Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Ornaments Videos (527)

Sort by

Or click here to: Search All Videos


Birdcage Ornament ·
By: Derek Oliver
November 29, 2017 · 64 views

A bird cage ornament made from oak, cedar, and poplar dowels.

 

Is There a Christmas Tree Inside that Aluminum Ingot? ·
By: RickTurns
November 28, 2017 · 511 views

Nothing says 'Christmas' like an artificial Christmas tree!!!! The music during the close of the video, Happy Little Elves by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Christmas Ornament Challenge 2017 - Elizabeth ·
By: Make Crazydays
November 28, 2017 · 126 views

This is Elizabeth Day’s entry into the 2017 Christmas Ornament Challenge. The playlist for the challenge can be found at http://www.youtube.com/watch?v -R0Z_-Ivy08&list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

Found Pine Christmas Ornament ·
By: Peaceful Woodturner
November 28, 2017 · 3 views

A more elaborate ornament from a piece of pine I found in the woods. Another piece for really good skew practice. All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so that you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey!

 

Pine Ornament Christmas 2017 ·
By: Peaceful Woodturner
November 28, 2017 · 8 views

A simple little ornament from a piece of pine found in the woods. Some good skew practice and a nice end result. All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so that you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey!

 

Segmented Kyle Toth Inspired Christmas Ornament ·
By: The Russian Woodworker
November 28, 2017 · 151 views

In this video I make a Christmas Ornament for the annual 2017 Christmas ornament challenge hosted by Carl Jacobson and Allan Stratton. Carl: https://www.youtube.com/user/haydenHD Allan: https://www.youtube.com/user/AsWoodTurns And I made this using a strategy of using a thin layer of veneer from Kyle Toth. Kyle: https://www.youtube.com/user/HomedepotKt

 

4 styles of $5, $10 & $20 Holiday Ornaments - Art/Farmers Market Projects ·
By: wortheffort
November 27, 2017 · 4,043 views

The holidays are here. Time to batch out family/office gifts or impulse buys for the markets. In this video we make 4 styles of ornaments utilizing the lathe, finials, sea urchins and the CNC. Lots of tool usage, design and production tips throughout. --------------------------------------------------------------------- Introduction - 00:00 CNC setup - 03:40 Material, Tools & Setup - 05:15 Sharpening - 13:00 Finial Techniques - 16:00 Finial Design - 19:00 Sharpening Gouges - 24:15 Cutting Angles - 29:45 Turning Techniques - 35:30 Processing Urchins - 44:30 Production Montage - 47:15 Sputnick U

 

Woodturning Making some Cristmas decorations ·
By: Rebel Turner
November 26, 2017 · 2,888 views

I made an Angel and Collin joined me to make a snowman fun and quick.

 

Woodturning with Tim Yoder Classics-LED Christmas Tree Part 2 ·
By: woodturningwithtim1
November 25, 2017 · 4,680 views

By adding a few turnings to one another and stringing a cool series of LED lights through your turning, you'll create a great table-top holiday decoration (make extras, because they make great gifts!). Part 2 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Woodturning with Tim Yoder Classics-LED Christmas Tree Part 1 ·
By: woodturningwithtim1
November 25, 2017 · 5,949 views

By adding a few turnings to one another and stringing a cool series of LED lights through your turning, you'll create a great table-top holiday decoration (make extras, because they make great gifts!). Part 1 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

#91 2017 Christmas Ornament Challenge ·
By: Yuval Lahav Woodturning
November 25, 2017 · 5,140 views

This is my entry to Carl Jacobson and Alan Stratton's 2017 Christmas ornament challenge. This project (and video) were inspired by the work of Malcolm Tibbetts, you can find his excellent video, 'The Power of Seven', here: https://www.youtube.com/watch?v V1viPrqDxpo Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.r

 

