Shop - https://www.etsy.com/shop/deadtreewoodworks Links To Inks/Finish - https://www.woodturnerscatalog.com/p/148/6187/Artisan-Premium-Coloring-Dye?0&term artisan dye http://www.joann.com/alcohol-ink-blending-solution-2-oz/8591356.html#prefn1 prod_type&prefn2 brand&prefv1 Product&prefv2 Tim%20Holtz&start 1 http://www.joann.com/tim-holtz-adirondack-alcohol-ink-mixative/prd35645.html http://www.joann.com/tim-holtz-adirondack-alcohol-ink/prd53032.html https://www.homedepot.com/p/Rust-Oleum-Painter-s-Touch-2X-12-oz-Gloss-Clear-General-Purpose-Spray-Paint-249117/100670438

 

Segmented Vase
By: Billy Burt
January 16, 2018 · 23 views

I started this segmented hollow form (720 pieces) before I started getting serious about making videos so it is a patchwork of video and stills. But it still shows enough about the process I use for my segmented turnings. There will likely be more of these in the future.

 

Omas Urne drechseln neu, segmented woodturning grandmas urn, same projekt, new video
By: Al G
January 16, 2018 · 148 views

Das Holz ist vermutlich Meranti. Es sind die Schnittreste unseres Terrassenbelages, die ich noch im Keller hatte. Da ich nur vier Gurtspanner hatte, hat das Leimen der Ringe viel Zeit in Anspruch genommen. Gegen Ende habe ich dann die Ringe mit der Bandsäge vor dem Leimen schon rund gemacht, dies hat das Drechseln erleichtert. Insgesamt habe ich an 8 Tagen jeweils gesägt, geleimt und/oder gedrechselt. Der Schnitt dieses nicht gerade kunstvollen Videos hat dann auch noch einmal einen weiteren Tag in Anspruch genommen, da ich das erst ausprobieren musste. Ich habe den ersten Versuch auch Online, der ist mit deutlich mehr Zeitraffer und dafür aber vollständiger. Dass mir der Deckel nicht kaputt gegangen ist, ist riesiges Glück. 13:34 Die Innenmaße für die Aschekapsel sind Höhe 22,5 cm, Breite unten 15,0 cm und Breite oben 17,5 cm. Mal sehen, ob es passt.

 

Odd design forces reshape by Al Furtado
By: Rebel Turner
January 14, 2018 · 4,688 views

Not being happy with design forces drastic changes to this piece

 

Natural Edge Maple Vessel - No Bark
By: Gord Rock
January 14, 2018 · 1,394 views

A natural edge maple vessel turned using a slightly different method of jam chucking to clean up the bottom.

 

Omas Urne drechseln - segmented woodturning urn
By: Al G
January 14, 2018 · 67 views

turning a segmented wooden urn

 

Woodturning Maple And Walnut Floating Vase
By: Carl Jacobson
January 12, 2018 · 16,812 views

In this video I turned a wooden vase on the lathe. I made this piece out of Maple and Walnut. It stands 8 1/2' tall and 5 1/2' wide. Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order TOOLS I USE IN MY SHOP: https://kit.com/CarlJacobson/woodturning https://kit.com/CarlJacobson/woodworking https://kit.com/CarlJacobson/camera-gear THANK YOU FOR SUPPORTING MY SPONSORS! Robust Woodturning Tools- http://www.turnrobust.com/ Easy Wood Tools- http://www

 

Woodturning - The Spalted Beech Hollow Form
By: Andy Phillip
January 12, 2018 · 10,475 views

Turning a Hollow Form Vessel from a piece of spalted Beech .. Thanks to Sue & Russ for the Beech xmas present definitely better than socks !! Sorry if you gave me socks !! https://www.etsy.com/uk/shop/AndyPhillipHandmade

 

Large segmented vase - Επιδαπέδιο βάζο
By: Μάκης Καλτσίδης
January 08, 2018 · 131 views

woodturning segmented vase made from lime cherry and ampouria. Βάζο δαπέδου φτιαγμένο από κομμάτια ξύλου κερασιάς φλαμούρι και αμπούρα.

 

Bubinga and Colored Epoxy Vase
By: Turntastic Wood Designs
January 06, 2018 · 268 views

A solid piece of bubinga and colored epoxy turned into a nice vase

 

Its all about the bark
By: Rich McNatt
January 06, 2018 · 423 views

Last night I decided to start a collection of ' mishaps ' throughout the year for a video at the end of the year. Then this morning... Enjoy!

 

Bark Faced Vase
By: Jim Ballard
January 05, 2018 · 406 views

Cherry Vase with bark on the face. Turned on a wood lathe from start to finish. Thanks to Michael White for providing the Music.

 

Woodturning - The Walnut & Wenge Segmented Vase
By: Andy Phillip
January 05, 2018 · 11,567 views

Turning a segmented vase from walnut and wenge ... https://www.etsy.com/uk/shop/AndyPhillipHandmade songs .. Foundation - Vibe tracks Sydney's Skyline - ALBIS

 

Black Oak Vase with Resin Inlay. Part 2 - Turning & Finishing
By: John Clothier
January 01, 2018 · 883 views

In this project I created a vase from black oak with a green resin inlay. In this the second of two parts I show you how the blank came out, turn it, colour it and finish it off. MY WEBSITE https://www.johnclothier.co.uk FOLLOW ME ON FACEBOOK https://www.facebook.com/JohnClothierUK/ FOLLOW ME ON INSTAGRAM https://www.instagram.com/JohnClothierUK/ FOLLOW ME ON PINTEREST http://pinterest.com/JohnClothierUK --------------------------------------------------------------------------------- MY EQUIPMENT --------------------------------------------------------------------------------- LATHE

 

Spalted oak vase
By: Rons Woodturning shop
December 30, 2017 · 278 views

Small vase with spalted oak. Got to use my hollowing jig and I think it turned out nice. 7' tall by 3.5' . Also used some home made abrasive paste using rottenstone with beeswax and mineral oil.

 

Black Vase with Resin Inlay. Part 1 - Making the Blank
By: John Clothier
December 30, 2017 · 761 views

In this project I created a vase from black oak with a green resin inlay. In this first of two parts I show you how I made the blank. MY WEBSITE https://www.johnclothier.co.uk FOLLOW ME ON FACEBOOK https://www.facebook.com/JohnClothierUK/ FOLLOW ME ON INSTAGRAM https://www.instagram.com/JohnClothierUK/ FOLLOW ME ON PINTEREST http://pinterest.com/JohnClothierUK

 

Woodturning Hollow Form in green beech
By: Undercover Woodworker
December 30, 2017 · 75 views

Initial turning of a fresh green beech log. Hollowed and left rough to allow it to dry slowly. Finished turning will be done in a future mission! Hollowing done with the Simon Hope tool: https://hopewoodturning.co.uk/tools-handles/hope-carbide-cutting-tools/13/hope-6-mm-pro-carbide-tool?c 11 Undercutting done with Rolly Munro tool : http://www.rollymunro.co.nz Music Credits: Hitman Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ District Four Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Sycamore Hollow Form - PLUS 1000 subscriber fun!
By: Turning Works
December 29, 2017 · 504 views

Hi everyone and THANK YOU for visiting - make sure you watch until the very end as there may be sexiness going on! Recently this channel hit 1000 subscribers which is not only amazing but a dream come true! I have been so humbled by the amount of people who watch my videos...and yet STILL return to watch more! This video was inspired by a chat I had with Adrian Moore at UKIWS - so it's thanks to you mate that this ever happened! Rob Nichols - what a man! So generous! https://www.facebook.com/rntimberturnings/?ref br_rs https://www.youtube.com/channel/UCABn0N4CUR0580p1hmFZmcQ Greg Dykes -

 

[ Onionwood ]우드터닝,woodturning,hollow vessel
By: Onion Woodturning workshop
December 23, 2017 · 20 views

http://blog.naver.com/hwno Instagram : onionwood 어니언우드( 목선반교육)

 

THE CHRISTMAS TINSEL VASE!
By: Nick Zammeti NZ WoodTurning
December 22, 2017 · 15,485 views

I made a Christmas tinsel vase using Christmas tinsel and mixed in with resin . MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECO

 

Walnut and Ebony Segmented Vase
By: Mike Boehmer
December 14, 2017 · 815 views

The vase was made from Peruvian Walnut & Ebony. Twenty one segments per ring and finished with General Finishes Arm R Seal. Please subscribe if you like the video, I'll try to post new projects as often as possible! Music by Epidemic Sound (http://www.epidemicsound.com)

 

Turning a Miniature Vase
By: Made by Brent
December 13, 2017 · 35 views

Hey this is just a short video of me turning a small hollow form. It was really fun.

 

Blue Hollow Form with Red Finiale
By: John Clothier
December 04, 2017 · 563 views

In this sped up video you can see how I made this hollow form. This was originally recorded just for my own viewing so I could look back and see where I went wrong and where I was right to try and improve my skills. I thought it would be interesting to share it with you all. There is no commentary or description of what is going on and it is sped up by 1500%.

 

Wood turning Box Elder Urn
By: Tommy Akridge Designs
December 03, 2017 · 2,129 views

This video is about making a Box Elder urn with glue finish Mark using PARFIX 3408 . https://youtu.be/8AzjdN7eaJk Mark Sillay https://youtu.be/OCikQVvx5P4 My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Walnut Segmented Vase With Chevron Feature Ring Part 2: Turning and Finishing The Vase
By: Nathan Cumming
December 03, 2017 · 5,608 views

In this video I start turning the segmeneted vase I've been preparing for a week. The finished vase consists of over 200 individual segments of Walnut, Cherry, Sapele and Idigbo with a solid Teak base. The final turning is done in stages as i finish a layer and glue the next one on. The finished piece is a beautiful vase with warm colour tones. It turned easily and finished superbly with Yorkshire Grit and Hampshire Sheen High Gloss. I hope you enjoyed this video. Thank you to my Subscribers! If you haven't Subscribed yet and you'd be interested in seeing more like this please visit my chann

 

Tokar Art - Woodturning 88 Vase Of Victory
By: Dipa Das
November 26, 2017 · 3,853 views

 

Walnut Segmented Vase With Chevron Feature Ring Part 1: Preparing the segments and Gluing Rings
By: Nathan Cumming
November 24, 2017 · 2,235 views

In this video I start a large segmented vase project. I designed this vase using software I purchased from Woodturnerpro.com (full link below) This software allows you to visualise what the segmented vase will look like once all the segments are cut and glued and makes the process far easier as you are able to print a cutting list for the bowl/vase you design. In this first part I use the printed summary sheet to mill the stock I have into strips the required width and thickness and then cut the individual segments. Once I have all the segments cut I glue them together into rings that will m

 

Making A Vase Called 'Scars'
By: John Clothier
November 19, 2017 · 483 views

This project video shows you how I created a vase that I called 'Scars'. 'Scars' was created to represent Self-Harm. The concept of someone that would harm themselves, the scars would heal but still be there with fresh ones just being added over the top. This video focuses mainly on the colouring and texturing. This is done with a rotary tool and an airbrush.

 

Woodturning a Vase within a Vase
By: Gary Wright
November 18, 2017 · 139 views

Woodturning a Vase within a Vase

 

Turned Cherry & Walnut Vessel
By: Gord Rock
November 17, 2017 · 2,034 views

Small turned vessel made with Cherry & Walnut. 4' diameter by 3' tall. Finished with Shellawax & Minwax Wipe-On Poly. Link to the Ubeaut website (makers of Shellawax): http://www.ubeaut.com.au/shell.html

 

100 Segmented Vases And Bowl Series
By: Kyle Toth
November 16, 2017 · 15,822 views

There are a few vases in this series still available. Check out http://woodbytoth.bigcartel.com/ Finish I Used: http://amzn.to/2ylBxek Sand Paper: http://amzn.to/2ylkR6Z http://amzn.to/2AseYWV Camera Gear 80D- http://amzn.to/2zIBoW5 lense- http://amzn.to/2ip2rwj Mic- http://amzn.to/2zNcbYn GoPro- http://amzn.to/2imvjFm Other Tools I use: Buffing Wheels: http://amzn.to/2xWSCLz Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Lathe Chuck- http://amzn.to/2zvQKx2 Drum Sander- http://amzn.to/2zaqSV9 Glue- http://amzn.to

 

oak crotch adventure
By: Rons Woodturning shop
November 09, 2017 · 890 views

You almost never know what wood will reveal. This one kept me changing my plans until the end!

 

Woodturning # 92 Cedar Hollow Form
By: Woodslee Summercraft
November 06, 2017 · 4,631 views

This is my first time using my new easy wood hollowing tools, i liked the ease of use, although my choice of wood presented issues, cedar is prone to tear out, i embellished with copper wire and contrasting burn lines. wall thickness approx 1/4' finished with Yorkshire grit and Hampshire sheen. visit my website http://www.woodsleesummercraft.ca

 

From Firewood to..... - Episode 104
By: Paul Lockwood
November 04, 2017 · 570 views

A piece of oak I picked up from the local mill that was being sold as firewood, which turned out into something quite nice. Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Calm Before The Storm- My 100th Segmented Vase
By: Kyle Toth
November 03, 2017 · 120,375 views

Finish I use: http://amzn.to/2h026Pe Buffing Wheels: http://amzn.to/2xWSCLz Tools I use: Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Drum Sander- http://amzn.to/2zaqSV9 Glue- http://amzn.to/2ytfS8f My 100th segmented vase is done! I started this series of 100 vases and bowls back in 2007. My neighbor let me borrow his mini lathe and said have fun, thats where it stared for me. This vase is called The Calm Before The Storm, it represents where I came from knowing nothing as a woodturner to me now as a woodturner and artist and to what

 

Woodturning Donut Vase from a Log
By: ThisWoodwork
November 03, 2017 · 10,995 views

Woodturning a hollow donut shaped vase from a log on the lathe. ----------------------------------------­---------------------------- Website: http://thiswoodwork.com/ Instagram: https://instagram.com/thiswoodwork/ Facebook: http://www.facebook.com/thiswoodwork Twitter: https://twitter.com/ThisWoodwork Google : https://plus.google.com/ Thiswoodwork ----------------------------------------­---------------------------- This woodturning project and video was built and filmed by Alex Harris. Copyright of Alex Harris, ThisWoodwork 2017

 

Woodturning - The Violet Vessel
By: Andy Phillip
November 03, 2017 · 53,007 views

Turned Sycamore and Violet coloured epoxy vessel ... https://www.etsy.com/uk/shop/AndyPhillipHandmade

 

Незаконченный проект (Unfinished project)
By: Аleksey Bek
November 01, 2017 · 371 views

Думал, что заготовка из осины и хотел выточить снеговика. Но оказалось , что это яблоня и я решил выточить бокал из двух частей. Выточил только верхнюю часть. Ножку буду точить из другой заготовки и клеить. Thought that harvesting of aspen and wanted to carve a snowman. But it turned out that this Apple tree and I decided to turn a glass in two parts. Machined the top side only. Foot, I shall cut from another blank and glue.

 

38 - Natural Edge Camphor Vase Part 2
By: Bill Rockwood
October 31, 2017 · 273 views

In this video I finish hollowing the natural edge camphor vase, using the hollowing tools and tool rests I made.

 

Woodturning-The Exothermic epoxy 11 wood spiral vase( FAIL )
By: Andy Phillip
October 27, 2017 · 474,430 views

As the title says things didn't go according to plan on this piece , I had a major resin fail !! Moisture condensed inside I think from the heat of the resin curing and the cold temp outside of the mould.I mixed to much resin at once which caused an exothermic reaction I don't know weather to turn it or not so if you comment TURN IT or BIN IT I'll do which ever you think .. Thanks for watching Sorry if you've already seen this video and commented but for some reason the quality wouldn't go above 360p so I had to re upload it .. Thanks

 

Black Walnut Hollow Form
By: John Clothier
October 22, 2017 · 462 views

In this project video I show you how I created a hollow form from Black Walnut

 

Woodturning- Spalted Birch Flower Vase
By: 207 Made
October 18, 2017 · 200 views

207made on facebook and Instagram feel free to comment and sub -Thanks!

 

Woodturning - The Stripe Vase's Little Friend !!
By: Andy Phillip
October 15, 2017 · 11,260 views

I turned this with the wood leftover from the stripe vase , but put the stripe horizontal , thought they might look cool as a pair ... I spelt Friend in the title on the video wrong on purpose by the way LOL !! https://andyphilliphandmade.etsy.com

 

Woodturning - The Stripe Vase
By: Andy Phillip
October 13, 2017 · 205,903 views

Turning a vase from Ash with an inlay stripe of offcuts ... https://www.etsy.com/uk/shop/AndyPhillipHandmade

 

#34 An Off-centre Vase with a Twist
By: Andrew Whale
October 11, 2017 · 1,377 views

An Off-centre Vase with a Twist! This is my very first attempt at off-centre turning and it was an interesting project to undertake. I used a spindle roughing gouge for all the shaping, but maybe I should have tried a bowl gouge as well? It turned out very well though and I'm really happy with the result. I hope you find this video interesting. I always like to try new things out if possible. If you have any questions or advice (eg helping me improve on my technique), please leave a comment. If you really like my videos, please subscribe to keep informed of new ones. Doing the old thumbs

 

Irma's cedar vase part 2
By: Mike Smith
October 10, 2017 · 13 views

This video is about Irma's cedar vase part 2 We pick. up where we left off, turning a vase from a cedar tree that was destroyed during the hurricane that hit Florida in September of 2017.

 

FAC!!! I thought it was dry enough
By: Rich McNatt
October 07, 2017 · 374 views

 

#90 Woodturning Segmented Vase
By: Yuval Lahav Woodturning
October 05, 2017 · 7,878 views

Well, I once said I want at least one of everything on my channel, so you all knew this was coming sooner or later. My very first segmented turning. Might be my last, but probably not... Wood-you believe it facebook page - https://www.facebook.com/Wood-You-Believe-It-177551562605290/ Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Re

 

37 - Camphor Natural Edge Fluted Vase
By: Bill Rockwood
October 02, 2017 · 527 views

Part 1 of 2 in turning a vase from Camphor, with natural edge and fluting.

 

Woodturning a Purple Heart Potpourri Hollow Form - Sorby Texturing tool #2
By: Nathan Cumming
October 01, 2017 · 506 views

In the is video I turn the second of my potpourri hollow forms using purple heart. Since I turned my first one I've practised with the texturing tool to understand more about how the angles effect the pattern that is produced. In this video i'm able to produce a flower pattern on the base and encase it in swirls. I also leave the rim a little wider so I can add a texturing detail to the top of the vessel. Thank you to my subscribers for following and supporting me. If you haven't yet Subscribed please do so, and check out the other videos on my channel. Thanks for watching! MUSIC CREDITED TO: Fantasy by Del https://soundcloud.com/del-sound Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) https://creativecommons.org/licenses/... Music provided by Audio Library https://youtu.be/84GNW_Mx7cU

 

Cross Grain Hollow Form With Fins
By: As Wood Turns
September 29, 2017 · 2,599 views

http://www.AsWoodTurns.com This hollow form is a combination project to explore a hollow form with fins in cross grain wood. The cherry is about half dry and could warp some but not a lot. I'm not counting on the project warping. The hollow form is mounted as cross grain and shaped. Then drilled out and hollowed but was not hollowed out to the final wall thickness. Instead I left the walls very thick (at this point). Then using a parting tool, I cut 1/8' grooves leaving 1/8' fins. My goal was to leave about 1/2' as a wall thickness between the bottom of the fin and the interior of the holl

 

No Genie in this bottle by Al Furtado
By: Rebel Turner
September 24, 2017 · 2,795 views

I turn a Cherry Genie style vase leaving a bit of bark for accent but the punky wood did the magic to this vase

 

A Vase of Unfulfilled Potential
By: RickTurns
September 22, 2017 · 1,302 views

In this video, I demonstrate how to destroy a might-have-been really nice vase. Oops.

 

Irma's cedar vase
By: Mike Smith
September 22, 2017 · 11 views

This video is about the turning of a cedar log that was harvested after hurricane Irma. I was not sure what to make out of it until I started turning it. It will be a vase when finished.

 

End Grain Hollowing by Dan Douthart
By: Gwinnett Woodworkers
September 19, 2017 · 4,703 views

Dan Demonstrates several techniques for end grain hollowing. June 10, 2017 Recorded and presented in HD mm-dd-yyyy Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Ficus vase with simulated Bark by Al Furtado
By: Rebel Turner
September 16, 2017 · 3,548 views

in this video I turn a small Ficus vase and focus attention to simulate some missing bark.

 

Woodturning a Purple Heart Potpourri Hollow Form - Sorby Texturing Tool #1
By: Nathan Cumming
September 16, 2017 · 462 views

In this video I turn the first of two Purple Heart blanks that I have and make a Potpourri Hollow Form with a Pewter lid. I also use the Robert Sorby Texturing and Spiralling Tool I recently purchased to add detail to the foot and inside of the vessel. Soon to follow will be another Purple Heart hollow form that will have a different detail on the base and possibly a different shape. These pieces are intended to be displayed for sale in a local craft shop. Thank you to all my Subscribers! If you haven't Subscribed yet please hit the Subscribe button and visit my channel to check out my other videos. I'm sure you'll find something of interest to you. MUSIC CREDITED TO: Fantasy by Del https://soundcloud.com/del-sound Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) https://creativecommons.org/licenses/... Music provided by Audio Library https://youtu.be/84GNW_Mx7cU

 

Woodturning- Simple Maple Flower Vase
By: 207 Made
September 15, 2017 · 109 views

207made on Instagram and on facebook, feel free to like comment and subscribe

 

E92: Turning a Shiny and Rough Coloured Sycamore Experiment
By: M. Saban Smith Woodturning
September 14, 2017 · 2,737 views

Have been missing turning since I got back from the Yandles show, so today I turned an experimental sycamore objet d'art thing. Coloured with Intrinsic Colours, textured with a dremel and then finished with Hampshire Sheen. I used a Robert Sorby 10mm Excelsior spindle gouge and 3/8' bowl gouge for the shaping of it. Quite like the shape from about half way up - not so keen on the bulge bit. The base is nice though but it may well not appear in version 2.. . ********************************** Visit my website for Hampshire Sheen, Intrinsic Colours, Witty Turner's Clothing and Gifts, Hints and

 

Woodturning large maple open form vessel
By: Boston Woodturning
September 09, 2017 · 240 views

Woodturning large maple open form vessel time lapse

 

#37 Wormy Maple Hollow Form
By: Austringer Creations
September 03, 2017 · 94 views

This is a hollow form bowl I turned from a block of maple I won in a raffle at the August meeting of the Northwest Georgia Wood Turner's in Rome, GA. My original plan was to make a mortar and pestle but turning revealed worm holes so I made a hollow form bowl instead and finished it with teak oil.

 

Woodturning - Very Large Segmented Vase
By: Josh Bayer
September 03, 2017 · 23,001 views

In this video from Bayer's Sawdust Factory, I glue up a turn a large segmented vase. The finished vase measures approximately 30' tall and 19' in diameter at the widest section. Thanks for watching. Subscribe to my channel for more wood turning videos in the future.

 

Awesome Art Woodturning - Technical Skill Extremely Skillful Of Woodworker
By: Woodworking Tools
September 01, 2017 · 260,336 views

Awesome Art Woodturning - Technical Skill Extremely Skillful Of Woodworker Thanks for watching, subscribe & share! Subscribe to channel: https://goo.gl/8vZEZZ

 

Multi Dimension Fin Vase Green Woodturning
By: As Wood Turns
September 01, 2017 · 4,056 views

http://www.AsWoodTurns.com After seeing a demo of this vase at my woodturning club, I searched for a good piece of wood. Ideally, it would be an entire round of freshly harvested wood. With wet wood, I could expect the fins to warp up and down randomly, adding to the visual effect of the fins. The process is fairly simple: 1. Rough turn the wood between centers 2. Cut a mounting tenon. The club demonstrator used a faceplate. 3. Mount to a chuck using the tenon. (or faceplate) 4. Tool the exterior but leave large for now. 5. Drill or hollow the interior. For an even more advanced vase, hollo

 

Hollowing.
By: Anatoly Tsiris
August 30, 2017 · 167 views

Woodturning videos.

 

Driftwood Vessel
By: Peaceful Woodturner
August 30, 2017 · 1,130 views

This video is largely a collection of fails but I like the end result. Some things I learned are to sharpen more frequently and to be less aggressive at times. In the end I have a pretty little piece and a lot more experience.

 

Coloured Lime Vase
By: John Clothier
August 26, 2017 · 1,457 views

In this project video I hollowed a vase from Lime Wood. I then coloured it with Intrinsic colours from Hampshire Sheen before a coat of wax.

 

Woodturning - The Cube Vase
By: Andy Phillip
August 25, 2017 · 1,572,134 views

Turning a Vase with a captive ring from a blank made up of cubes .. https://www.etsy.com/uk/shop/AndyPhillipHandmade

 

Woodworking Technical Wood Lathe Turning Big Trees - Making Vase Super Large
By: Woodworking Tools
August 21, 2017 · 2,139 views

Woodworking Technical Wood Lathe Turning Big Trees - Making Vase Super Large Thanks for watching, subscribe & share! Subscribe to channel: https://goo.gl/8vZEZZ

 

Macheeche square ring vase by Al Furtado
By: Rebel Turner
August 16, 2017 · 6,944 views

Square ringed vase has proven to be more challenging than it looks

 

Footed Wooden Vessels
By: Lee Burkholder
August 15, 2017 · 159 views

Cumberland Valley Wood Turners, footed wooden vessels, lathe, wood turning, turning,

 

Woodturning - Vase Oak Wood
By: Woodworking Tools
August 11, 2017 · 3,234 views

Woodturning - Vase Oak Wood

 

Заготовка из сырого дуба (Detail of raw oak)
By: Аleksey Bek
August 08, 2017 · 459 views

Взял красивый дубовый пенек и хотел из него что-нибудь выточить. Потом понял, что он сильно сырой. Сделал внутренне отверстие и отправил его на сушку. I took a nice oak stump and wanted something to grind. Then I realized that he was very raw. Made internally the hole and sent it for drying.

 

#87 Woodturning Spalted Oak Open Form
By: Yuval Lahav Woodturning
August 07, 2017 · 3,403 views

Starting to work down all my UKIWS loot, I'm going for a spalted Oak hollow form, with an African Black Wood as the lid and finial. I also crushed some turquoise stone to powder to fill in some cracks and voids with some CA glue. Enjoy! Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.reddit.com/user/aforeignitalia

 

How To Finish A Vase By Wood Woodworking Fastest Easy
By: Woodworking Tools
August 07, 2017 · 1,748 views

How To Finish A Vase By Wood Woodworking Fastest Easy

 

MAKING A VASE FROM SPECTRAPLY WOOD!
By: Nick Zammeti NZ WoodTurning
August 04, 2017 · 53,137 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CWP SPECTRAPLY WOOD https://www.cwp-usa.com/ DISCOUNT CODE IS NZWOODTURNING10 Bob from Iliketomakestuff https://www.youtube.com/user/iliketomakestuffcom BILL SIN WORKSHOP https://www.youtube.com/channel/UCNhGZkO3bL-n9Ca2IYFK1yQ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw MY NZ WOODTURNING EMBLEMS (r

 

010-05-05 WWRJF - RJF Hollower - Followup 5 years Later - 8 min 2017
By: Richard Ford
August 04, 2017 · 21 views

This is a followup 5 years later in 2017 I explain some of the things I have learned using the RJF Hollower. The conclusion is a slideshow of a few of the vases I have made in the last 5 years using the RJF Hollower. Originally Uploaded on Aug 5, 2017

 

010-04-05 WWRJF - RJF Hollower - Cutter Sketches - 2min 2012
By: Richard Ford
August 04, 2017 · 10 views

This is a slideshow of the cutters made from HSS Planer blades Remember you can pause the video to make notes. Originally Uploaded on Nov 29, 2012

 

010-03-05 WWRJF - RJF Hollower - Parts Sketches - 7min 2012
By: Richard Ford
August 04, 2017 · 11 views

This is a slideshow of all the parts needed for the RJF Hollower Body. Remember you can pause the video to make notes. Originally Uploaded on Nov 29, 2012

 

010-02-05 WWRJF - RJF Hollower - How I Built the RJF Hollower - 18min 2012
By: Richard Ford
August 04, 2017 · 18 views

Here I detail all the parts needed for an RJF Hollower. Originally Uploaded on Nov 29, 2012

 

010-01-05 WWRJF - RJF Hollower - Evolution of the RJF Hollower - 12min 2012
By: Richard Ford
August 04, 2017 · 8 views

The RJF Hollower is born. Here I demo the development of the hollowing system. With some thoughts on future improvements. Originally Uploaded on Nov 29, 2012

 

009-08-08 WWRJF - Hollowing a Gnarly Burl - Parting Off & Jam Chucking - 10min 2012
By: Richard Ford
August 04, 2017 · 12 views

I nearly lose it when parting off. Next I jam-chuck it and finish the base. The finished Vase. Originally Uploaded on Nov 29, 2012

 

Wodturning Miniature Walnut Hollow Form Scrap Wood Projects Woodworking
By: Turning With George
August 03, 2017 · 21 views

Making a miniature walnut hollow form from a scrap piece of wood. It is about 75mm in diameter and i finished it with paste bees wax over cellulose sanding sealer. ----------------------------------------------------------------------------------------------------------- Tools used: Hamlet 6mm (1/4 Inch) bowl gouge: http://www.goodtimber.com/cgi-bin/new... Axminster 25mm (1 Inch) Oval skew: http://www.axminster.co.uk/axminster-... Robert Sorby 2mm (1/16 Inch) Thin Parting Tool: https://www.amazon.co.uk/830SH-Robert... Axminster Drill Sander 50mm (2 Inch): http://www.axminster.co.uk/sof

 

009-07-08 WWRJF - Hollowing a Gnarly Burl - Sanding & Oiling - 4min 2012
By: Richard Ford
August 02, 2017 · 7 views

Sanding and Oiling the vase with inclusions and fragile sharp corners. Originally Uploaded on Nov 29, 2012

 

009-06-08 WWRJF - Hollowing a Gnarly Burl - Finish Hollowing - 11min 2012
By: Richard Ford
August 02, 2017 · 9 views

Finishing the hollowing the vase gets very fragile. Originally Uploaded on Nov 29, 2012

 

009-05-08 WWRJF - Hollowing a Gnarly Burl - Hollowing - 15min 2012
By: Richard Ford
August 02, 2017 · 11 views

Hollowing trying different cutters for roughing and finishing. Originally Uploaded on Nov 29, 2012

 

009-04-08 WWRJF - Hollowing a Gnarly Burl - A New Hollowing Tool - 18min 2012
By: Richard Ford
August 02, 2017 · 8 views

Hollowing, trying a new tool. Originally Uploaded on Nov 29, 2012

 

009-03-08 WWRJF - Hollowing a Gnarly Burl - Drilling - 5min 2012
By: Richard Ford
August 02, 2017 · 8 views

Drilling out as much as possible, Originally Uploaded on Nov 29, 2012

 

009-02-08 WWRJF - Hollowing a Gnarly Burl - Turning the Outside - 11min 2012
By: Richard Ford
August 02, 2017 · 10 views

Developing and turning the outside profile. Originally uploaded on Nov 29, 2012

 

009-01-08 WWRJF - Hollowing a Gnarly Burl - Setup & Turn the Outside - 16min 2012
By: Richard Ford
August 02, 2017 · 20 views

The initial setup then Turning the outside of the vase. During the process I test and develop a new hollowing tool. Originally Uploaded on Nov 29, 2012

 

Строптивая деревяшка (The obstinate piece of wood)
By: Аleksey Bek
August 01, 2017 · 911 views

Получилось целое кино о строптивой деревяшке. Сначала хотел сделать разделочную доску, но получилось очень тонко. Потом решил сделать тарелку, но проточил лишнего. И только на третий раз получилась ваза. The film is about a stubborn piece of wood. Started to make a cutting Board, but not enough thickness. Began to make cups and destroyed. And only on the third time got the vase.

