Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Lamps Videos (101)

Sort by

Or click here to: Search All Videos


Finishing the Elm Pedestal/Urn Lamp Base
By: Nathan Cumming
March 14, 2019 · 342 views

In this video I turn the top trumpet of this large pedestal/urn lamp base before wiring the components and fitting the shade. Website Links: For the Shade and lamp harp - https://www.tiffanylightingdirect.co.uk For the flex cable, switch and bulb holder - https://www.lampsandlights.co.uk/ Thanks for watching

 

Woodturning The Elm Burr/Burl : A Large Pedestal Urn Lamp Base
By: Nathan Cumming
February 28, 2019 · 1,425 views

In this video i take a piece of the large Elm burr/burl and woodturn it to make a large pedestal/urn table lamp base. After roughing the blank into round i think that the wood is actually a tree canker that had burr caps on the outside of it, that said, it still has incredible colour and grain. Originally, I planned to fill the cracks and inclusions with resin but in the end decided to only stabilise them with CA glue. In the second part of this project i will turn an addition to the top to help elevate the shade above the lamp base so that more of it is visible. I'll also go through the wiring process. Thank you to all my Subscribers for your continual support, it is very much appreciated and motivating to keep making content for you to view. If you haven't yet Subscribed please visit my channel and consider Subscribing to be sure to see future videos of similar projects and much more. Thanks for watching!

 

Beautiful Pine cone & Resin Lamp
By: CraftWithAfshin
February 26, 2019 · 1,112 views

Hi everyone today im turning a Lamp out of resin and pine cone casted by myself i hope you like it :) Another resin project: https://www.youtube.com/watch?v kAxfv6ET3B8 My amazon Influencer US Link : https://www.amazon.com/shop/craftwithafshin My amazon Influencer UK Link : https://www.amazon.co.uk/shop/craftwithafshin ------------------------------------------------- (Tools and Products I used in this video) Record poer coronet Herald lathe: https://www.recordpower.co.uk/product/herald-heavy-duty-cast-iron-electronic-variable-speed-lathe#.XGmLq-j7RhE Resin: https://amzn.to/2SZnBVX Pearl Ex : https://amzn.to/2XrVnSb Yorkshire grit Microfine: https://amzn.to/2Gtkgb1 ------------------------------------------------- My email: Craftwithafshin@yahoo.com

 

woodturning: root lamp
By: Guil The Bearded Woodworker
February 21, 2019 · 2,489 views

ETSY STORE: https://www.etsy.com/au/shop/Thebeardedwoodworks FACEBOOK: https://www.facebook.com/beardedwoodworker/ Instagram: https://www.instagram.com/guilthebeardedwoodworker/ SEND ME YOUR STICKERS, OR SEND ME A BLANK OR WHATEVER: 'Guil Noronha the bearded woodworker' po box 353 Maitland, NSW, Australia 2320

 

Lamp Demonstration Medium Copy
By: Robert O Connor The Woodturning Studio
December 11, 2018 · 24 views

Demonstrating a four piece Sycamore lamp

 

Christmas Project #1
By: The Pohl Barn Productions
November 30, 2018 · 15,369 views

A not so quick up cycle using a votive. walnut and resin. We now have a Sponsor with a promo code, info below. video was done before this but the code is still good. hopefully I can squeeze a project in with their product next week or so. Sponsored by Total Boat and Jamestown Distributors Find them here. use PROMO CODE POHLBARN for 20% off totalboat.com or jamestowndistributors.com Music A license to use the following media was purchased under Pond5's Content License Agreement, a copy of which is available for review at https://www.pond5.com/legal/license. The Pond5 license authorizes t

 

From The Creek To A Lamp Part 3
By: Aidan Israel
November 13, 2018 · 6 views

This was a fun part enjoy the video!

 

From The Creek To A Lamp Part 1
By: Aidan Israel
November 01, 2018 · 11 views

I'm making a lamp out of some resin and wood, come see how I did it!

 

Ash and Oak Lamp Woodturning
By: Elias Klingvall
September 22, 2018 · 4,643 views

Woodturned segmented lamp made of Ash and Oak Svarvad segment lampa gjord av Ask och Ek Gammelgarn Ängmans Snickeri Gotland

 

Open Segmented Lamp - Episode 143
By: Paul Lockwood
August 21, 2018 · 540 views

This is the last in this mini series of the scrap wood that I got from Barry (for now anyway). Using the same 11mm pieces of Sapele plus a few bits of Iroko to create a pattern I make a mini LED table lamp with shade. When I was half way through the last project I was already planning this one in my head. A few blowouts along the way that were soon fixed, finished with spray varnish. I used a single white LED and a mobile phone charger to power the LED. Another first in my projects with some inside-out turning on the stem. You can find me on the below Social Media Instagram: https://www.instagram.com/paul.a.lockwood/ @paul.a.lockwood Twitter: https://twitter.com/paullockwooduk @paullockwooduk Facebook: https://www.facebook.com/PaulLockwood.Woodworking/ Pinterest: https://www.pinterest.co.uk/lockwood3538/ Etsy: https://www.etsy.com/uk/shop/PaulLockwoodUK Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Woodturning - The Epoxy Resin and Bogwood Sea Life Lamp
By: Twisted Crafts UK
July 09, 2018 · 4,764 views

In this video i make and turn a sea life lamp using two part epoxy resin and bog wood. Subscribe now to follow me on my journey into the world of woodturning! Find me on facebook @twistedcraftsuk or use the link below. https://www.facebook.com/twistedcraftsuk/ Here are a few links for some of the items i used in my video Epoxy Resin - https://resin4art.com/ Yorkshire Grit - http://yorkshire-grit.com/ Thanks for watching guys!

