Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Mallets Videos (82)

Sort by

Or click here to: Search All Videos


Woodturning - Turns Metal into Hammer / Transformando metal em martelo
By: Odair Lucas Lucas
November 05, 2019 · 3,505 views

materiais. metal madeira

 

Woodturning a Mallet from Lignum Vitae and Leadwood.
By: tfturning
October 16, 2019 · 232 views

Back in May I turned this little mallet on the lathe from Leadwood but I always felt it needed something more, then this block of Lignum Vitae popped up and it seemed a perfect combination of tough woods for a super mallet. Once turned and sanded to 500 grit a couple coatings of Danish oil were applied for the finish. Please like and subscribe for more, Thanks.

 

Mallet on two lathes - Woodturning
By: Second life of wood-turning
September 19, 2019 · 130 views

This project I made on two lathes becouse I would like to join two stages in my woodturning adventure. It was big step in my life and I decide to create something which will remind me about my first lathe. I have used an apple wood and resin with metallic copper dye.

 

#72 - Awesome DIY Turned Carver's Mallet - How I did it
By: Billy Burt
September 12, 2019 · 330 views

In this episode I turn a carver's mallet from Texas Ebony and figured Bocote. This mallet should serve me well for many years. Watch to see how I did it. Since both woods are naturally oily, I finished it with a wax/oil combination. Thanks for watching. Please Like, Subscribe and Share. You can support the Messy Studio by visiting my web site and purchasing merchandise, or follow the link to my Amazon store. You get the same great value, but Amazon sends me a few cents for every purchase. Thanks! Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com https://acdcreations.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ Ack's Abrasive Paste https://ackswoodpaste.com If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://acdcreations.com/shop/ #DIYcarversmallet #turnedcarversmallet #howtoturnacraversmallet

 

Wood Turning a Tiny Carving Mallet: Beginner Woodturning Project
By: Cook Woodworks
September 06, 2019 · 587 views

I tried to woodturn something small and fun out of some imbuia wood my friend gave me. It's not the most practical woodworking project, but it was fun beginner practice, and hopefully it will help when I wood turn a full size mallet in the future. What is this, a mallet for ANTS?!?! My tools: Jet Lathe: https://amzn.to/2NSotba Carbide Chisels: https://amzn.to/2NUiEdq Nova Chuck: https://amzn.to/32tJvkm Face Shield: https://amzn.to/2Ac4Cvj Respirator: https://amzn.to/2N7mxfm Miter Saw: https://amzn.to/2ZpjuBW Drill: https://amzn.to/2XtnW0G Square: https://amzn.to/2VaCNzW Clamps: https://amzn.to/2UvPSiZ #woodturning #woodworking

 

Replica Granada de Palo DE UTILERIA
By: TORNEANDO MADERA CON MARIO CANTARUTTI
August 04, 2019 · 2,597 views

 

Harbor Freight Hammer Hack
By: George Fotinakes
July 25, 2019 · 271 views

You can turn a 5.20 Harbor Freight hammer into a showpiece tool with a little lathe work.

 

DIY Custom Red Oak Mallet
By: Mountain View Turning
July 13, 2019 · 151 views

Red Oak Mallet

 

Turning a shop use mallet
By: Random Turning
July 09, 2019 · 8 views

Turning a mallet with an oak head and podocarpus handle. music: 'Summer' from bensound.com

 

Woodturning an Olive wood Carving Mallet
By: Tim Mills woodturner.
July 04, 2019 · 64 views

This video is about Woodturning an Olive wood Carving Mallet for my friend Terri who has taken up carving spoons

 

Woodturning - Turning A Bowling Pin Into A Mallet
By: Carl Jacobson
May 18, 2019 · 117,040 views

I had so much fun with the bowling balls, thought I'd make something with a bowling pin. I've turned quite a few pin years ago, but they had Maple centers. The new pins are synthetic easy to turn, but not a lot of thing you can do with them. YOU CAN ALSO FIND ME: https://www.etsy.com/shop/Thewoodshoptv http://www.thewoodshop.tv/ https://www.instagram.com/thewoodshop.tv/?hl en https://www.facebook.com/thewoodshoptv/ I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.