 

Big Black Walnut
By: Jeremy Edwards
July 30, 2017 · 251,671 views

One giant chunk of Black Walnut turned into a pretty sweet vase that does not hold water. Enjoy

 

TK Turns - UFO Bowl
By: TK Turns
July 26, 2017 · 17 views

From a little lump of beech a visitor came. I have always been a little bit sceptical of the phrase 'the wood will tell you what it wants to be', but in this case it did. The original intent wasn't to make a flying saucer, but who can tell what mysterious forces are at work... Music: But Enough About Me, Bill Paxton by Chris Zabriskie is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/dtv/ Artist: http://chriszabriskie.com/ Parting Glass by Audionautix is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Woodturning a Lidded Vessel from Bubinga with Oak Finial
By: Nathan Cumming
July 23, 2017 · 684 views

In this video I enter my garage workshop and begin turning a piece of Bubinga into a Jewellery Box with lid and finial. This is my first attempt a this type of project. I begin my shaping a finishing the base so that it can't be reversed in the chuck and the lid can be pated off. Once parted the lid is finished to provide a reference for hollowing the vessel so that there is a good friction fit on the lid. Once the vessel is hollowed the lid is fitted so the two outside edges can be trued up to each other before final finishing coat. Finally, I turn a finial out of White Oak to cap the piece. This project, although my first, turned out really well and was a great learning experience. I intend to give this to my wife to use as a Jewellery box. If you liked this video please hit the thumbs up button and leave your thoughts in the comments below. Subscribe so you don't miss out on future projects and share with your friends. Thank you!

 

Ring vase by Al Furtado
By: Rebel Turner
July 20, 2017 · 3,615 views

I needed some inspiration for something to turn so I looked for something a very basic log could offer me. A ring vase seemed to have been the perfect answer.

 

Wood Turning - Vessel Turning short demo
By: Jason Van Duyn
July 19, 2017 · 164 views

Van Duyn Woodwork, Raleigh NC - 919.760.0327 - This is a channel dedicated to my contemporary wood sculpture for sale, as well as my superior quality cremation urns for sale. I am also establishing this channel as a visual resource for my products as well as an informational on wood turning process and tips.

 

Large Cedar Vase # 89
By: The Wood Whirler
July 16, 2017 · 2,597 views

Wife wanted a taller vase, so I made her one.

 

183 Woodturning a 0.10 Cedar log into an 80 vase
By: Roger Webb
July 01, 2017 · 18,697 views

Roger Clyde Webb demonstrates Woodturning with a Pacific Tooling wood lathe We ship worldwide: Email me at : info@pacifictooling.com I will send you information on our new * Lathe * and 4040, 6060, 6090 and 6012 (linear rail model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225 . Pacific Tooling; Australian Inventor Roger Clyde Webb ;-) Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

At Last My Rose (Root) Blossoms
By: As Wood Turns
June 30, 2017 · 2,651 views

http://www.AsWoodTurns.com As my regular viewers can attest, I've made several attempts to turn the root of rose bushes with varying degrees of success and varying degrees of difficulty. In this video, I've pressed forward with a new, freshly dug rose root section. Well, I still had some difficulty with this instance. The root did not yield the diameter of wood that I anticipated once I turned it down to remove most of the bark and bark inclusions. I also had unfortunate results with mounting green wood to a waste block even with using a tenon. That aside, this is my best vase yet from the root of a rose. Persistence is paying off. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

 

Inside Out Turning (Vase?)
By: Peaceful Woodturner
June 25, 2017 · 1,193 views

This is my first complete inside out turning attempt. I used some reclaimed stud lumber to make this. I think may be it will be a lamp. Music: Violins and Tea by Lock Lomond

 

Ash hollow form with Yew emerging stand - Part 2
By: Turning Works
June 25, 2017 · 644 views

Final part of a two part series. The stand is emerging from a Yew branch, the hollow form is made from Ash. I apologise for the lost footage, I will be doing another similar project in the future and will concentrate more on that aspect in the video. Thanks for watching! Take care, Dave As always.... Hampshire sheen; http://www.hampshiresheen.com Yorkshire Grit; http://yorkshire-grit.com

 

World's biggest wooden vase you've ever seen
By: Woodworking Enthusiasts
June 24, 2017 · 1,689 views

Contacts: Kentucky Fried Heartwood Somerset, Kentucky (606) 423-2378 E-Mail: alykatt@live.com Thanks for watching..Don't Forget to like, comment, share and subscribe! All things you need for learning Joinery: https://goo.gl/ssQw4R Subscribe to my channel: https://goo.gl/QSNyZs ----------------------------------------- ----------------------------------------- We do NOT own all the materials as well as footages used in this video. Please contact reaction129149@gmail.com for copyright matters!

 

Wood turning Oddest piece Vase.by Al Furtado
By: Rebel Turner
June 23, 2017 · 80,995 views

Oddest piece vase Bottle Brush wood. a hard piece to mount but the end results and being able to keep it together considering what I had to work with made it all worthwhile https://www.facebook.com/TheRebelTurner https://twitter.com/AlbertFurtado57 alfurtado@verizon.net

 

Oak vase fail fun
By: Rons Woodturning shop
June 23, 2017 · 56 views

I was really looking forward to completing this vase but it just didn't work out. I trimmed too much and ruined the look I thought I would get. Plus a catch broke the tenon. Still had fun for awhile though!

 

Ash hollow form with emerging Yew stand - part 1
By: Turning Works
June 23, 2017 · 685 views

Part one of a two part series. This is an evolution from a previous project. I believe this to be unique as I have not seen any other piece which is similar (please let me know if you see something!). The stand is emerging from a Yew branch, the hollow form is made from Ash. I loved making this! Don't forget to watch part two! Thanks for watching! Take care, Dave Stewart Furini; https://www.youtube.com/user/stewartfurini Hampshire sheen; http://www.hampshiresheen.com Yorkshire Grit; http://yorkshire-grit.com

 

Twin Vases
By: Turntastic Wood Designs
June 20, 2017 · 202 views

Twin vases with a wide opening. I held them onto the lathe using waste blocks made here https://www.youtube.com/watch?v CMpJR4WzHtw

 

Раз, два и ваза! (One, two, and vase!)
By: Аleksey Bek
June 19, 2017 · 366 views

Все этапы создания вазы. Сначала склеили, потом выточили. All the steps of creating a vase. First glued, then machined.

 

Part 2 IronWood Burl
By: SG Art Turning
June 18, 2017 · 10,911 views

Patreon : https://www.patreon.com/sgartturning Email : simgadoury@gmail.com You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

178 Woodturning a 60 Blackwood vase from a log
By: Roger Webb
June 16, 2017 · 264,384 views

Roger Clyde Webb demonstrates wood-turning on a Pacific Tooling RME1218VD wood lathe. info@pacifictooling.com We ship worldwide: Email me at : info@pacifictooling.com I will send you information on our new * Lathe * and 4040, 6060, 6090 and 6012 (linear rail model) CNC routers and CNC lasers 6040, 6090, 1390 and 1225 . Pacific Tooling; Australian Inventor Roger Clyde Webb ;-) Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

Oak Vase With Twisted Walnut Strips / Woodturning Project Ideas
By: Carl Jacobson
June 10, 2017 · 20,302 views

I turned the two Oak pieces on the lathe, and made a small grove in each one for the strips of Walnut. I soaked the Walnut strips over night in water to make them flexible enough to twist. Check out Sebastian video https://www.youtube.com/watch?v vlLuT_Fje8E Tools used in the video-- Lathe: http://www.turnrobust.com/ Band saw: http://astore.amazon.com/wood01-20/detail/B00006ANS4 Table saw: http://astore.amazon.com/wood01-20/detail/B005HPWE5W Turning tools: http://www.easywoodtools.com/ Turning tools: http://thompsonlathetools.com/ Howard wax: http://astore.amazon.com/thewood0c-20/detail/B0

 

A dyed maple vase and pesky peas!
By: yak branson
May 29, 2017 · 145 views

Maple vase dyed with food color

 

Wood Turning - Beaded Hollow Form Textured with Acrylic Paint
By: Mike Waldt
May 27, 2017 · 6,401 views

I bead and texture an Ash Hollow Form. Inspired by Pat Carroll. UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

woodturning # 71 cherry hollow form
By: Woodslee Summercraft
May 25, 2017 · 3,630 views

My participation, in Grit and Sheen's facebook hollow form contest, just to participate, not enter. This cherry hollow form, textured, burnt lines, 1 3/4' opening and finished with Yorkshire grit and Hampshire sheen Canada. music by Josh Woodward - I'm not dreaming Josh Woodward - River went dry https://creativecommons.org/licenses/ please visit my website http://www.woodsleesummercraft.ca

 

Woodturning-Colored Pencil & Epoxy Spiral Vase
By: Andy Phillip
May 21, 2017 · 10,507 views

Turning a colored pencil spiral vase with epoxy resin

 

'Applefire' vase - Apple wood and Resin
By: TGL Woodturning
May 19, 2017 · 5,811 views

A small vase with flame like highlights from resin. This timber was sourced from a local orchard and would have ended up in a smoker or bonfire! Please support me in making more videos and cool woodturning projects. Like and subscribe, and check out my Patreon page! Please visit my Patreon page: https://www.patreon.com/TGL and follow me on Facebook https://www.facebook.com/TGLWoodturning/ Music: 'Firebrand' & 'Firesong' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

woodturning #70 cedar hollow form fail
By: Woodslee Summercraft
May 17, 2017 · 4,610 views

In this my latest offering i have this fail for you where i plan to turn a hollow form for the grit and sheen competition. Turns out to be a Cedar twig pot with a french polish finish, I hope you enjoy

 

PeteWade2017
By: Northcoast Woodturners
May 17, 2017 · 250 views

Pete Wade demonstrates creating a square hollow form to the North Coast Woodturners.

 

Woodturning - Pecan Hollow Form
By: Jason Lowrie
May 16, 2017 · 1,049 views

I turned a small hollow form from a piece of pecan using Trent Bosch hollowing tools. www.Trentbosch.com Thank you for watching. Please Subscribe, Like and Share Italian Afternoon by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://www.twinmusicom.org/ Italian Morning by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://www.twinmusicom.org

 

Woodturning: Get over your fails!
By: Turning Works
May 16, 2017 · 376 views

I knew this project would be a challenging one, but I had no idea I would fail multiple times while turning this bowl! Hopefully this video will show you how to adapt your design when it doesn't go quite to plan! Thanks for watching!

 

Walnut beaded vase
By: Rich McNatt
May 14, 2017 · 331 views

 

My Rose Root Blossoms Into A Unique Vase
By: As Wood Turns
May 13, 2017 · 2,613 views

http://www.AsWoodTurns.com I dug up an old rose bush from my yard. (Please do not report me to the Rose Club). The root is large enough for at least a couple of turnings. But exactly what should I turn with this unusual wood. I consulted with another woodturner and finally decided on a first project. This vase is about 3' tall and 3' in diameter. It is finished with walnut oil. I tried to preserve some of the bottom roots and voids between roots. I carved out the bark inclusions and did a lot of hand sanding. It is a conversation piece. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

 

THE ZIP VASE !
By: Nick Zammeti NZ WoodTurning
May 05, 2017 · 108,669 views

DAVID LOWE https://www.facebook.com/Woodcraft-by-David-Lowe-RPT-139144072869090/ MUSIC BY (Future Funk) http://smarturl.it/JoakimKarud-Longing MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw MY NZ WOODTURNING EMBLEMS (round brass logo makers mark) http://www.williams-eng.co.uk/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http:

 

Woodturning - Maple Vase and Camera Boom Walkthrough
By: Josh Bayer
May 05, 2017 · 733 views

Welcome back to another video from The Sawdust Factory. Tonight we are going to use the new camera boom to film the turning of a Maple vase. Hope you guys enjoy the video. Check out my channel for other wood turning videos.

 

Panels Coloured Ash Burr
By: Olivers Woodturning
May 04, 2017 · 170 views

Coloured Ash burr with exposed wood panels

 

Hollow Form with Jimmy Clewes
By: jimmy clewes
April 30, 2017 · 2,212 views

Turning and Embellishing a Hollow Form with Jimmy Clewes

 

Wood turning Found a Eucalyptus root ball by Al Furtado
By: Rebel Turner
April 30, 2017 · 200,509 views

Found a Eucalyptus root ball here is what I was able to get out of it. Lid is mango fineal is Natural edge Eucalyptus root.

 

Walnut Vase - A woodturning Inspired by the Rebel Turner
By: Josh Bayer
April 29, 2017 · 1,700 views

Today at the Sawdust Factory we are turning a vase from a piece of Walnut firewood. This was inspired by Al Furtado. If you haven’t seen his channel be sure to venture over and check out his great woodturnings. He does a fantastic job at hollowing vases. I had to give it a shot in my own shop. Hope you enjoy the video, check out my channel for other wood turning videos. Thanks, JB @ The Sawdust Factory

 

Wood turning Droop over vessel by Al Furtado
By: Rebel Turner
April 29, 2017 · 3,941 views

Wood turning Droop over vessel. Having fun can be time consuming. I made a little droop over vessel with lid out of what I believe to be Sweet Gum . This turning is for the advanced and cautious turner. Have fun be safe https://www.facebook.com/yournamegoeshere2 https://twitter.com/AlbertFurtado57

 

Wood turning large Vase by Al Furtado
By: Rebel Turner
April 22, 2017 · 21,764 views

With this turning I have learned that turning a piece this big is intimidating and I give much more credit to those that turn huge pieces. This piece was hollowed out with every tool I had in my arsenal including the new hollowing articulating arm. Modifications were done to the arm to accommodate me. Follow me on https://twitter.com/AlbertFurtado57 Like on https://www.facebook.com/yournamegoeshere2

 

Segmented Vase
By: Niantic River Woodcrafting with Chris Neilan
April 22, 2017 · 429 views

From Waterford, Connecticut, along the Niantic River! In this video I make a segmented vase of Maple, Walnut and Purpleheart. It has 21 rings and 481 segments. Stil working out camera angles in my small shop. Thanks for watching and please subscribe! Thanks, Chris cneilanbanjo@yahoo.com

 

Woodturning at 54a. #115 A Yew and Walnut vessel
By: Keith Barrow
April 18, 2017 · 2,371 views

A vessel,hollow form? from Yew with a Walnut finial. For Seggys,please contact me through my website: www.spanglefish.co.uk/woodturningat54a For information on UKIWS: www.UKIWS.co.uk For Yorkshire Grit: www.yorkshire-grit.com For Hampshire Sheen products: www.hampshiresheen.com

 

Spalted Pecan Hollow Form
By: Austringer Creations
April 18, 2017 · 203 views

I finally decided to tackle a bowl after turning pens for a few months. I pulled a couple pecan logs from the wood pile and was happily surprised to find them beautifully spalted when I cut them open.

 

Square bottom Burl vase by Al Furtado
By: Rebel Turner
April 11, 2017 · 14,435 views

I had a crotch from one of the pieces of firewood and cut it very diliberate to capture what it had to offer, Much cross grain going in different dirrections made this piece I think. Hope you like it

 

woodturning - coloured pencil vase
By: Andy Phillip
April 10, 2017 · 92,575 views

turning a vase with coloured pencils and epoxy.. The Sun is Scheduled to Come Out Tomorrow by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/honor/ Artist: http://chriszabriskie.com

 

Square top wingged vase by Al Furtado
By: Rebel Turner
April 09, 2017 · 7,629 views

The square vase collection from fire wood split logs. I have picked up some pieces of firewood and figured out what I thought would be the best cut to be presented on a vase, this was the first of a few let me know if another of these vase videos is worth your time. Thanks

 

Ξυλότορνος - κατασκευή κούφιας μορφής / Woodturning - a tiny hollow form !
By: Kostas Annikas Deftereos
April 09, 2017 · 3,419 views

Σε αυτό το βίντεο ξεκίνησα να φτιάξω μια κούφια μορφή άλλα εξελίχθηκε σε κάτι άλλο !! Ετσι είναι ο ξυλότορνος πάντα ξεκινάς να φτιάξεις κάτι και ποτέ δεν ξέρεις που θα καταλήξεις !!! Ελπίζω να σας άρεσε !! Περιμένω τα σχόλια σας !!! Aν θέλετε μπορείτε να με βρείτε και στις παρακάτω σελίδες ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos Η μουσική είναι μια πρόσφορα από τους way light creations μπορείτε να μπείτε στο site τους και να κατεβάσετε δωρεάν μουσική : http://waylightcreations.com η να δείτε τις όμορφες κατασκευές τους στο youtube : https://www.youtube.com/channel/UC38CQXaEkI4k_sQCIZOJJ0Q

 

Athosian Vase x3
By: Mike-N-Texas Woodturning
April 08, 2017 · 3,338 views

Mike turns 3 Athosian style Lidded Urns The original Athosian vase was created in the city of Athos in the Pegasus Galaxy, just Google it if you want to know more.

 

How To Make A Segmented Scrap Wood Vase
By: SE Woodwork
April 05, 2017 · 1,715 views

In this video I decided to use my left over scraps from making some inlay edge banding, to create a segmented vase. Upcoming videos; more Segmented Vases, Live Edge Bowl Turning, Inlay Edge Banding and much more! If you'd like to support me, please check out my Patreon page; https://www.patreon.com/sewoodwork I would really appreciate it if you where to subscribe and and share this video with your friends! If you have any ideas of things you would like to see me make, please comment them below and I will try and do it! Where to find me; Instagram: se_woodwork Tools used; Charnwood B250 1

 

Episode 4 Hollowing of the Vessel, Theory and Practice
By: Daniel Vilarino
April 02, 2017 · 1,287 views

Hola/Hi! Este video está en Inglés, para verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/rDsqjWpFnqo ***This video is in English.*** Esta es la culminación de la serie de 4 videos que se inició con el balanceo de la pieza, siguió con su desbastado, luego con el montaje y formateo externo y en este último episodio realizamos el vaciado usando la herramienta de vaciado de Lyle Jamieson. ***This is the culmination of the series of 4 video that started with the balance point, continued with the quick roughing, then we mounted the piece and gave it its external s

 

Episodio 4: Vaciado de Forma Hueca, Teoria y Practica
By: Daniel Vilarino
April 02, 2017 · 8,375 views

Hola/Hi! ***This video is in Spanish, to watch it in English, please click in the following link:*** https://youtu.be/uBzV7Qjhdq8 Este video está en Español Esta es la culminación de la serie de 4 videos que se inició con el balanceo de la pieza, siguió con su desbastado, luego con el montaje y formateo externo y en este último episodio realizamos el vaciado usando la herramienta de vaciado de Lyle Jamieson. ***This is the culmination of the series of 4 video that started with the balance point, continued with the quick roughing, then we mounted the piece and gave it its external shape and i

 

Pencil vase
By: Brad c
April 02, 2017 · 23 views

First attempt at turning with epoxy resin.

 

woodturning-Pencil Vase Blank
By: Andy Phillip
April 01, 2017 · 1,142 views

how i form a pencil vase blank using coloured epoxy ( at least i think its going to be a vase you never know!!)

 

Vase drechseln aus Birne Wood Turning a Vase from a Pear Tree Projekt 30
By: Andreas Achleitner
April 01, 2017 · 739 views

Salve! Heute war ich zu Gast beim Daniel. Wir haben eine kleine Vase aus Birne gemacht. In meinen Videos verwende ich folgende Werkzeuge: Fugzwingen http://amzn.to/2BNy3E1 Ponal Holzleim http://amzn.to/2BAprUE Schleifpapier http://amzn.to/2ByYl09 Druckluftschleifer http://amzn.to/2DgSXj4 Bosch PTS 10 Kreissäge http://amzn.to/2pa8Tgh Holzmann VD 1100 Drechselbank http://amzn.to/2BQDAtH Drechselmesser Set http://amzn.to/2DljLxz Scheppach Hobelmaschine http://amzn.to/2BVAgA1 Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Die Themenbereiche umfassen von d

 

woodturning - A captive Ring on a natural edge silver birch vase
By: Andy Phillip
March 29, 2017 · 516 views

turning a captive ring on a natural edge silver birch vase

 

Wood turning Vase on fire by Al Furtado
By: Rebel Turner
March 26, 2017 · 22,442 views

A turned vase with the help of my friends 3/16' thin 9' tall Torched the top to add a bit of flair to a very blend wood https://www.facebook.com/yournamegoeshere2 https://twitter.com/AlbertFurtado57

 

Lime Hollow Form
By: Olivers Woodturning
March 24, 2017 · 206 views

Burnt textured and pierced Lime hollow form 90mm x 130mm

 

External Shape of the Hollow Form
By: Daniel Vilarino
March 22, 2017 · 1,205 views

Hola/Hi! Este video está en Inglés, si deseas verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/Ff3mc8UJNdo ***This video is in English.*** Este es el tercer episodio de la serie: Forma Hueca. En el primer episodio mostré como balancear una pieza de madera entre puntas para lograr el punto de equilibrio y así poder subir las revoluciones del torno para facilitar el torneado preliminar. En el segundo episodio mostré cómo realizar dicho pretorneado, mostrando cortes de empuje para dar cuenta rápidamente del mismo y lograr un cilindro. En este episodio, vamos a v

 

Anniversary Vase - Episode 66
By: Paul Lockwood
March 22, 2017 · 397 views

Today 22 March 2017 is my 20th Wedding Anniversary. Every year I buy my wife some flowers, that is until this year where I decided to make them. Now in this second video I made a vase to go with them. Sticking with the same theme the main elements of the vase are all Oak with a couple of Spalted Beech bands. Finished with two coats of Danish Oil. Music Knock, Perfect and Bloom By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Wood turning square turned Vase by Al Furtado
By: Rebel Turner
March 22, 2017 · 9,042 views

I had fun with this turning and the steady rest proved itself a worthy addition to the shop

 

#184 White Oak Vessel for Leann
By: Miguel Sanchez
March 20, 2017 · 3,422 views

Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Miguel Sanchez 2: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

Woodturning a Spalted Magnolia hollow form
By: Boston Woodturning
March 20, 2017 · 537 views

Woodturning a Spalted Magnolia hollow form and hollowing with a camera and monitor. Time lapse!

 

Gum Ball Vase # 73
By: The Wood Whirler
March 18, 2017 · 2,804 views

I build a multi step gum ball vase.

 

Wood turning - making bud vase out of Iroko (also testing captive ring)
By: CraftWithAfshin
March 10, 2017 · 416 views

hey guys today I've turned a vase out lovely piece of Iroko, I did turn a captive ring on it but in my opinion it didn't look good so I broke it off if you have any suggestion where I should try it let me know in comments below, thank you all for watching! Music: http://www.bensound.com/royalty-free-music/track/relaxing

 

Wood Turning a Short, Wide Mouth Mountain Ash (Rowan) Vase
By: Jerry Paul
March 09, 2017 · 4,690 views

I had a chunk of mountain ash laying around that was quite dry and decided to chuck it up and see what I could make of it... This was the result.

 

Episode 1 Series Hollow Form, Balance Point
By: Daniel Vilarino
March 07, 2017 · 1,721 views

Hola/Hi! Este video está en Inglés, para verlo en Español por favor haz un click en el siguiente enlace: https://youtu.be/pwX7b75oUJI ***This video is in English*** En este video comienzo una serie en la cual voy a ir mostrando varias técnicas que nos llevarán a la realización de una forma hueca. La primera es encontrar el punto de balance entre puntas para poder levantar la velocidad del torno y facilitar el cilindrado de una pieza irregular. ***In this video I begin a series in which I will be showing several techniques that will takes us to the making of a hollow form. The first is to fin

 

woodturning vase.Ξύλινο βάζο.
By: Μάκης Καλτσίδης
March 05, 2017 · 973 views

Plywood vase in woodtathe.Ξύλινο βάζο από κόντρα πλακέ.

 

Spalted Beech Bud Vase - Episode 61
By: Paul Lockwood
March 04, 2017 · 426 views

A birthday gift for my mum, this is an appropiate present for her. This was one of the first pieces of spalted beech I bought and turned well with not too much tear out. Being quite soft wood and a fairly simple shape it was also a quick turning, hence why a short video. The shape was inspired by watching Steve Twydell of Temple Boy turnings when he did one very similar on one of his Sunday night live shows. Go check out his channel and subscribe, always lots of interesting turnings to give you plently of ideas. https://www.youtube.com/channel/UCM0Ui4ri5LLJvopaMT-SR5w Sanded to 240 grit, two

 

Woodturning Crack Spalted Vase
By: SG Art Turning
March 02, 2017 · 34,028 views

Patreon : https://www.patreon.com/sgartturning You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Email : simgadoury@gmail.com Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

Woodturning Bradford Pear Hollow Form
By: Boston Woodturning
March 01, 2017 · 391 views

Woodturning Bradford Pear Hollow Form time lapse.

 

#80 Woodturning Project: Hollowing and Colouring a Sycamore Vase
By: M. Saban Smith Woodturning
February 28, 2017 · 15,129 views

In this week's woodturning project video, I look at hollowing, which is something I've been itching to play with on video for a while. So, using the Simon Hope Easy Arm Hollowing Jig, I turn a simple vase form from sycamore. The wood has some fabulous rippling in it which took my new Intrinsic Colour Dyes beautifully. I needed various techniques to turn this - hollowing, spindle, turning, and parting off....not to mention a bit of artistic flair with the colouring. Here are some useful links: Intrinsic Colours: https://goo.gl/Gu65IE Mike's Jig Video: https://goo.gl/CFO9Xt Simon Hope Easy A

 

Woodturners Journal: Cherry and Acrylic Hollow Form Part II
By: Woodturners Journal
February 27, 2017 · 4,591 views

Facebook Group: https://www.facebook.com/groups/1437251519906713/ Jerrod finishes turning a hollow form vase made from Cherry Wood and Dyed Acrylic

 

#128 Woodturning a Live Flower Vase Part 2
By: Stephen Ogle
February 27, 2017 · 8,658 views

Part 2 of my Live Flower vase covers shaping the rim, surface preparation for finish, finishing with Lacquer and waterproofing the vase for Live Flowers. Over all I spent almost a week on this project. Part 1: https://www.youtube.com/watch?v HnTDUHkfKM4

 

Woodturners Journal: Cherry and Acrylic Hollow Form Part I
By: Woodturners Journal
February 26, 2017 · 2,796 views

Jerrod wood turns a hollow form made out of Cherry Wood and Purple Dyed Acrylic. Facebook Group: https://www.facebook.com/groups/1437251519906713

 

Ξυλοτορνος κατασκευη βαζου απο ριζα ελιας / Woodturning an olive root vase
By: Kostas Annikas Deftereos
February 25, 2017 · 4,785 views

Αυτη την φορα ημουν πολυ τυχερος ! εβαλα στον τορνο ενα κομματι που πιστευα οτι ηταν απο κορμο ελιας και ηταν απο ριζα ! το αποτελεσμα ηταν υπεροχο !!! ελπιζω να σας αρεσε και εσας ! μαζι θα τα ξαναπουμε την επομενη κυριακη !!! Μπορείτε να με βρείτε επίσης στις παρακάτω σελίδες facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos

 

Let's Make a Vase
By: Joanne Sauvageau
February 23, 2017 · 364 views

Created with Wondershare Filmora by Joanne Sauvageau

 

Просто ваза (Just vase)
By: Аleksey Bek
February 22, 2017 · 1,210 views

В этом видео я устраняю брак который допустил ранее. После ремонта ваза выглядит вполне прилично. In this video, I eliminate the marriage which made earlier. After the repair, the vase looks pretty well.