 

woodturning a lamp
By: The Apartment Woodturner
June 23, 2018 · 157 views

Woodturning a lamp using reclaimed heart pine from the 1800's, finished it off with a golden oak finish.

 

The Lichen Lamp
By: Jim Overton - Jimson's Stuff
May 20, 2018 · 22,182 views

In this video I will be showing how I made this retro style lamp using an epoxy resin and wood hybrid blank I made. Easy Wood Tools http://www.easywoodtools.com/ Easy Wood Tools are available in the UK fro Amazon.co.uk, make sure that the seller is Easy Wood Tools fulfilled by Amazon as there are some 3rd party sellers who are selling them through Amazon at much inflated prices. Yorkshire Grit turner's abrasive paste http://yorkshire-grit.com/ The resin I used was Polycraft Clear Top 35 epoxy resin, available from MBFG in Belfast NI http://www.mbfg.co.uk/epoxy-resins/polycraft-cleartop-35-b

 

121 - Woodturning - Confetti Lamps
By: Roweville Retro
May 19, 2018 · 218 views

This week's project is a pair of confetti lamps. They use lamp oil or alcohol. Available from Rockler: http://www.rockler.com/confetti-lamp-inserts Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

woodturning- Making a Pencil lamp from colored pencils!
By: Nick Zammeti
May 18, 2018 · 42,127 views

This is an old video that has been requested by a few people but shortened down like loads to about 7 mins and I've changed the music. ha-ha. FOLLOW ME ON INSTAGRAM https://www.instagram.com/nickzammeti/?hl en MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/

 

Veladores Cubicos de Madera
By: TORNEANDO MADERA CON MARIO CANTARUTTI
May 15, 2018 · 16,875 views

 

Woodturning - Lets turn a lava lamp!
By: CraftWithAfshin
April 09, 2018 · 1,235 views

---Please also check out these wonderful wood turners--- Mike Waldt : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w RickTurns : https://www.youtube.com/channel/UCghK0Pjzr5YaZK2SlC2Dftw Carl Jacobson : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Stuart Arts : https://www.youtube.com/channel/UCrux70rjZflDA6-ypvaH8DQ Heath Knuckles: https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ mrbarefootart: https://www.youtube.com/channel/UCzhDgRmGlYTYS_IWCRQUsRg leksey Bek : https://www.youtube.com/channel/UCz-hSlcLGBOfzw9RKs7m_5g M. Saban Smith Woodturning: https://ww

 

Wood Turn a Table Lamp - Pt 2
By: Mike Peace Woodturning
March 23, 2018 · 2,960 views

I demonstrate how I wood turned a table lamp base of dry wood on my lathe. I used mahogany but any dried wood can be used, but may require gluing up the blank. This was a fun, challenging project with some problems to solve including making the base and body from separate blanks and turning a finial that mimics the shape of the lamp. I upload new wood turning videos regularly so Ya’ll come back, hear? Click here for Part 1 https://youtu.be/54weN1YjA8k Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Wood Turn a Table Lamp - Pt 1
By: Mike Peace Woodturning
March 23, 2018 · 4,350 views

I demonstrate how I wood turned a table lamp of dry wood on my lathe. I used mahogany but any dried wood can be used, but may require gluing up the blank. This was a fun, challenging project with some problems to solve including making the base and body from separate blanks and turning a finial that mimics the shape of the lamp Click here to watch Part 2 https://youtu.be/JhrJbKjYCpw I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Spalted silver birch lamp, by Philippe Robert
By: LivingArtsCo
March 13, 2018 · 43 views

Woodturning at my open air shop in winter, making a spalted silver birch lamp.

 

Segmented Lamp - Episode 117
By: Paul Lockwood
February 24, 2018 · 627 views

Using Oak as the main segments these are spaced apart on every quarter with a small piece of Sapele. It took several days to glue the rings up before they could go on the lathe. Smoothed most of the inside out and ended up with an outside shape similar to a bell. Sanded to 400 grit, given a couple of coats of Briwax Dark Oak to fill out the grain and then finished off with Microcrystaline Wax. Music I Don't See the Branches, I See the Leaves by Chris Zabriskie is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/dtv/ Artist: http://chriszabriskie.com/ Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

A Different Kind of Lamp # 115
By: The Wood Whirler
February 20, 2018 · 2,300 views

This video has a little bit of everything, inside/outside turning, epoxy shade, etc. Lots of screw ups. All on me.