Woodturning Christmas Ornament Using Infinite Axis Chuck ·
By: As Wood Turns
November 25, 2017 · 1,557 views

http://www.AsWoodTurns.com The Christmas Ornament Challenge is accepting entries through November. Enter yours at www.AsWoodTurns.com/Challenges/. For this project, I decided to do something different. Instead of a hollow globe with finials, I decided to substitute a disk for the globe and place decorative elements on the sides. The Infinite Axis Chuck is perfect for turning the decorative elements. My ornament is about 7 inches tall and 3 inches across the disk and finished with brushing lacquer. My process (as modified for next time): 1. Saw parallel cuts on the top and bottom of the woo

 

Woodturning a Christmas napkin ring #Christmas Ornament Challenge 2017 ·
By: Kostas Annikas Deftereos
November 25, 2017 · 868 views

This is my entry to Christmas Ornament Challenge 2017 ! i try to make something easy to anyone and very usefull ! i hope you like it !!! happy holidays to everyone !!! here is the links for the challenge and the people that enter it !! Alan : https://www.youtube.com/channel/UCucYlCYbbf1ZDGO-7OjKl5w http://www.AsWoodTurns.com Carl : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg http://www.TheWoodShop.tv and the links for the channel list with so many beautifull creations https://www.youtube.com/playlist?list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x

 

Снеговик с секретом (Snowman with a secret) ·
By: Аleksey Bek
November 25, 2017 · 342 views

Через месяц наступит Новый год. Сегодня будем точить снеговика из дерева. В нижней части будет полость для маленьких подарков. A month come the New year. Today we will sharpen the snowman from the tree. At the bottom is a cavity for small gifts.

 

Christmas Ornament Challange 2017 ·
By: Northern Woods Turning
November 25, 2017 · 52 views

Martin Young - Northern Woods Turning This ornament is made from Ash with resin stripes.

 

Bird House Ornament 2017 – Wood Turning Part 1 ·
By: Mike Peace Woodturning
November 24, 2017 · 2,546 views

I demonstrate how to turn a simple two piece bird house Christmas tree ornament. I discuss and show examples of different design considerations. I demonstrate how to turn a miniature bird detail to kick it up a notch. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Bird House Ornament 2017 – Wood Turning Part 2 ·
By: Mike Peace Woodturning
November 24, 2017 · 2,072 views

I demonstrate how to turn a miniature bird detail to kick it up a notch on your wood turned bird house. I discuss and show examples of different design considerations. Click here for part 1 https://www.youtube.com/watch?v fngoGEPRaW0&index 14&list PLG3S-gdoXeXW6n1zYy64EaR3Swpq8dDAD Checkout the link to Steve Krumanaker’s channel https://www.youtube.com/channel/UC48jUuQ_rLe85ulKP8gCsmA I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop

 

2017 Christmas Ornament Challenge Update #2 ·
By: As Wood Turns
November 24, 2017 · 1,151 views

http://www.AsWoodTurns.com This is the second update to the Sixth Annual Christmas Ornament Challenge to show all the ornament and videos submitted to date. Links to these videos: All videos are in a playlist at https://www.youtube.com/playlist?list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x or 2 Mauro Migone https://youtu.be/skcRrmAqjYE 3 Patrick Laperrière ( Pat Lap ) https://youtu.be/PCIeNlTBG-c 4 Billy Burt https://youtu.be/tSbEiPYrDu4 5 Steve Krumanaker https://youtu.be/aRHXmuVY_5s 6 Mauro Migone https://youtu.be/aV3XUziCjkE 7 Thijs Gijbels https://youtu.be/4TlK9ebch7U 8 Walt Wager https://you

 

Ornament Challenge 2017 ·
By: aesop717
November 24, 2017 · 192 views

Ironic Ornament - Star of David Christmas Ornament Made from Redheart and Holly with a copper wire eyelet.

 

cedar Christmas tree ·
By: Rons Woodturning shop
November 23, 2017 · 119 views

Made me a Christmas tree using cedar with airbrushed highlights. Thanks you Rick Morris from Rick turns for the inspiration! It was fun.

