Woodturning Online Videos

Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Jewelry Holders Videos (32)

Sort by

Or click here to: Search All Videos

From Log to Jewelry Tray
By: Daniel Vilarino
October 25, 2019 · 647 views

Hi! In this video I turn a jewelry tray out of a sweet birch log. I hope you enjoy the video, if that is the case, please click on the like button. Also, make comments and if you have not subscribed yet to my YouTube channel, please do so. If you did not enjoy the video, rather than giving me a thumbs down, please, send me a comment or an e-mail to the address that appears at the bottom of this description. I am open to constructive criticism and there is always room to improve. The music used in this video has been obtained from Internet sites that offere music free of royalties and allow its use in videos. From www.looperman.com: 'Estrings 3' by Eendee From www.youtube.com/audiolibrary/music: 'Glory be' by Patrick Patrikios 'Everything is Fine' by Sir Cubworth 'Clover 3' by Vibe Mountain Thank you very much for watching! Cheers! Daniel danielrvs@gmail.com


De Tronco a Despojador de Joyas
By: Daniel Vilarino
October 25, 2019 · 2,537 views

Hola! En este video realizo el torneado de un despojador de joyas partiendo de un tronco de abedul dulce. Si disfrutaste de este video, por favor dale un click al botón de 'me gusta'. También haz comentarios y si aun no te has subscripto a mi canal de YouTube, por favor hazlo. Si no the gustó el video, en lugar de dar un 'no me gusta' por favor, haz un comentario o envíame un mensaje a la dirección de correo electrónico que aparece al final de esta descripción. Siempre estoy abierto a críticas constructivas y siempre hay algo que se puede mejorar. La música que usé en este video la he obtenido de sitios de internet que ofrecen música libre de regalías y permiten su uso en videos. De www.looperman.com: 'Estrings 3' por Eendee De www.youtube.com/audiolibrary/music: 'Glory be' por Patrick Patrikios 'Everything is Fine' por Sir Cubworth 'Clover 3' por Vibe Mountain Muchas gracias por ver el video! Un gran abrazo! Daniel danielrvs@gmail.com


new jewelry box
August 31, 2019 · 128 views

new jewelry box out of spalted beech and the problems with my new camera


Roberts Drechselbude - Sta nder für Schmuck
By: Roberts Drechselbude
May 12, 2019 · 121 views

Meine Kleine hat zur Kommunion einige Ketten, Rosenkränze und anderen Schmuck geschenkt bekommen. Da das alles sonst nur in irgendwelchen Schubladen 'verschwinden' würde, hab ich einen Ständer dafür gebaut. Das Fuß-& Kopfteil bestehen aus leicht gestockter Buche, der Stiel aus Ahorn und die Knöpfe aus Palisander. Als Drehteil habe ich eine M6-Gewindestange mit einem Kugellager gebastelt.


Jewelery box
By: Woodturning by Alan Scannell
March 28, 2019 · 448 views

This week i re-purposed a bowl i wasn't happy with into a jewelry box. I do love spalted beech and gave it a mahogany dome with a bog oak finial. Hope you enjoy watching.


By: Turning the Groove
February 07, 2019 · 101 views

Back after a break! In this episode I take a trunk of a lilac bush and turn it down into a nice little jewelry dish. Beautiful swirls of purple set the backdrop for some fresh and aromatic tracks. Sit back and enjoy!


Turning A Ring Keeper
By: Gord Rock
January 18, 2019 · 2,410 views

Turning a Ring Keeper for someone to keep their rings on when they are not being worn. Made of oak and bloodwood. Finished with Yorkshire Grit and Hampshire Sheen. Want to support my channel? https://www.buymeacoff.ee/GordRock


Woodturning - Laburnum jewerly box
By: CraftWithAfshin
September 22, 2018 · 3,493 views

Hi in this video i wanted to show my first attempt at woodturners box hinge which is great way to make turned boxes look extra fancy. Thank you all for watching! link to the box hinge: https://www.prokraft.co.uk/BHX..html


Woodturning - A Pocket Watch Stand
By: Blind Woodturner
March 30, 2018 · 1,201 views

I turned a pocket watch stand for a friend. You can watch how I made it and see how it turned out. *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I’m a huge horror film


Wood turning - Complete demo of Jewelry box with lacquer finish!
By: CraftWithAfshin
February 04, 2018 · 4,394 views

---Please also check out these wonderful wood turners--- Mike Waldt : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w RickTurns : https://www.youtube.com/channel/UCghK0Pjzr5YaZK2SlC2Dftw Carl Jacobson : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Stuart Arts : https://www.youtube.com/channel/UCrux70rjZflDA6-ypvaH8DQ Heath Knuckles:https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ Aleksey Bek : https://www.youtube.com/channel/UCz-hSlcLGBOfzw9RKs7m_5g M. Saban Smith Woodturning: https://www.youtube.com/channel/UCpHZv5j6vdMmFjXHDBxPLxw Andy Phillip : https://ww