 

#127 Woodturning a Live Flower Vase Part 1
By: Stephen Ogle
February 22, 2017 · 15,234 views

This is a larger vase and is the first I have made for holding live flowers. Lining the inside of the vase with a food safe epoxy making it completely waterproof. Part 2: https://www.youtube.com/watch?v G-TRJvble6c

 

woodturning # 65 osage orange blues vase.
By: Woodslee Summercraft
February 19, 2017 · 4,983 views

In this video I turn a vase from osage orange wood from a friends tree, I use blue dye on the inside, finish the outside with a combination of Yorkshire grit and Hampshire sheen, and bar top high gloss resin on the inside, with a scorched rim. music from http://freemusicarchive.org/ Josh Woodward - Once Tomorrow Josh Woodward - Les Baigneurs https://creativecommons.org/licenses/ please visit my website http://www.woodsleesummercraft.ca

 

Turning A Vase - Woodturning
By: David K
February 19, 2017 · 610 views

This is one of my first attempts at hollowing. Result is this spalted beech vase. For the finish i used a few layers of clear lacquer and finally buffed it out on a buffing wheel. Please enjoy, and a comment would be very appreciated! https://www.facebook.com/davidkholz/ If you want to see more, click here: https://www.youtube.com/davidkholz?sub_confirmation 1 Um meinen Kanal zu abonnieren, klicke bitte hier: https://www.youtube.com/davidkholz?sub_confirmation 1 _________________________________________________________ Music That Kid in Fourth Grade Who Really Liked the Denver Broncos von Chris Zabriskie ist unter der Lizenz Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) lizenziert.

 

Woodturning - Plywood Vase
By: Jason Lowrie
February 17, 2017 · 7,649 views

Having never turned plywood before, this was an experiment to see what I could make with a few pieces of birch plywood. Overall I like the horizontal grain or layers, but the turning process is not near as gratifying as turning a solid piece of wood. This may be my gateway drug into segmented turning. Only time will tell. Thanks for watching. It is always encouraging to see subscription and view counts grow, so please Subscribe, LIKE, and SHARE. Thank you , Jason,

 

Emergence of a highly figured beautiful Mesquite vase from a root ball
By: phillywoodinSA
February 16, 2017 · 56 views

Here is a project made from a Mesquite root ball. You will watch the emergence of a vase from a broken piece of the root due to digging process. Note the beautiful color contrast of the Heart and soft woods. I had to repair some of the voids in this piece due to their unstable condition for turning. The end result? I will leave that up to your judgment.

 

Wood Turning - Ash Hollow Form Fail & Make It Matter Auction
By: Mike Waldt
February 16, 2017 · 5,378 views

Make It Matter Auction page - www.makersmakeitmatter.com - Copy and Paste into your browser Facebook Make It Matter: https://www.facebook.com/makersmakeitmatter/ UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Бывают огорчения (No luck)
By: Аleksey Bek
February 15, 2017 · 3,866 views

В конце работы треснула заготовка. Причина одна, надо делать люнет. Длинные детали без него не сделаешь. Проклеим по новой и доделаем до конца. At the end of the cracked piece. The reason to do the holder. Long parts without it will not. The work will be done.

 

Wood turning Changes in a Vase by Al Furtado
By: Rebel Turner
February 11, 2017 · 2,166 views

This video is a follow up from my last video What would you do. Thank you everyone one for such a warm support on my video. https://www.youtube.com/watch?v E4OVeRcUQTM In this video I go through most of the changes that were recommended and show the results as well as come p with a final design. I think it's an interesting video and a must see how much a vase can change with a few modifications. With one is your favorite? I believe this to be a first. I also want to apologize as this had been accidentally deleted from YouTube and I lost all the great responses that had been posted o this video. Thanks for understanding ad if you would like to re-post your original comment. Thank you.

 

Wood Turning - Ash Hollow Form - Part 1
By: Mike Waldt
February 11, 2017 · 11,134 views

I partially turn an Ash Hollow form, the video is in two parts because I had a dilemma about how to finish the piece, all is explained in the video :) I used the Hope Easy Arm Jig, to hollow out. Facebook Make It Matter: https://www.facebook.com/makersmakeitmatter/ UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Vasetto per Romualdo - Vase for Romualdo
By: Mauro il tornitore
February 10, 2017 · 450 views

A little vase of cypress for my friend Romualdo. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un vasetto di cipresso per il mio amico Romualdo. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

FLAMING BOX ELDER MAPLE HOLLOW FORM : Making of
By: Michael Zurcher
February 03, 2017 · 3,549 views

Woodturning, Making, Creating: In this episode I show you how I make a small hollow form from a piece of flaming Box Elder Maple. It was a really fun little project, and I hope to make a bunch more of these. Please feel free to comment, like, share, & I'd love to have you as a subscriber if you aren't already! :) Sticker swap? Send your sticker to the address listed below & I will send you one back. Thanks! :) Michael Zurcher 313 Gordon Drive Exton, PA 19341 Check out my Instagram here: https://www.instagram.com/michael_zurcher/ If you think someone else might like these videos or my channel please share them :) Don't forget to subscribe to keep informed on my future videos. Thanks for watching!

 

[黑羊工作室 Atelier Y] 木工車床 修邊機 小木盒
By: Young C.P.S.
January 29, 2017 · 1,261 views

利用木工車床及修邊機來製作小木盒(2017-01) 這個小盒子將參加2017年美國車床協會 Women in Turning 舉辦的徵件活動,主題為 “Open and Shut” 尺寸: 10cm x 6cm x6cm

 

Gedrechselte Vase mit Buntstiften verziert woodturned Vase with crayon colored
By: Woodturning F-Z
January 26, 2017 · 2,180 views

Gedrechselte Vase aus Fichtenholz gebrannt und mit Buntstiften verziert Woodturned Vase from Spruce wood burned and colored

 

fluted vase pt 2
By: BowersCraft Woodturning
January 25, 2017 · 64 views

Finishing & Pyrography of a Fluted Maple vase Please Subscribe,Like,Comment & Share But most of all Enjoy Thank you for Watching

 

Wood turning What would you do by Al Furtado
By: Rebel Turner
January 25, 2017 · 4,393 views

See what you would do to this vase. I turned a cherry vase and at the end I just couldn't pin point what it was that I didn't like about it. I know it could have been many shapes but what would you do to fix it? Or do you think it's fine?

 

Wood turning - Lets make a Vase from Australian Banksia pod
By: CraftWithAfshin
January 24, 2017 · 2,258 views

Hey guys today im going to make a small vase out of Banksia nut it my first time turning it and it was fun, I hope you guys like it. Music: Dark Times by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100747 Artist: http://incompetech.com/ Time Passing By by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ At Rest - Romance by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100748 Artist: http://incompetech.com

 

Fluted Vase Pt 1 2
By: BowersCraft Woodturning
January 23, 2017 · 99 views

This is a Fluted Vase made from Maple & Finished in paste wax & Carnuba Wax Please Like,Share & Comment Thank you for Watching

 

Gedrechselte Vase aus Wildkirsche ,woodturned a Vase from wild Cherrywood
By: Woodturning F-Z
January 23, 2017 · 8,713 views

Durchbrochene Vase aus Kirschholz gedrechselt für die Schlitze wurde eine Woodcarver Scheibe der Firma Kaindl verwendet

 

Emergence of a Walnut/maple segmented vessel
By: phillywoodinSA
January 20, 2017 · 42 views

Here I show you how I learned to improvise a failed project to something adored by many of my friends. Most turners walk away from such project when encountering cracks like this one. As a matter of facts they discouraged me from continuing this project. I leave the rest to your judgment.

 

Sycamore Vase
By: BowersCraft Woodturning
January 15, 2017 · 92 views

A Sycamore Hollow form finished in Carnuba Wax Links to my favorite Channels & to my FB Page https://www.youtube.com/user/TheCymruBoy https://www.youtube.com/user/workingimage https://www.youtube.com/user/haydenHD https://www.youtube.com/user/2011summerman https://www.facebook.com/BowersCraft/ Music supplied by http://www.bensound.com/royalty-free-music

 

163 Wood-turning a 100 oak vase from a 0.10 log
By: Roger Webb
January 14, 2017 · 5,354,845 views

Wood-turning an oak vase by Australian Inventor Roger Clyde Webb;-) Thank you for watching! Hi, Maria and I are back with an expanded product line. Wood Lathes, CNC routers, 4040, 6060, 6090, 6012, 1212, 1224, 1325 and now CNC 6040, 6090 , 1390 and 1325 Lasers (linear rail model) and machine tool accessories . Australian Inventor Roger Clyde Webb Pacific Tooling Email : info@pacifictooling.com Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

Woodturning - Rough Turn Hollow Form
By: Jason Lowrie
January 13, 2017 · 860 views

I picked up a few pieces of a magnolia tree that was taken down in Plano, Texas. This is a quick video of the roughing out process. I used the Trent Bosch Stabilizer arm to assist in the hollowing process. The laser attachment on the arm is a homemade job. It works, but needs a great deal of refinement. Hope you enjoy. Please Like and Subscribe Minor With Cricket by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Wood Turning - A Catalpa Vase/Hollow Form and a Shout Out
By: Mike Waldt
January 12, 2017 · 17,932 views

I turn a Vase/Hollow from a log of Catalpa, that was very kindly given to me by Paul Wise, at UKIWS last June. Thanks again Paul. Turning Works - https://www.youtube.com/channel/UCHoefXGGzyZvtIsj0t_-9wg Facebook Make It Matter: https://www.facebook.com/makersmakeitmatter/ Woodchuckers: https://www.facebook.com/groups/harri.woodchuckers/ UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Woodturning Black Walnut Vase Try 2
By: SG Art Turning
January 12, 2017 · 3,905 views

Very Big Thank you For Supporting Me In My Channel !!!! My Web Site : https://sg-art-turning.com My Facebook : https://www.facebook.com/SGTurning/ My You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg

 

Turning poplar vase
By: Anatoly Tsiris
January 08, 2017 · 20,662 views

Anatoly Tsiris working on the large wood turning piece.

 

Wood turning- Beautiful Yew vase
By: CraftWithAfshin
January 07, 2017 · 867 views

Hey guys today I'm turning a vase out of Yew, yes Yew is mt favourite wood which is why i mainly turn that wood but its also much more expensive than some other woods.

 

Segmented Walnut Vase
By: Stuart Nelson
January 05, 2017 · 371,457 views

16' tall 11' wide 600 pieces Top ring is made of Box Elder. Maple veneer between walnut segments. Music by my friend, Blake. Check out his SoundCloud http://SoundCloud.com/lackspoetic Check out my Instagram https://www.instagram.com/sutartmelson

 

Woodturning Ebonising Black Walnut Vase
By: SG Art Turning
December 28, 2016 · 13,192 views

My Web Site : https://sg-art-turning.com My other video : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg

 

Xxl ash vase on the geiger woodturning
By: heyligenstaedt
December 26, 2016 · 3,525 views

 

Xxl ash vase on the geiger woodturning outside almost finished
By: heyligenstaedt
December 26, 2016 · 2,528 views

 

Wood turning - trying a out of ordinary vase design (Yew)
By: CraftWithAfshin
December 24, 2016 · 1,418 views

 

Woodturning a Segmented Vase - The African Vase
By: Fiaschetti Woodworking
December 10, 2016 · 45,869 views

This piece is available for purchase at http://www.fiaschettiwoodworking.com/ I was inspired to make this by the art from native African art and pottery. This vase is made out of Zebra-wood, Katalox, Maple, and African Mahogany. There is a total of 555 pieces in this vase. It took 43 hours to complete. If you have any questions please contact me at fiaschettiwoodworking@gmail.com

 

WOODTURNING A SMALL VASE WITH A GOLDEN INLAY!
By: Nick Zammeti NZ WoodTurning
December 09, 2016 · 3,351 views

I made a small vase here and used some left over golden resin from another project i did. The resin is mixed with gold dust. The Hampshire Sheen and wax Stick link is here. This is made by Martin Saban Smith http://www.hampshiresheen.com/ Music by https://soundcloud.com/phuturecollective/kuiters-mischief https://www.toneden.io/producerpacks/post/issue-six-lemongrass-free-download SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nzwoodturning/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

Wood turning - A beautiful Yew Vase
By: CraftWithAfshin
December 08, 2016 · 414 views

Hey guys ill be turning a vase today out of piece of Yew, Yew is my favorite type of wood hence why i turn it alot, if you have any question feel free to ask it in comments below, thank you!

 

Turning a Mallee Vase
By: SCCFORUM
December 04, 2016 · 113 views

Hi All, Turned a vase out of a piece of Browm Mallee. (More like a a thimble :-) ) This was my first try at a Ca finish. Not the greatest finish on this piece as it went cloudy white at the bottom. But it will get better in the future. CheersPaul

 

2WoodVase
By: Rick Hutcheson
December 03, 2016 · 415 views

 

Two Part Vase - (Frank Bowers)
By: Gwinnett Woodworkers
December 02, 2016 · 14,699 views

Frank creates a small open hollow form without the need of hollowing through the small opening. Recorded and presented in HD 07/14/2016 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Making a Red Elm Burl Hollow Form Take 2
By: mark's creative turnings
December 01, 2016 · 235 views

This video is about making a Hollow Form from a Red Elm Burl. I will be using the Rolly Munroe Hollower.

 

Spalted maple hollow form
By: Boston Woodturning
November 24, 2016 · 287 views

Spalted maple hollow form end grain cut

 

Wood turning- A beautiful Oak Burr Vase
By: CraftWithAfshin
November 19, 2016 · 382 views

Hey guys today im going to make a lovely Oak burr vase im trying a shape i seen made out of glass, i hope you enjoy it.

 

Ginkgo leaves vase Vaso con foglie di ginkgo
By: Mauro il tornitore
November 19, 2016 · 402 views

A vase with ginkgo leaves carved. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un vaso con foglie di ginkgo incise. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Woodturning A Segmented Vessel Inspired By Steve Lindsley. Part 3, Finish Turning
By: Colbe Pease Woodworking
November 18, 2016 · 9,344 views

In this video, I finish the segmented vessel that I started a few videos together. I cut out African animals to put in the port holes on the main feature ring.

 

Maple Vase
By: Peter Matthew
November 16, 2016 · 769 views

This week I rough turned this deep hollow form out of some of that maple I picked up recently! Check it out! For anybody interested here are the specs on my bowl gouge: 1/2' Henry Taylor Bowl Gouge: https://www.woodturnerscatalog.com/p/129/4636/Henry-Taylor-M2-HSS-Richard-Raffan-Signature-Superflute-Bowl-Gouge Ellsworth Sharpening Jig: https://www.woodturnerscatalog.com/p/94/1562/Ellsworth-Grinding-Jig 350 Grit CBN Wheel: http://woodturnerswonders.com/collections/radius-edge-cbn-wheels I have the bevel set to 60 degrees. I use a 45 degree set up jig on my wo

 

Big Spalted Hackberry Vase
By: Uncle Cys Woodshop
November 13, 2016 · 3,983 views

A friend gave me a whole bunch of Spalted Hackberry so I made him a gift from a big chunk. This is an amazing looking wood. Really hope you enjoy the video.

 

Stor Svarvad Vas Woodturning
By: Elias Klingvall
November 13, 2016 · 1,868 views

Stor vas gjord av furu med en topp och botten av ek Gammelagarns Ängmans Snickeri Gotland

 

Woodturning - Turning & decorating a Ceramic design vase
By: Peter Woodbine
November 12, 2016 · 5,940 views

Turning and decorating a 90 year old ceramic vase design. i saw this vase on an Antiques Show on TV and liked the shape of the vase and the timeless floral design.

 

Woodturning A Segmented Vase Inspired By Steve Lindsley. Part 2, Cutting And Assembling The Blank
By: Colbe Pease Woodworking
November 10, 2016 · 6,531 views

This is part 2, of a 3 part series. In this video, I cut and assemble all the ring I need to make the vessel.

 

WOOD TURNING - NATURAL EDGE VASE
By: TheThirdTwig
November 08, 2016 · 684 views

Large Natural edge vase from start to finish, THE THIRD TWIG (Like and Subscribe)

 

Woodturning A Segmented Vessel Inspired By Steve Lindsley. Part 1, Feature Rings
By: Colbe Pease Woodworking
November 04, 2016 · 24,614 views

In this video,I start making a segmented vessel. I was inspired by Steve Lindsley, a fellow Youtube woodworker. This will be a 3 part series.

 

Woodturning White Oak Vessel with Mandala Design
By: Boston Woodturning
November 02, 2016 · 1,634 views

Woodturning a huge White Oak Vessel with mandala design. Wood from Limerick Maine.

 

Wood turning Small Flower Vase (Laburnum)
By: CraftWithAfshin
October 31, 2016 · 165 views

Hey guys im going to make a small flower vase out of piece of Laburnum, if you ever came across Laburnum make sure to wear respirator while turning it it is poisonous, i wore mine the entire time.

 

Плоская Ваза
By: Аleksey Bek
October 31, 2016 · 1,659 views

Последний этап изготовления плоской вазы. Собираем и склеиваем все четыре детали и получаем готовую вазу. Весь процесс завершения работ.

 

FAILED PENCIL VASE! / NOW MOSAIC VASE!
By: Nick Zammeti NZ WoodTurning
October 28, 2016 · 32,073 views

Here I'm making a Pencil Vase woodturning project, however this didn't go to plan. SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nzwoodturning/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

Small Hollow Forms by Peg Schmid - Part 2 of 2
By: Gwinnett Woodworkers
October 24, 2016 · 2,966 views

Peg Schmid, a popular, local woodturner and demonstrator, demonstrates woodturning a small hollow form of Bradford Pear. She also textures and colors with metal paint while entertaining the group with her humorous, non stop commentary. She uses hand held hollowing tools and explains what she is doing and why she does it. She also turns an ebony collar. Peg Schmid has a background in fine arts, is a former gallery owner, a very experienced woodturner and is the current president of the Georgia Association of Woodturners. She also heads up the local “Women in Turning” initiative. Recorded and

 

Small Hollow Forms by Peg Schmid - Part 1 of 2
By: Gwinnett Woodworkers
October 24, 2016 · 3,172 views

Peg Schmid, a popular, local woodturner and demonstrator, demonstrates woodturning a small hollow form of Bradford Pear. She also textures and colors with metal paint while entertaining the group with her humorous, non stop commentary. She uses hand held hollowing tools and explains what she is doing and why she does it. She also turns an ebony collar. Peg Schmid has a background in fine arts, is a former gallery owner, a very experienced woodturner and is the current president of the Georgia Association of Woodturners. She also heads up the local “Women in Turning” initiative. Recorded and p

 

See through vase
By: Rich McNatt
October 21, 2016 · 474 views

Carl Jacobson did a vase a few weeks ago that inspired me to try. So try I did.

 

Hollow Form?????
By: Donny Lawson
October 18, 2016 · 428 views

Chinese Cherry that I was not sure what to make with it.

 

Segmented Chaos Vase
By: Kyle Toth
October 13, 2016 · 159,536 views

If you are interested in purchasing this vase check it out on my site.... http://woodbytoth.bigcartel.com This segmented vase is made of 30 different types of exotic and domestic wood. All of the rings are tapered. As you follow the rings around some will get larger and some will fade into fine points and disappear. It stands 7 inches tall and 5 inches wide. Subscribe to my channel https://www.youtube.com/channel/UCn_4... If you would like to support me and help me make more videos check out https://www.patreon.com/woodbytoth For inquiries and commissions contact woodbytoth@gmail.com

 

Woodturning Q&A Hollow Form Turning
By: The Woodshop
October 10, 2016 · 2,528 views

Hollow form turning Q&A I use a few different tools to hollow out these vessels. In this video I explain way I don't start and finish with one tool. Jack's FB Page, https://www.facebook.com/HandmadeWoodenCraft/ David K bowl video https://www.youtube.com/watch?v Y1W9xWHUHrU Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon

 

Woodturning Projects - Ironwood Hollow Form
By: Carl Jacobson
October 07, 2016 · 13,328 views

Hollow form turning can be very challenging. In this video I turned an Ironwood hollow form 4' tall and 5' in Diameter. The trick to hollow form turning is getting an even wall thickness. This is best done with calipers designed for woodturning. The piece I turned had two voids in the sides of the piece which makes this a little easier. Calipers: http://astore.amazon.com/thewood0c-20/detail/B01DWRNQFS My Q&A Channel-https://www.youtube.com/user/Thetuningshop Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Fri

 

Wood Turning - Saving the failed Yew Hollow Form
By: Mike Waldt
October 07, 2016 · 6,509 views

I attempt to save the Yew Hollow Form that I 'messed' up in my last video :) Yorkshire Grit - http://yorkshire-grit.com

 

Woodturning A Simple Redwood Vase
By: Colbe Pease Woodworking
October 07, 2016 · 529 views

In this video,I take an old Redwood 4x4, and turn it into a nice vase. I tried really hard to get a nice glass like finish on it.

 

Wood Turning - Yew Hollow Form - Almost!
By: Mike Waldt
October 01, 2016 · 6,801 views

I 'attempt' to turn a Yew Hollow Form. Simon Hope Hollowing: http://www.hopewoodturning.co.uk/ Yorkshire Grit: http://yorkshire-grit.com

 

Roberts Drechselbude - Vom Baum zur Vase
By: Robert S.
September 29, 2016 · 785 views

Diesmal eine Vase aus einem Stamm. Mal was Neues ausprobiert: Exzentrisch eingespannt und..... naja, seht selber. Mehr dazu auch unter Facebook: https://www.facebook.com/robertsdrechselbude

 

Wood Turning - Hollow form using the Hope Mini Hollowing Tools
By: Mike Waldt
September 25, 2016 · 10,196 views

I turn a Small Cherry Hollow Form, using the Hope Mini hollowing tool set, inspired by Sam Angelo - The Wyomingwoodturner.. WyomingWoodTurner: https://www.youtube.com/user/WYOMINGWOODTURNER Simon Hope: http://www.hopewoodturning.co.uk/ Yorkshire Grit: http://yorkshire-grit.com

 

Completing a Rough Turned Hollow Form ....with Sam Angelo
By: WYOMINGWOODTURNER
September 25, 2016 · 5,387 views

Sam finishes a hollow form that was previously 'rough turned.' He takes the viewer through the process: truing up the spigot, finishing the outside and the inside and finally reversing the vessel to finish the base. A very detailed video with many useful tips. My video on coloring this piece will be uploaded shortly.

 

Wood Turning A Small Segmented Vase
By: Colbe Pease Woodworking
September 21, 2016 · 1,440 views

In this video, i take some Oak and Walnut strips and make them into a small segmented vase.

 

Woodturning With The Naked Turner Follow Up On Ironwood Vase
By: Erik Anderson
September 19, 2016 · 1,625 views

Follow Up and Thank You For Ironwood Vase Video

 

Segmented Miniature Vase
By: Kyle Toth
September 15, 2016 · 60,493 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4... This is my 97th vase. It is made in Mahogany and Ebony. It stands 3 inches tall and 2 inches wide. This is part of my 100 vases and bowl series that I started back in 2007. This turning has 164 pieces of wood. This is my first miniature turning that I have done and I will be doing more! Subscribe to my channel https://www.youtube.com/channel/UCn_4... If you would like to support me and help me make more videos check out https://www.patreon.com/woodbytoth For inquiries and commissions contact woodbytoth@gmail.com To keep u

 

Flatland Woodturners Presents Kurt Rush Bandsaw Vase Demonstration
By: Flatland Woodturners
September 14, 2016 · 23,949 views

Kurt Rush demonstrates to our club how to make a vase with open sides using a lathe and a bandsaw. I do apologize about the shaky camera at points in this video. I didn't do my usual 3 camera setup as I knew Kurt was going to show cutting the vase on the band saw and I wanted to be able to hold the camera by hand to get those shots.

 

A Vessel on a Pedestal
By: Rich McNatt
September 11, 2016 · 541 views

 

Turning a Box Elder Hollow Form Part 1
By: Mike Peace Woodturning
September 09, 2016 · 3,954 views

I demonstrate woodturning the outside, mounting on a face plate, finish shaping and drilling a hollow form in Part 1 of this woodturning video. The blank is flaming box elder. The red color is caused by the trees reaction to stress. Click here for Part 2 where I hollow the inside I demonstrate hollowing out this form of flaming Box Elder in Part 2 of this woodturning video: https://youtu.be/kV_UNg5f-Gw You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Turning a Box Elder Hollow Form Part 2
By: Mike Peace Woodturning
September 09, 2016 · 3,273 views

I demonstrate hollowing a hollow form of flaming Box Elder in Part 2 of this woodturning video. Click here for Part 1 where I demonstrate turning the outside, mounting on a face plate, finish shaping and drilling a hollow form: https://youtu.be/yWGPRi1U6UM You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Natural edge black walnut vase
By: yak branson
September 09, 2016 · 79 views

Black walnut vase with a natural edge made from a small branch that had a crotch to give it the wings.

 

Woodturning With The Naked Turner Quick Look Little Hollowform Vase
By: Erik Anderson
September 04, 2016 · 3,900 views

small hollowform

 

#70 Woodturning Norfolk Island Pine Vase
By: Yuval Lahav Woodturning
September 03, 2016 · 11,400 views

I brought this piece of Norfolk Island Pine with me almost a year ago from far away Israel, and finally I took the time not only to turn it, but also use my Sorby Ultima Hollowing tool for the first time. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Josh Woodward - Release Wood Spider - Empty Home All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: TOMTURNS.COM,

 

Exploring My Family History By Turning Tall Cedar Bowl
By: As Wood Turns
September 02, 2016 · 3,766 views

http://www.AsWoodTurns.com My mother has had a turned redwood vase for as long as I can remember. Upon reading the inscription on the base, my grandfather made it from redwood they obtained from a visit to the Redwoods two years before my birth. My mother loves this bowl. At our home in Portland, we had a large cedar tree that my mother liked when she visited us. We had to cut it down but I've saved some of the wood. I'm going to turn another vase for my mother. This one from the cedar. Maybe she'll put them together: one from her father; one from her son. The vase is Titan cedar about 6 i

 

Ваза из трех деталей
By: Аleksey Bek
August 30, 2016 · 1,309 views

Подготовил три детали для склейки и последующей обработки вазы. Одна деталь комбинированная из яблони и ясеня. Две другие из ясеня. В следующем видео буду обрабатывать на токарном станке.

 

Ölstop Woodturning
By: Elias Klingvall
August 28, 2016 · 913 views

Segment ölstop gjort av Ask och Valnöt Gammelgarn Ängmans Snickeri Gotland

 

Kingwood Hollow Form
By: Daniel Vilarino
August 23, 2016 · 1,397 views

Hola/Hi! Este video está en Inglés. Si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/kPVkV-OS8qw ***This video is in English*** En este video realizo una forma hueca con un trozo de madera de Kingwood que traje de Perú. ***In this video I make a hollow form in Kingwood, a piece I brought from Peru*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make comments, give it a 'like' and subscribe to m

 

E53 - Broken Hollow Form, Yandles Show and Wax Molds
By: M. Saban Smith Woodturning
August 19, 2016 · 1,822 views

This week, I'm really pleased to announce that I will be demonstrating for BriMarc Tools and Machinery at Yandles Woodworking show in Somerset, UK on 9th and 10th September demonstrating the Nova Comet lathe and chuck. For more information, visit: http://www.yandles.co.uk http://www.brimarc.com

 

Miniature Vase From A Rose Root - A Thorny Woodturning
By: As Wood Turns
August 12, 2016 · 6,595 views

http://www.AsWoodTurns.com I dug up a rose bush from my garden and saved the root. It was not very big but I thought that I'd try to turn something: either a small hollow form or a small vase depending on how the wood turned. Well, turning was easy; keeping the wood mounted to the lathe was a frequent and big problem. I could not get an adquate grip with either hot melt glue or medium CA glue. I finally had to cut a mortise and tenon and use yellow glue. After all that the vase started to come apart due to the voids and cracks in the root ball. In the end, the little 2' vase has unique figure. I'll be on the lookout for larger rose roots for future projects. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Bach Guitar Calm under license via Adobe Premiere Elements Smart Sound.

 

Tall Plywood & Mesquite Vase part 2
By: Mike-N-Texas Woodturning
August 12, 2016 · 1,508 views

Mike turns a deep wooden vase from stacked & glued sections of Plywood & Mesquite, he uses a home made steady rest & Hollowing rig to help hollow it out.

 

Small Hollow Form
By: David Schneider
August 12, 2016 · 53 views

This video is about Small Hollow Form. As I have gotten back into woodturning because of the unbearable weather we have been having, I decided to do a smaller piece that is somewhat difficult, That is to take a solid piece of wood, turn it to the shape you desire and then hollow it out making the sides very thin. This is an example of that process.

 

Tall Plywood & Mesquite Turned Vase Part 1
By: Mike-N-Texas Woodturning
August 11, 2016 · 1,331 views

Mike turns a deep wooden vase from stacked & glued sections of Plywood & Mesquite, he uses a home made steady rest & Hollowing rig to help hollow it out.

 

Southwestern Vase with Thunderbird Feature Ring
By: Steve Lindsley
August 07, 2016 · 18,127 views

Even though this project is only 6 inches tall it still has its challenges. The thunderbird feature ring is a classic for this style turning. It was a lot of fun to make. I hope you enjoy the video. Comments and questions are always welcome. Music from the YouTube free music library. Including: Airport Lounge - Disco Ultralounge by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100806 Artist: http://incompetech.com

 

Vas Woodturning
By: Elias Klingvall
August 07, 2016 · 224 views

Segment vas gjord av Alm och Päron Gammelgarn Ängmans Snickeri Gotland

 

Woodturning Miniature Hollow Form With My New DIY Tools
By: As Wood Turns
August 05, 2016 · 6,542 views

http://www.AsWoodTurns.com This little vase took some preparation. I did not have smaller tools to keep the top hole to a minimum. So, in the last video, I made a set from Allen wrenches. This little vase is about three inches tall and two inches diameter. It is finished with shellac friction polish. What is the fascination with hollowing so much thru a tiny little hole? You have to try to find out. :) Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Bach Guitar Calm under license via Adobe Premiere Elements Smart Sound.