 

Quick and easy wood mallet
By: Rons Woodturning shop
April 05, 2019 · 745 views

A short project making a mallet. Not sure what kind of wood it is but it is dense and solid.

 

Woodturning a Carving Mallet From a Bowling Bowl
By: John Clothier
March 31, 2019 · 1,641 views

In this project video I show you how I woodturned a carving mallet from an old lignum vite bowling bowl with an ash handle. John Clothier is proudly supported by Record Power - Woodworking machines and tools https://www.recordpower.co.uk/ Hampshire Sheen - for finishing products https://www.hampshiresheen.com/ House of Resin - for Resin http://houseofresin.co.uk/ Yorkshire Grit - for Abrasive Paste http://yorkshire-grit.com/ Dont forget to visit my other social media: Website - https://www.johnclothier.co.uk Instagram - https://www.instagram.com/JohnClothierUK/ Facebook - https://www.facebook.com/JohnClothierUK/ Twitter - https://twitter.com/JohnClothierUK John Clothier is a proud member of Small Workshop YouTube Makers group on Facebook https://www.facebook.com/groups/109030066480071/ Makers Media Network http://makersmedianetwork.com/ The Association of Woodturners of Great Britain https://www.awgb.co.uk

 

Woodturning a chisel mallet
By: Epop's Woodturning Studio
March 29, 2019 · 53 views

 

Bossing It
By: Torbay Timber Twirler
March 09, 2019 · 49 views

Hello Well I’m making a bossing mallet today, A What I hear You Cry, no oh well I’ve made one any way, it’s a car body work tool used for shaping curves and hollows in metal plate used in conjunction with a sand bag. I am restoring an old car and needed it to create some panels etc. https://www.youtube.com/watch?v Clp8k5_AZHE IT & Tech https://www.youtube.com/watch?v hxIP6J4uiPc Slave to the Lathe https://www.youtube.com/watch?v HBjQn2vTd5o&t 600s Mike Waldt https://www.youtube.com/channel/UCDQz4H7tz6Fwu5_5rg4W6pA Andy Phillip https://www.youtube.com/watch?v taJbBmcaAZQ Capt’n

 

Make Yourself a Wood Mallet!
By: Phil Anderson - Shady Acres Woodshop
January 17, 2019 · 3,072 views

Just a simple, quick turning of a useful tool. Make them as gifts, to sell and even keep one for yourself! Please Like, Share and Subscribe if you are so inclined. Shop Page: https://www.facebook.com/Phils-Woodshop-1470648929819551

 

Woodturning a mallet
By: René Haack
December 08, 2018 · 53 views

Making a wooden mallet out of scrap wood. It's already in the mail to the UK. Merry Christmas, Nick! Your tools are awesome! Nick s channel: https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA

 

St Ignace Demo
By: Hiawatha Woodturning Club
November 08, 2018 · 41 views

Steve Promo demonstrates turning a carving mallet to students of the Saint Ignace MI, Lasalle High School

 

St Ignace High School Mallet Demo
By: Hiawatha Woodturning Club
November 07, 2018 · 8 views

Steve Promo demonstrates how to turn a carving mallet to a St Ignace High School Class

 

Carvers Mallet from Oak
By: Mike Schienle
October 14, 2018 · 74 views

Turning an Oak Carvers Mallet Website - https://windridgewoodcrafts.com Facebook - https://www.facebook.com/WindRidgeWoodCrafts/ Turncrafter Commander 12' Variable Speed Lathe - https://www.pennstateind.com/store/KWL-1218VS.html Blackline Tools - https://localwoodwork.com/blackline-tools-1 I use Midi handle with Round, Square, V and W cutters 5 Roll Sandpaper Set - http://www.woodturningz.com/5-Roll-Sandpaper-Set Micro-Mesh Pen Finishing Pads - https://www.woodturnerscatalog.com/p/18/2459/Micro-Surface-Pen-Finishing-Pads-9-Piece-Set Micro-Mesh Holder - https://revolutionblanks.com/collections/accessories/products/micro-mesh-holder Pen Kits - https://www.bereahardwoods.com/pen-kit/supplies/pen-kits.html Pen Blanks - https://www.exoticblanks.com/Pen-Blanks