 

точение плафона из клена ясенелистного wooden lamp turning
By: Vladimir Drozdov | Woodturning | lignum vitae workshop
January 30, 2018 · 34 views

https://vk.com/tochenoederevo

 

A lamp made from an up-cycled Whisky glass !! (part 1)
By: Templeboy Turnings
January 05, 2018 · 1,029 views

Welcome back, in this video I make 2 lamps from Mahogany wood and up-cycled whisky glasses. This is part one of a two, in the second video I will show how the stem and base are made and the completed free standing lamp. Thanks for watching. ITEMS MENTIONED IN THIS VIDEO Yorkshire Grit abrasive sanding paste :- http://yorkshire-grit.com/ Simon Hope 6mm Hollower :- https://hopewoodturning.co.uk/tools-handles/hope-carbide-cutting-tools/ MY MEDIA INFO Templeboy Turnings Web site and shop :- http://templeboyturnings.com/ Templeboy Turnings Facebook page :- https://www.facebook.com/Temple

 

Liten Lampa Small Lamp Woodturning
By: Elias Klingvall
December 29, 2017 · 3,955 views

Liten svarvad segment lampa gjord av Valnöt Gammelgarn Ängmans Snickeri Gotland Small woodturned segmented lamp made of Walnut

 

Mahogny Lampa Mahogany Lamp Woodturning
By: Elias Klingvall
December 08, 2017 · 1,163 views

Svarvad segment lampa gjord av Mahogny Gammelgarn Ängmans Snickeri Gotland Woodturned segmented lamp made of Mahogany

 

Lume da tavolo (sostituzione base),fai da tè - Light repair woodturning
By: Anto Dega Wood
November 10, 2017 · 200 views

Piccolo progetto sulla tornitura - da tempo dovevo sostituire questa base perché era danneggiata, adesso è arrivato il momento di giusto. Legno di eucalipto , proveniente dalla mia zona.

 

Lume e paralume in ulivo - Lamps and Lampshades in Olive Trees - English subtitles
By: Livio Maritati
October 16, 2017 · 2,557 views

Costruzione passo passo di un lume da tavolo completo di stelo e di paralume tutto in ulivo con decorazioni in passamaneria.

 

Woodturning a Matching Pair of Idigbo Lamps
By: Nathan Cumming
October 15, 2017 · 4,543 views

In this video I turn a matching set of bedside lamps from Idigbo. Once again the colour tones and grain patterns are stunning. A simple design for turning the first one but difficult for replicating the second. However they both finished very well. Thank you for watching, especially to my Subscribers. If you haven't Subscribed yet please take the time to visit my channel and check out my other videos. If you enjoyed this video please hit the thumbs up button and feel free to comment and share. MUSIC CREDITED TO: Fantasy by Del https://soundcloud.com/del-sound Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) https://creativecommons.org/licenses/... Music provided by Audio Library https://youtu.be/84GNW_Mx7cU

 

Woodturning a matching pair of Meranti Spiral Lamps - Sorby Spiralling Tool
By: Nathan Cumming
October 02, 2017 · 1,516 views

In this video I turning a matching pair of bedside table lamps from Meranti. Mernati has a nice colour but not very interesting grain so I turned a simple shape and used the Sorby spiralling tool to cut spirals into the spindle to make it more interesting. An in depth explanation of the long hole boring kit can be found in this video: https://www.youtube.com/watch?v M6iKa-NgPNE A walkthrough on wiring the electrical components can be found in this video: https://www.youtube.com/watch?v APTaw9OZb2w&t 25s Thank you to my Subscribers for your continued support. If you aren't a Subscriber yet please Subscribe and visit my channel and have a look at my other videos. Thanks for watching! MUSIC CREDITED TO: Fantasy by Del https://soundcloud.com/del-sound Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) https://creativecommons.org/licenses/... Music provided by Audio Library https://youtu.be/84GNW_Mx7cU

 

'Bug Light'
By: Rons Woodturning shop
September 30, 2017 · 221 views

This one was fun and challenged me. Had to redirect several times. Pretty cool though at night near Halloween.

 

Oak Table Lamp - Episode 98
By: Paul Lockwood
September 23, 2017 · 427 views

Using some Free Oak off cuts and an Oak bowl blank I create an Oak table Lamp. Sanded to 400, sanding sealer, Woodwax22 and Microcrystaline wax. Music Stickybee, Insomnia & Omaha By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Woodturning a Spalted Beech Lamp - Part 2
By: Nathan Cumming
July 13, 2017 · 5,733 views

Woodturning a Spalted Beech Lamp - Part 2 In this video I finish woodturning the lamp body and assemble it before wiring the bulb holder. I start by woodturning the base, truing the blank and cutting a mortice for the scroll chuck jaws to hold. It's a deep mortice so the cable can be concealed underneath the base. I bored a side hole too for the cable to enter and began an initial shaping of the base. Once I was happy with that I sanded and finished the underside of the base so it could be turned around and mounted on the chuck for final shaping. The shape I decided to go for was a Roman Oge

 

Turning a Spalted Beech Lamp - Part 1
By: Nathan Cumming
July 10, 2017 · 5,975 views