Quick And Easy Ring And Jewelry Holder
By: As Wood Turns
September 22, 2017 · 2,273 views

http://www.AsWoodTurns.com This project is fairly quick and easy yet functional and beautiful. While simple, it has potential for many variations. Essentially, it is a bowl with a spindle - the best of both worlds. The bowl is small and shallow with the center left in place. The spindle resembles a flame. A ring or rings can be placed on the tip of the flame. The bowl portion is 4x4x1. The flame starts with 1x1x6. Mine are finished with lacquer. To make this ring holder, first turn the shallow bowl using the usual bowl turning techniques. The difference is to leave the center. This means th


Making a Jewelry Egg Container from Olive Wood - Woodturning
By: Jake Gevorgian
February 04, 2017 · 50,422 views

Jewelry storage made from Olivewood with threaded lid.


By: Nick Zammeti
January 11, 2017 · 20,666 views

Here's the link to UKIWS , This is in July this year and you need to buy tickets on the site if your going. http://www.ukiws.co.uk/ Music By Heres the link to the one in the US. Also need tickets. http://www.woodturner.org/?page 2017KC MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ……………………………………………………………………………………………………………………………………


By: Nick Zammeti
January 06, 2017 · 43,268 views

Makers Central 2019 https://www.makerscentral.co.uk/HOME Nick Zammeti/ Instagram https://www.instagram.com/nickzammeti Nick Zammeti Personal Instagram https://www.instagram.com/zammeti My Website http://www.nickzammeti.co.uk The Epoxy Art Resin I Use http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ Come follow me on Twitter https://twitter.com/nickzammeti Check out my Facebook Page https://www.facebook.com/nickzammeti/ MUSIC PROVIDED BY http://www.epidemicsound.com/ ……………………………………………………………………………………………………………………… SEND ME STUFF FAO NICK NZ WOO


Hand woodturnig a two bar necklace holder
By: woodturner21
December 31, 2016 · 5,226 views

This is not a tutorial but a video showing how I make a simple two bar holder in beech.


By: Nick Zammeti
September 30, 2016 · 60,483 views

WOODTURNING PROJECT, IDEAS. WOODTURNER. MUSIC BY https://soundcloud.com/danijel-zambo https://danijel-zambo.bandcamp.com/ SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nickzammeti/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ


Jewelry Bowl
By: George Fotinakes
May 24, 2016 · 136 views

Wood lathe project to turn two pieces of wood into an attractive ring and jewelry storage unit.


Woodturning with Tim Yoder-Necklace and Jewelry Holder
By: woodturningwithtim1
April 29, 2016 · 37,432 views

Tim tries his hand at turning a necklace and jewelry holder. This one is special in that it has a hidden rotating hinge... enabling the top to spin to make necklace selection easier. Remember 'you can't learn from perfect' so that is why you are watching Tim. Materials used: Roto Hinge sold by Lee Valley Tools. Here is the link to the 3/8' hinge he used in the video. http://www.leevalley.com/us/wood/page.aspx?p 40237&cat 3,41241,41265


KD Oak Earring Stand- Hand woodturning in real speed.
By: woodturner21
April 04, 2016 · 55,154 views

Here is a video of how I make the ever popular Earring stands. Most woodturners make these and we all have slightly different methods. The methods shown are not to be taken as the correct way just my way.


Necklace Hanger Follow Up and Shop Update
By: RJBWoodTurner
March 31, 2016 · 960 views

Necklace Hanger Follow Up and Shop Update There were a couple questions that needed to be answered from my Necklace Hanger video I also wanted to go over what’s happening in the shop. Regards, Bob Blanford Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 YouTube: https://m.youtube.com/user/RJBWoodTurner E-Mail Address: RJBWoodturner@ufoww.com Mailing address for stickers: P.O. Box 114 Newburgh, IN 47620-0214 Black Widow Woodworks Meet the Maker Interview – Bob Blanford http://youtu.be/K72FCOp2Xs4


How to make a Necklace Hanger
By: RJBWoodTurner
March 27, 2016 · 1,840 views

My daughter wanted something to hang her necklaces on after seeing a necklace hanger I made for my wife. Her name starts with 'G' so I found a fancy letter 'G' and here's what I came up with. Regards, Bob


Naked Turner Shows Earing Stand
By: Erik Anderson
February 28, 2016 · 1,557 views

I show an earing stand that was inspired by Tom Stratton The Acolyte Woodturner.