 

Carver's Mallet from Maple Log
By: Mike Schienle
October 04, 2018 · 43 views

Turning a Carver's Mallet from a Maple Log Website - https://windridgewoodcrafts.com Facebook - https://www.facebook.com/WindRidgeWoodCrafts/ Turncrafter Commander 12' Variable Speed Lathe - https://www.pennstateind.com/store/KWL-1218VS.html Blackline Tools - https://localwoodwork.com/blackline-tools-1 I use Midi handle with Round, Square, V and W cutters 5 Roll Sandpaper Set - http://www.woodturningz.com/5-Roll-Sandpaper-Set Micro-Mesh Pen Finishing Pads - https://www.woodturnerscatalog.com/p/18/2459/Micro-Surface-Pen-Finishing-Pads-9-Piece-Set Micro-Mesh Holder - https://revolutionblanks.com/collections/accessories/products/micro-mesh-holder Pen Kits - https://www.bereahardwoods.com/pen-kit/supplies/pen-kits.html Pen Blanks - https://www.exoticblanks.com/Pen-Blanks

 

Making a Mallet with Traditional Tools
By: Pat Lap - Le PicBois
August 03, 2018 · 4,352 views

. . ' : https://youtu.be/bAXFdRCLwQM : http://www.leevalley.com/en/home/even... : Email: lbtourneur@gmail.com Phone: (819) 682-0707 ____________________________________________

 

Carver's Mallet from a Crown Green Bowling Ball
By: Wood Club UK
July 25, 2018 · 426 views

In this video, Wood Club UK admin team member Mark Chapnell shows you how he turns his carver's mallets from Crown Green Bowling Balls. If you like this video please click like, leave a comment and subscribe to this channel. If you would like to join the Wood Club UK family then click on this link to head over to Facebook and join us: https://www.facebook.com/groups/316701195463845

 

woodturning: carvers mallet
By: Guil The Bearded Woodworker
June 21, 2018 · 486 views

black butt a nice hard dense wood great for a mallet. this one is going to Ondrey Nedoma woodworking. He is one of my earliest non family or friend subscriber. love his videos and thought he would use it more than me go and check him out. https://www.youtube.com/channel/UCqQMawRt5xS9lw65o2kKDKg www.instagram.com/guilthebeardedwoodworker/ SEND ME YOUR STICKERS, OR SEND ME A BLANK OR WHATEVER: 'Guil Noronha the bearded woodworker' po box 353 Maitland, NSW, Australia 2320

 

Make Wooden Mallets // Joiners Mallet // Carvers Mallet
By: Jake Thompson
April 15, 2018 · 1,015 views

Make Wooden Mallets // Joiners Mallet // Carvers Mallet. Today I made 2 styles of wood Mallets. Mahogany, Cherry, and Walnut are the woods I used. One style is a carvers mallet, the second style is a joiners mallet. I made these with limited tools. Anyone can do this project regardless of tools or skill set. I've been Needing to make at least one Mallet for a long time now. I wish I would have made one sooner. I was given the piece of Mahogany from my friend Bigscreen Bird. Here is a link to his Channel. https://www.youtube.com/channel/UCnvdlbUfDZVluBPUCXJxjpA Jay's Video https://www.youtub

 

Lathe-Turned Apple Wood Shop Mallet with Sam Angelo the WYOMINGWOODTURNER
By: WYOMINGWOODTURNER
March 04, 2018 · 13,302 views