In this video I begin working on turning a lamp from Spalted Beech. I demonstrate using Record Power's Long Hole Boring Kit to bore the centre hole for the power cable before proceeding to turn the spindle. Once the spindle is turned and sanded to 800 grit I apply sanding sealer and friction polish to a gloss finish. Finally I explain the type of bulb holder fittings I use and how to prepare the spindle for mounting the bulb holder on. In part 2 of this project I'll turn the base, assemble the two parts and fit the electrical cable and components to complete the lamp. Subscribe so you're sure not to miss out. Please leave your thoughts in the comments Link to Record Power's Lathe accessories: http://www.recordpower.co.uk/category/1-14-x-8-tpi-lathe-accessories

 

Woodturning a table lamp / Κατασκευή φωτιστικού στον ξυλότορνο !
By: Kostas Annikas Deftereos
July 01, 2017 · 5,327 views

Σε αυτό το βίντεο φτιάχνω ένα φωτιστικό από ξύλο ελιάς !! Αρκετά απλό και εύκολο προτζεκτ. Ευτυχώς ήρθε και ο φίλος μου ο Σπύρος και με βοήθησε στο πιο βαρετό κομμάτι της κατασκευής τις καλωδιώσεις !!! ελπίζω να σας άρεσε η κατασκευή περιμένω τα σχόλια σας ! μέχρι την επομένη εβδομάδα κάλα να περνάτε !! Aν θέλετε μπορείτε να με βρείτε και στις παρακάτω σελίδες ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos Η μουσική είναι μια πρόσφορα από τους way light creations μπορείτε να μπείτε στο site τους και να κατεβάσετε δωρεάν μουσική : http://waylightcreations.com η να δείτε τις όμορφες κατασκευές τους στο youtube : https://www.youtube.com/channel/UC38CQXaEkI4k_sQCIZOJJ0Q

 

Wood turning - A table lamp from beautiful English Yew!
By: CraftWithAfshin
June 19, 2017 · 1,623 views

Hi everyone! today im turning a table lamp holder, its my first time doing this so i wont be showing the cable and bulb holder fixing as im not qualified electrician so i wont promote my way i doing it, but any kit you buy has instruction on them.

 

Cherry LED Accent Light / Woodturning Project Idea
By: Carl Jacobson
May 19, 2017 · 52,644 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg I used Cherry to make this accent light, and finished it with beeswax. I used a LED lighting kit form Home Depot, and installed it in the base. Small aluminum rods separate the rings. Howard beeswax: http://astore.amazon.com/thewood0c-20/detail/B00DKWRNZ0 LED Light: http://www.homedepot.com/p/Commercial-Electric-12-in-30-cm-Linkable-Single-Color-Indoor-LED-Flexible-Tape-Light-Kit-4-Strip-Pack-17066/207018583 My Etsy shop: https://www.etsy.com/shop/Thewoodshoptv Patreon: https://www.patreon.com/Ca

 

Roberts Drechselbude - Ein kleines Windlicht
By: Roberts Drechselbude
May 14, 2017 · 212 views

Heute ein kleines Projekt: Ein Windlicht für das Schirmloch im Terrassentisch. Dafür habe ich den Rest der Salzmühle aus Robinienholz genommen und mit der Eichenschale im Ammoniak geräuchert.

 

Svarvad Lampa av Valnöt Woodturned Lamp Woodturning
By: Elias Klingvall
May 01, 2017 · 302 views

Woodturned segmented lamp made of Walnut Svarvad segment lampa gjord av Valnöt Gammelgarn Ängmans Snickeri Gotland

 

One of a Kind Lamp # 80
By: The Wood Whirler
April 19, 2017 · 10,651 views

This lamp is made out of Osage Orange, Walnut, Gum Balls, Pine Cones, Epoxy and is beautiful.

 

THE PENCIL LAMP SHADE!
By: Nick Zammeti
March 31, 2017 · 102,287 views

Making a pencil lampshade for my daughter Lucy. Kerplunk http://www.toysrus.co.uk/toys/kerplunk-game/0030266 MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE

 

Woodturning an oil lamp
By: Dry Creek Woodturning
March 31, 2017 · 254 views

An older video of me turning an oil lamp from silver maple. Yes, the lighting could be better

 

Κατασκευή φωτιστικού από θαλλασoξυλο / Valentines Day Maker Challenge 2017
By: Kostas Annikas Deftereos
January 28, 2017 · 14,206 views

Αυτό είναι το βίντεο για την εισαγωγή μου στο valentine's challenge που διοργανώνει ο φίλος Shogun-jimi ! ελπίζω να σας αρέσει !!! περιμένω τα σχόλια σας μαζί θα τα ξαναπούμε την επομένη κυριακή !!! εδώ είναι τα link του Valentines Day Maker Challenge 2017 !!! https://www.youtube.com/playlist?list PLp1gai6QjnedYDxLQSQyYtbQGzztJMbHR Μπορείτε να με βρείτε επίσης στις παρακάτω σελίδες facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos

 

Woodturning Night Lamp Time Lapse
By: SG Art Turning
January 20, 2017 · 4,060 views

My Web Site : https://sg-art-turning.com My Facebook : https://www.facebook.com/SGTurning/ My You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg

 

How to turn an Oak table lamp by hand.
By: woodturner21
January 13, 2017 · 35,400 views

This shows how to make a table lamp. Hand woodturning. Sorry about the quality of the video.

