Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Lids Videos (74)

Sort by

Or click here to: Search All Videos


R17 - Lidded Box - Jerry Measimer - 5MAY2009
By: Waxhaw Woodturners
February 23, 2016 · 345 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

#48 Mulberry Lidded Hollow Form Part 2
By: Yuval Lahav Woodturning
February 14, 2016 · 27,849 views

Finally I took the time to finish the Mulberry vessel I started a couple of months ago (https://www.youtube.com/watch?v Ex5G8d5LnCM), but that is just like it is, sometimes you Mulberry right a way, and sometimes it waits for the right time. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Jeffrey Philip Nelson - Shame On Me MC Cullah - Lucy All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Naked Turner Hairy Oak Inlay On Canister Lid
By: Erik Anderson
February 13, 2016 · 1,423 views

I show how to do an endgrain inlay of Hairy Oak in a maple canister.

 

Completing a Rough-Turned Lidded Box: Woodturning with Sam angelo
By: WYOMINGWOODTURNER
February 12, 2016 · 8,431 views

Sam completes a lidded box that was first rough-turned. After a period to allow for drying, he puts the lid and base back on the lathe to finish the project.

 

Blackwood & Holly Box Lid Detail: The Finial Part II with Sam Angelo
By: WYOMINGWOODTURNER
January 31, 2016 · 5,177 views

In this video, Sam continues detailing the holly lid in his Crab Apple box. He shows the step necessary for joining the finial to the lid. (Part I: https://www.youtube.com/watch?v OBbO5MLiD34)

 

Blackwood & Holly Box Lid Detail: Part I with Sam Angelo
By: WYOMINGWOODTURNER
January 25, 2016 · 6,812 views

In this video, Sam covers the steps in combining a blackwood insert into the Holly lid of a box: Part 1. In part 2 Sam will cover the making of a finial/handle for the lid.

 

Wood Turned A Small Lidded Box
By: Peter Mitchell
January 22, 2016 · 547 views

Hi all i am just submitting my first project video of 2016 i hope you like it. A Small Lidded Box i would like to know what editing programs other people use. I have just spent nearly all day editing this one it was 1hr 1/2 long i got it down to 20 odd minutes. I use Windows movie maker it isn't bad and i am not brilliant with it but i get by. My internet is rubbish as well it is going to take 143 minutes .

 

Woodturning at 54a.#58 The Ash Collection #4 A Lidded Box
By: Keith Barrow
January 21, 2016 · 13,373 views

No.4 in the Ash Collection. Here's the link to Alan Edwards Youtube channel. https://www.youtube.com/channel/UC6u4V2Nn-EBaiRHg6JKFmkw

 

Woodturners Journal: Sycamore Lidded Box
By: Woodturners Journal
January 15, 2016 · 223,229 views

Jerrod turns a Sycamore wood box with a lid on the lathe. jerrod.toth@woodturnersjournal.com the Shop: http://woodturnersjournal.com/ https://www.facebook.com/groups/1437251519906713

 

Resin and Maple Burl Lidded Box by Sam Angelo
By: WYOMINGWOODTURNER
January 12, 2016 · 152,343 views

Sam carries on a tradition with his granddaughter. After a visit to the Vegas' Woodworker's Emporium Sam turns a resin/Maple Burl lidded box. ...Lots of good information and video footage in this one.

 

woodturning # 21 lidded hollow form
By: Woodslee Summercraft
December 24, 2015 · 2,517 views

I turned this hollow form a couple of weeks ago, a christmas gift for my mum, the lid was made by my dad many moons ago and set aside for who knows what, so I like to think that this christmas my Dad and I made this for you Mum. X

 

#40 Mulberry Lidded Hollow Form Part 1
By: Yuval Lahav Woodturning
November 28, 2015 · 3,476 views

Turning a hollow form always presents a challenge, but this time it was not just the form, but the machine that failed me. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Jerry Paul - Mars Sunset and Mr Mrs Smith - Even Angels Bite the Dust Which is available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Oak natural edge lidded box by Al Furtado
By: Al Furtado Rebel Turner
November 27, 2015 · 2,500 views

Just finished this Oak natural edge lidded box Wood was dry and hard as a rock hardest wood I have had to cut on the lathe

 

Wood turning Banyan Lidded Vesel
By: Al Furtado Rebel Turner
November 21, 2015 · 1,008 views

Hot off the lathe. Banyan base, maple lid, ebony finial

 

Hidden lid Mango box Wood turning
By: Al Furtado Rebel Turner
November 15, 2015 · 2,662 views

Mango Box with hidden lid. In this turning I show a quick turning of a mango box with a lid that is almost undetectable as to where it opens and an easy way to size it.