In this project Sam makes a shop mallet using apple wood. It is a simple spindle turning project turned totally between centers. A good project for every turner not matter the skill level. Please find my work on these sites: www.wyomingwoodturner.com www.samangelo.com https://www.etsy.com/shop/wyomingwoodturnercom

 

Woodturning with Tim Yoder-Dead Blow Mallet
By: woodturningwithtim1
January 22, 2018 · 37,013 views

Tim makes his own dead blow mallet using a 3/4' T-pipe fitting. The handle and mallet ends are threaded to fit into the pipe fitting. Tim shows you two ways to make the threads. First he creates his own 14tpi thread chaser and later he uses a piece of pipe to make a thread cutter. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Oak & Walnut Mallet
By: Asgard Woodturning
January 21, 2018 · 255 views

Oak & Walnut Mallet Made with a little help from Faolán I used some wax provided by Claire from out of the woods - please check out her channel. https://www.youtube.com/channel/UCAvLG8lXS55HsLMYCQ5J8JA

 

Woodturning a Mallet - How NOT To Do It
By: Jason Lowrie
January 07, 2018 · 1,954 views

This just proves that starting with a plan often ends with better results. Its not very noticeable, but the handle is slightly off-center from the mallet head. If you try this project, you’ll have better results if you pre-drill, and do everything different than me. The end result… you can still whack things with it. YouTube is a great resource for woodturners. If you're looking to make your own mallet, or procrastinating from taking out the trash, check out the videos below. Frank Howarth https://www.youtube.com/watch?v kV1jKCKoPAo DIResta https://www.youtube.com/watch?v DEdjR90DL3c Carl Jacobson https://www.youtube.com/watch?v xL9QV--f4CY

 

Wood Shop Mallet DIY
By: George Fotinakes
November 19, 2017 · 170 views

Step by step demonstration of how to make a shop mallet with a wood lathe and a few tricks.

 

Woodturning a Wood Gavel Head
By: Sears Woodturning
November 18, 2017 · 83 views

sorry here is the lost footage

 

Making a Quick & Dirty Walnut Mallet
By: Pat Lap - Le PicBois
October 20, 2017 · 2,351 views

I wanted to try my new Intro/Outro graphics but didn't want to make a good video. So here it is! ;) Seriously I made this one for my father who needed a light mallet for his gun bullets making stuff. Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois _____________________________________ My other channels: • QUADCOPTUBE: https://www.youtube.com/channel/UC12MU4NiK8bPrAl

 

Mallet from Marri and Silky Oak
By: Fatso's Workshop
October 05, 2017 · 153 views

I made up this mallet for one of the guys at the Men's Shed I volunteer at, he asked me for one a while back but I was a bit slack and I've just gotten around to it. This one is made up of Marri (Corymbia calophylla), a bloodwood from West Australia that is a b it left over from the deck I built just outside the shed, an offcut of Silky Oak (Cardwellia sublimis) from Queensland and the handle is Blackbutt (Eucalyptus pilularis) from NSW. From memory the Blackbutt came from the scrap box at the timber yard I usually buy my wood from. It's a simple enough mallet, made in the style that other

 

Dead Blow Mallet
By: Turntastic Wood Designs
August 05, 2017 · 398 views

A dead blow mallet with steel rings around the ends of the head.

 

Woodturning - The Carving Mallet
By: Andy Phillip
July 21, 2017 · 16,280 views

Turning a Mallet using olive / sapele with lead insert my etsy & Instagram links https://www.etsy.com/uk/shop/AndyPhillipHandmade? https://www.instagram.com/andyphillip_/ DISCLAIMER : My videos are for entertainment purposes only. When using any tools/machinery always read & understand manufacturer's guidelines & safety instructions. The methods I use may not be the safest, so please be responsible for your own safety ...