 

Woodturning With The Naked Turner Ironwood Vase
By: Erik Anderson
August 02, 2016 · 63,411 views

I turn and Ironwood Vase

 

Turning a Small Hollow Form
By: Mike Peace Woodturning
July 29, 2016 · 3,859 views

I demonstrate How to Turn a small hollow form of box elder including how I hold the piece on the lathe and the woodturning tools and techniques for hollowing. Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Redwood and Coffee
By: Jeremy Edwards
July 25, 2016 · 30,732 views

Dried up Redwood crotch vase with some Coffee filler.

 

wood turning # 50 live edge cedar vase
By: Woodslee Summercraft
July 23, 2016 · 5,092 views

My first time turning Cedar. This live edge vase is inspired by Al Furtado and a gift for my neighbours 75th birthday today. I hope she likes it If you are in Canada and would like to get some yorkshire grit or hampshire sheen you can contact me here woodsleesummercraft@gmail.com or sales@hampshire-sheen.ca Check out Al's work here https://m.youtube.com/user/Alfurtado1

 

Woodturning With The Naked Turner Walnut Hollowform Vase
By: Erik Anderson
July 17, 2016 · 12,357 views

In this video I turn a hollowform vase out of a piece of walnut trying to get better at using my new Lyle Jamieson Hollowing system.

 

Wood turning carrot wood claw vase by Al Furtado
By: Rebel Turner
July 10, 2016 · 3,420 views

This is an old video turning carrot wood claw vase that I was debating whether to post or not due to missing footage again. I am posting this to fill the gap of me being away from my shop for so long. I will be back as soon as I can. Thank you all

 

Natural edge hollow form Part 2, Hollowing and laser meassuring.
By: Lyle Jamieson
July 08, 2016 · 1,967 views

Part one is the outside planning the shape and design options. I show my thought process to create the best possible use of the white birch root burl. Part two shows hollowing techniques with boring and laser measuring use. Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project oriented videos. I still hope over the long haul to cover all the techniques over multiple videos. This project format is much

 

Woodturning at 54a. #86 'Yew 2'
By: Keith Barrow
July 07, 2016 · 5,890 views

Two pieces made from the same branch of Yew.

 

Wood Turning a Fish Vase
By: Tommy Akridge Designs
July 07, 2016 · 79,151 views

This video is about making a fish vase out of cedar wood hope you enjoy this video and please share. Be sure to follow all safety rules when using your equipment, eye protection. this is not a how to on equipment, just on the products. My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy Drifting 2 by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Segmented Vase with Large Opening
By: Turntastic Wood Designs
June 30, 2016 · 10,146 views

This was a long but fun build.

 

Wood turning Norfolk Island Pine vase by Al Furtado
By: Rebel Turner
June 27, 2016 · 5,365 views

I recorded this video a while back but had never posted it because I had lost footage on it. Well I decided to do a bit of info on what was missing in order to post it. The orientation on the wood is different and gave me what I believe to be a nice effect. I hope you like it.

 

Woodturning With The Naked Turner Figured Maple Vase
By: Erik Anderson
June 26, 2016 · 9,911 views

I turn a 15' by 5.5' Figured Maple Vase and make a tool to complete the hollowing process

 

#63 Woodturning Emerging Yew UKIWS Finale!
By: Yuval Lahav Woodturning
June 24, 2016 · 4,763 views

After spending the weekend in the UK, and doing a live demo at UKIWS (UK and Ireland Woodturning Symposium), I took the piece I demoed on home with me to Italy, and finished it in the comfort of mine own shop. Martin Saban-Smith: https://www.youtube.com/user/workingimage Mike Waldt: https://www.youtube.com/user/TheCymruBoy Steve Twydell (Templeboy Turnings): https://www.youtube.com/user/stevo15771 Robert (Rob) Venus: ????????? Bram Sharp: https://www.youtube.com/channel/UCEHcSv7-eoRVkyyksXsnrBA Tom Stratton: https://www.youtube.com/user/acolyteturner Leon Britton: http://www.wood-youbel

 

Walnut Hollow Form
By: Peter Matthew
June 24, 2016 · 529 views

This week I made a hollow form out of Walnut wood. website: http://www.peterturnswood.com ----------------------------------------­---------- Music by Brock Berrigan: http://www.brockberrigan.com ------------------------------------ To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'. Under 'Featured Channels' is 'Peter Matthew 2'. Click that and subscribe to that channel :) ----------------------------------------­­­­­­­­­­­­­­­­-------------------------­-­-­-­-­-­-­-­-­-­-­-­-­-­- Want to do a sticker swap? Send me an email: peterturnswood@gmail.com Want to send me stuff? Mailing address: Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

Woodturning a Mountain Ash Vase
By: Jerry Paul
June 24, 2016 · 1,080 views

Really beautiful grain in this vase! I'm sure glad I still have quite a lot of these logs.

 

2x4 segmented vase Fast and dirty edit
By: Rich McNatt
June 19, 2016 · 638 views

quick look at a large vase made with 2x4s

 

2x4s as a segmented vase? Can't hurt to try.. or can it?
By: Rich McNatt
June 16, 2016 · 2,260 views

I had a few pine 2x4s laying around and some time on my hands.. enjoy!

 

Square Hollow Form by Jack Morse
By: Gwinnett Woodworkers
June 06, 2016 · 5,637 views

Jack Morse exercises his artistic skills to demonstrate how to make a square hollow form box using a band saw, scroll saw, and lathe. (handout below) A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/making_a_square_hollow_form.pdf Recorded and presented in HD 01-14-2016 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Woodturing Cherry Vase
By: Daniel Menrad
June 06, 2016 · 595 views

This Vase is made of Cherry wood with veneer and an Aluminum inlay. It is polished to a high gloss finish and has a walnut rim and foot. Enjoy

 

Yew Vase
By: Olivers Woodturning
May 31, 2016 · 205 views

Yew hollow form 340mm x 250mm (13 1/2' x 10') finished with CA glue and buffed with Chestnut buffing system

 

#114 Building a Segmented Vase Part 3-Turning and Finish
By: Stephen Ogle
May 30, 2016 · 61,245 views

Finishing up this series with turning the segmented vase and finish with Tung Oil and Paste Wax. My segmenting sled video.https://www.youtube.com/watch?v KCFgyYYjJeg&list PLGsnYf7PysCQVT7EYNfJCKXVZA8pWG0q8&index 3

 

#113 Building a Segmented Vase Part 2
By: Stephen Ogle
May 29, 2016 · 105,356 views

Part 2 of this series starts by cutting and planing my stock. We then move into cutting the segments that will make up each ring in the vase and finish this video with the glue up. Enjoy!

 

The Serona Segmented Vase
By: Kyle Toth
May 26, 2016 · 287,330 views

Finish I use: http://amzn.to/2h026Pe Buffing Wheels: http://amzn.to/2xWSCLz Tools I use: Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Thin Parting Tool- http://amzn.to/2jc4Xcd Drum Sander- http://amzn.to/2zaqSV9 Drum Sander Sand Paper- http://amzn.to/2zuUsqT Glue- http://amzn.to/2ytfS8f Subscribe to my channel https://www.youtube.com/channel/UCn_4fr5sKRorFuq479M7Kig?view_as subscriber This is the 95th Vase that I have turned in a series of 100 vases and bowls that I started back in 2007. If you are interested in this vase contact Wood

 

Oak Vase Hollow Form Vase
By: Peter Matthew
May 20, 2016 · 525 views

In this video, I turn a small Oak limb into a nice little vase. I used my kelton hollowing jig for the hollowing. It's still a little new to me, but I'm getting better at using the jig. Thanks for watching! Show your support by subscribing! www.peterturnswood.com ----------------------------------------­---------- Music by Brock Berrigan: http://www.brockberrigan.com ------------------------------------ To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'.

 

Willow tree in a Willow vase
By: Rich McNatt
May 19, 2016 · 654 views

I just cleaned the shop so what better way to enjoy a clean floor? yep put a large log on the lathe and make a mess, after turning the vase out of Willow, I thought it would be cool to do some power carving on it so I added a Willow tree. this is up for sale as of 5/20/16

 

#112 Building a Segmented Vase Part 1 The Plan
By: Stephen Ogle
May 18, 2016 · 9,588 views

The first video in my next segmenting project. Covers designing a nine inch segmented vase and calculating our segment rings.

 

wood turning ,finally a vase from a log no.9
By: Garry Cottee
May 18, 2016 · 316 views

finally found a log that didn't check on me ,completed my second hollowing experience and I'm happy .

 

Turning a Greek Vase
By: Steve Lindsley
May 15, 2016 · 8,809 views

For my segmented turning project for this year I decided to stray away from my normal Southwest inspired pieces and go with this small Greek vase. I wanted to try my hand at making a Greek key for the feature ring. While it was a challenging project I'm very pleased with the end result. I have a separate video on how I made the Greek key and another on how I lay out my segmented turnings. Please check them out if you have a chance. Comments and questions are always welcome. Music by: George Street Shuffle by Kevin MacLeod is licensed under a Creative Commons Attribution license (https:

 

A Greek Key Feature Ring
By: Steve Lindsley
May 15, 2016 · 10,694 views

In this video I show how I made my Greek Key feature ring for my Greek vase called a Lekythos. It was a challenge. As this was my first attempt at a fairly complicated feature ring I learned a few things. In the end I'm very pleased with the way it came out and it looks good in my vase. If you have any questions or comments please leave them below. Thanks for watching Music by: Medium Rock by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Способ крепления большой заготовки в токарном
By: Аleksey Bek
May 15, 2016 · 5,596 views

Рассказываю о своем методе крепления большой вазы для обработки в токарном станке. Отдельно делаю ножку и потом центрую ножку с заготовкой вазы для дальнейшей обработки. Способов крепления много, токарный патрон дает возможность более простого решения.

 

#59 Woodturning Olive Emerging Lidded Vessel
By: Yuval Lahav Woodturning
May 13, 2016 · 69,652 views

Picking up an Olive branch, not knowing what to make of it, it's one of the best starting points there are!! And it yielded this emerging lidded vessel. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Brett Saxon - Atavistic Cullah - Lucy Jeffrey Philip Nelson - Say What All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Woodstained Mini Vase
By: Nick Zammeti NZ WoodTurning
May 12, 2016 · 7,084 views

so, here I'm playing around with some wood stain on a mini vase I made. I quite like the affect this had actually. Hope you like it and it gives you some ideas.

 

A Vertically Laminated Vase
By: Ian Maude
May 09, 2016 · 373 views

A first attempt at a vertically laminated vase from some spare pieces of wood. The Little Garden Shed Workshop - https://www.youtube.com/channel/UCHEczAGapgRq37HBQM_FtoA UKIWS Website - http://www.ukiws.co.uk UKIWS facebook page - https://www.facebook.com/ukiws Category

 

Vase build--2 weeks in less than 15 minutes
By: Mark Dolan
May 09, 2016 · 1,210 views

I created this video with the YouTube Video Editor (http://www.youtube.com/editor) Don't know what the clicking noise is-I used youtube's music.

 

Mothers Day Gift Vase from Star Fruit Tree Wood
By: OG Timbercraft
May 08, 2016 · 214 views

My Entry to Shane's Hobby Shop Mothers Day Contest 2016 https://www.youtube.com/channel/UCP8FfY7yOI98s_OInV_oopw Shot on Samsung Galaxy S6 and edited on Sony Imagination Studio 12 Platinum. I know to be the one of the best woodworker or one of the top woodworker of you tube you have to learn from the most popular woodworkers and do as they do. Please see my other videos below. Your subscription motivates me to continue uploading my builds. You can also follow me on twitter @OrelyGarcia and on Instagram #Orely Garcia #OGTimbercraft How to make a Wood Centering tool & Channel Spotlight ht

 

birch vase from a log no.8
By: Garry Cottee
May 06, 2016 · 312 views

woodturning a vase from a log ,third attempt at this not found the right log yet may be its the type of log I'm using will try to find a different species to try .

 

Open weave maple vase
By: Steve Krumanaker
May 04, 2016 · 46,557 views

Turning and embellishing a small maple vessel with an open weave pattern. Vase is hollowed to about 1/8' thick, pierced and wood burned for 3d effect

 

Preview video of the vase.
By: Mark Dolan
May 03, 2016 · 69 views

 

American White OAK Vase
By: Nick Zammeti NZ WoodTurning
April 30, 2016 · 1,157 views

This is a quick video of a small vase I made earlier in the week. Hope you enjoy the watch. Please Like & Subscribe Music provided by Music: http://www.bensound.com

 

Woodtuning Walnut & Sapele Vase
By: Daniel Menrad
April 30, 2016 · 232 views

I made this Vase using walnut and sapele and some black veneer. I turned this Vase at an event in a school to show the turning process. Hope you like it!

 

Woodturning at 54a. #73. An Economy Vase
By: Keith Barrow
April 29, 2016 · 7,149 views

Here I make a vase out of 6 different types of wood,all cut from the outers of bowl blanks.

 

Segmented vase with a different shape
By: Rich McNatt
April 29, 2016 · 427 views

I make a segmented vase using Mahogany and Maple

 

A gift to the relaitives of a wood turner
By: Rebel Turner
April 28, 2016 · 2,410 views

I just made this vase as a gift to the family of a local woodturner that passed away recently as a thank you for all the wood I got from them. I hope that they will like it and that the wood turner would also have like it as well. . Carroll E Wilhelm did amazing segmented work I wish I had met him. Also a sad day to hear that one of my much admired wood turners Bob Hamilton has passed away, RIP my friends

 

Walnut /Birdseye Pine vase. 2009 pieces
By: Mark Dolan
April 23, 2016 · 129 views

 

Segmented Brick Vase
By: Kyle Toth
April 22, 2016 · 876,091 views

Finish I use: http://amzn.to/2h026Pe Buffing Wheels: http://amzn.to/2xWSCLz Tools I use: Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Thin Parting Tool- http://amzn.to/2jc4Xcd Drum Sander- http://amzn.to/2zaqSV9 Drum Sander Sand Paper- http://amzn.to/2zuUsqT Glue- http://amzn.to/2ytfS8f This is my 94th vase in a series of 100 vase and bowls that I started back in 2007. Its made in ebony and exotic woods out of Mexico. If you interested in this vase head over to http://woodbytoth.bigcartel.com For inquiries contact woodbytoth@gmail.c

 

Practice makes perfect
By: Rebel Turner
April 20, 2016 · 1,656 views

Practice makes perfect. After the Ipe segmented hollow vessel I knew there had to be a better way to do this so I decided to go about it with a different approach that removed all the mishaps and aggravations I was face with.

 

Woodturning - Colouring hollow form with Pewter collar
By: Peter Woodbine
April 17, 2016 · 2,511 views

Colouring a holllow form and adding a Pewter collar with finial. Colouring inspired by YouTube superstars such as Captain Eddie Castelin and Sam Angelo the Wyomingwoodturner. Pewter casting ideas from demos seen on YouTube by Keith Larrett for the NEFWA. Background music - 'Driving the PCH' by courtesy of Teknoaxe - http://www.youtube.com/user/teknoaxe 'Memories' (infiniti loop) by Vidian - http://dig.ccmixter.org/files/Vidian/52190 Ft: TheDice

 

Carrot Wood Vesel
By: Rebel Turner
April 10, 2016 · 1,394 views

I turned this Carrot Wood vessel and ended up with a very special piece with a special meaning

 

A Spalted Vase Wood Turning
By: Geomobila
March 30, 2016 · 399 views

My first vase made from a branch full of knots. I milling vase inside as much as I could, I have not longer chisels. Finally I finished surface with linseed oil. Please give subscribe for more videos...thanks !

 

Birch root burl with undercut shoulder using the boring bar with laser measuring.
By: Lyle Jamieson
March 30, 2016 · 4,442 views

Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project oriented videos. I still hope over the long haul to cover all the techniques over multiple videos. This project format is much better at showing the entire turning sequence start to finish. My focus is on teaching methods of turning that are easy and safe and that are versatile for any kind of turning you wish to pursue. I hope you enjoy my videos,

 

Wood turning The vase that became a bowl ? no 6
By: Garry Cottee
March 26, 2016 · 206 views

I wanted to turn a end grain vase from a birch log ,but as I turned it a few checks appeared as i released more pressure on the log fibres. which kept growing ! so I turned through them and made what was left into a small bowl.

 

Woodturning Bamboo HollowForm
By: Daniel Menrad
March 25, 2016 · 1,534 views

Woodturned Bamboo Bowl/Hollowform. Hope you like it.

 

Hand Hollowing! Poplar Hollow Form
By: Peter Matthew
March 25, 2016 · 521 views

This video shows how I hand hollowed a little hollow form from Poplar. I'm getting more comfortable with the hollowing tools and have already made several other successful hollow forms. Thanks for watching! ------------------------------------------------------ My website: www.peterturnswood.com ----------------------------------------­­­­­­­­- To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'. Under 'Featured Channels' is 'Peter Matthew 2'. Click that an

 

Woodturning Walnut Vase
By: Daniel Menrad
March 23, 2016 · 270 views

Walnut Vase made of 132 pieces. Hope you like it.

 

Pot Belly Vase Part 2
By: Rebel Turner
March 22, 2016 · 5,883 views

Pot Belly Vase Part 2 I was debating on 2 parts of 21 minutes each .a time lapse that I removed and relisted or one 42 min video please comment on what you prefer. I added some rings on the neck detail after I was editing this video. Did you spot it? As we know some pieces can take over 2 hours to complete and I know you don't want me to upload a 2 hour video LOL Thanks I appreciate your feedback.

 

Pot Belly Vase Part 1 Wood turning by Al Furtado
By: Rebel Turner
March 21, 2016 · 2,119 views

Pot Belly Vase Part 1 I was debating on 2 parts of 21 minutes each .a time lapse that I removed or one 42 min video please comment on what you prefer. I put up the time lapse again for experiment. As we know some pieces can take over 2 hours to complete and I know you don't want me to upload a 2 hour video LOL Thanks I appreciate your feedback.

 

Wood turning Deep crotch Carrot wood vessel by Al Furtado
By: Rebel Turner
March 19, 2016 · 2,682 views

Deep crotch Carrot wood vessel with amazing colors. I prepared this blank this afternoon knowing it was a risky piece as I knew the crotch was deep and about 2/3rds of the piece. Turning it was a pleasure as it cut easy and took a good shine juice finish.

 

Spraying Fixture for holding Hollow Forms; Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
March 18, 2016 · 4,841 views

Sam shows off his device for holding hollow forms. The fixture holds the piece securely while it is turned by hand as it is sprayed.

 

Mahogany pallet wood economy vase
By: yak branson
March 16, 2016 · 105 views

Hope this is a good enough explanation of the end product. I have only done this one economy vase so dont think i will make another.

 

Wood Turning - Natural Edge Ash Vase - Part 2
By: Mike Waldt
March 15, 2016 · 11,430 views

This video sees me hollowing and finishing the Ash Vase. UKIWS - http://www.ukiws.co.uk/ UKIWS on Facebook - https://www.facebook.com/ukiws/ Hampshire Sheen: http://www.hampshiresheen.com/ Paul Crabtrees Hollowing King: http://toolsbycrabtree.com

 

Large Mixed Wood Vase
By: Nick Zammeti NZ WoodTurning
March 15, 2016 · 5,483 views

This Vase was made with lots of different pieces of wood. This project took some time as I made a few changes throughout but it turned out ok. If you like watching please like and subscribe to this channel for more funky woodturning projects coming soon.

 

#64 Bradford Pear Vase
By: Uncle Cys Woodshop
March 15, 2016 · 2,144 views

Decided to try out a piece of the Bradford Pear I got from my friend Steve. Its green so I'm not expecting it to stay perfect. More about getting some lathe time that is for fun instead of work.

 

Wood turning Translucent maple vase by Al Furtado
By: Rebel Turner
March 14, 2016 · 6,087 views

Another day in the shed allowed me to turn this 9' tall Translucent maple vase. The thickness is translucent 1/8' or less down to the base This vase took the most planning I have ever done on any vase moved it off axis quite a few times to make sure I didn't take any of the bark on it.

 

wood de bois vase segmenté (segmented vase)
By: bovitch bov
March 12, 2016 · 1,231 views

tournage d un vase segmenté

 

Tall Segmented Vase
By: Skip Deedon
March 12, 2016 · 768 views

Creating a 20' tall segmented vase.

 

Turning a Vase - Challenge Tree 2016
By: Fabian's Tiny Workshop
March 10, 2016 · 1,855,488 views

I'm turning a Vase out of....well I don't know what kind of wood it is ;-) This is my entry for Dominic Bender's Challenge Tree 2016 http://www.dominicswoodworks.com/challenge-tree-2016/#more-2667 https://www.youtube.com/playlist?list PLxZz9NOCW96SiEjfkhXvL7hdCRFiJhakF

 

Turning A Segmented Vase
By: Kyle Toth
March 10, 2016 · 23,771 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4fr5sKRorFuq479M7Kig?view_as subscriber This is my 93rd vase. It is in a series of 100 vases and bowls. It is made in walnut, holly and ebony. If you interested email woodbytoth@gmail.com To keep up with my work throughout the week check out the links below. Thanks for watching! Love Tōth Also if you want to know why I love what I do check out my artist profile picture video done by Vigil Films. Its part of there Ardent Collection.... http://youtu.be/JjUzuECZN-0 Site: http://www.woodbytoth.com Facebook: https://facebook.com/woodbytoth Instagram: http://instagram.com/tothtoth Store: http://woodbytoth.bigcartel.com To support my videos and help me make more... https://www.patreon.com/woodbytoth Song: Blackmill-Love at Heart http://youtu.be/k1VlFvautrQ

 

Wood Turning - Natural Edge Ash Vase - Part 1
By: Mike Waldt
March 09, 2016 · 14,501 views

Part 1 of turning a Natural Edge Ash Vase. Part 2 will follow shortly. UKIWS Website: http://www.ukiws.co.uk/ UKIWS on Facebook:https://www.facebook.com/ukiws/ Guitar by Michael Berk https://www.youtube.com/user/mikeberk810

 

Wood turning # 38 Egyptian kings Crucible hollow form part 2
By: Woodslee Summercraft
March 09, 2016 · 4,011 views

This is part 2 of my attempt at recreating a type of ancient egyptian art form vessel, I hope you enjoy the end result.

 

Vessel and Lace wood turning by Al Furtado
By: Rebel Turner
March 05, 2016 · 1,634 views

I used a piece of leather to exenterate and not hide the crack on this vessel to create this vessel and lace. Comments are welcomed. Please like share and subscribe.

 

Wood Turning a Three Ring Bud Vase
By: SP Wood Art
March 03, 2016 · 145,017 views

In this video I experimented a little by designing, turning, and dyeing a 3-ring bud vase in a modern style. I attempted to keep the design clean, simple, flat, and with 90 degree angles which are often the traits of the modern style, or era. I was happy with the result and would diffidently try this project and design again with a nice piece of wood. If you would like see more of SP Wood Art visit us at: www.spwoodart.com www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts

 

Wood Turning #126 Branch Vase
By: The Tiny Trailer Workshop
March 03, 2016 · 2,883 views

I would also like to share the playlist for the 2016 Tree Challenge no wait... that is the Challenge Tree 2016 hosted by Dominic Bender https://www.youtube.com/playlist?list PLxZz9NOCW96SiEjfkhXvL7hdCRFiJhakF to see other things that can be made from trees! A branch found along a path can be a good walking stick ... or it might have more to it than that! This one was too short for walking with... unless you are a dog... but there was something about the way the end swooped over the way it did that made me stop and look at it a second time! And it seems that if I look at it twice... I usual

 

Wood Turning #126 Texted Branch Vase
By: The Tiny Trailer Workshop
March 03, 2016 · 931 views

A branch found along a path can be a good walking stick ... or it might have more to it than that! This one was too short for walking with... unless you are a dog... but there was something about the way the end swooped over the way it did that made me stop and look at it a second time! And it seems that if I look at it twice... I usually end up bringing it home! At first I was unsure of the species but once I started turning it I began to recognize the attributes of red alder, after it has started to spalt. As I mention in the video the center of it was pretty soft, but the dowel should fix

 

Make Hollowing Tools & Woodturn Fantastic Vessels and Hollowforms
By: Wood Frontier
February 29, 2016 · 4,653 views

I wanted to make hollow vessels and other hollowforms in my woodturning. I needed to make a tool that would extend through the narrow opening and into the interior of my piece. Please Subscribe for more woodturning and woodworking videos. https://www.youtube.com/channel/UCaSn6Z2xAS5kW8cn5mXSKGg?sub_confirmation 1&feature iv&src_vid 8hhNBnyusmI&annotation_id annotation_697566415 This woodturning tool will allow the creation of wooden hollow forms such as ornaments, vases, vessels, urns, and other interesting designs. The technique for making a hollowing tool is adapted from master woodtur

 

Banyan Tree Vase by Al Furtado
By: Rebel Turner
February 29, 2016 · 3,866 views

While organizing and cleaning out my shop I came across this old piece of Banyan. the markings as remarkable as they were on my first turning of this wood.

 

Wood turning a hollow wood form vessel
By: Tommy Akridge Designs
February 29, 2016 · 4,328 views

Check out these videos of the hollowing and the finish. Hollowing this vessel https://youtu.be/pBbk23XDs_A Finishing this vessel https://youtu.be/Cjku9hMlJiE Check out my channel https://tommyakridgedesigns.com My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

CoCoon
By: Olivers Woodturning
February 27, 2016 · 99 views

This piece was turned for the AWGB seminar in 2015. It's been turned from Yew which is over 600 years old. The piece has been decorated with hot melt glue which has been painted.

 

The Mixed Wood Vase
By: Nick Zammeti NZ WoodTurning
February 25, 2016 · 471 views

Here's a video I put together explaining how I made this mixed wood vase. Now I can do this on a small scale, I'm ready to do a larger one. I hope its useful in some way.

 

Woodturning and Ebonising a Segmented Grecian Pot
By: M. Saban Smith Woodturning
February 23, 2016 · 2,674 views

This week, I look exclusively at the ebonising and staining process of oak in the second bowl from the segmented kit I started in last week's video. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK & Ireland Woodt

 

wood turning # 37 ' Egyptian King's Crucible ' hollow form part 1
By: Woodslee Summercraft
February 22, 2016 · 3,700 views

wood turning an art form depicting ancient egyptian beliefs in gods, I have been having a lot of fun with this piece, part 2 will be uploaded soon to complete this hollow form.

 

Самодельные токарные резцы
By: Аleksey Bek
February 22, 2016 · 4,482 views

Краткий обзор назначения токарных резцов по дереву. Резцы собственного изготовления и их назначение. Материал для изготовления самодельных резцов. Где взять.

 

Vessel with Spinning Top Lid - Woodturning
By: Fabian's Tiny Workshop
February 19, 2016 · 3,379 views

Making a Vessel with a Spinning Top Lid

 

woodturning silverbirch bud vase no.2
By: Garry Cottee
February 16, 2016 · 1,366 views

I'm happy how the piece turned out but my camera work doent do it justice ,the pattern on it is truly pretty Keith Barrow https://www.youtube.com/channel/UC1xj8Lp_fmCX0GXr208rP9w

 

#48 Mulberry Lidded Hollow Form Part 2
By: Yuval Lahav Woodturning
February 14, 2016 · 24,830 views

Finally I took the time to finish the Mulberry vessel I started a couple of months ago (https://www.youtube.com/watch?v Ex5G8d5LnCM), but that is just like it is, sometimes you Mulberry right a way, and sometimes it waits for the right time. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Jeffrey Philip Nelson - Shame On Me MC Cullah - Lucy All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Turning A Segmented Vase
By: Colbe Pease Woodworking
February 13, 2016 · 403 views

In this video, I take some turning blanks I purchased online, and I make a segmented vase for my mom for Valentines day. The woods I used were Bloodwood, Walnut, Maple, and Alder.

 

Hollowing out a wooden vessel.
By: Tommy Akridge Designs
February 11, 2016 · 1,433 views

My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe they will be better turners. Thank You For Watching Tommy

 

Wood turning hollow form vessel
By: Tommy Akridge Designs
February 05, 2016 · 14,553 views

My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Eastern Red Cedar Hollow Form, Part 2
By: Daniel Vilarino
February 04, 2016 · 1,607 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/WFNo2nAZvkU *This video is in English* Si quieres ver la primera parte de este video por favor haz un click aquí: https://youtu.be/7E8Q-WgM1dg If you would like to watch the first part of this video, please click here: https://youtu.be/BuC_an3vOKU En este video, completo el trabajo que comencé en la primera parte, que fue la de hacer la espiga. Acá le doy forma al exterior y hago el vaciado de la forma hueca. *In this video, I complete the work done during part

 

Woodturning a 3 Sided Bud Vase
By: Jerry Paul
January 29, 2016 · 4,226 views

This didn't quite work out as planned.... This is the first time I tried to make something symmetrical using my method of eccentric turning where I use only 2 of the 4 jaws in my chuck. ... That worked great - it was keeping consistent on each side that I had trouble with. It all ended well, with the finished product being a little different than originally planned... O.k., quite a bit different, LOL, but it can still function as a bud vase. A WARNING TO THE EASILY OFFENDED!! - I couldn't help at the end of the video but describe what I thought the end result seemed to resemble. (its a bit phallic) LOL Enjoy!!

