Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Miniatures Videos (13)

Sort by

Or click here to: Search All Videos


Turning a small scoop
By: Rich McNatt
April 11, 2018 · 973 views

 

tiny turning hallow form ( just goofing off)
By: Rich McNatt
January 31, 2018 · 214 views

I am just playing around this morning Yuval: https://www.youtube.com/watch?v D2-KOZz1YuY

 

Tiney turning 0.5mm lead
By: Rich McNatt
January 31, 2018 · 726 views

Just playing around after watching Custom Chris turn a pencil https://www.youtube.com/watch?v Erm27HFEaAE&t 0s Yuval: https://www.youtube.com/watch?v D2-KOZz1YuY

 

Micro Turning Follow Up (2mm Goblet)
By: Yuval Lahav Woodturning
January 30, 2018 · 2,555 views

I wasn't done after turning the two goblets in my last video... I had to have another try at a micro turning, using a special tool. I published a little of the process on Facebook, but was compelled to come up with a better Youtube version. So enjoy the soothing quality of my voice explaining a little bit of this micro turning. Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinter

 

Micro Pencil Lead Turning Goblet
By: Custom Chris
January 30, 2018 · 824 views

Mikes Video https://www.youtube.com/watch?v TFt1tp0GYss Yuval's Video https://www.youtube.com/watch?v PCLeif8KVdY&t 7s Video Editor is Filmora https://filmora.wondershare.com/ FaceBook https://www.facebook.com/customchriswoodworks

 

Woodturning - Micro Wine Bottle, Goblets and Tray
By: Mike Waldt
January 28, 2018 · 6,995 views

For a bit of fun I turn a micro Wine Bottle, Glasses and a tray :) Kostas Annikas- https://www.youtube.com/user/annikas88 Yuval Lahav - https://www.youtube.com/watch?v PCLeif8KVdY&t 87s Highland Boxes - https://www.youtube.com/user/pamharris101 Peter Woodbine - https://www.youtube.com/user/peedrow3 Simon Hope: http://www.hopewoodturning.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Makers Central YouTube Channel: https://www.youtube.com/channel/UCJSreLjUhGr927JMvtRIKXA Makers Central website: http://www.makerscentral.co.uk/ NZ Woodturning: https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA

 

Arte en Torno-Miniaturas con duelas sparadas
By: Arte en Torno
July 27, 2014 · 3,939 views

La belleza y delicadeza que se logra es inigualable. Es sumamente gratificante trabajar con este arte del torneado segmentado.

 

Minis 1 - The Cuts (1 of 2)
By: charlieb1946
July 12, 2012 · 1,960 views

Turning miniatures isn't much different from turing 'regular size' - same cuts - smaller scale - and a different cutting tool - a 1/4' bench chisel. This video ( 1 of 2 on cuts) shows you how I do the basic cuts - with a bench chisel, used like a bedan. The next video will be how I do the neck of a Drozda-esque 'onion' finial. I've also done videos using these basic cuts to turn a miniature plate, bowl, hollow form, hollow form with finial and a Sphere with Finial & Icicle on a Pedestal.. I've also done Illustrated Step by Step HOW TOs you can print, add notes to while watching one of these videos - and take to your lathe to try out what I've showed you. Miniatures are quick and fun to turn. Try it, you'll probably like it! http://web.hypersurf.com/ charlie2/Turning/Miniatures/Miniatures1.html If you have any questions you can post them here or e-mail them to me at charlieb@accesscom.co

 

Minis 7 - Miniature Onion Finial (part 2 of 2)
By: charlieb1946
June 30, 2012 · 1,186 views

One way to turn a miniature finial - Part 2 of 2 - The FUN Part To see Part 1 of 2 go to http://www.youtube.com/watch?v Akm2bVtGgCo If you want to REALLY develop fine tool control - try one of these. If you blow it - no big deal - almost no wood lost. Get a 3/4' poplar dowel at your local hardware store (ACE carries them) or BORG / BIG BOX Store and turn some miniature finials. For more on turning miniatures go here http://web.hypersurf.com/ charlie2/Turning/Miniatures/Miniatures1.html To get an illustrated Step By Step of this process, that you can download, print and take out to the lathe go here: http://web.hypersurf.com/ charlie2/Turning/Miniatures/TurningMiniatureFinial1W.gif

 

Minis 6 - Miniature 'Onion Finial' (part 1 of 2)
By: charlieb1946
June 30, 2012 · 1,553 views

Turning miniatures is a lot of fun. Turning miniature plates and bowls is pretty quick and easy to learn to do. Miniature hollow forms are a bit trickier but with a little trial and error, they're not that harder to do. It's turning delicate miniature finials for the top of a little hollow form that can be a bit 'challenging'. But once you've seen how it CAN be done, things get a bit easier. I hope this video and the one that follows gets you thinking 'Hell, I can do THAT. I'm going to give it a try. YOU CAN DO IT!

 

TurningMiniatures-BenchChiselBedan
By: charlieb1946
June 26, 2012 · 1,076 views

Turning miniatures can be a lot of fun. Don't need much wood, don't need any expensive tools (ok to a chuck IS needed) and they can be quick and easy to turn. This is the first of a series of videos on turning miniatures. This specific video is on using a simple bench chisel like you'd use a more expensive and a bit harder to find bedan to make some basic, but pretty precise cuts you'll use turning miniature plates, bowls, lidded boxes, hollow forms, lids and finials. The next video will be on turning a simple miniature bowl. That will be followed by a video on turning a miniature hollow form. Finally, I'll show you one way to turn a miniature finial to top off a hollow form. I hope after watching these video - and checking out the stuff at this link, YOU will have a go at doing some miniature turning. http://web.hypersurf.com/ charlie2/Turning/Miniatures/Miniatures1.html

 

Turning a Miniature Demonstration - Part 2
By: WoodenNicol
July 15, 2009 · 6,807 views

Part 2 of the turning of a aspen wood hollow form miniature by the Wooden Nicol. Finishing the hollowing and applying the final touches.

 

Turning a Miniature Demonstration - Part 1
By: WoodenNicol
July 15, 2009 · 5,840 views

Part 1 of the turning of a aspen wood hollow form miniature by the Wooden Nicol. Roughing out the blank and sealing cracks.

 

Return to Turning Videos

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Hunter Woodturning Tools
Stainless Steel Bottle Stoppers
Woodpeckers

(Click any Ad to go to our Sponsor's Website)