 

How to Turn Christmas Trees - Sawdust Factory Woodturning ·
By: Josh Bayer
November 22, 2017 · 1,075 views

In this video we walk through how to turn Christmas trees from square spindle stock laying around the shop. This is a great project to 1. Build skill and practice your spindle turning technique 2. make some fun a creative gifts for friend and family around Christmas time. As you'll see in the video i can always use Spindle turning practice. if you enjoyed the video check out my channel for other wood turning videos and subscribe for my latest updates and videos.

 

Bird House Ornaments – Lite ·
By: Mike Peace Woodturning
November 21, 2017 · 1,842 views

See a few bird house ornaments I have wood turned. I preview a miniature bird I will be turning in my next video due Friday. Thinking about thanksgiving. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html Checkout the link to Steve Krumanaker’s channel https://www.youtube.com/channel/UC48jUuQ_rLe85ulKP8gCsmA

 

Live Q&A Woodturning / Easy Christmas Ornaments ·
By: Carl Jacobson
November 20, 2017 · 5,192 views

In this live video I turn a Christmas ornament. Tool Masters Association: https://www.izzyswan.com/tma-carl/?wpam_id 3 Christmas Ornament Challenge http://www.aswoodturns.com/challenges/ Download The Giddy App https://giddy.io/dowhatyoulove RZ Mask: https://rzmask.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order Tools and Supplies I use in my shop: ------------------------ Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Tho

 

Christmas Ornament Challenge Part 1 ·
By: Sears Woodturning
November 19, 2017 · 53 views

Carl Jacobson Challenge

 

Christmas Decoration Inside Out Turning ·
By: Turntastic Wood Designs
November 18, 2017 · 141 views

A fun Christmas Decoration using the inside-out turning method,

 

Making a hollow Christmas ornament ·
By: Made by Brent
November 18, 2017 · 71 views

This is a video on how I make hollow ornaments. I made this for the christmas ornament challenge put on by Alan Stratton and Carl Jacobson.

 

Christmas Ornament Challenge part 2 ·
By: Sears Woodturning
November 18, 2017 · 7 views

Carl Jacobson Ornament Challenge

 

Christmas ornament Challenge Part 3 Hat ·
By: Sears Woodturning
November 18, 2017 · 9 views

Carl Jacobson Ornament Challenge

 

Woodturning Inside Out Open End Christmas Ornament With LED ·
By: As Wood Turns
November 17, 2017 · 2,209 views

http://www.AsWoodTurns.com The Christmas Ornament Challenge is accepting entries through November. Enter yours at www.AsWoodTurns.com/Challenges/. Inside out Christmas ornaments are a challenge for me. The profile of the inside turning is difficult to visualize. The turning often results in thin sections with fragile short grain. The resulting slats are wickedly knife sharp. Yet, these ornaments are a great project with a fantastic unique look. After a recent article in American Woodturner, I decided to try an inside out turning with an open end. It should not be that hard can it be? Well,

 

How to make a Colored Pencil Tree Ornament ·
By: Myers Woodshop
November 12, 2017 · 2,029 views

I made some tree shaped colored pencil ornaments. Follow me through the process of how I make them. I used the xcarve to cut out foam mold the shape of a tree. I fill that mold with colored pencils. Then I pour resin in and wait 12 hours for the mold to harden. I take the mold to the band saw and cut out the tree shape. Finally, I slice the mold into thirds and attach the ribbon at the top. Items I used in this video: Epoxy Resin: http://amzn.to/2zmWbM1 Colored Pencils: http://amzn.to/2BjY1i3 CA Glue: http://amzn.to/2i0ZODJ Bandsaw Blade: http://amzn.to/2Bka1ju Bandsaw: http://amzn.to/2A4tozo Silicon Mat: http://amzn.to/2zkucMI Festool Sander: http://amzn.to/2A4Wn5W Cutech Jointer: http://amzn.to/2A3ihGK Micromesh sandpaper: http://amzn.to/2BjqdBC Gorilla Tape: http://amzn.to/2BkEpKw Dewalt Drill: http://amzn.to/2A3NSrj Drill Bit: http://amzn.to/2iNjTKM You can find me at www.myerswoodshop.com I might even have some of these up on my etsy shop!