 

#47 Spiraled Cypress Vessel Part 2
By: Yuval Lahav Woodturning
January 28, 2016 · 5,316 views

The conclusion of my first attempt at a spiraled vessel, and oh boy do I love it!! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Josh Woodward - Branches All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

#46 Spiraled Cypress Vessel Part 1
By: Yuval Lahav Woodturning
January 24, 2016 · 9,675 views

I've never tried my hand at spiraling, and I had a test piece of Cypress on the lathe... you can guess what that leads to... Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Cullah - Gone Away David Mumford - Lover All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Shop Time 003 Zebra Wood Hollow-ish Form
By: Living Wood Creations -wood turning videos-
January 20, 2016 · 150 views

This a 6 1/4' x 6 1/4' x 2' zebra wood hollow-ish form featuring the patent pending clamp wrench Email - livingcreationsturning@gmail.com Other channel - LetsMakeStuff (no videos yet)

 

Wood turning a wood vessel/bowl
By: Tommy Akridge Designs
January 18, 2016 · 12,583 views

Making a vessel with a finial lid

 

Maple vase and heart shaped bowl VFD test by Al Furtado
By: Rebel Turner
January 16, 2016 · 1,242 views

I decided to give the lathe a real test with the VFD by turning a Maple vase and a natural edge Heart shaped bowl. The lathe seems better than I imagined. correction on the vase..I turned was a piece of maple not the carrot wood.

 

#158 Sapele Vessel with segmented ring 2
By: Miguel Sanchez
January 04, 2016 · 2,397 views

Grid of coefficients for segments: http://www.tornoartesano.es/files/corte-de-segmentos.jpg Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#158 Vasija de sapeli con anillo segmentado 2
By: Miguel Sanchez
January 04, 2016 · 11,883 views

Tabla de corte de segmentos: http://www.tornoartesano.es/files/corte-de-segmentos.jpg Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#157 Sapele Vessel with segmented ring, 1
By: Miguel Sanchez
January 04, 2016 · 1,470 views

Grid of coefficients for segments: http://www.tornoartesano.es/files/corte-de-segmentos.jpg Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Deep Cut by 'I frutti del legno'
By: Aquila747a
January 03, 2016 · 363 views

Make a simple hollow whit a bowl gouge - deep cut technique

 

Oak Vase
By: Jeremy Edwards
January 02, 2016 · 1,471 views

Black Oak Burl Vase for my Mom's Birthday.

 

Woodturning at 54a. #53. A Vase from offcuts
By: Keith Barrow
December 27, 2015 · 1,689 views

A vase made from offcuts I had lying around.

 

woodturning # 21 lidded hollow form
By: Woodslee Summercraft
December 24, 2015 · 2,345 views

I turned this hollow form a couple of weeks ago, a christmas gift for my mum, the lid was made by my dad many moons ago and set aside for who knows what, so I like to think that this christmas my Dad and I made this for you Mum. X

 

Olive Vase
By: Jeremy Edwards
December 22, 2015 · 98 views

 

Mango slim vase Wood turning by Al Furtado
By: Rebel Turner
December 20, 2015 · 2,103 views

A quick video Mango slim vase Merry Christmas

 

Carved, textured, dyed and finished tulip shaped vessel.
By: Lyle Jamieson
December 20, 2015 · 5,384 views

This tulip shaped vessel was turned and hollowed in part one. Now Lyle carves and textures the petals, dyes with black ink, and finishes with show polish. SPONSORS Mike Hunter of Hunter Tool Company Mike has a holiday special with free shipping on orders over 20.00 Use Coupon code Lyle2016 when you check out. www.hunterwoodturningtool.com Welcome new sponsor Doug Thompson , Thompson Lathe Tools. Mike has been manufacturing my signature Jamieson bowl gouge. Doug created this new gouge to my specks, Thompson steel, Jamieson flute, Jamieson grind. This gouge is more forgiving and has a b

 

Woodturning a Segmented Hollow Vessel
By: Fiaschetti Woodworking
December 05, 2015 · 2,428 views

Please visit my new website http://www.fiaschettiwoodworking.com/ In this video I take an unorthodox approach to the making of a hollow turned vessel by turning it in two halves. This is made out of Paduak and finished with 3 coats of 50/50 poly/boiled linseed oil. This vessel contains 49 pieces. If you have any questions or wish to purchase this vessel please email me at fiaschettiwoodworking@gmail.com

 

Turning a tulip shapped wood vessel using Lyle's captured boring bar and Laser measuring. Part 1
By: Lyle Jamieson
December 04, 2015 · 5,297 views

The first part will cover the turning of the tulip shape vessel. Using the captured hollowing system and with the assist of the laser measuring system. I used the Hunter Carbide cutter for both the outside shape and the inside cutting tool for my boring bar. Includes a full tutorial of the turning process inside and out. SPONSORS Mike Hunter of Hunter Tool Company Mike has a holiday special with free shipping on orders over 20.00 Use Coupon code Lyle2016 when you check out. www.hunterwoodturningtool.com Welcome new sponsor Doug Thompson , Thompson Lathe Tools. Mike has been manufacturing

 

#40 Mulberry Lidded Hollow Form Part 1
By: Yuval Lahav Woodturning
November 28, 2015 · 3,074 views

Turning a hollow form always presents a challenge, but this time it was not just the form, but the machine that failed me. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Jerry Paul - Mars Sunset and Mr Mrs Smith - Even Angels Bite the Dust Which is available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Woodturning a Mesquite Crotch Into a Flying Winged Vase
By: bach thanh
November 22, 2015 · 78 views

 

Spalted Mango vase Wood turning
By: Rebel Turner
November 20, 2015 · 1,413 views

The reason for this video is to show that even after making a mistake you still have the opportunity to fix it. Also to support this cause please support it. The latest developments and progress of The UK & Ireland Woodturning Symposium. Martin Saban-Smith https://www.youtube.com/user/workingi... Steve Twydell https://www.youtube.com/user/stevo15771 UKIWS Website http://www.ukiws.co.uk/ UKIWS Facebook https://www.facebook.com/ukiws/ UKIWS Merchandise http://www.ukiws.co.uk/shop/ Olivers Woodturning https://www.oliverswoodturning.co.uk/ Taylors Mirfield http://www.taylorsmirfield.co.uk/ Hampshire Sheen http://www.hampshiresheen.com/ Axminster Tools & Machinery http://www.axminster.co.uk/ Guitar by Michael Berk https://www.youtube.com/user/mikeberk810

 

wood turning #11 near miss vase
By: Woodslee Summercraft
November 08, 2015 · 1,555 views

turning a log that i found into a vase, unknown wood, near miss, reminds me to always be safe.

 

Turned Elm Vase
By: Carl Jacobson
November 06, 2015 · 26,260 views

I turned this vase from of Elm, and Walnut. I left a bark inclusion on the side. I think this really adds to the piece. Hollowing out something like this can be a little tricky, just take your time. If you try this project be sure to let me know! I would love to see some pictures. RZ Mask: https://rzmask.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order I upload a new project video every Friday, and I'm live Monday on YT and Friday on Twitch. Che

 

Segmented vase
By: Rich McNatt
November 05, 2015 · 5,834 views

 

Woodturning at 54a. #43. A Special Vase
By: Keith Barrow
November 02, 2015 · 2,366 views

A very special vase made out of Padouk and walnut.

 

El Formon Oblicuo, Parte 2, Cortes de Práctica
By: Daniel Vilarino
October 26, 2015 · 26,154 views

Hola/Hi! *** This video is in Spanish, if you prefer to watch the English version, please click in the following link: https://youtu.be/0EcLYjze4fw*** Este video está en Español. Enlace al canal de YouTube de Antonio Sánchez Tortosa: ***Link to Antonio Sánchez Tortosa's YouTube Channel:*** https://www.youtube.com/channel/UCWr_1-HoRv0N9ep1SvL3Yrw Enlace al canal de YouTube de Bruno Gausa: ***Link to Bruno Gausa's YouTube Channel:*** https://www.youtube.com/channel/UCnwpNYYuxX6KbmhX_Dg2lkQ En este video, muestro cómo hacer varios cortes de práctica con el formón oblicuo. ***In this video, I

 

Making a zig zag vase (part 2 of 2)
By: Turntastic Wood Designs
October 22, 2015 · 213 views

Part 2 of making a segmented vase with a zig-zag feature ring You can see part one at https://www.youtube.com/watch?v mLsDzEvEtP0 Please visit my shop at http://etsy.com/shop/turntasticwooddesign

 

Achieving interest to a vase by Al Furtado
By: Rebel Turner
October 20, 2015 · 1,886 views

Achieving interest to a vase with off set. This is another old video that resided in my computer I should be back to turning very shortly

 

first vase
By: Bram the Wadesmill woodturner
October 20, 2015 · 317 views

Apart from making a couple of bowls this is the first project video for some while. Largely inspired by Al Furtado, Yuval lahav and Custom Chris I have tried making a vase out of hazel wood. Links to Three good mates: Harry watts, Mike Waldt and Keith Barrow https://youtube.com/watch?v 4Z8od6aKqoE https://www.youtube.com/channel/UCHEczAGapgRq37HBQM_FtoA https://www.youtube.com/user/TheCymruBoy

 

Wood Tuning My Second Vase
By: Peter Mitchell
October 17, 2015 · 229 views

Tuning My Second Vase. The Last Video On My Phone Sorry About The Music And Speed If I Didn’t Speed It Up It Would Take To Long To Upload. My Internet Is Rubbish. Sorry I Didn’t Get The Final Finish On The Vase My Battery Died On My Phone Again. There Is Some Pictures At The End. Please Leave Comments And Advice If You Have Any It Will Be Much Appreciated. If You Like My Video Please give me Thumbs Up and Subscribe I Hope To Get Better Keep Watching. I forgot to add I did a CA glue finish on the vase. Thank You Pete https://www.youtube.com/channel/UCxRWDm68PUl8XaUCFgp5kcw/videos

 

Wood Turning a Bud Vase
By: SP Wood Art
October 13, 2015 · 1,478 views

Wood turning a small bud vase is extremely fun, gratifying, and is a great way to display flowers. By using glass inserts you can display fresh flowers. If you would like see more of SP Wood Art visit us at: www.spwoodart.com www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural stone or acrylic) that connect to people on an emotional and functional level. Each piece is meticulously designed to look and feel like an art piece holding some fu

 

#44 Walnut Burl Sphere Hollow Form
By: Uncle Cys Woodshop
October 11, 2015 · 7,896 views

2nd Project from the Burl that I acquired recently. No Captions except at the end. Want to shout a thanks out to Yuval for his recent video that reminded me of the ring chuck. Thanks dude. Hope everyone enjoys the change up in music too.

 

Making a zig zag vase (part 1 of 2)
By: Turntastic Wood Designs
October 10, 2015 · 191 views

How to put a zig-zag feature in a vase. A lot of work but a nice pay off. See Part 2 here https://www.youtube.com/watch?v S4-Esgcx2XI Please visit my store at https://etsy.com/shop/turntasticwooddesign

 

Twisted Hollow Form Part 1 â “ Intro and Mounting the Material
By: Gwinnett Woodworkers
October 09, 2015 · 8,733 views

Bill Lynch of Gwinnett Woodworkers hosts this 3 part series on creating a hollow form with a twist. In part 1, he explains the principals involved in making a form resembling a climbing woodbine. Recorded and presented in HD mm-dd-yyyy Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Twisted Hollow Form Part 3 â “ Creating and Shaping the Bines
By: Gwinnett Woodworkers
October 09, 2015 · 13,089 views

After creating a finely shaped hollow form, Bill Lynch creates a pattern on the face, riddles it with holes, and cuts between the holes. Considerable time is spent after exposing the bines to shape them and sand them. The result is spectacular. Recorded and presented in HD mm-dd-yyyy Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Woodturning - Beech vessel time lapse video
By: George Watkins
October 04, 2015 · 1,186 views

A short time lapse video showing me making a vessel from wet/green English beech.

 

Segmented wood turning vases
By: Georgios Paschalias
October 03, 2015 · 127 views

jylotornow

 

Segmented woodturning vases
By: Georgios Paschalias
September 26, 2015 · 280 views

Segmented wood turning vases with Greek Walnut and Maple

 

Tequila Sunrise Vase
By: Carl Jacobson
September 18, 2015 · 10,141 views

I Carved and Airbrushed this piece after seeing Martins video. Martin's Channel https://www.youtube.com/user/workingimage/featured I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?tracking carl Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#11

 

Woodturning A Peek-A-Boo Vase With Launch Disaster
By: As Wood Turns
September 17, 2015 · 8,715 views

http://www.AsWoodTurns.com At a recent business meeting at a hotel, I saw some strange chairs around their pool area. A light flashed on in my head: 'Could I turn something like that?' Well, certainly not a chair of that size but how about a vase. I'm calling this vase a Peek-A-Boo vase since it has a large opening in its side. Rather than sitting down in this area, I can use it for an attractive display. For an example, my wife created a scene with seashells and coral. The vase is a segmented turning from oak consisting of 14 segmented rings of 12 segments each totaling 168 wood pieces. The

 

Naked Turner Japanese Maple Natural Edge Winged Vessel
By: Erik Anderson
September 13, 2015 · 2,061 views

Japanese Maple Natural Edge Winged Bowl

 

How to make a wood vase from a Red Cedar log on the lathe. (Step by step process) Video #2
By: Turnin Too
September 11, 2015 · 23,126 views

The process I go through to make a red cedar wood vase. It's in 'time lapse' with commentary through captions. Music by: the - 126ers 'Summer Nights' and 'Wish you'd come true'

 

Bottle washer tree Vase by Al Furtado
By: Rebel Turner
September 06, 2015 · 5,032 views

bottle washer vase long video real time

 

Vase Hollowing Practice - Using Carbide Cutters
By: Jake Webb
September 01, 2015 · 1,881 views

Finally I get to test out the Carbide Woodturning Tools on a hollowing piece. This is what i intended them for. Sometimes the difficulties don't come from where you expect them to. For my video on making these tools please click here. https://www.youtube.com/watch?v HQTS_RbbaF0. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Wood turning an Ash tall vase
By: Andrea Zanini
August 31, 2015 · 9,402 views

I've been working on a series of turned and decorated vases. The title of this series is ''Across the dark forest'' and this video shows the turning of the next piece in the line. A video of the decoration will follow asap. Thanks for watching and please, check out my website and my FB page. Follow me on Facebook https://www.facebook.com/zaniniwoodcarving/?ref hl Instagram https://www.instagram.com/andreazanini464

 

Mini Hollow Form Woodturning
By: Peter Matthew
August 27, 2015 · 2,324 views

I turned a miniature hollow form this week! The hollowing was done with a homemade hollowing tool that I built with some walnut wood, a small piece of copper pipe, and an allan wrench. This was the third hollow form I've done. ------------------------------------------------------- My eBay store: http://www.ebay.com/usr/dste6080 Contact me: Peterturnswood@gmail.com --------------------------------------------------------------------------- Come back next week for another project and until then, please subscribe!

 

Indian Blanket Vessel Turned
By: Gord Rock
August 26, 2015 · 22,000 views

Links to: Part 1 of the 9 Part Series on making a Segmented Vessel: https://youtu.be/l6D96f21eD0 Creating the Indian Blanket Design Feature Ring: https://youtu.be/hUIUr49Ssiw Building the Steady Rest: https://youtu.be/P0CJF-lMe3E Building the Donut Chuck: https://youtu.be/t-10dXclT_4

 

woodturning an applewood mini vase
By: R Humphrey
August 23, 2015 · 623 views

Turning a chunk of a fallen apple tree into a mini vase on my lathe. The wood had a nice flaw hidden inside. I grow scarlet and gold roses around my wood shop, and fortunately I was able to use one in this short video. The music 'Over Time' was provided by YouTube. Over Time by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Thanks for watching!

 

Naked Turner Rectangular Maple Winged Vessel
By: Erik Anderson
August 23, 2015 · 1,795 views

I try to make a rectangular winged vessel.

 

Woodturning a Segmented Vase
By: R Humphrey
August 17, 2015 · 44,639 views

About a week of work and wait, in a ten minute video. This is a sixteen ring vase, 15 rings of 16, 1 of 17, using mostly Cherry, and some Hickory. Segmented turning is a fun challenge, from planning to completion.

 

Woodturning at 54a. #25 A thingy,or bowl,or vessel.
By: Keith Barrow
August 14, 2015 · 1,025 views

I don't mind 'thumbs down',but at least have the decency to let me know why,otherwise it's a pretty useless exercise by someone who's gutless. Thankyou.

 

Woodturning An Eccentric Or Multi Axis Bud Vase
By: As Wood Turns
August 14, 2015 · 3,165 views

http://www.AsWoodTurns.com This bud vase is spalted birch harvested about a year ago. It is an eccentric turning on four axes: Main and offset by 3/8 inch at 120 degree intervals. A year ago, I rough turned it round and waxed it. It has been laying around my shop since then. It is about five inches tall and two inches in diameter, finished with beeswax and mineral oil followed by buffing. Initially, I envisioned it taller with a neck about three inches longer. But when it neared completion, it did not look right -- so I turned off the neck. Much better without. I turned two coves on two offset axes followed by a large bead on the final offset axis. It was fun. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Brazilan Pepper Tree Vase by Al Furtado
By: Rebel Turner
July 30, 2015 · 3,143 views

Trying out some Brazilian Pepper tree has proven to be a worthy wood to turn. https://www.youtube.com/user/Robbiethewoodturner

 

#26 Mulberry Bowl into Hollow Form
By: Yuval Lahav Woodturning
July 29, 2015 · 2,723 views

When I picked up this blank from my wood pile, I was going for a bowl, but it evolved on its own into a hollow form... Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Josh Woodward - Thanks For Coming Kelly Latimore - Leaving Rooms All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Skinny vase
By: Rich McNatt
July 27, 2015 · 334 views

 

Kimula Segmented Vase
By: Kyle Toth
July 27, 2015 · 77,160 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4fr5sKRorFuq479M7Kig?view_as subscriber The Kimula Vase is my 90th vase in my series of 100 vases and bowls. This vase took around 35 hours to make. It is currently still available. http://woodbytoth.bigcartel.com For questions and inquiries contact woodbytoth@gmail.com. Be sure to turn up the quality to 1080p To keep up with my work throughout the week check out the links below. Thanks for watching! Love Tōth Also if you want to know why I love what I do check out my artist profile video done by Vigil Films. Its part of there Ardent Collection.... http://youtu.be/JjUzuECZN-0 http://www.woodbytoth.com https://m.facebook.com/woodbytoth https://mobile.twitter.com/woodbytoth http://instagram.com/tothtoth Song: Horizon (instrumental) JFX http://youtu.be/TPkkMJOSZBg

 

Woodturning a wide mouth maple vase
By: Jerry Paul
July 26, 2015 · 1,642 views

I haven't posted a video for a while, so I figured I'd better do that. This is a piece of box elder maple that I thought would make a nice little vase. Nothing special... just letting the youtube world know I'm still here. LOL! (I've just gotten a load of mountain ash that I'll be posting a video of soon!)

 

Square top and bottom vase part 2 by Al Furtado
By: Rebel Turner
July 24, 2015 · 1,455 views

Square top and bottom vase part 2 I go through making the final choices on shape and form.

 

Square top and bottom vase Part 1 by Al Furtado
By: Rebel Turner
July 24, 2015 · 1,481 views

Square top and bottom vase part 1 I go through selecting a blank and living by the choices made. https://www.youtube.com/user/yuvallahav

 

Bud Vases and Rings for Prep Day Eight
By: M. Saban Smith Woodturning
July 21, 2015 · 840 views

Not a vastly productive day, as you'll see, but I did manage to get one pen and bottle stopper made, plus five bud vases...plus one with a captive ring (my first successful one ever!)!! You can read more about this project, see images, and possibly make a purchase on my website at http://www.msabansmith.com. Or you can buy pens direct from the shop online at https://www.etsy.com/uk/shop/DistinctivePensUK Keep up with my socially! Facebook: http://www.facebook.com/msabansmith Twitter: http://www.twitter.com/msabansmith Google : https://plus.google.com/ Msabansmith/ Instagram: https://instagram.com/msabansmith Small print and Disclaimer: This video is not intended to be a tutorial on how to turn wood like that shown in this video. The methods I employ may or may not be in best practice and you are responsible for your own safety and following all manufacturers guidelines etc. Please stay safe when wood turning or anything else you choose to do! Thanks.

 

woodturning multy axis vases
By: Robbiethewoodturner
July 17, 2015 · 79,353 views

Hi all here is my latest video Multi-axis vases. got inspiration for this project from woodturner Derek Andrews after seen them in a photo a few years ago. Yuval Lahav https://www.youtube.com/user/yuvallahav Derek Andrews The actual studio is situated at Seafoam on the north shore of Nova Scotia, Canada, http://www.seafoamwoodturning.com/ Here's a list of my latest videos woodturning yew crouch vase https://www.youtube.com/watch?v 96HxD8GbBlU wood-turning a wooden shot barrel https://www.youtube.com/watch?v JmXs0

 

#138 Norfolk Island Pine Vessel, english version
By: Miguel Sanchez
July 13, 2015 · 2,704 views

A little Vessel made of NIP, I hope you like it. Have a wonderfull week Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

' Y ' Vase
By: Rich McNatt
July 13, 2015 · 298 views

 

#23 Lidded Vessel
By: Yuval Lahav Woodturning
July 10, 2015 · 9,420 views

The hardest thing I've ever turned, a Cindy Drozda inspired lidded vessel, and Wow, was that a tough one... Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Cindy Drozda web site - http://www.cindydrozda.com/ Songs in this video are: Brett Saxon - Atavistic Montana Skies - Tunnels Swear and Shake - Suddenly Pierce Murphy - Versailles Ryan Little - Get Up All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Sea grape vase 3 by Al Furtado
By: Rebel Turner
July 09, 2015 · 3,231 views

I've had this video ready for a little while and was debating weather to upload or not. Animated intro modified to this vase.

 

Finishing a Small Rough-Turned Hollow Form
By: WYOMINGWOODTURNER
July 01, 2015 · 3,513 views

In this 'sister' video to Finishing the Foot of a Small Hollow form, Sam takes a hollow form that has been rough-turned and dried, and takes the viewer through the steps to its completion.

 

woodturning yew crouch vase
By: Robbiethewoodturner
June 28, 2015 · 22,353 views

Hi all here is my latest video on turning a yew vase i started to turning this vase on the 11 june and only finished turning it on the 19 and finally finished editing it today enjoy time is a bugger Al Furtado channel https://www.youtube.com/user/Alfurtado1 Here's a list of my latest videos wood-turning a wooden shot barrel https://www.youtube.com/watch?v JmXs0f0N7MI Woodturning a Coopers Barrel https://www.youtube.com/watch?v fIP_rV3NC94 Woodturning a clock https://www.youtube.com/watch?v J3AuDQ3rIy0 #WOODTURNING A PORTHOLE CLOCK https://www.youtube.com/watch?v ThYC2pvJIn4 Welcome to my wood turning channel, I have lots of free videos with wood turning tips and projects. enjoy. My wed Blog http://robbiethewoodturner.net

 

Acrylic filled voids in Mango vase by Al Furtado
By: Rebel Turner
June 23, 2015 · 3,164 views

The last piece of mango that I turned had a crotch and a hole in the pit Epoxy was a perfect solution to this beautiful l piece. Sorry I decided to shrink down this video to make it more bearable

 

#30 Mulberry Hollow form using a Pro Forme
By: Uncle Cys Woodshop
June 21, 2015 · 3,008 views

I recently purchased a Pro-Forme hollowing tool. It has quickly become my Favorite tool. SO here is a Mulberry Hollow form made using it. I bought just the head and made my own tool shaft and handle, still need to get a tool gate to give the tool more stability. Enjoy the show.

 

Woodturning Hallow Form and Vase Fallow up
By: Custom Chris
June 20, 2015 · 2,169 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Video 4 Small Vase
By: Harry’s Woodcraft
June 19, 2015 · 863 views

This project again was made from bits of wood taken from the scrap bin, in a local hardware store. I bought 3 of these pieces, 2 oak and 1 beach, I Paid 1.50 each for them, they were roughly 3 Foot Long, I cut them up and got three projects from each piece, 50p per project, That’s not bad. Music Paddy Kelly Liverpool, walking on the moon Silent Partner, Humidity Please like share and follow Thank you for watching Harry Watts The Little Garden Shed Workshop

 

Wood Turning - Turning Vessel Bottoms
By: Jason Van Duyn
June 16, 2015 · 266 views

Van Duyn Woodwork, Raleigh NC Call 919.760.0327 to talk about my #Urns for Sale or at www.vanduynwoodwork/sale/urns-for-sale. This is an informational video on turning the bottom of a vessel. Refer to other video @ https://www.youtube.com/watch?v B62D9wi81bU.

 

Woodturning a Crab Apple Bud Vase
By: Jerry Paul
June 14, 2015 · 18,725 views

I've been down with a bit of the flu for a few days, and before that I was on a job out of town, so I haven't gotten to turn, or make a video for a while. It felt good to be standing at the lathe, turning this little bud vase. If you wait until the end you'll get a glimpse of an upcoming project I plan to make a video of.

 

Woodturning Funky Vase
By: Custom Chris
June 12, 2015 · 143,517 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Naked Turner PurpleHeart Bud Vase
By: Erik Anderson
June 08, 2015 · 4,131 views

I turn a small Purple Heart Bud Vase

 

Madrona Vase and Bowl Follow Up
By: Paul Crabtree
June 07, 2015 · 1,042 views

A follow up on the previous video. The vase was much easier to prep for finishing than expected. The bowl had more tear out than I want to have but it sanded out fairly easy.

 

Vases & Madrona Burl
By: Paul Crabtree
June 06, 2015 · 365 views

Looking at vases that are in progress. Madrona Burl bowls and a vase ready to finish.

 

Your cheating Heart: Hollow form Part III
By: WYOMINGWOODTURNER
June 01, 2015 · 9,241 views

Sam completes the Hollow form series. Does he end with a Broken Heart? Watch this video and find out how his love affair with Walnut turns out.....

 

#15 A 'Simple' Olive Crotch Three Limbed Natural Edge Winged Vase
By: Yuval Lahav Woodturning
May 30, 2015 · 21,511 views

Making a winged vase from a multi limb crotch piece has been a dream, until now. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Josh Woodward - Cherry Josh Woodward - Honcho Graham From Birmingham Josh Woodward - River Went Dry All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Woodturning Holey Hallow Vase
By: Custom Chris
May 29, 2015 · 20,372 views

http://martelzexoticwoods.com Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Your Cheating Heart Part II--- Hollow form---Getting connected
By: WYOMINGWOODTURNER
May 29, 2015 · 6,022 views

Sam continues his 'fake' hollowing project by finishing the top and gluing it to the base.

 

Your Cheating Heart-Hollow form Part I
By: WYOMINGWOODTURNER
May 26, 2015 · 5,450 views

Sam finds an easier way to turn a 14 inch hollow form. Is this cheating? Watch part I of this 3 part series to find out.

 

#79 Woodturning a Camphor Hollow Form Part 2
By: Stephen Ogle
May 26, 2015 · 17,927 views

Part 2 of my Woodturning a Camphor Hollow Form series includes rough hollowing with my new hollowing bar and finding out I have a lot to learn about it's use. Cleaning up the interior and finish. John Williams Youtube channel. https://www.youtube.com/channel/UCxqLQhfL5quPYfQDMBQw2zQ Ron Brown woodturning supplies and reference material. http://www.ronbrownsbest.com

 

#78 Woodturning a Camphor Hollow Form Part 1
By: Stephen Ogle
May 25, 2015 · 38,521 views

Part 1 I begin shaping the outside of the 10 by 8 inch Camphor blank and begin the hollowing process using my new shop built hollowing bar and a captive rest from John Williams. Part 2 is the conclusion of this project. https://www.youtube.com/watch?v Oimdf1hn7y8 John Williams channel. https://www.youtube.com/channel/UCxqLQhfL5quPYfQDMBQw2zQ Ron Brown's website: www.ronbrownsbest.com

 

Wood Splinter Group demonstration meeting at GM Studios LLC
By: Gerard Merchant
May 24, 2015 · 37 views

Woodworking demonstration of turning hollow forms for The Wood Splinter Group meeting in March

 

The March WOOD SPLINTER GROUP MEETING IN ARIZONA
By: Gerard Merchant
May 23, 2015 · 42 views

Gerard Maurier Merchant and Robert Lee Hart, host the March meeting of the Wood Splinter Group of Arizona Robert is demonstrating a beetle invested mesquite burl hollow vessel. I ,Gerard Merchant , am demonstrating a 2 axis maple burl bowl, I call birth of a bowl.

 

2 Segmented Vase
By: Eric Percival
May 23, 2015 · 113 views

After cutting segments to make each ring and gluing them together as half rings, sanding out the error in angle and gluing the rings together this is my process of turning the rings into a finished piece. This is my second segmented project, the first was a two ring bracelet I made for the wood whisperer sponsored contest last year and as such I am still very new to segmented work. To say the least it is time consuming as well as challenging, but at the same time there is plenty of repetition in the steps which means it is quite doable.

 

Hollow Vessel Repair by Al Furtado
By: Rebel Turner
May 21, 2015 · 938 views

This was an approach I used to repair a Vessel after I blew out trough the bottom making the piece even better that originally planned.

 

Wormy Eucalyptus Vessel by Al Furtado
By: Rebel Turner
May 19, 2015 · 1,857 views

Wormy Eucalyptus Vessel After picking up some Eucalyptus wood and selecting mostly wormy stuff I was worried I had made a mistake and should have brought more solid rather than wormy. Now I am glad I chose the wormy

 

Lidded Vessel with Mahogany Finial by Al Furtado
By: Rebel Turner
May 18, 2015 · 2,934 views

This lidded Vessel really had all the signs of danger lurking around, I managed to turn it and made a Mahogany finial and Banyan lid to complete it Examine your piece know it's weaknesses and protect yourself

 

Woodturning Catalpa Vase
By: Custom Chris
May 10, 2015 · 63,358 views

Alberts Video https://www.youtube.com/watch?v 1kjPzuZGMAY For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Mothers Day Vase
By: Jerry Paul
May 09, 2015 · 192 views

I turned a bud vase for Mother's Day. I used my new (to me) freud bowl gouge on it, and under cut the lip.