 

Cast Resin Box (threaded Lid) Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
November 14, 2015 · 67,464 views

Sam completes a lidded box of Cast resin. The blank was supplied by Zac Higgins @NVWoodwerks. Turning and sanding alternative materials is a challenge but the results are well worth it.

 

Video 10 Making a small lidded box
By: Harry’s Woodcraft
October 25, 2015 · 984 views

A small lidded box made from a piece of cherry Music Intro Humidity - Silent Partner, Thank you for watching Please like, share and subscribe George Watkins https://www.youtube.com/watch?v bEz_QgZrCi8&index 21&list WL Mike Waldt https://www.youtube.com/user/TheCymruBoy/featured

 

Wood Turning A Lid For The Winged Maple Box (with bonus FAIL footage!)
By: Jerry Paul
September 10, 2015 · 1,621 views

I've finally posted the video for the lid for my winged box that I made for the finial in the previous video... If that makes sense... (?) First I made a finial. I thought it deserved a nice box, so I made a nice winged box. I then needed a lid for the finial to sit on. I made the box from some mountain ash... and then... FAIL! ... lol... but I recovered. I can't imagine this has happened to anyone else. ;) ... (?)

 

Naked Turner Maple Canister With Zebra Wood Inlay Lid
By: Erik Anderson
September 07, 2015 · 1,902 views

Quick video of a maple canister with zebra wood inlay on the lid.

 

2015 RMWT Symposium -- Working on Design of lidded boxes
By: WYOMINGWOODTURNER
September 05, 2015 · 8,071 views

As Sam prepares to demonstrate at the 2015 Rocky Mountain Woodturning Symposium he works on the design of several lidded boxes. (He does not show the process of making a lidded box, only the shape and form on the outside).

 

woodturning - how to roughout a lidded box
By: George Watkins
September 04, 2015 · 4,067 views

In this video I talk about and demonstrate the importance of rough turning when making a turned box.

 

How To Naked Turner Rectangular Sapelle Follow Up Lid and Finial
By: Erik Anderson
August 16, 2015 · 3,033 views

I finish this off center piece with a Japanese Pagoda style Maple lid and Ebony finial

 

A perfect size lid every time by Al Furtado
By: Al Furtado Rebel Turner
August 13, 2015 · 10,829 views

A perfect size lid every time without using calipers or any measuring tools Sorry I lost the footage on finishing the lid and the finial but this is just to show a way to get a good measurement the first time

 

Off Center Lidded Box (Using double-stick tape for a chuck) Sam Angelo
By: WYOMINGWOODTURNER
August 05, 2015 · 6,969 views

Sam turns an off center lidded box with a tapered lid. He uses double-stick tape to attach the box to a wast block. A must see video.

 

#23 Lidded Vessel
By: Yuval Lahav Woodturning
July 10, 2015 · 11,554 views

The hardest thing I've ever turned, a Cindy Drozda inspired lidded vessel, and Wow, was that a tough one... Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Cindy Drozda web site - http://www.cindydrozda.com/ Songs in this video are: Brett Saxon - Atavistic Montana Skies - Tunnels Swear and Shake - Suddenly Pierce Murphy - Versailles Ryan Little - Get Up All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Dome Lidded Box by Al Furtado
By: Al Furtado Rebel Turner
July 08, 2015 · 2,586 views

I made a dome lidded box and also a new intro to my videos Please let me know what you think of the new intro. This should be very interesting for future videos as each one has to be customized to each video.

 

Natural Edge Bowl - Part 3 - Lid & Finial
By: Gord Rock
June 30, 2015 · 3,346 views

Part 3 of a series of 4 on turning a Natural Edge Bowl with a pedestal & a lid with a finial. Part 1 can be found here: https://youtu.be/MNESZIGrUSc Part 2 can be found here: https://youtu.be/9SPm3vNoQ20 Part 4 is available here: https://youtu.be/RdGx4KVkW6s

 

Woodturning - box #8 - small beaded lid box
By: Marc 's Oneway of turning
May 19, 2015 · 1,902 views

Small lidded box #8 - see my patio construction here: https://www.youtube.com/watch?v KOHgiw5sNXc thanks for watching. Marc

 

Woodturning - A Lidded Box with Finial from Ash
By: Mike Waldt
May 14, 2015 · 28,638 views