 

Turning a Christmas Ornament Kit | Woodturning How-to ·
By: Craft Supplies USA
November 10, 2017 · 2,985 views

Learn how to turn a Christmas Tree Ornament Project Kit today!! Shop now: https://www.woodturnerscatalog.com/t/62/Ornaments?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Top Hat ornament kit is plated with rich 10k gold or chrome to produce a holiday glow on your Christmas Tree. This kit uses a single tube with press in components that make it easy to turn. Have some fun and turn a custom ornament for family and friends that they’ll cherish for years to come. Traditional Top Hat design Single tube d

 

Eccentric Christmas Tree Ornament – Wood Turning ·
By: Mike Peace Woodturning
November 10, 2017 · 4,390 views

I demonstrate another approach to making a Christmas Tree ornament that involves changing the axis of the tree and cuting Vee grooves with a skew. It is easier than it sounds if you are worried about using a skew. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

2017 Christmas Ornament Challenge Update #1 ·
By: As Wood Turns
November 10, 2017 · 1,500 views

http://www.AsWoodTurns.com This is the first update to the Sixth Annual Christmas Ornament Challenge to show all the ornament and videos submitted to date. Links to these videos: All videos are in a playlist at https://www.youtube.com/playlist?list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x or 2 Mauro Migone https://youtu.be/skcRrmAqjYE 3 Patrick Laperrière ( Pat Lap ) https://youtu.be/PCIeNlTBG-c 4 Billy Burt https://youtu.be/tSbEiPYrDu4 5 Steve Krumanaker https://youtu.be/aRHXmuVY_5s 6 Mauro Migone https://youtu.be/aV3XUziCjkE 7 Thijs Gijbels https://youtu.be/4TlK9ebch7U 8 Walt Wager https://yout

 

Christmas Trees - painted and turned pine trees ·
By: Tod Raines
November 09, 2017 · 595 views

Produced by Tod Raines of Woodturning Tool Store on November 9, 2017 This video shows a simple way to make small Christmas trees for decorating. First is to turn a simple cone tree shape. Then paint and turn the fringed curls - this is why pine works best. Lastly is to turn and decorate the stem and foot and then part off. Make several at once and create a grouping of trees. Happy turning. Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Facebook: https://www.facebook.com/tod.raines Google : https://plus.google.com/ TodRaines Instagram: https://www.instagram.com/traines64

 

Woodturning with Tim Yoder-Glass Insulator Christmas Angel Part 2 ·
By: woodturningwithtim1
November 08, 2017 · 5,649 views

Using antique glass insulators Tim makes Christmas Angels for the holidays. Combining Walnut and Birdseye Maple with aged glass makes for a stunning display and a rewarding project. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Woodturning with Tim Yoder-Glass Insulator Christmas Angel Part 1 ·
By: woodturningwithtim1
November 08, 2017 · 6,426 views

Using antique glass insulators Tim makes Christmas Angels for the holidays. Combining Walnut and Birdseye Maple with aged glass makes for a stunning display and a rewarding project. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Wood Turning - My Christmas Ornament Challenge Entry ·
By: Mike Waldt
November 07, 2017 · 6,360 views

My entry for the Christmas Ornament Challenge, organised by Carl Jacobson and Alan Stratton, thanks both :) Carl's Channel: https://www.youtube.com/user/haydenHD Alan's Channel: https://www.youtube.com/user/AsWoodTurns Nick Bowers: https://www.youtube.com/channel/UCAkpK8-LiVla53eSC3NjoIg Harrogate Show Website: http://www.skpromotions.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk/ Makers Central YouTube Channel: https://www.youtube.com/channel/UCJSr... Makers Central website: http://www.makerscentral.co.uk/ NZ Woodturning: https://www.youtube.com/channel/UC3-0...