 

Woodturning with Tim Yoder- Wood & Alumilite Accent Light
By: woodturningwithtim1
January 02, 2017 · 43,820 views

Using an Alumilite and Claro Walnut blank Tim makes a translucent hanging light fixture. Elbo Tool: http://www.woodturningwithtim.com Keith Lackner Alumilite blanks: https://www.facebook.com/KeithsCustomWoodworking/ Yorkshire Grit: http:www.http://yorkshire-grit.com/ Abranet: http://www.turningwood.com/ RZ Mask: https://rzmask.com/ Ron Brown's Best Donut Chuck: http://ronbrownsbest.com/index.php?route product/product&product_id 793

 

Woodturning Spalted Lamp Shade
By: SG Art Turning
December 27, 2016 · 57,539 views

Merry christmas and happy new year. Have fun ! My Web Site https://sg-art-turning.com

 

Woodturning translucid Lamp Part 2
By: SG Art Turning
December 22, 2016 · 56,319 views

Sam : https://www.youtube.com/channel/UCRZxyT3UUS8spkIZDAsaFnA Carl : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Mike : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w

 

Woodturning translucid Lamp
By: SG Art Turning
December 20, 2016 · 148,816 views

Woodturning translucid Lamp 1/32' thickness from ambrosia log. Check the giveaway video at 1000 subcribers. My web site : https://sg-art-turning.com

 

Lampe bauen - Lampe mit 3D Effekt - DIY - Holzweger
By: Thomas Hilleke
October 27, 2016 · 9,833 views

Ihr braucht dazu: Eine Lichterkette http://amzn.to/2ey7IQM 3D Folie http://amzn.to/2eyc4av eine Heißklebepistole http://amzn.to/2eyAVLE eine Drechselbank http://amzn.to/2aU9GZ7 passende Werkzeuge http://amzn.to/2aU7HE4 ein gutes Futter http://amzn.to/2dYOaXZ Sowie passende Forstnerbohrer http://amzn.to/2dpl0kp Handycam http://amzn.to/2q3Blfo Kamera http://amzn.to/2pT0HQV Lampe bauen - Lampe mit 3D Effekt - DIY - Holzweger ******************************************************************* besucht mich bei Facebook unter https://www.facebook.com/Holzweger *********************************

 

Woodturning black walnut table lamp.
By: yak branson
September 29, 2016 · 978 views

Had this lamp kit for over a yr and was time to use it!

 

Pallet Upcycle Challenge 2016, A Dollshouse Lamp, Willem's WoodNotes
By: Willem Kossen
August 27, 2016 · 837 views

Pallet Upcycle Challenge 2016, A Dollshouse Lamp made from a Pallet It is that time of the year that Sterling Davis hosts the Pallet Upcycle Challenge. A yearly ritual that celebrates the Pallet as a source of project material, yielding brilliant creations by the maker community on Youtube. And i managed to get my entry in, just in time. A lamp, but not a big one. A lamp for a dollshouse. My wife likes dollshouses and making and furnishing them is her hobby. This project allowed me to join in and make something for her house. A table lamp made from pallet pine. I sawed a board from the Pall

 

A Yew Table Lamp
By: Ian Maude
July 12, 2016 · 9,500 views

I mak a replacement table lamp for one my cat smashed! It's a lovely piece of Yew. The project was not as simple in the end as I thought it would be. Still, the finished piece is lovely!

 

Como hacer una lámpara de parafina parte 5 de 6 - Arte en Torno
By: Arte en Torno
April 08, 2016 · 4,055 views

Cesar nos va a explicar como construir mediante procesos lógicos una lampara para aceite o parafina líquida en madera y en el torno. Técnica: Torneado de plato. Para que cualquier tornero con o sin experiencia lo pueda hacer. En el vídeo N 1 nos da un listado de materiales, herramientas y procesos.

 

Como hacer una lámpara de parafina parte 6 de 6 - Arte en Torno
By: Arte en Torno
April 08, 2016 · 4,368 views

Cesar nos va a explicar como construir mediante procesos lógicos una lampara para aceite o parafina líquida en madera y en el torno. Técnica: Torneado de plato. Para que cualquier tornero con o sin experiencia lo pueda hacer. En el vídeo N 1 nos da un listado de materiales, herramientas y procesos.

 

Como hacer una lámpara de parafina parte 4 de 6 - Arte en Torno
By: Arte en Torno
April 06, 2016 · 4,816 views

Cesar nos va a explicar como construir mediante procesos lógicos una lampara para aceite o parafina líquida en madera y en el torno. Técnica: Torneado de plato. Para que cualquier tornero con o sin experiencia lo pueda hacer. En el vídeo N 1 nos da un listado de materiales, herramientas y procesos.

 

Como hacer una lámpara de parafina parte 3 de 6 - Arte en Torno
By: Arte en Torno
April 05, 2016 · 2,728 views

Cesar nos va a explicar como construir mediante procesos lógicos una lampara para aceite o parafina líquida en madera y en el torno. Técnica: Torneado de plato. Para que cualquier tornero con o sin experiencia lo pueda hacer. En el vídeo N 1 nos da un listado de materiales, herramientas y procesos.