 

A Southwest Inspired Segmented Turning - Feature Rings
By: Steve Lindsley
May 09, 2015 · 71,051 views

I have 150 hours invested in making this vessel with a lot of video clips so I've broken the project into three videos. In this first video I show how I made the feature rings. The main ring is a porthole ring with applied inlaid figures. The secondary feature ring at the top is a sunrise ring. My inspiration for both came from books and articles written by Malcomb Tibbetts a segmented turner in South Lake Tahoe, CA. I thank Malcomb for the inspiration. I hope you enjoy these videos. Questions and comments are always welcome.

 

A Southwest Inspired Segmented Turning - Assembly
By: Steve Lindsley
May 09, 2015 · 38,039 views

This is the second of three videos needed to complete large segmented turning. I give an overview of how the segments are cut and glued into rings, installing a floating disk bottom and stacking the rings. I hope you enjoy this video. Please look for the other two videos - Feature Rings and Finish Turning - that go along with with this video. Questions and comments are always welcome.

 

A Southwest Inspired Segmented Turning - Finish Turning
By: Steve Lindsley
May 09, 2015 · 32,249 views

In this final video we get the vessel on the lathe for finished turning. I also talk about the finish and show pictures of the completed project. It was a big project and took a lot of effort but I'm very pleased with the final result. I hope you enjoyed watching this video and the other videos that are part of this project. Questions and comments are always welcome.

 

Natural Edge Body Vase Al Furtado
By: Rebel Turner
May 08, 2015 · 1,472 views

This is the outcome of not knowing what to turn next and exploring possibilities.....Poor thing but it is different While turning this piece it struck me that I had a very different look to a vase leaving the body natural edge and refine both the top and bottom.

 

How to brake two fingers, (woven vase)
By: Rich McNatt
May 08, 2015 · 1,155 views

 

#9 Cypress Tall Vase
By: Yuval Lahav Woodturning
May 07, 2015 · 5,545 views

A piece of Cypress I discarded when I was cutting the Cypress log I've been given is getting a chance to become more then itself. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Ben McElroy - Oak Brett Saxon - Atavistic All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Woodturning at 54a #5 A bud vase(edited)
By: Keith Barrow
May 06, 2015 · 1,087 views

Description

 

Mango vase success by Al Furtado
By: Rebel Turner
May 05, 2015 · 6,118 views

The only piece of Mango that I had that was not rotten to the point that I couldn't turn. Lots of care went into maintaining sharp edges of this very soft bark.

 

#20 Hollow Form OOPS
By: Uncle Cys Woodshop
May 05, 2015 · 702 views

Watch how fast a catch with a 'too big for the project' tool can ruin the project.

 

#74 Woodturning a Spalted Pecan Vase Part 3
By: Stephen Ogle
April 28, 2015 · 14,302 views

Part 3 of my Spalted Pecan Vase includes surface preparation for finish and using Capt. Eddie's OB Shine Juice to finish this vase project.

 

#73 Woodturning a Spalted Pecan Vase Part 2
By: Stephen Ogle
April 27, 2015 · 6,955 views

Part 2 of the Spalted Pecan Vase Series includes shaping and hollowing the vase.

 

#72 Woodturning a Spalted ecan Vase Part 1
By: Stephen Ogle
April 27, 2015 · 11,657 views

This is the first part of three. I begin by roughing the blank. Cutting it into sections for the segments accent rings. Cutting gluing and truing segmented rings and finally for the initial glue up of the blank.

 

Spalted Sea Grape Vase Al Furtado
By: Rebel Turner
April 25, 2015 · 7,610 views

This has got to be the best and fastest spating wood I have ever seen and one that gives a super finish without much effort. In this video I make 3 carbide tools a hollowing round bar with a round cutter tool, a square bar with a square cutter tool and a square bar with a round cutter that made this turning a breeze My shop will never be without a carbide tool again. I got my cutters at Global tools the square cutters come in 10 pack about 1.70 each round cutter are at 9.00 ea. but you can get singles and they only have 11mm. Customer service unbelievable I contacted them and let them know that they had sent me square cutters instead of the rounded corners I ordered and they told me to keep the ones I had received and were shipping me the ones I had ordered. WOW I am a happy camper.

 

#20 Turning The Ugly Vase - Hollow Form - Wood Turning - Acolyte Turner
By: Tom Stratton
April 24, 2015 · 2,245 views

Turning The 'Ugly' Vase. Acolyte Turner In this video a turn a hollow form vase that can't ever be called pretty, but it was still good experience! My previous video can be seen here: https://youtu.be/9cH5irxaqSk Further projects, turnings and information can be found at http://tomturns.com Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where explicitly stated. All brand and product names are trademarks or registered trademarks of their respective companies and are hereby acknowledged. TAGS Acolyte Turner, Acolyte, Turner, Wood Turning, Turning, Wood, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Tip, Tom Stratton, Turning Tools, Carbide Tools, Tools, Bowl Gouge, Spindle Gouge, Roughing Gouge, Tool Sharpening, Sharpening, Vase, Spinning Top, Top, Bowl, Pen,

 

Woodturning - the spherical box and the vase box (#6 and 7)
By: Marc 's Oneway of turning
April 23, 2015 · 5,191 views

Two simple boxes; different in form but having a similar lid. Thanks for watching. Please like and share. Marc

 

Sea Grape vase 2 by Al Furtado
By: Rebel Turner
April 22, 2015 · 6,866 views

In this video I go a bit into how I choose the cut for a vase as well as demonstration of creating it. This piece of sea grape had 5 branches coming off the top that made it very interesting piece. At the end I show a time lapse prevue of other projects that were done this week. I hope it helps I know I said posting would be Wednesdays but I am trying to keep you all happy. Enjoy

 

Sea Grape Vase with a bit of Burl
By: Rebel Turner
April 20, 2015 · 10,748 views

Sea Grape Vase with a bit of Burl. If you have liked any of my earlier wood tunings I think this one will top it I had a piece of Sea Grape with the root ball on it. I cut it as close to the root as I could and turned what I think is the best looking piece I have done to date.

 

Vase Fail!!
By: Rich McNatt
April 18, 2015 · 362 views

 

Natural Edge Vase wide base by Al Furtado
By: Rebel Turner
April 13, 2015 · 674 views

I decided to also turn a wide body natural edge vase to compliment the rest of this series of unknown wood that has a very tight grain and somewhat a desirable finish.

 

98 Wood-turning a wattle tree crown Vase
By: Roger Webb
April 12, 2015 · 1,546,144 views

98 Turning a wattle tree crown Vase is a basic wood turning craft skills tutorial. By Roger Clyde Webb An Australian Inventors Workshop ;-) Thank you for watching! Please send an email to: info@pacifictooling.com and I will send you some information on our new * Lathe * and 6090, 6060 and 6012 (linear rail model) CNC routers. Our new company name is Pacific Tooling. Australian Inventor Roger Clyde Webb Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

Pioppo Cava
By: Jim Ballard
April 12, 2015 · 1,322 views

Natural Edge Vase from the Pioppo Cava Series. Made with Poplar.

 

Two turnings one video
By: Rebel Turner
April 09, 2015 · 4,910 views

I turned a beautiful natural edge unknown wood vase and also turned a pine bowl with a pedestal that really show some great wood grain patterns and finish. The pine looks beautiful but sanding was horrible as it kept gumming up my sanding disks.

 

Banyan tree vesel with Mahogany inlay
By: Rebel Turner
April 09, 2015 · 4,303 views

I turned a piece of Banyan and wanted to increase it's size so I made a solid mahogany ring and put a saved piece of banyan over the center to make it look like an inlay mahogany stripe. The banyan is just amazing and the mahogany just enhances it even further.

 

96 Woodturning a paperbark tree vase
By: Roger Webb
April 06, 2015 · 21,917 views

96 Woodturning a paperbark tree vase, a basic wood turning craft skills tutorial. By Roger Clyde Webb An Australian Inventors Workshop. Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

Natural Edge Banyan tree vase by Al Furtado
By: Rebel Turner
April 03, 2015 · 3,940 views

This is my first attempt making a natural edge vase and it came out rather well considering. Upon the finish sanding it I got a catch and it broke on me. I had to do some repairs.

 

Woodturning Knotty Hollow Form
By: Custom Chris
April 03, 2015 · 4,695 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Padauk / PurpleHeart vase
By: Mark Dolan
April 01, 2015 · 72 views

 

Jatoba Hollow Form
By: Daniel Vilarino
March 31, 2015 · 798 views

Hola/Hi! (Hay una versión en Español de este video) En este video hago una forma hueca, vasija de boca angosta en Jatoba (también conocido como Jatobá, Cerezo Brasilero, Algarrobo Criollo). ***In this video I make a Jatoba hollow form (Jatoba, aka: Jatobá, Brazilian Cherry).*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make comments, give it a 'like' and subscribe to my channel.*** Si por algún motivo no les gustó, o hay algo que se pud

 

crab apple bud vase (fixed sound issue)
By: Jerry Paul
March 29, 2015 · 846 views

This is an updated version of my first video, a bud vase/weed pot inspired by Sam 'WYOMINGWOODTURNER' Angelo. The music was drowning out my voice. I turned it down, and will work on the balance more for the next one. I appreciate the feedback.

 

#13 Spiral top Hollowform with a wing (Tutorial)
By: Uncle Cys Woodshop
March 22, 2015 · 6,439 views

My first tutorial video kinda long but I compressed and edited out a lot to get the time down but still maintain the info requested by others. Thank you Yuval for the idea of what to do next here it is my friend. Yuval posted a video of a Hollow form with a 'wing' of sorts and I loved the form so this one is similar to his (I think yours looks better Yuval) Go check out his video at https://www.youtube.com/watch?v KnTl7Pg2wuc

 

Open Segmented Hollow Vesel
By: Rebel Turner
March 21, 2015 · 27,751 views

I picked up a couple of pieces of Mahogany and decided to try to make something somewhat different and with a very different approach to the segments. This vessel evolved while I was turning it. Well I was looking and thinking it looked bottom heavy so I put it back on the lathe and turned a new base for it as you see on the thumbnail LOL

 

The Gorde Vase by BDG
By: Hidden Concept Insert
March 19, 2015 · 1,640 views

Basket Illusion- The gorde vase is made from oak. It has over 5500 beads and was made by BDG.

 

Walnut /maple vessel
By: Mark Dolan
March 08, 2015 · 38 views

 

Wood Turning: Small Spalted Maple Vessel
By: Stephen Zamecnik
March 07, 2015 · 447 views

This video is of a small, palm sized, spalted maple hollow vessel made out of a fallen limb from the yard. Hope you enjoy.

 

Basket Illusion oak vase by BDG
By: Hidden Concept Insert
March 03, 2015 · 780 views

Native American design, oak beaded vessel.

 

Slim vase with segment ring Wood turning by Al Furtado
By: Rebel Turner
March 02, 2015 · 4,275 views

Slim Melaleuca vase with segment ring I made this vase after having several attempts to get a good finish on the impossible Melaleuca wood. Really beautiful wood grain hard wood but almost impossible to get a good finish on it. this time I think I beat it. testing a new grind on my tool proved to be very effective too.

 

#9 Mulberry Hollow Form PT2 Carving the spiral.
By: Uncle Cys Woodshop
March 01, 2015 · 6,582 views

Taking the Hollow form to the next level. Thanks to Robbie Woodturner for the suggestion of using both Pierced and Ribbed formats in the carving.

 

#8 Mulberry Hollow Form
By: Uncle Cys Woodshop
February 27, 2015 · 802 views

First half of a Hollow form inspired by Master wood turner William Hunter (A true spiral master) And a shout out to my new subscribers, especially Carl Jacobson, Mike Waldt and Robbie Woodturner. Thanks guys. Also feel free to check out my Facebook page at https://www.facebook.com/pages/Cyrus-Fillmore/818750848156186?pnref lhc.recent

 

#65 Woodturning a 12' Maple Vase Part 3
By: Stephen Ogle
February 25, 2015 · 16,517 views

The last video in this series includes final shaping, hollowing the top section and Finish. Part 1 is at: https://www.youtube.com/watch?v d4P1bHN1730 Part 2 is at: https://www.youtube.com/watch?v uB_HawotUS0 Please send 'Will Work for Wood' signs to mbaid1224@gmail.com My Adjustable and Repeatable Segmenting Sled https://www.youtube.com/watch?v KCFgyYYjJeg My Drum Sander is the last half of https://www.youtube.com/watch?v ICehToDaObk&index 2&list PLGsnYf7PysCQVT7EYNfJCKXVZA8pWG0q8 My Steady Rest https://www.youtube.com/watch?v -YzyEq77Rt8

 

#64 Woodturning a 12 Maple Vase Part 2
By: Stephen Ogle
February 24, 2015 · 17,060 views

Part 2 in this series includes Segmented ring prep for glue up. Hollowing the bottom section and final glue up of the assembly. To watch Part 1 of this series: https://www.youtube.com/watch?v d4P1bHN1730 Part 3 is at: http://youtu.be/EVIFNSeTsQI

 

#63 Woodturning a 12 Maple Vase Part 1
By: Stephen Ogle
February 23, 2015 · 25,850 views

In this first of a three part series I will cut begin the prep work for a Maple Vase with a Maple and Mahogany feature ring. Part 2 is now at https://www.youtube.com/watch?v uB_HawotUS0&list UUDVVYzYJ-0Ye0kJAx8SQAEw Send 'Will Work for Wood' pics to mbaid1224@gmail.com How I built my Segmenting Sled https://www.youtube.com/watch?v KCFgyYYjJeg

 

Spinning Top Vase with a spinning Base
By: Rebel Turner
February 21, 2015 · 1,123 views

I made another spinning top vase but this time I mounted it on a spinning base. This is made out of Melaleuca wood or also known as paper bark tree fairly hard wood with lots of character when wet but is seems to dry up a bit more blend than I hoped for.

 

Woodturning a Mesquite Crotch Into a Flying Winged Vase
By: Kevin Felderhoff
February 20, 2015 · 60,576 views

Woodturning a Flying Winged Vase from a mesquite crotch. Kevin demonstrates in this short woodturning video the steps of woodturning a Flying Winged Vase made out of Mesquite Crouch with turquoise inlay. See more woodturnings at: http://www.kevinfelderhoff.com Music By: Bird Creek - Highway Wildflowers

 

Spinning Top Vase Wood turning by Al Furtado
By: Rebel Turner
February 16, 2015 · 1,290 views

It has to take a non wood turner to come up with such a crazy idea for a project. While speaking to my friend Lenny he said Al you like tops so why can't you make a vase in the shape of a top? well after giving it some thought here it is, set at an angle to give illusion of spinning.

 

Small necked oak vase Wood turning by Al Furtado
By: Rebel Turner
February 12, 2015 · 1,105 views

I turned a small neck oak hollow form vase from a cube I should have rounded it up on the band saw first. sharp corners are not your friend on a lathe. I finished it wit 6 coats of OB juice small fun project.

 

Hollow form vessel by Al Furtado
By: Rebel Turner
February 06, 2015 · 413 views

In this tutorial I show the steps taken to turn a small hollow vessel. I know this didn't break any records but it was complete in about 45 min with a surprisingly nice finish.The base was finished on my drill press. Music in the background is by Alexandre Bateiras a Portuguese guitarist playing a 12 string Portuguese guitar called a viola.

 

Elm Bowl and Maple Vase
By: Carl Jacobson
February 06, 2015 · 7,159 views

I turned these two pieces green several mounts ago, and this is the final step. This beautiful piece of Elm came form Oregon Burls.The Maple vase was one of my first project on my new Powermatic. Robbie's sanding pad video https://www.youtube.com/watch?v qss6tLxQXqw I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website

 

Woodturning a Red Oak funnel shape vase By Bostonwoodturning com 2015
By: Boston Woodturning
January 31, 2015 · 219 views

Woodturning a Red Oak Funnel shape vase

 

Woodturning - Padouk Bud Vase
By: Fabian's Tiny Workshop
January 30, 2015 · 4,295 views

Im turning a small Padouk Bud Vase on my drill-powered mini lathe

 

Naked Turner Acacia Vase
By: Erik Anderson
January 25, 2015 · 1,666 views

Reposting this acacia vase

 

Spalted Maple Vase and Box
By: Cody W
January 21, 2015 · 124 views

In this video I turn a vase and box from a piece of spalted maple. For the lid of the box I use walnut and a maple finial.

 

A vase from a log that just seemed unusable
By: Rebel Turner
January 15, 2015 · 811 views

Salvaging a log that seems to be beyond rescue turns out to be quite an interesting project with great results. That old pile of cut wood just might have a great use for it. There is always a way to use that lumber.

 

#57 Woodturning a Spalted Walnut Vase Part 2
By: Stephen Ogle
January 15, 2015 · 10,378 views

This is the second part of Woodturning a vase from spalted Walnut, dealing with the problems associated with spalted wood and trying out my new Carter and Son Roughing Gouge. For Part 1 click here: https://www.youtube.com/watch?v pxCGyNYpaj0

 

#56 Woodturning a Spalted Walnut Vase Part 1
By: Stephen Ogle
January 15, 2015 · 5,910 views

Woodturning a vase from spalted Walnut, dealing with the problems associated with spalted wood and trying out my new Carter and Son Roughing Gouge. For Part 2 click here: https://www.youtube.com/watch?v HSyvfYnUsX0

 

Turn a vase from a pine log
By: Rebel Turner
January 03, 2015 · 6,012 views

This pine vase is a good example of what you can get from a common pine log

 

woodturning natural edge Yew vase
By: Robbiethewoodturner
January 02, 2015 · 9,914 views

Hi all here is my latest video on how to turn a natural edge yew vase enjoy Welcome to my wood turning channel, I have lots of free videos with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood turned on a lathe. enjoy. Woodturning a turnip https://www.youtube.com/watch?v 2_sCASQq84E Woodturning a snowman https://www.youtube.com/watch?v zPhxkyLU5-I Woodturning a yew natural edge hollow Form https://www.youtube.com/watch?v XkokZ_CrDLM woodturning a spalted beech Bowl https://www.youtube.com/watch?v -khKVOjiC-k woodturning a pumpkin Box https://www.youtube.com/watch?v hFUCzA5aYOw woodturning a Butter Dish https://www.youtube.com/watch?v jY9gNj9-vOY

 

Hidden Concept Insert beaded vase part two
By: Hidden Concept Insert
January 01, 2015 · 56 views

This video is all about installing the actual Hidden Concept Insert into the vase. Detailed Plans can be downloaded FREE at http://hiddenconceptinsert.com

 

Hidden Concept Insert beaded vase part one
By: Hidden Concept Insert
January 01, 2015 · 123 views

Detailed build, determining the door size to just before installing the insert itself. Showing the simple cuts needed to install the Hidden Concept Insert. Download FREE detailed plans for this and other Hidden Concept Insert vases at http://hiddenconceptinsert.com

 

Hidden Concept Insert Beaded Vase
By: Hidden Concept Insert
January 01, 2015 · 56 views

The latest of the Hidden Concept Insert vases turned out great. There is no way you can see the hidden door in this one. Please subscribe to see this and future builds. For FREE detailed plans go to hiddenconceptinsert.com

 

Hidden Concept Insert Beaded Vase in 2 minutes
By: Hidden Concept Insert
December 26, 2014 · 121 views

Watch the build from beginning to end in just 2 minutes! It is almost impossible to see the door on this design. Be sure to subscribe to see the detailed build.

 

zig zag vase part three
By: Hidden Concept Insert
December 22, 2014 · 35 views

Putting on the final couple of rows and how to maintain the door.

 

Construyendo un jarrón #1 Torno Segmentados
By: Segmentados Romero
December 19, 2014 · 8,528 views

Construyendo un jarrón de segmentado, todos los procesos. contacto: segmentadosromero@gmail.com

 

Woodturning - Poplar Segmented Vase
By: Kevin Krull
December 16, 2014 · 13,135 views

For my latest video, I'll be turning a rather tall segmented vase from Poplar stock. The vase is composed of 185 pieces (23 - eight piece rings and a bottom ring plug). The turning features the use of a steady rest that I built for my previous lathe and adapted for use on my current lathe. The vase is finished with two applications of Danish oil finish and buffed with Tripoli compound and carnauba wax.

 

zig zag vase part two
By: Hidden Concept Insert
December 16, 2014 · 35 views

Installing a Hidden Concept Insert into the Zig Zag vase.

 

woodturning Yew hollow form follow up
By: Robbiethewoodturner
December 15, 2014 · 4,691 views

Hi all here is a woodturning Yew hollow form follow up Woodturning a yew natural edge hollow Form https://www.youtube.com/watch?v XkokZ_CrDLM woodturning a spalted beech Bowl https://www.youtube.com/watch?v -khKVOjiC-k woodturning a pumpkin Box https://www.youtube.com/watch?v hFUCzA5aYOw woodturning a Butter Dish https://www.youtube.com/watch?v jY9gNj9-vOY Welcome to my wood turning channel, I have lots of free videos with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project enjoy.

 

zig zag vase part one
By: Hidden Concept Insert
December 15, 2014 · 69 views

Detailed video of how to install a Hidden Concept Insert into this vase. It's part one of a three part series.

 

Woodturning a yew natural edge hollow Form
By: Robbiethewoodturner
December 12, 2014 · 45,123 views

Heres the link to Peters chanell https://www.youtube.com/channel/UCMCVIk6zuSQNsbhdcPhfiBA woodturning a spalted beech Bowl https://www.youtube.com/watch?v -khKVOjiC-k woodturning a pumpkin Box https://www.youtube.com/watch?v hFUCzA5aYOw woodturning a Butter Dish https://www.youtube.com/watch?v jY9gNj9-vOY Welcome to my wood turning channel, I have lots of free videos with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project enjoy.

 

Honey Locus live edge vase (?)
By: Rich McNatt
December 12, 2014 · 310 views

The last video of 2014 ( maybe) Enjoy! and Happy Holidays!

 

Wood turning, Building wooden patchwork vase with lathe
By: Georgios Paschalias
December 11, 2014 · 752 views

This is my video of how I make a wooden vase with lathe. There have been used 324 wooden pieces of poplar and beech.

 

zig zag vase
By: Hidden Concept Insert
December 11, 2014 · 105 views

Showing the door opening using a magnet. Preview to How to install a Hidden Concept Insert in zig zag vase.

 

Log to Gallery - Bradford Pear Natural Edge Deep Vessel
By: Chas Thornhill
December 08, 2014 · 104,412 views

In this video I turn a natural edge deep vessel using a very sketchy chunk of Bradford Pear. The wood was distressed with cracks and dry-rot. But like most pieces of wood, regardless of what it looked like in the beginning, with careful and patient turning it revealed a beautiful deep vessel. Please be careful and use common sense if you decide to chuck up a log with rot, cracks, voids, bark, or bugs. This is a very detailed turning video covering several turning sessions. I use time-lapse video to compress the project into a one hour presentation. All music in this video is licensed

 

Woodturning a Segmented slice Mahogany & Oak Vase Boston Woodturning
By: Boston Woodturning
December 06, 2014 · 108 views

Woodturning a Segmented slice Mahogany & Oak Vase Boston Woodturning

 

Mahogany & Oak Slice Vase Boston Woodturning 2014
By: Tommy G
December 04, 2014 · 122 views

Creating a Mahogany & Oak Slice Vase - Boston Woodturning Video 2014 visit http://www.BostonWoodturning.com to view full gallery of art.

 

A vase from the flood
By: Mauro il tornitore
November 28, 2014 · 1,418 views

The night between 10 and 11 November 2014 a terrible flood struck Chiavari, the town where I live in the North-West of Italy. In a couple of hours more than 200 mm of rain fell over this part of Liguria. Entella and Rupinaro, the two rivers of Chiavari, overflowed, causing great damages to shops and houses. If you want to see photos and videos of this flood here is a link: http://www.youreporter.it/video-foto/Alluvione_Chiavari_10-11_novembre The rivers took to the see a great amount of branches and trees. With one of this I made a vase on the lathe. In this video I show you how I made it and

 

part three of a Hidden Concept Insert bowl vase
By: Hidden Concept Insert
November 24, 2014 · 37 views

The Insert has been installed and it's time to finish the bowl/vase and show how to make the door open properly

 

part two of a Hidden Concept Insert bowl vase
By: Hidden Concept Insert
November 24, 2014 · 38 views

This video covers the heart of installing a Hidden Concept Insert. The insert itself.

 

Woodturning First Hallow Form
By: Custom Chris
November 21, 2014 · 31,551 views

Yew hallow form My first and hope more to come. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Hollow Vessel
By: DentonTurners
November 19, 2014 · 2,055 views

Dennis Ford walks the club through his methods and tips on turning a hollow form on the lathe. (You will note several holes drilled in the stock Dennis is turning. These were intended to give the viewer an eye into the piece as it is hollowed, however problems with camera angles precluded being able to see inside.) This was recorded at the October 2014 monthly club meeting of the Golden Triangle Wood turners in Denton Texas. We meet on the first Monday of each month at 7 pm in the Center for the Visual Arts located at the corner of Hickory and Bell streets in Denton. http://www.goldentrianglewoodturners.org

 

Wood Turning: Aussie Burl Hollow Vessel in 10 min HD: Time Lapse
By: Stephen Zamecnik
November 14, 2014 · 1,927 views

Description: this here is the first video I have ever made, so lets hope they get better with time. This is a hollow vessel turning of an Australian burl. A little on the long side and i'll try to shorten them up a bit. hope you enjoy

 

Wood Turning: Flaming Box Elder Hollow Vessel in 3 1/2 mins HD: Time Lapse
By: Stephen Zamecnik
November 14, 2014 · 5,490 views

description: the turning of a hollow wood vessel summed up in a few minutes. No steps skipped. Music composed by David Garrett

 

part one of a Hidden Concept Insert bowl vase
By: Hidden Concept Insert
November 14, 2014 · 169 views

The first part on how to install a Hidden Concept Insert into a bowl vase.

 

Woodturning - Segmented Pine Vase
By: Kevin Krull
November 05, 2014 · 12,688 views

For this video I'll be turning a simple, elegant vase from humble pine construction stakes.

 

Greek vase
By: Mauro il tornitore
October 31, 2014 · 1,290 views

A sort of Greek amphora (Hydria) made on the lathe

 

Adding a Lid to a Hollow Form: Woodturning
By: WYOMINGWOODTURNER
October 27, 2014 · 3,419 views

Sam Angelo ads a lid to a hollow for which transforms it into a burial urn.

 

NOVA Infinity - Lidded Vessel Contest
By: The Walnut Log Studio
October 27, 2014 · 604 views

#NOVAInfinityContest #NOVAInfinity submission video!! Quick entry for this challenge. I turn a lidded vessel from Walnut and a mystery wood.

 

Working on an Oak Burr Vase
By: Giorgio Romani Woodturning
October 22, 2014 · 122 views

GiorgioRomaniWoodturning - Workshop Live

 

NOVA Infinity – Lidded Vessel Contest
By: aesop717
October 22, 2014 · 3,922 views

#NOVAInfinityContest - Box Elder Burl and Ebony lidded box turned by artist Jason Clark on 10/21/2014. agoodturndaily.tumblr.com jclark58@gmail.com facebook.com/jclark58

 

Wooden Cork for a Turned Hollow form
By: WYOMINGWOODTURNER
October 21, 2014 · 2,414 views

Sam makes a wooden cork for a hollow form.

 

Turning a Hollow Wood Vessel
By: Devon Palmer
October 13, 2014 · 3,165 views

A quick demo of the process, tools and techniques I use in turning hollow vessels

 

Maple Hollow Form & Ebonized Finial Part 4
By: Gord Rock
October 09, 2014 · 1,073 views

Turning a Maple Hollow Form with a Threaded & Ebonized Finial - Part 4 of 4

 

Maple Hollow Form & Ebonized Finial Part 3
By: Gord Rock
October 09, 2014 · 875 views

Turning a Maple Hollow Form with a Threaded & Ebonized Finial - Part 3 of 4

 

Maple Hollow Form & Ebonized Finial Part 2
By: Gord Rock
October 09, 2014 · 867 views

Turning a Maple Hollow Form with a Threaded & Ebonized Finial - Part 2 of 4

 

Maple Hollow Form & Ebonized Finial Part 1
By: Gord Rock
October 09, 2014 · 1,517 views

Turning a Maple Hollow Form with a Threaded & Ebonized Finial - Part 1 of 4

 

76 Turning firewood into an 80 Vase
By: Roger Webb
October 09, 2014 · 93,620 views

76 Wood turning an oak Vase / bowl from firewood, Art Décor, a basic lathe tutorial By Australian Inventor Roger Clyde Webb. Please send an email to: info@pacifictooling.com and I will send you some information on our new * Lathe * and 6090, 6060 and 6012 (linear rail model) CNC routers. Our new company name is Pacific Tooling. Australian Inventor Roger Clyde Webb Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

September 24, 2014
By: Gerard Merchant
October 01, 2014 · 105 views

Gallery Book of wood turnings by Gerard Maurier Merchant Help support our cause. The creating of our own gallery/store/shop http://www.blurb.com/b/5598409-gallery-du-maurier-one http://www.gofundme.com/Gallery-du-Maurier

 

Yellowheart and Purpleheart vase
By: Hidden Concept Insert
September 19, 2014 · 38 views

Vase made using a Hidden Concept Insert.

 

Tall mahogany vase
By: Hidden Concept Insert
September 19, 2014 · 32 views

Graceful 16 inch tall Hidden Concept Insert vase.