 

Christmas Decorations on the Lathe ·
By: DentonTurners
November 07, 2017 · 1,145 views

Sammy Thomason returns and shows us some ideas for making Christmas decorations on the lathe. He makes Christmas trees, Angels, and talks about tips and methods for making inside-out ornaments. Enjoy!! This was recorded at the monthly meeting of the Golden Triangle Woodturners in Denton, Texas. We meet monthly 7pm the first Monday of each month in the Center for the Visual Arts, located at the corner of Hickory and Belle Streets in Denton. All are welcome!! http://www.goldentrianglewoodturners.org

 

Do you want to Turn A Snowman ·
By: GZ Woodturning
November 06, 2017 · 1,368 views

Do you want to Turn a snowman getting ready for Christmas SUBSCRIBE TO MY CHANNEL HERE https://www.youtube.com/channel/UCiMX... FOLLOW ME ON INSTAGRAM https://www.instagram.com/gz_woodturning SPECIAL THANKS TO NCS MUSIC https://www.youtube.com/user/NoCopyrightSounds MY LATHE, IS FROM RECORD POWER http://www.recordpower.co.uk/ GZ WOODTURNING DISCLAIMER Please note that my channel is for entertainment purposes only. You should NOT rely solely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker or wood turner and working with machinery can be dangerous. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

 

4 Easy To Make Christmas Decorations ·
By: Axminster Tools & Machinery
November 03, 2017 · 6,648 views

Making for Christmas is a great way to make your Christmas a little bit more special. Watch Colwin turn four easy to make wooden Christmas decorations and learn how to turn some treasures of your own! Not only will they make the perfect gifts for loved ones, they will also make a joyous addition to your tree decorations. ---------------------------------------------------------------------------------------------- SHOP - http://www.axminster.co.uk BLOG - http://knowledge.axminster.co.uk/ FACEBOOK - https://www.facebook.com/axminstertoolcentre EBAY STORE - http://stores.ebay.co.uk/axminstertoolcentre CALL (UK) - 0800 371822

 

Woodturning a hollow spiral globe ornament ·
By: Walter Wager
November 02, 2017 · 50,455 views

Video shows how to use the Merlin 2 to make a hollow spiral globe ornament

 

Making an Acorn Box Christmas Ornament ·
By: Le PicBois
November 01, 2017 · 2,332 views

I made this acorn box for the 2017 Christmas Ornament Challenge Hosted by Carl Jacobson & Alan Stratton: http://www.aswoodturns.com/Challenges/ • Carl's Channel: https://www.youtube.com/user/haydenHD • Alan's Channel: https://www.youtube.com/user/AsWoodTurns • Challenge Playlist: https://www.youtube.com/watch?v -R0Z_-Ivy08&list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x _________________________________________ Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Insta

 

Snowman 2017 - Pupazzo di neve 2017 ·
By: Mauro il tornitore
October 31, 2017 · 354 views

A many wood Christmas ornament. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Ornamento natalizio multilegno. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Turning a Christmas tree #07 ·
By: Made by Brent
October 31, 2017 · 15 views

Christmas time is coming so we need to get started on projects. This is one way that I turn christmas trees. It is a very fun project for just about any skill level.

 

Gnarly Christmas tree ·
By: Steve Krumanaker
October 29, 2017 · 491 views

A gnarly 'Christmas tree' ornament stand. Dance of the Sugar Plum Fairies by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100270 Artist: http://incompetech.com/ Angels We Have Heard by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?collection 004&page 1 Artist: http://incompetech.com/ Bethlehem - Christmas by Kev

 

Christmas Ornament Dimensions ·
By: RickTurns
October 24, 2017 · 929 views

I've had a few requests for the dimensions of some of the Christmas ornaments that I have turned. This videos gives the dimensions of my flying saucer ornament, lighthouse ornament, and bell ornament. The music during the close of the video, Happy Little Elves by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Turning a Birdhouse Ornament with Mike Short ·
By: Show Me Woodturners
October 22, 2017 · 193 views

Turning a birdhouse ornament.

 

Christmas Ornament 2017 ·
By: Mauro il tornitore
October 19, 2017 · 751 views

My entry for the 2017 Christmas Ornament Challenge.