 

Como hacer una lámpara de parafina parte 2 de 6 - Arte en Torno
By: Arte en Torno
April 04, 2016 · 3,080 views

Cesar nos va a explicar como construir mediante procesos lógicos una lampara para aceite o parafina líquida en madera y en el torno. Técnica: Torneado de plato. Para que cualquier tornero con o sin experiencia lo pueda hacer. En el vídeo N 1 nos da un listado de materiales, herramientas y procesos.

 

Como hacer una lámpara de parafina parte 1 de 6 - Arte en Torno
By: Arte en Torno
April 03, 2016 · 4,085 views

Cesar nos va a explicar como construir mediante procesos lógicos una lampara para aceite o parafina líquida en madera y en el torno. Técnica: Torneado de plato. Para que cualquier tornero con o sin experiencia lo pueda hacer. En el vídeo N 1 nos da un listado de materiales, herramientas y procesos.

 

Beacon Lamp Woodturners Wonders
By: Peter Stewart
January 29, 2016 · 4,391 views

Here's a video covering the Beacon Lamp from Woodturners Wonders. ------------------------------------------- Beacon Lamp: http://woodturnerswonders.com/collections/lamps/products/beacon-lathe-lamp Woodturners Wonders: http://woodturnerswonders.com ----------------------------------------------------- My website: www.peterturnswood.com ----------------------------------------- My vlog channel: https://www.youtube.com/channel/UCiSTSMFgLuO02VCMbFBoTrA ------------------------------------------------------------------------------- If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

Piantana
By: Livio Maritati
January 28, 2016 · 7,804 views

Costruire una piantana con cablaggio elettrico e paralume tornendo e assemblando vari pezzi di ulivo, aggirando anche le asperità tipiche di questa essenza.

 

Furnitura Organica 03 Lamp ReConstruction
By: Dipa Das
October 08, 2015 · 4,955 views

I found in a garbage Floor Lamp.. I just bought a new LED bulb and lamp is functional.. But it does not look very nice, so..

 

Extreme Woodturning - Cedar Lampshade
By: As Wood Turns
September 11, 2015 · 11,612 views

http://www.AsWoodTurns.com My best learning comes from watching someone turn a fantastic project and then making it myself. Soren Berger did a great demo of a lampshade. So I had to try one myself. My lampshade is Atlas or Titan Cedar which is more dense than the more common western red cedar. It is about 7 1/2 inches in diameter and 8 inches high. I'm leaving it not sanded and without any finish. With the depth inside the lampshade, this was tough going. I feared that at any moment a catch would destroy my work. Yet both the lampshade and I survived the experience. It was challenging. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Maple and Walnut LED accent light
By: Carl Jacobson
August 17, 2015 · 9,729 views

LED accent light! I pick up the LED kit at Home Depot it was 45 Lighting kit, http://www.homedepot.com/p/Commercial-Electric-8-ft-Color-Changing-LED-Flexible-Tape-Under-Cabinet-Light-with-Wireless-Remote-DC5237WH-A/204087512?MERCH REC-_-nosearch2_rr-_-NA-_-204087512-_-N I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareK

 

Turned Accent Light
By: Carl Jacobson
August 14, 2015 · 14,222 views

I turned this Maple and Walnut accent light out of Maple and Walnut. I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?tracking carl Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pag

 

Ambrosia Lamp shade destruction.
By: Adze Woodturning
August 03, 2015 · 29,277 views

I attempted to turn an Ambrosia lamp shade down to an eigth of an inch but you only get one chance. I basically had the shade complete and forgot to lock down the tool rest. Bummer.

 

Woodturning a Solar Lamp Base
By: Jerry Paul
August 02, 2015 · 468 views

It took me a while to make this one, but I did it! LOL! This is a piece of Mountain Ash that I was given a station wagon trunk load of, by my friend Elan. She recently had a tree removed and fended off all who wanted to burn it as firewood so that I may make nice things from it. Thank you Elan! I'll be making that mortar and pestle right away! ... I'll probably even make a video of it. ;)

 

Furnitura Organica 02 Light in Wood - Original Lamps
By: Dipa Das
May 12, 2015 · 4,391 views

Few lamps in Natural shape.. A part on Lathe or Bandsaw and All by my Hands.. Walnut, Ash, Cherry, Spruce wood..

 

Chestnut, and Walnut Lamp
By: Carl Jacobson
May 08, 2015 · 13,970 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg I was inspired again by my Uncle's work. I turned this Walnut and Chestnut lamp on the lathe, it's 19 inches tall. I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.c

 

Tokar Art 14 Woodturning plate Tree of Communication & lamp Light of Heart
By: Dipa Das
April 06, 2015 · 8,555 views

How to get from waste wood (2,5x17x80 cm) a plate 33 cm in diameter and 5 (30) cm tall? And from second piece of wood a lamp 'Light of Heart'.. Everything is possible in our Woodshop! :-) Ako dostať z kúska dreva len 17cm širokého a 2,5cm vysokého Tanier 33cm v priemere a 5cm hlboký?? A z druhého kúska Lampička Svetlo Srdca'.. Všetko je Možné v našej Dieľničke.. :-)

 

How To Make One Piece Table Lamps
By: Paul Crabtree
March 27, 2015 · 470 views

How to Make One Piece Table Lamps They are very practical in every day living and can be extremely beautiful!