 

product vase
By: Hidden Concept Insert
September 18, 2014 · 11 views

Vase opening and Jewelry box. Hidden Concept Insert

 

Woodturning a Pecan Vase Part 1
By: India indian
September 16, 2014 · 111 views

 

a Vase from Scraps Part 3
By: India indian
September 16, 2014 · 54 views

 

a Vase from Scraps Part 2
By: India indian
September 16, 2014 · 44 views

 

a Vase from Scraps Part 1
By: India indian
September 16, 2014 · 19 views

 

Vases Slide Show
By: John Williams
September 09, 2014 · 228 views

Shots of vases I have done over the past year or so

 

Hollow forms slide show
By: John Williams
September 09, 2014 · 289 views

These are hollow forms that were turned with the captive hollower featured in another video

 

vase opening
By: Hidden Concept Insert
September 09, 2014 · 18 views

Shows the yellow heart and purple heart vase opening

 

design a vase
By: Hidden Concept Insert
September 09, 2014 · 37 views

Video about how to design a vase to hold the Hidden Concept Insert

 

31# woodturning a yew vase
By: Robbiethewoodturner
September 06, 2014 · 71,338 views

Brendan's Channel https://www.youtube.com/user/baconsoda

 

Redbud Vase 2
By: John Williams
September 02, 2014 · 1,222 views

Finishing a Redbud vase with balloons and brass!

 

Vase Follow-up
By: Carl Jacobson
August 18, 2014 · 7,819 views

ChefwareKits https://www.chefwarekits.com/?tracking carl My Etsy store https://www.etsy.com/people/jacobsoncarl1?ref pr_profile Jon Peters https://www.youtube.com/user/jonpeters1000/featured Thank you for supporting free woodworking videos https://www.paypal.com/cgi-bin/webscr?cmd _s-xclick&hosted_button_id 7MQRX83KCLJBA My Q&A Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee Paul Crabtree http://toolsbycrabtree.com/ http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Hollow Form Vase
By: Carl Jacobson
August 15, 2014 · 31,178 views

13' By 7' Hollow form vase turned on the lathe. Paul Crabtree http://toolsbycrabtree.com/ RZ Mask: https://rzmask.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order I upload a new project video every Friday, and I'm live Monday on YT and Friday on Twitch. Check out my Twitch channel. https://www.twitch.tv/carljacobson I DO THIS FOR A LIVING, THANK YOU FOR YOUR SUPPORT! https://www.patreon.com/CarlJacobson

 

Inside-Out Vase Woodturning
By: Cip's Wood Chips
August 14, 2014 · 331,345 views

I made an inside-out Christmas ornament back in December. This time I want to try it again and made a small flower vase from a piece of yellow pine.

 

Woodturning Open Segment Hollow Form Vase
By: As Wood Turns
August 14, 2014 · 9,696 views

http://www.AsWoodTurns.com I appreciate the form of classic vases and decided to turn one using open segmentation. This vase is walnut and cherry. Maple would have contrasted more but I think the tonal shades of the cherry blend nicely with the walnut. It is about 9 inches high and about 5 inches in diameter. This vase has 17 segment rings made up of 265 segments: 7 solid rings at 12 segments; 10 open rings at 18 segments; and one center base plug. The vase is finished with sanding sealer and wipe on polyurethane. I used an 18 segment SegEasy template to position the open segments and a Stomper Pro to assist in positioning and gluing up the rings. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Redbud Vase
By: John Williams
August 13, 2014 · 2,933 views

rough turning a hollow form vase of redbud

 

Applying Copper Leaf to a Wood Vase Turned on the Lath
By: Roger Scott
August 11, 2014 · 31,239 views

This video gives you step by step instructions on how to apply metal leaf to an item made on the wood lathe.

 

Another Crayola vase
By: Mark Dolan
August 11, 2014 · 174 views

 

Crayola vase
By: Mark Dolan
August 09, 2014 · 236 views

 

The Tulip Vase
By: Kyle Toth
July 24, 2014 · 10,216 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4fr5sKRorFuq479M7Kig?view_as subscriber New Video of the last vase I turned. Made in Torrey Pine and Jacoba. To Keep up with my work through out the week check out the links below.... www.woodbykyletoth.com m.facebook.com/woodbytoth instagram.com/tothtoth mobile.twitter.com/woodbytoth

 

2014
By: Gerard Merchant
July 15, 2014 · 94 views

Creating art through turning. Art my mind likes, through woodworking. Click here https://www.etsy.com/shop/GMStudiosPens

 

#42 Woodturning a Spalted Oak Vase Part 2
By: Stephen Ogle
July 06, 2014 · 210,208 views

Turning an 11 inch spalted vase from a piece of oak rescued from a tree service. Part 2 is here: https://www.youtube.com/watch?v ZUwcxuG8nHM Robbiethewoodturner is at: https://www.youtube.com/user/Robbiethewoodturner

 

#41 Woodturning a Spalted Oak Vase Part 1
By: Stephen Ogle
July 06, 2014 · 564,158 views

Turning an 11 inch spalted vase from a piece of oak rescued from a tree service. Part 2 is here: http://youtu.be/h9DuVzBrFLI Robbiethewoodturner is at: https://www.youtube.com/user/Robbiethewoodturner

 

Transforming An Old Fence Post Into A Rustic Fence Post Vase
By: As Wood Turns
July 03, 2014 · 9,097 views

http://www.AsWoodTurns.com I've invited Russ Coker from a local club to turn one of his favorite projects, a fence post vase. He salvages old fence posts from Wyoming that are mostly cedar and turns them into a vase. The wood is weathered and very, very irregular. His process is: 1. Mount the wood between centers. 2. Evaluate the wood for features and where to turn. 3. Glue down any loose wood with CA. 4. Turn a vase neck. 5. Turn a dovetail mounting tenon and remount the timber to a 4 jaw chuck. 6. Drill the top. 7. Flare the hole and form a neck. 8. Sand the turned areas. 9. Apply a solution

 

Naked Turner Turns 3 Axis Footed and Lidded Vessel
By: Erik Anderson
June 29, 2014 · 2,178 views

This was inspired by RobbieTheWoodTurner and his three axis turnings.

 

BobAnastasis1
By: Stateline Woodturners
June 16, 2014 · 93 views

Bob Anastasis, a member of the StatelineWoodturners club, demonstrates turning a two part hollow form.

 

Woodturning finale form by Marcel van Berkel
By: Marcel van Berkel
June 16, 2014 · 1,249 views

Photoshoot of the making of my signature open form in 'finale style

 

Making A Segmented Vessel With Diamond Feature Ring Part 8 of 9
By: Gord Rock
June 15, 2014 · 10,648 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #8 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 9 of 9
By: Gord Rock
June 15, 2014 · 9,911 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #9 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 7 of 9
By: Gord Rock
June 15, 2014 · 10,966 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #7 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 5 of 9
By: Gord Rock
June 15, 2014 · 26,267 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #5 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 6 of 9
By: Gord Rock
June 15, 2014 · 14,332 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #6 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 4 of 9
By: Gord Rock
June 15, 2014 · 13,497 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #4 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 3 of 9
By: Gord Rock
June 15, 2014 · 13,447 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #3 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 2 of 9
By: Gord Rock
June 15, 2014 · 17,767 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #2 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 1 of 9
By: Gord Rock
June 15, 2014 · 30,901 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #1 of 9 Episodes.

 

Hollow form vase with segmented rings
By: Rebel Turner
June 06, 2014 · 1,643 views

Vase from log with segment rings added to it

 

woodturning a natural edge vase
By: Robbiethewoodturner
May 29, 2014 · 47,207 views

Here is the link to peters https://www.youtube.com/user/PeteTGIF http://robbiethewoodturner.net/ This video was produced and made by Robbie power Copyright All Rights Reserved http://youtu.be/rUojrLturds

 

Woodturning - Pin Oak Hollow Form
By: Kevin Krull
May 22, 2014 · 7,016 views

After recently completing my first hollow form, I decided to tackle another one. This time I'm using Pin Oak (of the White Oak family). For the finish, I applied two applications of Danish Oil Finish but didn't buff the cured finish for a more natural look.

 

Woodturning A Natural Edge Bud Vase For Mother's Day
By: As Wood Turns
May 16, 2014 · 4,400 views

http://www.AsWoodTurns.com I needed to make a bud vase to go with the flower I made for Mother's Day. I chose a wet piece of gum wood and shifted the turning axis to include a natural bark edge. I finished this little vase with walnut oil. Despite the off-axis turning, this is still an easy woodturning project. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Web: http://www.AsWoodTurns.com FB: http://www.Facebook.com/ AsWoodTurns

 

Making a Segmented Vase 1
By: Mick Brown
May 15, 2014 · 14,730 views

 

50 Turning a Bud Vase by Roger Clyde Webb
By: Roger Webb
May 12, 2014 · 20,606 views

50 A basic tutorial of wood turning, machining demonstration of a bud vase by Australian Inventor Roger Clyde Webb An Australian Inventors Workshop Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

How To Make King V
By: Paul Crabtree
May 08, 2014 · 421 views

Describing the process of making a 19' vase.

 

#31 Woodturning a Walnut Hollow Form
By: Stephen Ogle
May 01, 2014 · 77,870 views

Dedicated to my 'POP' I am turning a walnut log into a Hollow Form using my new shopmade hollowing tool.

 

OLD TEAPOT Media
By: Francesco Dibari
April 27, 2014 · 101 views

 

Natural Edge Vase Part 3a
By: Keith Worswick
April 22, 2014 · 326 views

This video is about Natural Edge Vase Part 3a

 

Woodturning - White Ash Hollow Form - Take 2!!!
By: Kevin Krull
April 18, 2014 · 3,826 views

During my first attempt to turn a hollow form I blew through the side of the piece. This time, armed with the insight gained from my first attempt, I will tackle the hollow form again.

 

Maple Vessel with Finial - Part 1
By: Cip's Wood Chips
April 17, 2014 · 3,065 views

I made this box from a piece of Maple It has been drying for 6 to 8 years. The finial is made from ebony and is featured on a separate video.

 

Maple Vessel with Finial Part 2
By: Cip's Wood Chips
April 17, 2014 · 1,716 views

This video is part 2.

 

Woodturning Log to Vase on the Wood Lathe
By: ThisWoodwork
April 11, 2014 · 132,766 views

Turning a small wooden vase, then using the tablesaw I angle the top, just to do something a little different. Let me know what you think in the comments section below! For more images of this wood vase, see here: http://thiswoodwork.com/turning-a-log-into-a-vase-on-the-wood-lathe/ -------------------------------------------------------------------- My Social Links: Vlog Channel: http://www.youtube.com/user/ThisWoodworkVlog Facebook: http://www.facebook.com/thiswoodwork Twitter: https://twitter.com/ThisWoodwork Google : https://plus.google.com/ Thiswoodwork -------------------------------------------------------------------- Music courtesy of the Youtube Audio Library: 'Old Friend' and 'Daisy Dukes' -------------------------------------------------------------------- how to make a wooden vase on the woodturning lathe wood turning diy free homemade tricks tips diy easy woodworking projects project thiswoodwork alex harris woodturning a vase

 

Woodturning - White Ash Hollow Form - Take 1?
By: Kevin Krull
April 10, 2014 · 7,025 views

For today's project, I'll be attempting to turn my first hollow form from 'green' White Ash. I'll be using bowl gouges and bowl scrapers to do the hollowing.

 

NEFWA February 2014 - Disc Vase
By: North East Florida Woodturners Association
March 28, 2014 · 2,149 views

Disc Vase Demonstration of turning a Disc Vase by Roy Yarger at the February 2014 meeting of the Northeast Florida Woodturners Association.

 

43 A Spalted Timber Vase Part 2 Basic tutorial of Wood Turning Blooper
By: Roger Webb
March 27, 2014 · 585,061 views

A basic tutorial of wood turning a spalted timber vase part 2 and a catastrophic failure into a segment bowl blooper Please send an email to: info@pacifictooling.com and I will send you some information on our new * Lathe * and 6090, 6060 and 6012 (linear rail model) CNC routers. Our new company name is Pacific Tooling. Australian Inventor Roger Clyde Webb Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

42 A Spalted Timber Vase Part 1 A Basic tutorial of Wood Turning
By: Roger Webb
March 27, 2014 · 2,988,688 views

A Basic tutorial of Wood Turning A Spalted Timber Vase Part 1 Please send an email to: info@pacifictooling.com and I will send you some information on our new * Lathe * and 6090, 6060 and 6012 (linear rail model) CNC routers. Our new company name is Pacific Tooling. Australian Inventor Roger Clyde Webb Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

Natural Edge Vase part2
By: Keith Worswick
March 27, 2014 · 387 views

This video is about Natural Edge Vase part2

 

Stuart sharing his signature hollow twist forms ...
By: Stuart Mortimer
March 23, 2014 · 12,714 views

Stuart Mortimer sharing his signature pieces and some of his latest projects including his semi precious eggs.

 

Vasetto olivo
By: Mauro il tornitore
March 20, 2014 · 1,147 views

Con l'avanzo dell'uovo ho realizzato un semplice vasetto With the remnant olive log I realized a simple jar

 

Woodturning Hollow Vessel - Segmented For Safety
By: As Wood Turns
February 28, 2014 · 5,040 views

http://www.AsWoodTurns.com Hollow vessels (Hollow Forms) are fascinating. How do you go about removing all that wood through that tiny hole in the top. Once you understand how, then you also begin to understand the risks involved especially for larger projects. They then require specialized tools such as bent scrapers. Even then a high skill level is required to avoid serious catches that could destroy the project. A catch could also do physical damage to the woodturner's elbow or shoulder. I also like segmented vessels, they have a different look and appeal. So why not combine segmented and h

 

Jarrah Vase
By: Neil Turner Artisan
February 06, 2014 · 1,094 views

Neil Turner showing the creative process of turning, drawing,carving and sanding a jarrah vase with fire form.......

 

#21 Woodturning a Pecan Vase Part 2 Surviving a Catastrophe and Finish
By: Stephen Ogle
February 03, 2014 · 41,814 views

Part 2 of the Pecan Vase where a catastrophic failure leads to a large repair job.

 

#20 Woodturning a Pecan Vase Part 1 Designed by Mother Nature
By: Stephen Ogle
February 03, 2014 · 88,687 views

The first of two videos showing my methods for turning a vase. This one from Pecan which was bug infested and has very interesting hole patterns.

 

PANDORA
By: Francesco Dibari
January 28, 2014 · 58 views

 

Wood Turning With Naked Turner%2C Pretty Wood Vessel
By: Erik Anderson
January 26, 2014 · 1,025 views

 

HK 58A Hollowing a Small Vase
By: Paul Crabtree
January 26, 2014 · 877 views

A curious nob on a half round of Big Leaf Maple is examined, determined it would make a nice bowl but ended up a beautiful vase. A step by step class from start to finish. http://toolsbycrabtree.com

 

Turning a branch burl.
By: James Walt
January 22, 2014 · 242 views

I turn a burl given to me by Ray Powers of Trenton Tree service.

 

woodturning wooden vessel
By: Цветимир Иванов
December 28, 2013 · 423 views

 

Wood Turning - Vase of Flowers [part 2]
By: 101smallface
December 19, 2013 · 2,051 views

Turning flowers to put in to the vase. The blank is about 45x45x60mm (2x2x2.5'). Original idea from Carl Jacobson https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Music by Kevin Macleod

 

another small wood vase
By: Fabian's Tiny Workshop
December 19, 2013 · 348,199 views

make a small wood vase - small woodworking project Music: 'Funkorama' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ Support me on Patreon: https://www.patreon.com/FabiansTinyWorkshop

 

Wood Turning - Vase of Flowers [part 1]
By: 101smallface
November 20, 2013 · 1,669 views

In this video I turn a vase out of Totara. Part two will show how to turn the flowers. Stay tuned for part 2!! Music - Kevin MacLeod

 

cherry vase 3
By: r crews
November 10, 2013 · 49 views

 

cherry vase 2
By: r crews
November 10, 2013 · 41 views

 

Cherry vase part 1
By: r crews
November 10, 2013 · 132 views

 

Wood Turning Wall Vase
By: Carl Jacobson
November 08, 2013 · 7,791 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

#06 Woodturning a Vase from Scraps Part 3
By: Stephen Ogle
November 03, 2013 · 111,832 views

The last of this three part series where I reassemble the vase, Prep and Finish.

 

#05 Woodturning a Vase from Scraps Part 2
By: Stephen Ogle
October 31, 2013 · 244,873 views

In this episode I put a random pattern to the blank and turn the outside of the vase.

 

#04 Woodturning a Vase from Scraps Part 1
By: Stephen Ogle
October 29, 2013 · 273,625 views

This video shows a method for turning some of your shop scraps into a large turning blank I will later turn hopefully into a fairly large vase.

 

Woodturning Hollow Vessel
By: Carl Jacobson
July 28, 2013 · 21,033 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. I turned a Apple wood vessel using a set of David Ellsworth hollowing tools. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Hollowing a Wood Vessel
By: Marc Hathaway
July 28, 2013 · 139 views

My process for hollowing wood vessels.

 

Woodturning Eccentric Bud Vase
By: Carl Jacobson
June 01, 2013 · 24,941 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Allan suggested I turn a eccentric/off center bud vase. I make this one out of Maple - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Bud Vase
By: Bill Thomas
May 29, 2013 · 556 views

A Simple Little Bud Vase

 

The Vision â ” spalted maple wood vase with a shaped opening
By: Jake Gevorgian
May 15, 2013 · 1,855 views

via YouTube Capture

 

Woodturning Bud Vases For Mothers Day
By: As Wood Turns
May 03, 2013 · 11,572 views

http://www.AsWoodTurns.com Two brothers and I met recently for a woodturning 'Turnover'. They wanted some supervised practice and training. We started with a project agenda to give them several woodturning experiences. However, our well planned agenda was interrupted when our wives called back from visiting Saturday's Market. They had seen bud vases and each wanted one for Mother's Day. So we switched gears to make a bud vase. It was a good experience; they turned out very nice. Then then agenda took another turn. Bud vases for daughters and daughters in law for Mother's Day. So we spent the

 

Alan Carter Floating Vessel Pt. 4
By: Bill P
April 28, 2013 · 245 views

Alan Carter Floating Vessel Pt. 4

 

Alan Carter Floating Vessel
By: Bill P
April 28, 2013 · 111 views

Alan Carter Floating Vessel

 

Alan Carter Floating Vessel Pt. 2
By: Bill P
April 28, 2013 · 100 views

Alan Carter Floating Vessel Pt. 2

 

Alan Carter Floating Vessel Pt. 3
By: Bill P
April 28, 2013 · 128 views

Alan Carter Floating Vessel Pt. 3

 

Spalted Ash Vase
By: Bill Thomas
April 12, 2013 · 563 views

Made out of spalted Ash. A difficult wood to turn because of all the grain imperfection

 

Turnings. A wood adventure
By: Gerard Merchant
April 08, 2013 · 163 views

turning on a lathe, hollow vessels and forms from domestic and exotic wood found locally and abroad, inlays and decorative finishes, for truly breathe taking experience

 

Frank's Hollow Vessel with a Natural Edge
By: Jim Ballard
March 31, 2013 · 2,749 views

Bradford Pear Hollow Vessel with a Natural Edge in the style of Kaze

 

Hollow Vessel # 2325 Video White Birch
By: Eugen Schlaak
March 29, 2013 · 1,018 views

This presentation shows my procedures used transforming a very odd shaped White Birch crotch into a Hollow Vessel

 

From Log to Vase in 240 Seconds
By: Devon Palmer
March 12, 2013 · 269,370 views

My first time-lapse video turning a 8' bradford pear log into a endgrain hollowed vase. Original credit to Jimmy Clewes for turning and demo'ing these. Total time, 35 minutes. Pardon my odd use of the toolrest (working off the ends); couldn't find my short tool rest. Sharp tools and light cuts were key (especially when breaking the rules and cutting uphill.) For more info, visit my site/blog at http://www.devonpalmer.com The song is 'Terra De Ningruem' from Sabrina Malherios' album 'Equlibira'

 

Turning Of Hollow Vessel # 2172 'Egg Cetera' (Revision 1)
By: Eugen Schlaak
March 08, 2013 · 2,590 views

This is a presentation about turning a large vessel on a woodturning lathe. The wood was harvested here in Niagara Falls Ontario Canada.

 

Turning of Hollow Vessel # 1830 Japanese Yew Root
By: Eugen Schlaak
March 07, 2013 · 1,370 views

This slide/video presentation explains the turning of one of my earliest large Hollow vessels made from the root of a Japanese Yew Tree in 2007. I have dug out many Japanese Yew roots before, but this was the worst. It had grown in our neighborhood for more than 60 years and the landscaper left me a stump of about 8 feet tall

 

Turning Hollow Vessel # 2344 from a Japanese Yew Root
By: Eugen Schlaak
March 05, 2013 · 2,117 views

This 15 minute Video/Slide presentation illustrates the harvesting of a Japanese Yew root and processing of this material for use on a woodturning lathe . The detailed photos illustrate the use of various modern woodturning tools and techniques. Enjoy and I would appreciate your comments . Thank you .

 

Natural Edge Hollow Vessel
By: Jim Ballard
February 26, 2013 · 485 views

Birch Hollow Vessel with a Natural edge

 

Easy Method of Glueing Segments into a Ring for a Segmented Vessel
By: TexasWoodturner
January 23, 2013 · 996 views

This video shows an easy method of gluing together the segments for a ring for a segmented bowl that doesn't require use of clamps of any type. The glue used is TiteBond Original, which has a fast tack and setup time.

 

Part 1 of 5, Hollow form Design:Woodturning
By: WYOMINGWOODTURNER
December 23, 2012 · 6,670 views

As an introduction to Hollow form turning, Sam discusses design and form. This will be the first part in a series on tools used----and how to turn a hollow form.

 

Wood turning Walnut small vase
By: Ijinxx Wood
November 19, 2012 · 587 views

Black walnut -turning in north Carolina

 

How to make a Segmented Maple Vase Lining Part 2
By: Ridgeway Woodcraft
November 18, 2012 · 7,572 views

This movie shows step by step instructions on how I made the maple segmented lining for the purpleheart and maple vase I made in part 1 on a metalworking lathe. This is part 2 of 2. The backing tune will be available for download soon, along with many others at: www.naughtysmarties.com

 

How to make a Segmented Lined Purpleheart Vase Part 1
By: Ridgeway Woodcraft
November 18, 2012 · 12,540 views

This movie shows step by step instructions on how I made a segmented vase from purpleheart and maple on a metalworking lathe. This is part 1 of 2. The backing tune will be available for download soon, along with many others at: www.naughtysmarties.com

 

Woodturning A Segmented Vase / Vessel pt.4
By: Mark Hammond
November 11, 2012 · 19,263 views

Turning a wood segmented vase / vessel pt 4.

 

Woodturning A Segmented Vase / Vessel pt. 3
By: Mark Hammond
November 03, 2012 · 23,954 views

Turning a wood segmented vase pt 3. The wood is maple and rosewood.

 

Woodturning A Segmented Vase / Vessel pt. 2
By: Mark Hammond
October 14, 2012 · 12,019 views

Turning a wood segmented vase pt 2. The wood is maple and rosewood.

 

A Short Vase With a Long Neck - Woodturning
By: Jake Gevorgian
October 10, 2012 · 112,895 views

Turning a hollow form from the bottom, then the opening. This way it is lightweight.

 

Woodturning A Segmented Vase / Vessel pt. 1
By: Mark Hammond
October 08, 2012 · 9,774 views

Turning a wood segmented vase pt 1. The wood is maple and rosewood. Sorry about the late start but I was a little into the project before I decided to make a video. Please subscribe to get updates on when part 2 is up.

 

Wood turning natural edge vessel
By: Ijinxx Wood
October 07, 2012 · 235 views

Wood turning in North Carolina

 

Turning the Torus Form
By: Chas Thornhill
October 06, 2012 · 266,588 views

In this video, I show how I use the ends of logs I have cut down for bowls to make artistic hollow forms in the shape of a torus. These forms are very interesting, and while they don't necessarily have a functional purpose, they, like almost any hollow form turning are visually intriguing. Turning the torus form is also a way to improve my skills and patience.

 

Lyle on Woodturning Tool Control for Hollow Forms
By: Lyle Jamieson
October 03, 2012 · 4,385 views

Lyle Jamieson stresses tool control techniques to prevent vibration, to hollow deeper and gain accessiblity in hollow form woodturning.

 

Lyle on Turning the Nub inside Hollow Forms
By: Lyle Jamieson
October 03, 2012 · 3,595 views

Lyle Jamieson stresses techniques to finish the bottom inside of hollow vessels.

 

Lyle on Hollow Form Woodturning with a Small Entry Hole
By: Lyle Jamieson
October 03, 2012 · 19,292 views

Lyle Jamieson demonstrates advanced techniques for hollowing any shape vessels through small mouth openings. He demonstrates different techniques to under cut shoulders and difficult shapes.

 

Lyle on Boring Bar Capabilities for Woodturning Hollow Forms
By: Lyle Jamieson
October 03, 2012 · 4,412 views

Lyle Jamieson demonstrates techniques for reaching inside of a hollow form vessel. There are 3 cutting configurations, as well as, a swivel assembly to turn any shaped hollow form vessel.

 

Lyle on Cleaning Up Tool Marks Inside Hollow Form Woodturnings.mp4
By: Lyle Jamieson
October 01, 2012 · 2,963 views

Lyle Jamieson stresses a smooth inside shape of hollow vessels showing tool control with a boring bar and laser measuring.

 

Lyle on Turning the Bottom of Hollow Form.mp4
By: Lyle Jamieson
October 01, 2012 · 1,649 views

Lyle Jamieson stresses tool control to make clean cuts on the outside shape of end grain hollow form vessels.

 

Lyle on Boring Bar Limits for Hollow Form Turning.mp4
By: Lyle Jamieson
October 01, 2012 · 1,454 views

Lyle Jamieson stresses capabilities under variable conditions for hollow form woodturning.

 

Blending Finial To Hollow Form
By: charlieb1946
September 30, 2012 · 785 views

Special thanks to Richard Scott and his videographer's experience in capturing the videos from three different cameras while I was doing the turning. Turning miniatures is a lot of fun and not that hard to do. Blending a finial to a hollow form is probably the trickiest thing to do, but really not that difficult once you've worked out a method. This is ONE method that works for me. The illustrated How To - Step By Step and more about blending a finial to a hollow form is here: http://web.hypersurf.com/ charlie2/Turning/Miniatures/HFsWfinials/BlendedFinialToHF/BLENDINGfinialToHF1.html A bunch more on turning miniatures is here: http://web.hypersurf.com/ charlie2/Turning/Miniatures/Miniatures1.html Here's a link to a web page that has the illustrated Step By Step How To you can download, print and take to your lathe. http://tinyurl.com/9jcqcqt If you have questions or suggestions for improving this video please e-mail them to me - charlileb@accesscom.com

 

Phil Lackey demonstrates piercing thin walled vessels 2012
By: Rocky Mountain Woodturners
September 17, 2012 · 13,355 views

Phil Lackey demonstrates turning thin walled vessels and then decorating them with piercings to the Rocky Mountain Woodturners.

 

Wood turning cedar& cypress vase
By: Ijinxx Wood
September 03, 2012 · 1,026 views

North Carolina turning

 

Fire Vase
By: Levier Fine writing Instruments
July 16, 2012 · 2,459 views

Fire Wood Vase Made From Maple Wood Here at Levier we take care of the Environment; During our Daily drive by Canada we saw a tree that was been cut, We took as much of the wood in order to make One of a Kind Projects

 

WGNC Demo: Chris Boerner on hollow forms
By: weekendturner.com
July 13, 2012 · 73,797 views

WGNC Vice President Chris Boerner gives a demo on hollow form shape and technique at the July 12, 2012 meeting of the Woodturnersguild.com of North Carolina

 

Minis 5 - Miniature Hollow Form
By: charlieb1946
July 02, 2012 · 2,082 views

While it would be extremely difficult to turn one of David Ellsworth's hollow forms through an almost impossibly small opening, you CAN turn nice miniature hollow forms. And you can do it with inexpensive tools - a 1/4' bench chisel used as a thin bedan along with a little 'hook tool' YOU can make out of a 1/4' diameter steel rod. You still need a chuck of course ; ) For a Step By Step illustration of the procedure - that you can download, print and take with you to the lathe - go here http://web.hypersurf.com/ charlie2/Turning/Miniatures/Miniatures1.html If you have any questions you can post them here or e-mail them to me at charlieb@accesscom.co

 

Anforetta per Adriana con commento step by step
By: Livio Maritati
June 03, 2012 · 1,530 views

Tornitura passo passo di un'anforetta in legno di acero grigio finita con decorazione artistica

 

Captured turning set up
By: Gerard Merchant
May 31, 2012 · 38 views

handmade captured rest, handmade captured tool rest on a laguna lathe

 

Polishing The Diamond Cut Wooden Vase
By: Jake Gevorgian
May 25, 2012 · 1,029 views

Presentation is sponsored by Palo Arte Woodworks in Los Angeles - http://www.paloarte.com

 

Carving The Opening Of The Vase
By: Jake Gevorgian
May 24, 2012 · 1,095 views

Presentation is sponsored by Palo Arte Woodworks in Los Angeles - http://www.paloarte.com This is a signature series wood vase that I've started lately. I call it a diamond cut vase. Because the opening is a diamond shape. I'll shoot a short video of the finished work. Here is a picture of a similar vase I made few days ago http://www.aawforum.org/photopost/showphoto.php?photo 10905&ppuser 26569

 

Woodturning A Segmented Vase
By: Mark Hammond
May 17, 2012 · 110,341 views

This segmented vase starts out as two pieces. Just like turning two wood segmented bowls and joining them together.