 

2017 Christmas Ornament Challenge ·
By: As Wood Turns
October 19, 2017 · 2,348 views

http://www.AsWoodTurns.com We're announcing the Sixth Annual Christmas Ornament Challenge. The challenge is open to all crafts, all materials, collaborations, mixed media, whatever. To enter, video you making your ornament and upload it to your YouTube channel. Then at http://www.AsWoodTurns.com/Challenges, complete the form. But sure you get a successful confirmation message. The challenge ends midhight November 30, 2017 We'll announce winners in December. Again. the challenge is open to ornaments from all crafts and combination of crafts. Alan's Website: http://www.AsWoodTurns.com Carl's Website http://www.TheWoodShop.tv Where to submit video: http://www.AsWoodTurns.com/Challenges

 

2017 Christmas Ornament Challenge! ·
By: Carl Jacobson
October 19, 2017 · 4,887 views

Alan and I are kicking off the 2017 Christmas ornament challenge. I look forward to seeing your entry. http://www.aswoodturns.com/challenges/ THANK YOU TO ALL THE SPONSORS! Robust Woodturning Tools- http://www.turnrobust.com/ Easy Wood Tools- http://www.easywoodtools.com/ Wood Turners Wonders- http://woodturnerswonders.com/ ChefwareKits- https://www.chefwarekits.com/?trackin... CA Glue: https://www.starbond.com/ MancraftingTM: https://mancraftingtm.com/ TMA: https://www.izzyswan.com/toolmasters/ IMAGINLAY: https://www.easyinlay.com/ Craft Supplies USA: https://www.woodturnerscatalog.com/ The

 

Angel without a Halo ·
By: Woodturning - My Way
October 11, 2017 · 115 views

This is a Demo on how I make small Angels ornaments. It ititially had a Halo but I had a 'design change' near the end.

 

Designing Two Stave Inside Out Christmas Ornament ·
By: As Wood Turns
September 15, 2017 · 2,571 views

http://www.AsWoodTurns.com Inside out Christmas ornaments present a challenge for me. They are tough to visualize due to the interaction of the inside and the outside turning. For this two stave inside out ornament, I started to plan the woodturning using Sketchup. Sketchup is a three dimensional modeling application. I use the free non pro version. While I can draw a round object with curves, it would be difficult to edit. To avoid this difficulty, I approximated the shape by using 1/4' steps, planning to smooth out the final ornament. Since this ornament uses two staves, I first drew one

 

Angel... Maybe something for the little ones to colour or paint! ·
By: Bram the Wadesmill woodturner
September 03, 2017 · 275 views

Inspiration of the angel Als channelhttps://www.youtube.com/channel/UCi5o1Xb3lwgRIUoKlBnZouw Miguels channel https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Freddy Beems channel https://www.youtube.com/channel/UCpR2gBYgUZ6-xvs5y5qormQ Andrew Whales channel https://www.youtube.com/channel/UCSC3IJ8mthuMuHLC-vLARpw Chris the blind woodturner https://www.youtube.com/channel/UCkkxNOUNP8kNT7Gvpc1MjJg Rob summerlin https://www.youtube.com/channel/UCSTl-BQomeXoJqevZ_MxpOw Keith Barrow https://www.youtube.com/channel/UC1xj8Lp_fmCX0GXr208rP9w Mike Waldt https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w

 

Inside Out Christmas Ornament - Tree and Finials ·
By: As Wood Turns
August 18, 2017 · 2,472 views

http://www.AsWoodTurns.com In this video, I complete my inside out Christmas ornament. Last week, I turned the body; now I'll turn the interior tree for display, the finials, and everything else to complete the ornament. Last week, I noted that it could become a bell but I decided to stick to my original plan and only include a bell in the top finial. The top finial is about 1' long made from a tropical hardwood pen blank. The hanger is fine wire twisted around a drill bit and glued into the top finial. At the bottom of the globe is a walnut spacer. It serves dual purposes: 1) to visually

 

Inside Out Christmas Ornament - The Basics ·
By: As Wood Turns
August 11, 2017 · 5,304 views

http://www.AsWoodTurns.com It's time to start planning for Christmas ornaments and the 2017 Christmas Ornament Challenge. To get ready, I'm turning an inside out ornament whose body is maple in this video. In the next video, I'll turn finials and the central display. My original plan was for a Christmas Tree to be in the center. But after turning the globe portion and looking at it upside down, it looks like it could be perfect for a Christmas Bell ornament. I'll have to decide soon. The ornament body is made from four pieces of 1.5' x 1.5' x 10' maple. The process: 1. Prepare the staves.