I turn a lidded box and finial from Ash. Guitar by Michael Berke Michael's Channel : https://www.youtube.com/user/mikeberk810 Ed Krystosek's Channel : https://www.youtube.com/channel/UCaCIThaORRiodf9vuMjcn6A Yuval Lahav's Channel : https://www.youtube.com/user/yuvallahav Dipa Das's Channel : https://www.youtube.com/user/DipaSwarupa

 

Tight lidded urn
By: Jerry Paul
May 01, 2015 · 360 views

I was cutting a blank out of a chunk of elm that I've had for about a year, and it turned into something pretty nice. :)

 

Woodturning at 54a #2 A lidded box
By: Keith Barrow
April 17, 2015 · 1,740 views

Description

 

Turning A Lid For A Kitchen Pail
By: Gord Rock
April 08, 2015 · 2,408 views

Turning a lid to fit a pail which is used to collect kitchen scraps to take to the compost bin.

 

The Blind Wood Turner - Episode 25 - A Lidded Ash Box
By: Blind Woodturner
April 03, 2015 · 1,607 views

In this episode, The Blind Wood Turner has his first attempt at a lidded box made from ash.

 

Turning a lid and finial for a Banyan tree box by Al Furtado
By: Al Furtado Rebel Turner
April 02, 2015 · 8,746 views

I decided to show the turning of a Cherry lid and finial to fit my Banyan tree box/ hollow vessel that was mounted and turned on my lathe as I was venturing into the beauty of the Banyan tree

 

Woodturning: Oak Coffee Cup Lid
By: Roundabout Woodworks
March 20, 2015 · 16,983 views

I turn a coffee cup lid from a limb of an oak tree.

 

Woodturning a Lidded Cedar Box
By: Ed Krystosek
March 04, 2015 · 919 views

Step by step how I turned a lidded box from a cedar post. Check out these other YouTube vids on turning a lidded box...I recieved a lot of good info from these guys. Mike Waldt https://www.youtube.com/watch?v nlTLHITalTE https://www.youtube.com/watch?v MawbZoch1WE https://www.youtube.com/watch?v iPKqjP2ntQc Carl Jacobson https://www.youtube.com/watch?v dAqjnnlfUY0 https://www.youtube.com/watch?v 0SXVMs3lLos Wyoming Wood Turner https://www.youtube.com/watch?v FCK7M4Uy2Dk https://www.youtube.com/watch?v HzN9TgsfcOo Tom Stratton https://www.youtube.com/watch?v uW4eeTKB47I Gwinnett Wood Workers https://www.youtube.com/watch?v ONWRtkiEIZU Bob Hamilton https://www.youtube.com/watch?v ijZ8Ph8KWcw

 

Woodturning a Small Wood Lidded Box With an Inlay
By: Ed Krystosek
March 02, 2015 · 965 views

My second attempt at a turning project. A small lidded box with metallic thread inlay. This stuff is a hoot... Tony Barfoot does a show and tell on how to inlay a wire in a bowl which is where I got the idea...link below. http://youtu.be/6J828cRAcpw

 

A Thread in Time
By: WYOMINGWOODTURNER
December 14, 2014 · 3,937 views

Sam completes the lid of a box with a threaded 'handle.' ...And says Happy Anniversary to his Wife....

 

Woodturning Oak & Maple Slice Lidded bowl start to finish! By Boston Woodturning 2014
By: Boston Woodturning
December 06, 2014 · 90 views

Woodturning Oak & Maple Slice Lidded bowl start to finish! By Boston Woodturning 2014

 

#12 Elm Lidded Box - Wood Turning - Acolyte Turner
By: Tom Stratton
October 29, 2014 · 3,645 views

Video #12. An Elm lidded box, just in time for Halloween! In this project I turn a medium sized box from Wych Elm, a European Native wood. For the first time I try 'wet' sanding and use a Robert Sorby hollowing tool (RS200KT). My previous video: http://youtu.be/YnbxLOXNV0Q Further projects, turnings and information can be found at http://tomturns.com Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where explicitly stated. All brand and product names are trademarks or registered trademarks of their respective companies and are hereby acknowledged. CHANNEL TAGS Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Hollow Form Elm Pot Pourri Pot Pourri Holder Carbide Carbide Tools Carbide Turning Tools RS200KT

 

Adding a Lid to a Hollow Form: Woodturning
By: WYOMINGWOODTURNER
October 27, 2014 · 3,642 views

Sam Angelo ads a lid to a hollow for which transforms it into a burial urn.