 

Woodturning Pounding Hammer for PressTube
By: Pat Lap - Le PicBois
July 14, 2017 · 6,616 views

[ Recently I collaborated with Ben from PressTube and I noticed that one of the tools he worked with was very ugly. So I decided to make him a prettier one! Take a look at his channel: https://www.youtube.com/channel/UCZ3vyIYUy5yK0i-RJwpdoSg ] This video is made possible by RZ MASK • BUY HERE: http://lepicbois.net/rzmask • GET 15% OFF WITH THIS COUPON CODE: LPB15 _____________________________________________ GIVEAWAY LINK: http://lepicbois.net/rzmaskgiveaway _____________________________________________ Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net

 

Just Another Mallet # 85
By: The Wood Whirler
June 15, 2017 · 1,568 views

I needed another mallet, so I build one out of hickory.

 

The Firewood Projects - Part 2: Turned Firewood Mallet
By: Fatso's Workshop
May 31, 2017 · 443 views

Another simple project out of firewood is to turn a smaller diameter branch into a carvers style of mallet. I've made this one a bit smaller than the one I use so that my son can swing it around and it will go into his tool kit once we finish his workbench and stuff. _____________________ Music: Carefree Melody by Twin Musicom is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Source: http://www.twinmusicom.org/song/302/carefree-melody Artist: http://www.twinmusicom.org nocreeps — R.I.P Golden Ocean by NICOLAI HEIDLAS CC BY License 3.0

 

Wood turning - lets turn Kitchen mallet out of Iroko!
By: CraftWithAfshin
April 04, 2017 · 632 views

Hey guys today i will be turning kitchen mallet for my mum and i thought to myself i haven't yet done one for you guys it be good time to share it, let me know what you guys think and thank you all for watching! Music: Concentration Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

30Min Mallet
By: AtkinsonWoodturning Beast
March 20, 2017 · 65 views

Published on Dec 31, 2016 I made a kitchen mallet out of a 3x3x9 block of black walnut. (I made 4 that day and each one took around 30 min start to finish. sorry no pictures) I started by mounting it on my lathe between centers and then I used a roughing gouge to make the cylinder after that I used my oval skew to form most of the handle and do smoothing cuts on the head of the mallet. I also used a carbide scraper to define the curves in the handle. I used a wire burner to do some detail lines on the handle and then finished with beeswax so I would have a food safe finish on the mallet. Kitch

 

Wood Turning with Brett - Grandpa's Mallet Restoration
By: Wood Turning with Brett
March 18, 2017 · 266 views

Love projects like this...

 

19 - Turning a Carving Mallet from a Bowling Pin
By: Bill Rockwood
January 02, 2017 · 4,819 views

Having learned that the interior of bowling pins are hard maple, I try turning one into a carving mallet.

 

Wood Turning a Carvers Mallet
By: Turning with Donovan
December 18, 2016 · 86 views

 

Woodturning Carvers Mallet
By: Kuffys Woodwork
October 20, 2016 · 1,028 views

Don't forget to subscribe In this video I turn myself a carvers mallet made from random stick offcuts that I seem to collect over time. Dimensions: approx 280mm long x 68mm diameter Materials: Tasmanian Oak, Jarrah, Blackwood, finished with a quick sealer coat of orange shellac. https://www.instagram.com/kuffyswoodwork/ #woodturning #woodwork #mallet Let me know what you think in the comments section below. Thanks :D - - - - - - Check out one of my best videos: 'Wooden Jewellery Box' https://www.youtube.com/watch?v Mp3soxzdmis Remember to subscribe to keep up to date with my latest and greatest builds. Thanks - - - - - -

 

#120 DIY Woodturning an Oval Handled Shop Mallet
By: Stephen Ogle
September 10, 2016 · 10,296 views

I needed a new mallet for the shop. My old one I made with an oval handle for comfort and orientation. Using multiaxis techniques, I made my new one the same way. I hope you will enjoy this project.