 

005 1 1 WWRJF Christmas Angel 2011 29 min ·
By: Richard Ford
July 04, 2017 · 27 views

This is my 2011 method for making Christmas Angeles.

 

Wood & Resin Disc ·
By: SCCFORUM
April 17, 2017 · 276 views

Hi All, This was a nice project to do. I ended up sticking it on the door but I could of drilled a hole in it and turned it into a pendant. Or drill a couple of holes in the middle and turn it into a very large button. :-)) I got the Idea from watching a video from Pam at Highland Boxes. https://www.youtube.com/channel/UCkg4kARmfFOfrlWDGUHzHqQ Cheers Paul

 

Turning a Cardinal Part 2 ·
By: Derek Weidman
April 14, 2017 · 553 views

http://derekweidman.com/ Final touches on the cardinal project. Filmed by Nicholas La Due Photography www.NicholasLaDuePhoto.com

 

Turning a Cardinal Part 1 ·
By: Derek Weidman
April 13, 2017 · 896 views

http://derekweidman.com/ The begining process of sculpting a cardinal on a lathe by Derek Weidman Filmed by Nicholas La Due Photography www.NicholasLaDuePhoto.com

 

Ornaments Pt 2 Turn sound down!! ·
By: Dry Creek Woodturning
April 09, 2017 · 53 views

This is a short production run of ornaments, unedited and sped up. It's long but you get the idea

 

Ornament Part 1 one off ·
By: Dry Creek Woodturning
April 03, 2017 · 68 views

Though this is not how I do ornaments normally, this shows all the steps

 

Woodturning Ornaments 2016 ·
By: Dry Creek Woodturning
March 30, 2017 · 67 views

Hand turned and dyed ornaments from curly maple. Please like and subscribe.

 

#78 Turning an 'Ancient & Rusted' Malle Burr Wood Ornament ·
By: M. Saban Smith Woodturning
January 24, 2017 · 5,858 views

So this week, after three weeks or so of putting it together sees the reveal of the sister piece to that I've been showing off in Turner's Journey recently. Face-plate turning is not something I do much off, but this piece was entirely turned on a face-plate - and I loved it! This arty wood turning piece is malle burr wood from Australia and has been turned and sculpted on the lathe to resemble something rather old, almost fosillised, I guess. The ripples have been coated with Modern Masters Reactive Paint and the central boss has been given a copper leaf treatment. The back has been rusted

 

Christmas Ornament Challenge Results 2016 ·
By: Carl Jacobson
December 27, 2016 · 8,343 views

Christmas Ornament Challenge Results 2016 I upload a new project video every Friday, and I'm live Monday, Wednesday, and Friday. Check out my Twitch channel. https://www.twitch.tv/carljacobson Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yaho

 

Christmas Ornament Challenge Results 2016 ·
By: As Wood Turns
December 27, 2016 · 2,605 views

Announcing the winners from the 2016 Christmas Ornament Challenge. The Challenge Playlist via AsWoodTurns: http://www.aswoodturns.com/challenges/christmas-ornament-2016/ The Challenge Playlist via YouTube: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Thanks to each craftsperson who submitted their ornament and video. Thanks to sponsors for providing wonderful prizes. Thanks to each viewer who nominated their choices in the Viewer's Choice. Thanks to everyone else who viewed and appreciated the creativity and effort that went into these ornaments. Thanks to Carl Jacobson for co-hosting the challenge. http://www.AsWoodTurns.com Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Snowman Stocking Hanger ·
By: RJBWoodTurner
December 25, 2016 · 1,781 views

We don't have a fire place in out new home so my wife asked me to make a Snowman Stocking Hanger. It will allow us to continue our tradition of hanging stockings on Christmas Eve. It is a very simple project that could be made in a day. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