 

Using a Wood Lathe to Fix a Lamp
By: Cip's Wood Chips
March 23, 2015 · 1,579 views

The wood lathe is one of the most versatile tools in the shop. I am going to use the wood lathe to repair my wife's m\new lamp.

 

How to Make One Piece Table Lamps
By: Paul Crabtree
February 27, 2015 · 1,709 views

A Start to Finish Way of Making Table Lamps That are Most Beautiful!

 

Maple Desk Lamp
By: Carl Jacobson
October 24, 2014 · 36,987 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg I turned a Maple desk lamp. I'm not a licensed electrician you should check with one before doing any electrical work. I turned all the pieces on the lathe for this project. RZ Mask: Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Face shield: http://astore.amazon.com/thewood0c-20... I upload a new project video every Friday, and I'm live Monday on YT and Friday on Twitch. Check out my Twitch channel. https://www.twitch.tv/carljacobson

 

Turned Cherry lamp base and assembly
By: H F Bowern Designs - Harold Bowern
October 14, 2014 · 1,256 views

This week I am making a lamp base from a piece of 5/4 Cherry to be the base for a lamp standard that I had turned. Anyways have fun watching! Most of all thanks for watching, I really do appreciate it. If you like this video, please click the Like button. If haven't already don't forget to Subscribe to my channel to continue watching more of my videos. If you would like to follow my gardening adventures on YouTube, drop by my gardening channel: https://www.youtube.com/user/TheOldWoodworker You can also visit my website http://hfbowern.com for a view at samples of the work that I have done, other things about me and my obsession with woodworking. A hobby gone out of control !! As always, See you in the Workshop or the Garden!

 

Woodturning Rustic Lamp Base
By: Custom Chris
October 08, 2014 · 6,193 views

Rustic Lamp base for a rusty guy HA! Come to my Amazon Store and find all your wood turning needs in one place. Easy to find products. http://astore.amazon.com/customchris-20 If you know a item that needs to be added to the store let me know. Profit go's towards the channel to make it better. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

#47 Woodturning a Walnut Table Lamp Part 2
By: Stephen Ogle
September 10, 2014 · 29,126 views

Woodturning a Walnut Table Lamp Part 2 of 2 for my aunt who asked for one years ago. Also my answer to Robbie the Woodturner's ALS Ice bucket challenge to me. For information on ALS or how to donate please click the following link: http://www.alsa.org/about-als/what-is-als.html For John William's Youtube channel: https://www.youtube.com/channel/UCxqLQhfL5quPYfQDMBQw2zQ For Mike Walt's Youtube channel: https://www.youtube.com/user/TheCymruBoy

 

#46 Woodturning a Walnut Table Lamp Part 1 of 2
By: Stephen Ogle
September 10, 2014 · 72,245 views

Woodturning a Walnut Table Lamp Part 1 of 2 for my aunt who asked for one years ago. Also my answer to Robbie the Woodturner's ALS Ice bucket challenge to me. For information on ALS or how to donate please click the following link: http://www.alsa.org/about-als/what-is-als.html For John William's Youtube channel: https://www.youtube.com/channel/UCxqLQhfL5quPYfQDMBQw2zQ For Mike Walt's Youtube channel: https://www.youtube.com/user/TheCymruBoy

 

Split turning lamp base part 2
By: H F Bowern Designs - Harold Bowern
August 22, 2014 · 281 views

Final episode of a split turning lamp base. Today I am taking it from where I left off in video 1 to the finish construction stage. I will be doing a follow-up on this when I have the lamp with wiring and finish coats of stain and top coats. I have some other lamps I want to do and will finish them all at the same time. Anyways, have fun watching! Most of all thanks for watching, I really do appreciate it. If you like this video, please click the Like button. If haven't already don't forget to Subscribe to my channel to continue watching more of my videos. If you would like to follow my gardening adventures on YouTube, drop by my gardening channel: https://www.youtube.com/user/TheOldWoodworker You can also visit my website http://hfbowern.com for a view at samples of the work that I have done, other things about me and my obsession with woodworking. A hobby gone out of control !! As always, See you in the Workshop or the Garden!

 

Split turning lamp base part 1
By: H F Bowern Designs - Harold Bowern
August 16, 2014 · 829 views

Hey guys welcome back to my channel. Today I am going to start a split turning lamp base project. I am by no means a professional woodturner. There are plenty of great ones on the YouTube circuit. Regarding some of the woodturners that I watch on YouTube, I would like to shout out to a few Carl Jacobson - one of my first influences in turning and also for getting my Delta lathe his channel https://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ Mike Waldt - The goblet master, fantastic resource for all that is goblets and many other instructional woodturning, his channel https://www.youtu

 

Woodturning-Lamp Shade
By: Peter Stewart
August 15, 2014 · 5,334 views

The lamp shade was made out of Ash and I used a 3 coats of brushing lacquer for a finish.