 

NOVA Infinity - Lidded Vessel Contest
By: The Walnut Log Studio
October 27, 2014 · 629 views

#NOVAInfinityContest #NOVAInfinity submission video!! Quick entry for this challenge. I turn a lidded vessel from Walnut and a mystery wood.

 

Maple Burl Box with Threaded Lid - Part 2
By: Gord Rock
October 17, 2014 · 2,045 views

Making a Box from a Maple Burl and giving it a threaded lid. This was a real learning experience as some things didn't work out and I had to devise a new method of holding a piece to be turned. I learned from my mistakes and maybe you can learn not to make the mistakes I made. This is Part 2 of 2 parts.

 

Maple Burl Box with Threaded Lid - Part 1
By: Gord Rock
October 17, 2014 · 4,446 views

Making a Box from a Maple Burl and giving it a threaded lid. This was a real learning experience as some things didn't work out and I had to devise a new method of holding a piece to be turned. I learned from my mistakes and maybe you can learn not to make the mistakes I made. This is Part 1 of 2 parts.

 

Preparing an inlay for a Lidded Box: woodturning
By: WYOMINGWOODTURNER
September 27, 2014 · 2,523 views

Sam demonstrates how to cut an inlay or insert for a lidded box. He shows how considering grain orientation will result two different types of 'figure.'

 

Inlay for a Lidded box: Woodturning
By: WYOMINGWOODTURNER
September 25, 2014 · 23,443 views

Sam Angelo demonstrates the process for inlaying a contrasting wood into the lid of a turned box. A cocobolo inlay is used in a Big Leaf Maple box.

 

Woodturning With Naked Turner Winged Lidded Box With Finial
By: Erik Anderson
September 04, 2014 · 29,222 views

Winged Lidded Box with Ebony Finial

 

Rough Turning a Lidded Box: woodturning
By: WYOMINGWOODTURNER
July 24, 2014 · 2,549 views

Sam demonstrates how a box blank of wet wood is rough-turned to be set aside to dry for later turning.

 

Naked Turner Turns 3 Axis Footed and Lidded Vessel
By: Erik Anderson
June 29, 2014 · 2,219 views

This was inspired by RobbieTheWoodTurner and his three axis turnings.

 

Formaggiera
By: Mauro il tornitore
April 23, 2014 · 297 views

Come ho realizzato il tappo di una formaggiera. How I made the cap of a parmesan container

 

#30 Woodturning a Lidded Box from Brazilian Cherry Part 2
By: Stephen Ogle
April 02, 2014 · 32,608 views

Part 2of 2 Completion of my Lidded Box from Brazilian Cherry. Check out Bob Hamilton's Mahogany Box. Part 1. https://www.youtube.com/watch?v 7gHRNV258x0

 

#29 Woodturning a Lidded Box from Brazilian Cherry Part 1
By: Stephen Ogle
April 02, 2014 · 82,844 views

A friend in Tampa FL sent me a package of Brazilian Cherry and I decided to make a lidded box from it. This is the first part of two.

 

Wood Turning #55 Alder Lid for an Alder Bowl
By: The Tiny Trailer Workshop
March 11, 2014 · 1,187 views

The bowl in #54 needed a lid so I found another piece of Alder and after a couple of tires came up with this effort. Interesting working on the side of a piece of wood and it did present some problems when it came to turning it around too! I had thought to just turn it around on the screw chuck but the bark got in the way! But after some trial and error... I managed to get pretty much what I was looking for. Hope you enjoy Thanks for watching Larry

 

Wood Turning - Beginners Guide #2 - A Lidded Box
By: Mike Waldt
February 12, 2014 · 1,058,827 views

In the second of the Beginners Guide series I show you one of the methods I use to turn a simple lidded box from Sapele, sent to me by Tom Scandian, thanks Tom.

 

Beads of Courage lidded box
By: Jtcturning
January 08, 2014 · 671 views

Turning a Beads of Courage storage box Mahogany, Eucalyptus, African Blackwood October 2013 Jason Clark

 

Black Palm no-spigot, lidded box/woodturning
By: WYOMINGWOODTURNER
October 31, 2013 · 11,909 views

Sam turns a slip-fit box in Black Palm. He employs a technique in which he does not use a spigot to hold the blank in the chuck. He also shows his tricks for turning a lidded box.