 

Как сделать деревянный молоток
By: The Russian Woodworker
August 08, 2016 · 436 views

English: https://www.youtube.com/watch?v H9FkB3hRKzA

 

Making A Carver's Mallet
By: The Russian Woodworker
August 08, 2016 · 952 views

In this video I show you how I made a carving mallet out of sassafras and lignum vitae on the lathe. Music: Sci-fi By: Bensound

 

Fabrication d'un Maillet
By: J'M Le Bois
May 30, 2016 · 15,223 views

Bonjour à toutes et a tous , aujourd’hui une nouvelle vidéo sur la fabrication d'un maillet cette fois ci . J'espère qu'elle vous plaira , si c'est le cas n'oubliez pas de laisser un pouce bleu et de vous abonnez pour suivre toutes mes prochaines vidéos ;) Lien pour les dons : https://www.paypal.com/fr/cgi-bin/webscr?cmd _flow&SESSION QP3UcMl9FGBLy_jwfeZpBQLaysT0aMCDtYh0qN11ck_aCU1kVFi7k0na6Dy&dispatch 5885d80a13c0db1f8e263663d3faee8dcce3e160f5b9538489e17951d2c62172 Ma Page Tipeee : https://www.tipeee.com/j-m-le-bois Mon adresse mail : jm-le-bois@outlook.com

 

Carvers Mallet
By: Turntastic Wood Designs
April 30, 2016 · 119 views

I went from an oddly shaped ash log to a nice carvers mallet in about 30 minutes. The log had some chainsaw cuts in it that I had to work around. Please visit my etsy shop at https://etsy.com/shop/turntasticwooddesign

 

woodturning carving mallet
By: Landon Craig
April 16, 2016 · 774 views

woodturning ash carving mallet. Music: https://soundcloud.com/dj-direwolf-tm website: https://craigcarvings.com Etsy: https://www.etsy.com/shop/CraigCarvings?ref hdr_shop_menu

 

Woodturning With The Naked Turner Quick Look At Carvers Mallet I Made For A Friend
By: Erik Anderson
March 21, 2016 · 1,547 views

Quick Look at a carvers mallet I made for a friend

 

Woodturning Joiners Mallet
By: Custom Chris
December 30, 2015 · 8,511 views

For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

#153 Two wooden mallets
By: Miguel Sanchez
December 07, 2015 · 1,788 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#153 Maza y martillo de madera
By: Miguel Sanchez
December 07, 2015 · 32,097 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Turning a Wooden Mallet using just a Skew Chisel
By: Barry's Workshop
December 07, 2015 · 3,516 views

In this project, I challenge myself by turning a mallet using just a single tool, a skew chisel. It's a practical project to give myself some well-needed practice with the skew chisel. The skew chisel is a very versatile tool for spindle-mode turning. It can be used to make bevel supported cuts, and also as a negative rake scraper. For this video, I only used it for bevel supported cuts. The wood is oak, from a branch that broke during an ice storm last winter. It was rescued from the firewood pile and was very dry. I had to work around some cracks, and there are some knots that give it 'character'.

 

Wooden mallet out of a tree crown
By: Corpus Woodworks
November 12, 2015 · 107 views

Today I turned a wooden mallet out of the crown of an ash tree. Full of knots and stuff so really hard. Did the rough shaping wet and ond a shavinghorse over a year ago and left it to dry untill now. Lovely figure in the wood. Finished with oil and a mixture of beeswax/terpentine. Thanks for watching and please leave a comment below. All the best, Tom Facebook.com/c4woodworks

 

wood de bois un maillet
By: bovitch bov
November 01, 2015 · 1,624 views

wood de bois tournage d un maillet en bois

 

Turning a Wood Mallet Using Carbide Tools
By: SP Wood Art
October 01, 2015 · 18,674 views

This video is about wood turning a carvers mallet. In addition, we touch on the basic techniques for using some carbide wood turning tools. If you would like see more of SP Wood Art visit us at: www.spwoodart.com www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural stone or acrylic) that connect to people on an emotional and functional level. Each piece is meticulously designed to look and feel like an art piece holding some functionality.