Episode 8: Jewelry Holder
By: As The Wood Turns
February 03, 2016 · 84 views

This week we make a place to store your rings and bracelets and watches. Sure, it's limited to about two of each but regardless. We made it and it turned out great. Of course there was several issues but it wouldn't be an 'As The Wood Turns' video without them now, would it? Please enjoy this video and please subscribe. New videos every Wednesday.


#25 Simple Earring Holder - Wood Turning - Acolyte Turner
By: Tom Stratton
June 04, 2015 · 16,170 views

In my latest video I turn a simple earring holder from a small board end of cherry. This is a great way to use up left over stock.... Mike Waldt's video of an alternative version is here: www.youtube.com/watch?v B_7gW5khfr0 Further projects, turnings and information can be found at http://tomturns.com Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where explicitly stated. All brand and product names are trademarks or registered trademarks of their respective companies and are hereby acknowledged. TAGS Acolyte Turner, Acolyte, Turner, Wood Turning, Turning, Wood, Project, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, help, tips, training, learning, how to, Tip, Tom Stratton, Turning Tools, Carbide Tools, Tools, Bowl Gouge, Spindle Gouge, Roughing Gouge, Tool Sharpening, Sharpening, Earring Earring Holder Earring Stand Cherry


First jewelry box bandsaw
By: Confusion Wood
May 10, 2015 · 4,682 views

First jewelry box bandsaw wood: oak http://www.youtube.com/subscription_center?add_user ConfusionWood my channel: http://youtube.com/ConfusionWood


ConfusionWood - jewelry box - zebrano oak
By: Confusion Wood
February 07, 2015 · 9,408 views

http://www.youtube.com/subscription_center?add_user ConfusionWood my channel: http://youtube.com/ConfusionWood


The Blind Woodturner - Episode 8 - An Ear-ring Holder
By: Blind Woodturner
October 02, 2014 · 468 views

In this installment, Chris turns an ash ear-ring holder which incorporates a little dish for other small items.


Woodturning Saguaro Cactus Necklace Holder
By: As Wood Turns
February 13, 2014 · 2,316 views

http://www.AsWoodTurns.com I chose to turn this cactus shaped necklace holder as I'm 'on-location' in Arizona. To me, it is an exercise in slicing a woodturning and re-gluing it for a different effect. At the same time, since I don't have access to a drill press, I used my lathe to drill holes in the side for the cactus arms. Despite all this, it still will serve nicely as a necklace holder. At least that's my story and I'm sticking to it. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.


Mahogany Jewelry Boxes
By: Steve Lindsley
September 10, 2013 · 101,489 views

My co-worker, Alex, asked if I'd make jewelry boxes for his daughters. His only request was that they be identical except for the girl's initials inlaid into the top. Other than that I was on my own. This video shows what I came up with and the basic steps for making these mahogany jewelry boxes. They were fun to make. I hope you enjoy the video. Comments are always welcome.


Wood Turning - A Jewelry or Trinket Box
By: Mike Waldt
March 19, 2013 · 56,724 views

I turn a lidded jewelry or trinket box from Sycamore, with an Ebony finial.


Wood Turning - An Earing Holder
By: Mike Waldt
March 06, 2013 · 47,282 views

I turn an Ear Ring Holder from Goncalo Alves, a tropical hardwood. Inspired by Andy Coates RPT


Ékszerdoboz esztergálása
By: demeterlaszlo55
February 27, 2011 · 11,132 views


Return to Turning Videos

Great Bargains
(ends November 27, 2019)

Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase

Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase

Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Great Bargains
(ends December 24, 2019)

Denim Woodturner's Apron

On Sale for only $17.99

Save $12.00

List price: $29.99

This is a one-size fits all, heavy duty denim apron with a soft-cloth collar and criss-cross shoulder straps. It even includes a pencil pocket.

Click here for more information or to purchase


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase


Sorby 6-Piece Woodturning Set with Book and DVD (Woodturning: A Foundation Course)

For only $229.99

Save $100.00

List Price: $329.99

Robert Sorby's flagship set of turning tools is designed to fill the needs of woodturners from beginner to professional. These high-quality tools will shorten the learning curve for those just starting out, and are sure to impress the seasoned woodturner. The set comprises six of Robert Sorby's core range of tools: a roughing gouge, spindle gouge, bowl gouge, skew, parting tool and scraper. Each tool is crafted from the highest quality high speed steel, and married to a comfortable handle turned from solid ash. The set arrives in a high quality box that provides an attractive presentation as a gift, and practical storage thereafter.

Click here for more information or to purchase

Dust Right® Lathe Dust Collection System

For only $39.99

Save $20.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase

Excelsior Mini Lathe

For only $229.99

Save $70.00

List Price: $299.99

The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200 RPM. Cast-iron body provides mass for minimal vibration, stable turning and maximum durability.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodturning Tool Store
Woodturning Online

(Click any Ad to go to our Sponsor's Website)