 

Wood Turning - A Lidded Box in Sycamore
By: Mike Waldt
September 10, 2013 · 31,376 views

I turn a lidded box from Sycamore with a finial of African Blackwood

 

cool lidded box
By: Walter Wager
August 20, 2013 · 41,356 views

A shorter, more interesting video on making a lidded box

 

Walt's lidded box video
By: Walter Wager
August 08, 2013 · 4,152 views

Woodturning demo of turning a lidded box - mostly real time

 

Making Lidded Boxes
By: DentonTurners
August 07, 2013 · 10,638 views

Neal Brand shows us the process of making a lidded box on the Lathe. He demonstrates methods for end-grain boxes and also discusses different ways to fit the lid. This demo was presented during the July 2013 meeting of the Golden Triangle Woodturners. We are a Denton, Texas based club which meets on the first Monday of the month. Find more about us at the club website www.goldentrianglewoodturners.org

 

# 177 pierced Thru lid
By: Cap'n Eddie Castelin
July 15, 2013 · 4,463 views

This technique was perfected by Hans Weissflogg of Germany. This is one of my early tries and you get to share in my heartbreak. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Wood Turning - Lidded Box in Pippy Yew
By: Mike Waldt
June 06, 2013 · 28,286 views

I turn a lidded box from some beautifully figured 'Pippy' Yew. Sent to me by Alan Simpson, thank you Alan.

 

Turned Box with Threaded Lid and Finial part 2
By: WYOMINGWOODTURNER
February 28, 2013 · 3,413 views

In part 2 of this project, Sam Angelo finishes threading and turning a blackwood finial with left hand threads. With left hand threads on the finial, he turns it with the lathe spinning in reverse.

 

Wood Turning - A Spalted Beech Lidded Box
By: Mike Waldt
January 27, 2013 · 111,801 views

I try to demonstrate another method of turning a lidded box, that enables you to get the grain on the lid and body of the box to align quite closely.

 

Mahogany box 2: Turning lid and design opportunity
By: Bob Hamilton
January 19, 2013 · 15,795 views

This video was recorded in September, 2011. I just never got around to editing and uploading it then. It is a small decorative box made from mahogany with an ebony finial due to a 'design opportunity'. There are 5 segments with a total run time of about 94 minutes.

 

Mahogany box 1: Inside of lid and spigot
By: Bob Hamilton
January 19, 2013 · 34,746 views

This video was recorded in September, 2011. I just never got around to editing and uploading it then. It is a small decorative box made from mahogany with an ebony finial due to a 'design opportunity'. There are 5 segments with a total run time of about 94 minutes.

 

Wood Turning - A Lidded Box
By: Mike Waldt
December 17, 2012 · 6,785 views

A simple lidded box turned from a piece of Oak Burl. PLEASE NOTE: The music had to be deleted due to copyright :(

 

Turning A LIDDED BURL BOX
By: WYOMINGWOODTURNER
November 02, 2012 · 51,789 views

Sam takes you through the steps of making a lidded box on the wood lathe. This process shows also how to 'jam-fit' the lid and base of the box.

 

120 Small Screw lid
By: Cap'n Eddie Castelin
March 16, 2012 · 18,885 views

A small screw jar with metal threads purchased from Lee Valley. Simple but elegant project, perfect for a gift.

 

Woodturning a Hollow Olivewood Egg with a Lid
By: Jake Gevorgian
August 21, 2011 · 2,546 views

This hollow egg shaped lidded vessel is made with Olivewood. The finishing material is just a bees wax. There is a blog for this video -- http://paloarte.wordpress.com/2011/08/22/woodturning-a-hollow-olivewood-egg-with-a-lid

 

71 fitted lid on lathezilla.avi
By: Cap'n Eddie Castelin
March 29, 2011 · 3,550 views

I turn a box lid and insert on an ornamental lathe, Lathezilla. The how and why you make the settings you do for a great fitting lid. Plans are available at www.eddiecastelin.com

 

tightlid51.avi
By: Cap'n Eddie Castelin
November 04, 2010 · 7,184 views

Tighten up that lin on a turned jar, with a little help from a 1.00 'O' Ring and a special tool.

 

turning a lid video
By: 5thdensityturner
September 28, 2010 · 612 views

 

Turned Wooden Mug Cover
By: Cap'n Eddie Castelin
February 08, 2009 · 20,724 views

Turn a wood mug liner for a Wal-Mart Tumbler. It cost under 4.00 and works as well as the 10.00 version from Woodcraft Stores

 

Return to Turning Videos

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

From Walnut to Antlers
Woodturning Tool Store
Woodturning with Tim

(Click any Ad to go to our Sponsor's Website)