 

How to make a T Fitting Mallet
By: Chris Pine
July 02, 2015 · 49,421 views

I found this really fun project on Pinterest which was Pinned form 'Woodsmith etips'. Link below to that pin. I loved this idea which is using a 3/4 inch t plumbing t fitting you make three wood pieces: A handle, and two mallet face surfaces and you have a mallet. I am really starting to like these shop tool projects. I did this project with my lathe and turned the wood pieces. One could very easily just shape the pieces by hand and or power tools to have a version that did not require a lathe. You actually use the t fitting to cut threads into the wood pieces. After making a tenon on the

 

Turn a Dead-blow Mallet
By: RickTurns
February 20, 2015 · 38,443 views

Woodturning: Turn a dead-blow mallet - a hollow mallet filled with lead shot, which strikes with no rebound, and is excellent for hitting metal tools, such as drive centers

 

How to make Wood Mallet
By: Chris Pine
February 20, 2015 · 18,034 views

I have seen a lot of woodworkers , including youtube ones make their own wood mallets. These are so much fun to make and there are many takes on this classic woodworking tool. The one I am making today is made form Hard maple, and I am going to use the lathe to make the parts round. You can easily make this mallet without a lathe and just cut the parts and use draw knives or routers etc to shape the parts. Of course doing it this way the parts will not exactly be round but just as functional as mine. The addition of the pieces of leather to the faces of the hammer is just a classy look an

 

winged bowl with mallet and chisel
By: R Humphrey
January 26, 2015 · 1,575 views

I took a chunk of cherry wood that was headed for the splitter and fire, and using a mallet and chisels made a bowl.

 

Woodturning a Cherry Mallet
By: Adze Woodturning
January 06, 2015 · 688 views

Woodturning a Cherry Mallet the first step in my shaving horse project.

 

Carver's Mallet: Turning The Shape (part 2)
By: WYOMINGWOODTURNER
October 01, 2014 · 10,138 views

In part 2, Sam continues his 'Carver's mallet' project. In this video he turns the outside shape to completion. Mallet in Pink Ivory and Ebony.

 

Carver's Mallet: Chasing the Threads (part 1)
By: WYOMINGWOODTURNER
October 01, 2014 · 23,191 views

Sam makes a carver's mallet from Pink Ivory and Ebony. In the first part he chases threads to join the head and handle.

 

Woodturning Simple Mallet
By: Custom Chris
September 17, 2014 · 11,618 views

.Simple mallet is a great starter project for new turners. I did one when I first started. Grab someone and tech them to turn. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Table Leg that wanted to be a Mallet
By: Cip's Wood Chips
August 30, 2014 · 3,431 views

I often have need of a mallet near my lathe but often use a table leg instead. I think that table leg was meant to be a mallet. In this video I will show you how I turned a table leg into a small mallet to keep handy.

 

Woodturning-Carver's Mallet
By: Peter Stewart
July 18, 2014 · 1,296 views

Cap'n Eddie: https://www.youtube.com/channel/UCh48-qjFjHhHCDPuuPZg4VQ Subscribe to my channel for new woodworking videos every Friday!

 

Making a mallet on a wood lathe
By: Bryson DuPree
March 23, 2014 · 208 views

via YouTube Capture

 

Woodturning-Mallet for the Shop
By: Peter Stewart
March 06, 2014 · 961 views

Please comment, rate, subscribe, and thumbs up for more woodworking videos :) Steve Ramsey: www.youtube.com/watch?v JcaV5jWpR1k

 

Tips, Tricks and Mallets
By: Paul Crabtree
December 20, 2013 · 665 views

Saying thank you to all of you viewers and subscribers. Selecting wood for a wood mallet. Tips for finding center, why the shape and turning the mallet. http://toolsbycrabtree.com

 

#17 Alder Mallet
By: The Tiny Trailer Workshop
October 15, 2013 · 605 views

Just a quick mallet. I had been using this piece of Alder earlier in the day, while using a chisel... the weight seemed to be pretty comfortable... so I figured ... why not? So whether you are setting a spur drive or knocking a small mortise out... this could be the build for you. Thanks for watching Larry and don't forget to subscribe!!