 

drechseln eines Sturmlichtes [HD]
By: Tiroler Drechsler
May 24, 2014 · 250,134 views

Heute drechseln wir ein Sturmlicht. Es ist 30cm hoch und besteht aus einer normalen Weinflasche. Der Unterteil ist aus Eichenholz das mit Bienen- und Canaubawachs eingelassen. Webseite: http://tirolerdrechsler.jimdo.com/ kamera: Sony Xperia Go Have fun! \( _ )

 

Turning a butternut lamp #5
By: I Turn Two
May 03, 2014 · 908 views

A quick beginners project for turning a lamp on a lathe using butternut/white walnut and mahogany sections

 

wood turning #47 LampShade
By: The Tiny Trailer Workshop
February 08, 2014 · 17,245 views

Hello there: This is a project made from a piece of the top of a Douglas-Fir that snapped off in the last big wind! You can see a piece of it leaning up against the trailer at the beginning of the video. You can see even more of it over on my other channel... Larry McCafferty in the video Winter Waterfalls. For those few who read this far I wanted to let you know that this was very nearly my last video! At the point where the boring with the Forstner bit was done, (the second time)... the bit had become very dull and by then there was so much smoke in the shop that even with the respira

 

Woodturning Lamp Shade - Base de Abajur
By: Macoy de Freitas Ribeker
January 30, 2014 · 1,181 views

 

Woodturning With Naked Turner Finished Lamp Project
By: Erik Anderson
December 14, 2013 · 428 views

 

Build an Edison Lamp from reclaimed wood
By: Chad Schimmel
October 11, 2013 · 81,328 views

This is a lamp I built from reclaimed wood and extra parts. Be sure and subscribe for new videos every Friday. Music By Call to Adventure Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ For all other inquiries please email smokeyartworks@gmail.com

 

Wood Turning Lamp
By: Carl Jacobson
October 04, 2013 · 29,336 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg In this video I made a wood lamp using turned wood disks. I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv Carolina Shoe: https://www.carolinashoe.com/Products?page 1&gender Mens&sorting Popularity Use Carolina10 at checkout for a discount. Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order Wood Turners W

 

Un lume in ulivo
By: Livio Maritati
September 07, 2013 · 2,316 views

Una lampada per la postazione PC

 

The Broken Lamp-Rebuild.
By: Chris Pine
July 12, 2013 · 1,647 views

I use the hardware from a broken lamp to re-create it in wood! Lots of fun and a handsome walnut lamp when all is said and done! Music in the video is provided by Freeplaymusic.com 'Cinematic Sounds Vol. 3- Anything is Attainable'. Cap'n Eddie Castelin video that I mention in this video is at this address: http://www.youtube.com/watch?v _73FQwSSsHU Please Subscribe to My Channel! http://www.youtube.com/channel/UCoiFVDvzJX8tXXF5GsUPc_Q Facebook: https://www.facebook.com/pages/I-Wish-I-was-Home-Productions/176321852397752 Keek: https://www.keek.com/cpine

 

Woodturning With Naked Turner Finished Lamp Project
By: Erik Anderson
July 09, 2013 · 1,958 views

Wood Turning Photos

 

Antonio De Gaetano - Project lamp in segmented
By: Anto Dega Wood
April 21, 2013 · 980 views

Legno: Carpino,Mogano Curupay

 

WoodTurning - Project turning a LAMP
By: Confusion Wood
February 19, 2013 · 13,837 views

WoodTurning Project turning a LAMP http://www.youtube.com/ConfusionWood wood: elm and ash

 

woodturning a storm lamp candle by Rolf Eibl
By: Spanof Wood
December 15, 2012 · 565 views

Watch in fast motion how an strom lamp candle is turned out of wood. HAVE FUN!

 

woodturning hanging storm lamp candle by Rolf Eibl
By: Spanof Wood
December 15, 2012 · 1,904 views

Watch in fast motion how an hanging strom lamp candle is turned out of wood. HAVE FUN!

 

Lumen et lux
By: Livio Maritati
December 29, 2011 · 2,162 views

Raccolta di opere al tornio in legno di ulivo: lumi, calici e patene.

 

Woodturning A Segmented Lamp.wmv
By: tnturner22
November 03, 2011 · 118,089 views

A segmented lamp made from walnut and maple. This lamp contains a solid base and top with 21 segmented rings. A total of 506 pieces.

 

Woodturning
By: Declan Horan
March 07, 2011 · 779 views

Woodturned Lamp - Textured, Ebonised with Indian Ink and highlighted with Turquoise stone.

 

Woodturning Turning A Lamp
By: Carl Jacobson
April 28, 2010 · 54,275 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. In this video I turned a lamp on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - - #woodturning #woodturning #woodlathe #woodturningprojects #carljacobson

 

Woodturning Turning a Lamp
By: Carl Jacobson
April 28, 2010 · 12,524 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - - #woodturning #woodturning #woodlathe #woodturningprojects #carljacobson

 

Candelabro descentrado Video 1 de 3
By: Arte en Torno
April 18, 2010 · 3,353 views

Torno longitudinal, entre dos puntos. Cualquier información adicional comuniquese al e.mail. arteentorno@hotmail.com victoracheagos@hotmail.com Con gusto le atenderemos.

 

Return to Turning Videos

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

From Walnut to Antlers
Robust Tools
Woodpeckers

(Click any Ad to go to our Sponsor's Website)