Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Inside-Outside Turnings Videos (22)

Sort by

Or click here to: Search All Videos


Inside Out Christmas Ornament-Part 2
By: woodturningwithtim1
November 19, 2018 · 12,913 views

By using some clever turning techniques, Tim shows how to make an ornament with as much going on inside, as outside. Part 2 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Inside Out Christmas Ornament-Part 1
By: woodturningwithtim1
November 19, 2018 · 12,643 views

By using some clever turning techniques, Tim shows how to make an ornament with as much going on inside, as outside. Part 1 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Inside out Christmas Ornament
By: Mauro il tornitore
November 15, 2018 · 472 views

This video describes how I made an inside out Christmas ornament for the Christmas Challenge 2018. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Questo video descrive come ho realizzato un ornamento natalizio per la Challenge 2018. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Inside Out Turning Part II
By: Lee Burkholder
February 08, 2018 · 258 views

Cumberland Valley Wood Turners, lathe, wood turning, wood working, inside out turning,

 

Inside Out Turning Part I
By: Lee Burkholder
February 08, 2018 · 522 views

Cumberland Valley Wood Turners, wood, wood turning, lathe, inside out turning, turning wood, wood shop,

 

Gordon DeKrey demonstrates Inside/Outside Turning
By: Rocky Mountain Woodturners
June 20, 2016 · 1,163 views

Gordon DeKrey demonstrates Inside/Outside segmented turning to the Rocky Mountain Woodturners on June 9, 2016.

 

Woodturning, Inside out blow up
By: The Wood Whirler
January 11, 2016 · 5,702 views

First attempt at turning an inside-out vase with a super fast blow out.

 

Inside Out Woodturning
By: DentonTurners
January 05, 2016 · 11,299 views

Jimmy Cusic joins us to show how to make “Inside-Out” turnings by turning a baby rattle. This type of turning is fun and challenging both to the skill and imagination. You will also like the “wow” factor when someone looks at it asking “ how did you do that”? Jimmy entered a table containing an inside-out turned pedestal into the Texas State Fair in 2011 and took 2nd place in the Wood Turning category. This demo was recorded at the January 2016 meeting of the Golden Triangle Wood-turners in Denton Texas. We meet the first Monday of each month in the Center for the Visual Arts (Hickory and Bell streets in Denton) at 7pm. All are welcome. Our website is http://www.goldentrianglewoodturners.org We thank Jimmy for his contribution and great demo.

 

Bradford Pear Root Bottle Stopper 2015
By: David Clevenger
June 03, 2015 · 489 views

Bottle Stopper made from a piece of a root from a Bradford Pear tree.

 

Follow up to Inside Out turning
By: micpen22
March 11, 2015 · 65 views

I have have been ill for a bit and will start up loading videos again soon

 

Part 2 Inside Out Turning
By: micpen22
February 18, 2015 · 1,114 views

Part Two inside out turning

 

Inside out Turning Part 1
By: micpen22
February 16, 2015 · 3,256 views

I was asked by my Wood turners club to do an inside-out turning Demo. I thought it would be nice to share it on youtube as well.

 

Inside-Out Vase Woodturning
By: Cip's Wood Chips
August 14, 2014 · 398,513 views

I made an inside-out Christmas ornament back in December. This time I want to try it again and made a small flower vase from a piece of yellow pine.

 

Inside Out Turning Short Version
By: RJBWoodTurner
June 10, 2014 · 1,377 views

Inside Out Turning - Short Version I have been wanting to teach myself to do inside our turning for a while now. I have been watching videos and reading about the process and finally felt like I was ready to give it a go. The difference between the full version and the short version of this video is: in the full version, I show the actual turning. The short version removes that and just delivers the description of what I did. A special thank you goes out to Jay Bates for sending me this beautiful yellow and green poplar.

 

Inside Out Turning - Full Version
By: RJBWoodTurner
June 09, 2014 · 24,921 views

I have been wanting to teach myself to do inside our turning for a while now. I have been watching videos and reading about the process and finally felt like I was ready to give it a go. The difference between the full version and the short version of this video is: in the full version, I show the actual turning. The short version removes that and just delivers the description of what I did. A special thank you goes out to Jay Bates for sending me this beautiful yellow and green poplar.

 

Paul Moore Inside Out Turning
By: Stateline Woodturners
March 04, 2014 · 1,063 views

Paul Moore, President of the Stateline Woodturners Club, a member of the American Association of Woodturners, demonstrates 'Inside-Out' turning at a club meeting. Club website is: 'Statelinewoodturners.com'.

 

Making a Glue-up Block for Inside-Out Turning
By: Cip's Wood Chips
December 14, 2013 · 18,390 views

Before you can make an inside-out turning, you need a glue-up block: Four sections of wood glued together with paper for easy separation.

 

Inside Out turning
By: Bill Thomas
May 10, 2013 · 636 views

A Disaster waiting to happen. Don't ever forget to chuck up properly or this could happen to you.

 

Inside Out Turning Part 3
By: David Clevenger
August 26, 2012 · 24,416 views

Part 3 of 3 Parts Final installment of the series Inside Out Turning

 

Inside Out Turning Part 2
By: David Clevenger
August 26, 2012 · 90,621 views

Part 2 of 3 Parts. A new way of turning I am learning.

 

Inside Out Turning Part 1
By: David Clevenger
August 26, 2012 · 85,718 views

Part 1 of 3 Parts This is an unusual type of turning I am trying for the first time

 

Dave's Lathe Vol.5.wmv
By: David Clevenger
November 10, 2008 · 4,095 views

Turned Eccentric Wood Goblets

 

Return to Turning Videos

Great Bargains
(ends November 27, 2019)


Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase

 


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase


Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Rockler
Arizona Carbide
Flutemaster

(Click any Ad to go to our Sponsor's Website)