 

'L'arte della Tornitura' di Antonio De Gaetano (1 fase-lavorazione ciocco di Erica)
By: Anto Dega Wood
May 07, 2012 · 891 views

musica : Ludovico einaudi - Una mattina

 

Making a Large Segmented Vase
By: Mick Brown
May 02, 2012 · 3,587 views

A brief insight into making a Segmented Vase

 

Turning a Bud Vase
By: ThisWoodwork
April 09, 2012 · 35,450 views

So it is a little late for mothers day in th UK but I did make this bud vase for mothers day. Another quick gift project made out of wood for may occasions. In this video I show you how to turn a wooden bud vase on the woodturning lathe. This is one of my last videos featuring my mini lathe. For this turning I use a bowl gouge, roughing gouge and spindle gouge. Check out my website: http://www.thiswoodwork.com thiswoodwork alex harris teenwoodworker woodworking woodworker woodturning project projects howto make wooden turn woodturner how to turning lathe bud vase box

 

Olivewood Sphere Vessel -- Full Version
By: Jake Gevorgian
April 09, 2012 · 5,046 views

Woodturning with Axe http://www.youtube.com/watch?v OYODmS6Jt2Q

 

Olivewood Sphere Vessel â ” Short Version
By: Jake Gevorgian
April 08, 2012 · 445 views

Short version is made with iMovie in iPhone.

 

Segmented WoodTurning Vase
By: archturn
March 29, 2012 · 1,529 views

For more info visit http://www.archturnings.com This is what happens when I have too much time on my hands (slow January 2012). I saw so many fine segmented turnings on youtube that I thought I would try one myself. It involved more work that I expected. Not sure what I will do with it.

 

Hollow turned wood vessel creations.
By: Gerard Merchant
March 21, 2012 · 48 views

Gerard and Robert's creations at GM Studios LLC

 

Jimmy Clewes- Natural Edge Vase
By: Nor-Cal Woodturners
March 20, 2012 · 10,558 views

Still photos of Jimmy Clewes demonstrating how to make a natural edged end grain vase at Nor-Cal Woodturners in Sacramento, California.

 

Woodturning a Small Wood Vase
By: TheTableOfKnowledge
March 20, 2012 · 6,470 views

How I turn a small walnut mini-vase. (could be a hamster urn) I don't have a hollowing tool so I had to make it in two halves. Grain matching is a must. The final product is very light in weight. Finished with water based Poly. WOODTURNING!!! EXTREEEEEME!! Important: Please follow all your manufacturers guidelines for safe use of your machine. Always wear safety equipment when working with wood and power tools. Keep your body and clothes away from any moving parts on your equipment.

 

cherry vessel.wmv
By: Tom F
March 17, 2012 · 33,935 views

sorry about the chipmunks!

 

How to make segmented vases
By: Ridgeway Woodcraft
March 14, 2012 · 6,215 views

Step by step run through of the making of a matching pair of segmented vases. The wood is primarily yew, but there is also layers of oak, mahogany and purpleheart too. The vases each stand aroud 165mm high and are 90mm in diameter at the widest point.

 

Making of the Long Neck Vase - Woodturning
By: Jake Gevorgian
March 07, 2012 · 4,862 views

In this video I'm trying to make a long neck vase that is hollow at most parts.

 

Turning a Small Cedar Basket (or Vase)
By: Chas Thornhill
March 03, 2012 · 28,440 views

In this video I turn an endgrain basket out of aromatic red cedar. This is a very simple project that looks (and smells) great when done.

 

Leftover from Wood with Cracks
By: Jake Gevorgian
March 02, 2012 · 824 views

My sister loves this vase! It's hers now :) Here you see a piece of wood that I started off by making shavings only. The wood has major cracks, I guess it wasn't sealer, at least I didn't see any sealant on the open grain... Anyhow, I ended up with this piece, and replaced the crack with a larger, but man made crack... Then twisted the wood...yeah, I'm good at that lol...and here it is. Special thanks to Moby for making this great music... Love it.

 

Making Wood Dust To Make This Vase (awkward, this Red Gum Wood wouldn't make shavings)
By: Jake Gevorgian
February 27, 2012 · 2,791 views

Here is how I decided to begin my Sunday. Wasn't what I expected...

 

Wood Turning With Naked Turner, Redwood Hollow Form
By: Erik Anderson
February 23, 2012 · 654 views

Wood Turning video

 

Wood Turning With Naked Turner, Pretty Acacia Wood Vessel
By: Erik Anderson
February 16, 2012 · 1,269 views

Wood Turning Video

 

Vessels By gerard merchant
By: Gerard Merchant
February 08, 2012 · 39 views

A Gallery of our Turned Vessels we have made in our first year of turning. visit me on Etsy and see what currently for sale. Click on link below ;https://www.etsy.com/shop/GMStudiosPens

 

2 Bowl Blanks Get Wood Turned Into Large Segmented Vessel Part2/2
By: Getting0Done
February 06, 2012 · 39,329 views

Small bowls can get boring quite fast but I am reluctant to stop turning them. So with a little imagination, two ordinary small bowls turn into one vessel. From bottom to top: ziricote, walnut blank, ziricote, zebrawood and ziricote accent ring, another ring of ziricote, the top walnut blank, a trim ring consisting of maple and walnut veneer stacked and segmented, and finally ziricote sapwood. I think it turned out amazing as I was quite reluctant half way through, first time trying veneer in a bowl and it payed off. If you missed part one click the annotation in the video or down below. http://www.youtube.com/watch?v gF_8YjuL5KE&feature plcp&context C310dd7fUDOEgsToPDskLehhxwTI4zMh-DET4entjL Hope you guys enjoy it and please comment, rate and subscribe for more videos to come.

 

2 Bowl Blanks Get Wood Turned Into Large Segmented Vessel Part1/2
By: Getting0Done
February 05, 2012 · 13,292 views

Small bowls can get boring quite fast but I am reluctant to stop turning them. So with a little imagination, two ordinary small bowls turn into one vessel. From bottom to top: ziricote, walnut blank, ziricote, zebrawood and ziricote accent ring, another ring of ziricote, the top walnut blank, a trim ring consisting of maple and walnut veneer stacked and segmented, and finally ziricote sapwood. I think it turned out amazing as I was quite reluctant half way through, first time trying veneer in a bowl as well and it payed off. Please watch part 2 for the final turning and finshing! Dont forget to give me your thoughts, rate and subscribe for more to come!

 

Turning maple vase 3 Tenon chucking
By: Nakajima Shintaro
January 29, 2012 · 817 views

No,3

 

Turning maple vase 2
By: Nakajima Shintaro
January 29, 2012 · 796 views

No.2

 

Turning maple vase 1 Roughing
By: Nakajima Shintaro
January 29, 2012 · 860 views

Birds-eye maple log on Robust AB25.

 

Vessel Turning 25.wmv
By: Doug Keown
January 29, 2012 · 420 views

Norfolk Pine finale episode with a tour of the studio Part 25 of 25

 

Vessel Turning 24.wmv
By: Doug Keown
January 29, 2012 · 305 views

Norfolk Pine Vessel part 24 of 25

 

Vessel Turning 23.wmv
By: Doug Keown
January 28, 2012 · 155 views

Norfolk Pine crown for large vessel 23 of 24

 

Vessel Turning 22.wmv
By: Doug Keown
January 28, 2012 · 254 views

Norfolk Pine crown for large vessel 22 of 24

 

Vessel Turning 21.wmv
By: Doug Keown
January 27, 2012 · 161 views

Norfolk Pine Vessel part 21 of ??

 

Vessel Turning 20.wmv
By: Doug Keown
January 27, 2012 · 422 views

Norfolk Pine Vessel part 20 of ??

 

Vessel Turning 19.wmv
By: Doug Keown
January 27, 2012 · 247 views

Norfolk Pine Vessel part 19 of ??

 

Vessel Turning 18.wmv
By: Doug Keown
January 27, 2012 · 162 views

Norfolk Pine Vessel part 18 of ??

 

Vessel Turning 17.wmv
By: Doug Keown
January 27, 2012 · 211 views

Norfolk Pine Vessel part 17 of ??

 

Vessel Turning 16.wmv
By: Doug Keown
January 26, 2012 · 158 views

Norfolk Pine Vessel part 16 of ??

 

Vessel Turning 15.wmv
By: Doug Keown
January 26, 2012 · 312 views

Norfolk Pine Vessel 15 of ??

 

Vessel Turning 14.wmv
By: Doug Keown
January 26, 2012 · 250 views

Norfolk Pine Vessel 14 of ??

 

Vessel Turning 13.wmv
By: Doug Keown
January 26, 2012 · 155 views

Norfolk Pine Vessel 13 of ??

 

Vessel Turning 12.wmv
By: Doug Keown
January 26, 2012 · 302 views

Norfolk Pine Vessel 12 of ??

 

Vessel Turning 11.wmv
By: Doug Keown
January 25, 2012 · 342 views

Norfolk Pine Vessel Setting the butterflys 11 of??

 

Vessel Turning 10.wmv
By: Doug Keown
January 25, 2012 · 389 views

Norfolk Pine Vessel Being routered for butterflys Part 10 of ??

 

Vessel Turning 9.wmv
By: Doug Keown
January 24, 2012 · 345 views

Norfolk Pine Vessel part 9 of ??

 

Vessel Turning 8.wmv
By: Doug Keown
January 23, 2012 · 107 views

Norfolk Pine Vessel 8 of ??

 

Vessel Turning 7
By: Doug Keown
January 23, 2012 · 102 views

 

Vessel Turning 6a.wmv
By: Doug Keown
January 23, 2012 · 462 views

Norfolk Pine Vessel

 

Vessel Turning 5.wmv
By: Doug Keown
January 20, 2012 · 190 views

Norfolk Pine close to shape ready to be mounted on face plate 5 of ??

 

Vessel Turning 4.wmv
By: Doug Keown
January 20, 2012 · 260 views

The vessel is starting to take shape Part 4 of ??

 

Vessel Turning 3.wmv
By: Doug Keown
January 20, 2012 · 252 views

Norfolk Pine Vessel part 3 of ??

 

Vessel Turning 2.wmv
By: Doug Keown
January 20, 2012 · 129 views

Norfolk pine vessel part 2 of ??

 

Vessel Turning 1.wmv
By: Doug Keown
January 20, 2012 · 210 views

Turning a large vessel made of Norfolk Pine

 

A Segmented Vase With A Twist.wmv
By: tnturner22
January 07, 2012 · 33,721 views

This segmented vase is made with 528 segments of mahogany & maple with a solid base.

 

Wood Turning a Segmented Vessel Time-lapse
By: Getting0Done
January 05, 2012 · 14,942 views

Turned segmented vessel made up of figured maple for the body, ziricote for the accent rings on the top and bottom and cherry and ziricote for the accent ring. Sorry about the music. I am looking to acquire some better tunes that doesn't have copyright problems but this was the best I could find for now. Took a couple days in all and will post more soon.

 

A Segmented Vase Part 7.mp4
By: tnturner22
December 16, 2011 · 6,127 views

A Segmented Vase Part 7 - This video describes how I finish the vase using tongue oil.

 

A Segmented Vase Part 6.mp4
By: tnturner22
December 11, 2011 · 4,361 views

In this video I will be truning the outside of the vase and sanding in preperation for the final finish.

 

ash hollow form
By: Mark Sanger
December 08, 2011 · 44,223 views

Mark Sanger roughing an Ash Hollow form

 

A Segmented Vase Part 5.mp4
By: tnturner22
December 08, 2011 · 8,705 views

A Segmented Vase Part 5. This video describes the method that I use to turn the inside of the the vase.

 

A Segmented Vase Part 4.mp4
By: tnturner22
December 02, 2011 · 4,032 views

A Segmented Vase Part 4. This video describes the methods that I use to sand the segmented rings on a drum sander and glueing the rings together to form the vase.

 

Woodturning Treasure vase4
By: 3earring3
November 30, 2011 · 1,128 views

 

A Segmented Vase Part 3.mp4
By: tnturner22
November 30, 2011 · 3,953 views

A Segmented Vase Part 3. This video describes the method that I use to glue the segments into rings. This vase contains a total of 15 rings with 24 segments in each ring for a total of 360 segments..

 

A Segmented Vase Part 2.mp4
By: tnturner22
November 29, 2011 · 7,115 views

Part 2 covers cutting the segments using a table saw sled.

 

A Segmented Vase Part 1.mp4
By: tnturner22
November 27, 2011 · 5,665 views

A Segmented Vase Part 1. Made with 361 pieces of mohonany. This video discusses the 'plan' and cuting the lumber to the proper dimensions.

 

woodturning ( a vase knitted with wood - 1 )
By: amen ahmed
November 01, 2011 · 754 views

it's made of 13 different kinds of woods it contains nearly 2000 small wood pieces

 

woodturning ( a vase knitted with wood - 2 )
By: amen ahmed
November 01, 2011 · 477 views

its made of 13 different kinds of woods and it contains nearly 2000 small pieces of wood

 

Making a Segmented Vase
By: Mick Brown
October 01, 2011 · 1,329 views

A brief glimpse into making a Segmented Vase

 

Making a Segmented Vase 1
By: Mick Brown
September 29, 2011 · 10,940 views

Segmented Vase made from Ash,Iroko and Purpleheart

 

Woodturning Treasure vase
By: 3earring3
September 08, 2011 · 1,804 views

 

Oops on a vase
By: Tom Tunget
August 26, 2011 · 2,454 views

A blowup while turning a vase

 

Diófa váza
By: demeterlaszlo55
August 10, 2011 · 8,448 views

 

Woodturning Treasure vase 3
By: 3earring3
August 02, 2011 · 531 views

 

Woodturning Treasure vase 2
By: 3earring3
July 14, 2011 · 593 views

 

Wood Turning Project Apple Wall Vase
By: Carl Jacobson
July 13, 2011 · 7,527 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Wood turning project this is a apple wall vase. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Datura Vase by Johannes Michelsen Wood Turned Artwork
By: JoHannes Michelsen
July 09, 2011 · 907 views

http://www.johannesmichelsen.com/ This beautiful flowering plant inspired a one-of-a-kind wood turned vase artwork by Johannes Michelsen. Click Link Above to see the beautiful Vase. This vase gets its name from a flowering plant that we were lucky enough to find and have in our garden last year. Luckily, it reseeded itself and we now have several; one of which has opened three flowers. The plants full name is 'Datura Meteloides Toloache'. It has a gorgeous flower that I am reminded of by the form of this vessel; maybe it was that flower that internally inspired me to produce the form. It is turned of Northern White Ash Burl; it is turned thin like a hat and is incredibly light weight, just 24 ounces! Most of that being down low in the foot for stability.

 

Woodturning Treasure vase
By: 3earring3
July 08, 2011 · 924 views

 

Wood Turning Project Bud Vase from reclaimed wood
By: Carl Jacobson
July 05, 2011 · 56,857 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. This wood turning project takes about 20 min. This is from a reclaimed wood. I am not certain about the species of the wood. Very hard wood with a beautiful grain that finished up nicely. This is great fast gift idea for dried or fresh flowers when you have a glass vial to insert. These can be found most local craft stores. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning Flower's shape cup vase
By: 3earring3
June 25, 2011 · 559 views

The proportion very has not been good 比例沒有拿捏好

 

Woodturning Flower's shape cup vase
By: 3earring3
June 13, 2011 · 6,613 views

 

Woodturning Projects Miniature Bud Vase
By: ThisWoodwork
June 12, 2011 · 16,889 views

I was recently sent a box of wood so I wanted to do a quick project. I was doing a woodturning, making a tiny miniature small bud vase on the lathe. showing you can make projects from scrap peices of wood. Great little woodturning project to do. I use a high gloss lacquer finish by polishing the lacquer finish. woodturning woodworking turning wood shop woodshop how to howto make woodworker woodturner tips and tricks teenwoodworker alex harris

 

Woodturning Miniature Myrtlewood Vase
By: Carl Jacobson
June 08, 2011 · 36,916 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Miniature Myrtlewood Vase.This wood turning project takes about five minutes and is a great way to use up your scraps. The pin chuck I use in the video can be purchased from most wood turning supply companies. Thanks you for watching my wood turning series on youtube I hope it helps you with some ideas and plans for your next project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Making a Hollow Vessel by Mike Jackofsky (woodturning DVD preview)
By: Craft Supplies USA
June 03, 2011 · 92,666 views

Watch a short woodturning DVD trailer on making a hollow vessel with Mike Jackofsky. Buy now: https://www.woodturnerscatalog.com/p/99/4620/Mike-Jackofsky-Woodturning-Making-a-Hollow-Vessel-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA In this entertaining and detailed video, Mike shares his techniques for turning his signature hollow vessels. Mike's comprehensive explanation and demonstration takes you through the entire process, from a basic block of wood to a beautiful hollow vessel. 124 mi

 

Wood Turning Projects two part vase from salvaged wood
By: Carl Jacobson
May 18, 2011 · 12,489 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Small round vase with wood salvaged from Viridian wood products. Although the specific species is unknown it has a beautiful grain and character. It is very much like teak in the color and density. This is a fast and fun project you can do on the lathe in about an hour. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Vessel and Bowl Forms
By: David Marks
May 13, 2011 · 4,328 views

One of the most important things in woodturning is the form. David discusses a technique to help come up with a good form for turning vessels and bowls.

 

Don Russell Segmented Vase Preview Part Two (2).mpg
By: Ron Brown
April 15, 2011 · 4,836 views

Don introduces his unique methods and processes for constructing these wonderful colorful vases. This is a preview of a video presentation to be released June 2011 edited and produced by Ron Brown.

 

Don Russell Segmented Vase Preview 001.mpg
By: Ron Brown
April 14, 2011 · 184,839 views

Segmented Vase DVD Preview. To be released June 2011. This sneak preview features the polychromatic segmented vases made popular by Don Russell of Georgia. This is the most comprehensive work ever released featuring Don's unique approach to this fascinating and complex style of segmented turning. It will be a multi disk release including many CAD drawn diagrams, tips, tricks, hints and sources.

 

NEFWA March 2011 - Small Hollow Form with Collar - Part 4 of 4
By: North East Florida Woodturners Association
April 07, 2011 · 1,210 views

Small Hollow Form with a Collar. Part 4 of 4 Demonstration by Tom Grzybala at the March 2011 meeting of the Northeast Florida Woodturners Association

 

NEFWA March 2011 - Small Hollow Form with Collar - Part 3 of 4
By: North East Florida Woodturners Association
April 07, 2011 · 701 views

Small Hollow Form with a Collar. Part 3 of 4 Demonstration by Tom Grzybala at the March 2011 meeting of the Northeast Florida Woodturners Association

 

NEFWA March 2011 - Small Hollow Form with Collar - Part 2 of 4
By: North East Florida Woodturners Association
April 07, 2011 · 599 views

Small Hollow Form with a Collar. Part 2 of 4 Demonstration by Tom Grzybala at the March 2011 meeting of the Northeast Florida Woodturners Association

 

NEFWA March 2011 - Small Hollow Form with Collar - Part 1 of 4
By: North East Florida Woodturners Association
April 07, 2011 · 1,638 views

Small Hollow Form with a Collar. Part 1 of 4 Demonstration by Tom Grzybala at the March 2011 meeting of the Northeast Florida Woodturners Association

 

segmented woodturning : tribute to wood vase
By: Rick Koorman
April 03, 2011 · 16,039 views

Segmented Woodturning This is a vase i made in 2010. A special thanks for malcolm tibbets for letting me borrow the port-hole idea. Any question? Feel free to contact me!!

 

Arte al tornio - Vasetto per Adriana
By: Livio Maritati
February 24, 2011 · 21,609 views

Scavo e decorazione artistica di un'anforetta tornita in legno di acero grigio

 

Ulicocco - Connubio tra ulivo e albicocco
By: Livio Maritati
February 08, 2011 · 15,273 views

Passo passo di un lavoro composito al tornio in legno di ulivo e albicocco con scavo e texture

 

Woodturning segmented Vase Sheggy by A.D.G..avi
By: Anto Dega Wood
February 04, 2011 · 2,841 views

 

Turning a Tall Segmented Cylindrical Vessel Part 2 of 2
By: KochUSA
February 01, 2011 · 3,834 views

Created on February 1, 2011 using FlipShare.

 

Turning a Tall Segmented Cylindrical Vessel Part 1 of 2
By: KochUSA
February 01, 2011 · 3,898 views

Created on February 1, 2011 using FlipShare.

 

Lume da tavolo al tornio
By: Livio Maritati
January 27, 2011 · 57,881 views

Costruzione di una lampada in ulivo passo dopo passo con finitura in gommalacca

 

HollowForm
By: ric47scroll
January 18, 2011 · 2,008 views

Making a simple hollow form dish. There are many more videos on my web site at http://www.scrollsaws.com. I also have a large selections of scrollsaw videos.

 

Small Vase
By: ric47scroll
January 15, 2011 · 3,794 views

This is one of the shorter videos I have on woodturning. There are many more on my web site at http://www.scrollsaws.com. I also have a large selections of scrollsaw videos.

 

Scavare un'anforetta
By: Livio Maritati
December 22, 2010 · 47,526 views

Tornire un pezzo di ulivo con uno scavo impegnativo avente l'apertura di soli 21millimetri.

 

Nasce una penna - Parte Seconda
By: Livio Maritati
December 17, 2010 · 18,136 views

Come fare una penna dalla A alla Z. Collaborazione a distanza tra Nonno Tony e Nonno Livio (Inderoff).

 

Drechselkurse
By: johann340
November 19, 2010 · 2,290 views

Bei diesem Video zeigt ein Fachlehrer der HTBLA Hallstatt wie eine Vase entsteht.

 

Tornitura del legno: Vaso spiralato
By: Truciolara
October 06, 2010 · 38,023 views

Sequenza di finitura di un vaso ad otto spire, tornito su il tornio Vicmarc 300, con sgorbia a profilare affilata ad unghia, scavato con sgorbia a profilare e 'Multi tip' della Sorby

 

Woodturning a flower in a vase for the ladies
By: WoodturnerTroms
October 03, 2010 · 34,363 views

Small project; a red flower in a cute little vase.

 

Brian McEvoy's secrets to creating two piece hollow forms (woodturning DVD preview)
By: Craft Supplies USA
September 29, 2010 · 6,040 views

A preview of Brian McEvoy's woodturning video 'Secrets to creating two piece hollow forms'. Buy now: https://www.woodturnerscatalog.com/p/78/4529/Brian-McEvoy-Secrets-to-Creating-Two-Piece-Hollow-Forms-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Known for his exceptional hollow forms with some over 4 feet tall, Brian McEvoy has takes you step-by-step through the process of creating hollow forms using his two-piece technique that can be used for small and large forms alike using only basic woo

 

Woodturning Projects two part vase
By: Carl Jacobson
September 23, 2010 · 8,985 views

I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I started woodworking with my grandfather as a young boy. I

 

Woodturning Projects small vase on the lathe in two parts
By: Carl Jacobson
September 15, 2010 · 70,361 views

In this video I turned a small vase on the lathe. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have an

 

Padlóváza
By: 04JANIKA
August 04, 2010 · 4,067 views

Szegmentált akác padlóváza

 

Eucalyptus Vessel
By: David Marks
July 29, 2010 · 7,622 views

David shows you and example of another beautiful wood turning

 

Maple Leaf Vessel
By: David Marks
April 10, 2010 · 9,021 views

Another David Marks piece that will be an inspiration to all!

 

Vessels of Illusion with Trent Bosch (woodturning DVD preview)
By: Craft Supplies USA
March 15, 2010 · 6,864 views

A preview of Trent Bosch's woodturning video 'Vessels of Illusion'. Buy now: https://www.woodturnerscatalog.com/p/78/3910/Bosch-Studios-Vessels-of-Illusion-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Professional woodturner and instructor Trent Bosch takes you through all the steps and processes used to create his 'Vessels of Illusion'. This is a process that Trent has developed and refined throughout his woodturning career. He takes you from the wood lot, to the bandsaw, to the lathe, throug

 

Works done this week with Adina
By: PERUTURNER
March 14, 2010 · 3,756 views

Copaiba vessels and bowls done this week,finnishing in 2-3 weeks after drying

 

Making Heirlooms that Last with Mike Mahoney (woodturning DVD preview)
By: Craft Supplies USA
March 12, 2010 · 189,412 views

A preview of Mike Mahoney's woodturning video 'Heirlooms that last'. Buy now: https://www.woodturnerscatalog.com/p/78/4311/Bowlmaker-Inc-Making-Heirlooms-That-Last-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Make something of special value which can be handed down from one generation to another. Mike Mahoney, one of Americas foremost woodturners, discusses his approach to turning bowls, plates, and canisters. Processes include harvesting the wood, rough turning and drying, sanding, hand thr

 

MOV01961.MPG
By: Williamoyoung
February 28, 2010 · 873 views

Hogging Out Bowl With Oland Tool

 

Woodturning Apple Weed Vase
By: Carl Jacobson
February 07, 2010 · 92,663 views

In this video I turned a Apple wood vase. I really enjoy turning Apple wood. If you make this project I'd really like to see it, you can always share your project on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Ro

 

estoraque and catahua vessels and boxes
By: PERUTURNER
January 17, 2010 · 1,570 views

some of the works done last month

 

woodturning vessels www.5thdensity.biz
By: 5thdensityturner
January 14, 2010 · 6,611 views

Click here http://www.5thdensity.biz

 

Wood Turning Project Redwood Vase
By: Carl Jacobson
January 10, 2010 · 54,994 views

I turned a small Redwood vase on the lathe. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any ques

 

From forest to final form
By: Hans-Jürgen Reger
January 03, 2010 · 20,471 views

Woodturning and WoodArt in Bavaria. Kunstdrechslerei in Neumarkt. Holzkunst aus Neumarkt. Vom Wald bis zur Endform. Gedrechselte Schalen aus Kirsche. bowls about cherrywood. Wohnaccessoires aus Holz. Schalendrechseln. turning a bowl from cherrywood. cuttingboards from cherrywood.

 

Wood Turning Project Myrtle wood vase
By: Carl Jacobson
December 26, 2009 · 13,917 views

Making a Myrtle wood vase on the lathe. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Share your pictures on my website, and see what everyone else is making. Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

final turning of vessel in olive wood
By: PERUTURNER
November 23, 2009 · 2,555 views

turning with the new sorbys sovereing 1/2'gouge extra long

 

Woodturning Taxus Woodturning (4) Fhotos( Hollow forms, vases..)
By: TaxusWoodturning
November 14, 2009 · 4,063 views

Serie fotográfica de vasijas ahuecadas, jarrones..

 

Adina making a vessel 123 003
By: PERUTURNER
November 04, 2009 · 1,602 views

making the outside

 

Adina making a vessel 123 002
By: PERUTURNER
November 04, 2009 · 925 views

Jacaranda vase in the making. Had a bit of trouble with the interior, Too much vibration, think I was holding my tools too tightly.

 

Adina making a vessel 123 001
By: PERUTURNER
November 04, 2009 · 481 views

Turning vessel in Peruvian Jacaranda (Tulipwood). Part One

 

WOODTURNING
By: Tony Hamad
October 26, 2009 · 8,020 views

 

Woodturning an Elegant table-top vase - Part 3
By: James Smith
August 28, 2009 · 12,203 views

The Turnist shows the final stages of making an elegant Padouk table-top vase, including a brief glimpse of his custom cole jaw modification.

 

Woodturning an Elegant table-top vase - Part 2
By: James Smith
August 24, 2009 · 17,607 views

The Turnist shows some of the methods he uses to make an elegant Padouk table-top vase with insert. Part two shows the main body of the vase being formed.

 

Woodturning an Elegant table-top vase - Part 1
By: James Smith
August 23, 2009 · 19,021 views

The Turnist shows some of the methods he uses to make an elegant Padouk table-top vase with insert.

 

Woodturning Genie Bottles
By: geniebottles
July 23, 2009 · 2,322 views

My finished spalted black walnut genie bottle.

 

vase with void 008
By: PERUTURNER
March 12, 2009 · 8,956 views

this vase was made today with my new nova chuck

 

Ivory&Ebony vessels for sale series 2
By: PERUTURNER
January 21, 2009 · 1,571 views

woodturning of vases in catahua wood

 

vases fire series
By: PERUTURNER
January 20, 2009 · 308 views

catahua vases for sale texturized and fire style painting,from 100 to 150.00 us dollars

 

olive vases drying out before finnish
By: PERUTURNER
January 07, 2009 · 9,486 views

olive wood vases drying out

 

Building a 25-Inch Diameter Segmented Vessel
By: KochUSA
October 10, 2008 · 69,945 views

Building and Turning a 25-Inch Diameter Segmented Maple Cylinder. This cylinder was used in constructing the 2009 Dallas Area Woodturners entry into the AAW Chapter Collaborative Challenge at the AAW Symposium. It won 1st place in the Artistic division and it won Best of Show at the Symposium.

 

Turned Wooden Vases
By: WoodenNicol
September 19, 2008 · 15,105 views

Turned Wooden Vases created by The Wooden Nicol

 

le vase en platane
By: tournar
March 31, 2008 · 1,072 views

séparation du vase

 

vase en platane
By: tournar
March 31, 2008 · 4,324 views

formation du col

 

Woodturning - a small simple vase
By: teksu313
October 23, 2007 · 246,380 views

I tried to turn a simple and tiny vase.

 

Return to Turning Videos

Powered by Google

Great Bargains


Free Shipping on All Rockler Orders $35+ every day in February and March, just click here


Rockler Full-Size Ergonomic Carbide Turning Tools

On Sale for only $79.99 each

Save $30.00 each


List price: $109.99

Available with Square Cutter
Click here for more information or to purchase

Available with Square Radius Cutter
Click here for more information or to purchase

Available with Round Cutter
Click here for more information or to purchase

Available with Diamond Cutter
Click here for more information or to purchase


Nova G3 Comet II Reversible Chuck

On Sale for only $125.99 each

Save $64.00 each


List price: $189.99

Click here for more information or to purchase


Excelsior 5-Speed Mini Lathe With Free Bed Extension

On Sale for only $299.99 each

Save $75.59 each


List price: $375.58

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Robust Tools
Hunter Woodturning Tools
Backgate

(Click any Ad to go to our Sponsor's Website)