 

Turning a Maple Carver's Mallet
By: Cip's Wood Chips
September 12, 2013 · 26,489 views

I made this mallet from a maple tree branch that has been drying for 8 to 10 years. The wood was hard and very dry. Actual turning time was about 1 1/2 hours.

 

Woodturning Lathe Projects - HARD WOOD SOFT WOOD MALLET
By: WoodChipsCC
August 08, 2013 · 2,172 views

Mallets can be all sizes and shapes. This one is hard wood on one end and soft wood on the other. SHARPENING LATHE CHISELS http://youtu.be/MLPtZA-6hbg

 

Create a Mallet for sculptures... by ConfusionWood
By: Confusion Wood
January 23, 2013 · 10,250 views

Create a Mallet for sculptures... by ConfusionWood Wood: ash tree youtube channel: http://www.youtube.com/ConfusionWood blog: http://www.confusionwood.blogspot.ro

 

00015
By: bradturbo44
January 23, 2012 · 167 views

woodcarving mallet made from chesnut and oak

 

Turned Wooden Mallet
By: Carl Jacobson
January 18, 2012 · 49,370 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg I used the lathe to make this wooden mattet. A mallet is great tool to have in the shop, and a tool you can make yourself. Miterset http://miterset.myshopify.com/?aff 22 I upload a new project video every Friday, and I'm live Monday, Wednesday, and Friday. Check out my Twitch channel. https://www.twitch.tv/carljacobson Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworkin

 

Mallet 5 - Completing the project
By: Bob Hamilton
October 08, 2009 · 3,475 views

This is segment 5 of 5 of a video about making a turned mallet.

 

Mallet 4 - Finishing the handle, starting on the head
By: Bob Hamilton
October 08, 2009 · 3,372 views

This is segment 4 of 5 of a video about making a turned mallet.

 

Mallet 3 - Shaping the handle
By: Bob Hamilton
October 08, 2009 · 3,840 views

This is segment 3 of 5 of a video about making a turned mallet.

 

Mallet 2 - Roughing out a new mallet
By: Bob Hamilton
October 08, 2009 · 10,235 views

This is segment 2 of 5 of a video about making a turned mallet.

 

Mallet 1 - Rehabbing the old ones
By: Bob Hamilton
October 08, 2009 · 5,216 views

This is segment 1 of 5 of a video about making a turned mallet.

 

Return to Turning Videos

Great Bargains
(ends November 27, 2019)


Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase

 


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase


Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Great Bargains
(ends December 24, 2019)


Denim Woodturner's Apron

On Sale for only $17.99

Save $12.00

List price: $29.99

This is a one-size fits all, heavy duty denim apron with a soft-cloth collar and criss-cross shoulder straps. It even includes a pencil pocket.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Sorby 6-Piece Woodturning Set with Book and DVD (Woodturning: A Foundation Course)

For only $229.99

Save $100.00

List Price: $329.99

Robert Sorby's flagship set of turning tools is designed to fill the needs of woodturners from beginner to professional. These high-quality tools will shorten the learning curve for those just starting out, and are sure to impress the seasoned woodturner. The set comprises six of Robert Sorby's core range of tools: a roughing gouge, spindle gouge, bowl gouge, skew, parting tool and scraper. Each tool is crafted from the highest quality high speed steel, and married to a comfortable handle turned from solid ash. The set arrives in a high quality box that provides an attractive presentation as a gift, and practical storage thereafter.

Click here for more information or to purchase


Dust Right® Lathe Dust Collection System

For only $39.99

Save $20.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase


Excelsior Mini Lathe

For only $229.99

Save $70.00

List Price: $299.99

The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200 RPM. Cast-iron body provides mass for minimal vibration, stable turning and maximum durability.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodturning Online
Rockler
Flutemaster

(Click any Ad to go to our Sponsor's Website)