FOR CHRISTMAS/ THE BILLIARD BALL PROJECT! ·
By: Nick Zammeti NZ WoodTurning
December 25, 2016 · 119,469 views

MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ SEND ME STUFF FAO NICK NZ WOODTURNING PO Box 363 ROMSEY SO51 1DY UNITED KINGDOM SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nzwoodturning/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ CHECK OUT MY VLOGGING CHANNEL. https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ CHECK OUT MY GIVEAWAY CHANNEL https://www.youtube.com/channel/UCb4AtBzCeVzGEEbM_4394dA

 

Twas the Night before Christmas, Willem's Woodnotes ·
By: Willem Kossen
December 24, 2016 · 195 views

It's Christmas Time. Christmas is a time of song and poetry. Rick Wilke challenged me on facebook to read the poem Twas the Night before Christmas. And here it is. I added a little Christmas Woodturning project as a backdrop, turning a little Christmas tree from Walnut. Im getting a lot more confident with the skew chisel lately. It's prominently featured in this project, as well is the large mortising chisel i've shown before, which i use for roughing out the blank. Links: Rick Wilke: https://www.facebook.com/wilkewoodshop Rick Wilke Channel: https://www.youtube.com/channel/UCgVpxu-zkc37MKz

 

18 - Of Shepherds and Angels (Ornaments) ·
By: Bill Rockwood
December 24, 2016 · 102 views

I make a couple of small ornaments, Shepherds and an Angel , in honor of Christmas.

 

My Angel Make an angel in 15 min ·
By: Rebel Turner
December 22, 2016 · 2,043 views

Turned a few little Christmas decorations in shape of an Angel. Cut a few disks from same wood (China Doll) fir the wings and shaped them on the scroll saw, Glued them on a flat spot with medium CA glue. Great last minute gift

 

VFD Whine noise removed I turn a Christmas tree by Al Furtado ·
By: Rebel Turner
December 20, 2016 · 1,759 views

What better test can I show and what more appropriate symbol for this Wonderful gift of life. Merry Christmas to all my friends I want to tank my friend Steve Miller on FB for mentioning the name Carrier frequency. with that I was able to find the perimeters to adjust it.

 

Wood Turning a Small Christmas Tree Art Deco Style ·
By: SP Wood Art
December 18, 2016 · 506,794 views

This video shows the process I used to make a wooden art deco style small Christmas tree. Wood turning small trees is an excellent way to practice spindle work on a wood lathe. I hope you enjoy this video and Happy Holidays. If you would like see more of SP Wood Art visit us at: www.spwoodart.com Our Webpage www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural stone or acrylic) that connect to people on an emotional and functional level. Ea

 

17 - Saving a Special Christmas Ornament ·
By: Bill Rockwood
December 18, 2016 · 131 views

I turn a small base of Koa wood to save a cherished Christmas ornament.

 

Christmas Ornament Challenge Long Version 2016 ·
By: Turning Round
December 17, 2016 · 241 views

In this wood turning video I do an inside out turning and glue up and a second wood turning, with a segmented turning. I use Alumilite Casting for the center around a Christmas Tree. This was a fun project but a long one with many steps. This is for the Carl Jacobsen and As Wood Turns Christmas Ornament Challenge 2016.

 

Jingle Bell - Ornament/Bottle Stopper ·
By: Maple-Crossing Woodworks
December 11, 2016 · 138 views

I couldn't decide if I wanted to make an ornament for my Christmas Tree, or another Bottle Stopper, so I decided not to decide. This was a fun project and something that can be used year round!

 

A Deer For Christmas - Episode 43 ·
By: Paul Lockwood
December 10, 2016 · 649 views

Using some Oak cut to size on the band saw for the blanks. Most work was done with the skew where possible. Everything was given at least two coats of sanding sealer and all apart from the antlers got a coat of Bees Wax and Carnauba Wax. I hunted all over the web for any examples and could not find anything like this turned on the lathe. Music Wish Background Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Turn a Christmas Tree Decoration ·
By: Mike Peace Woodturning
December 09, 2016 · 34,084 views

I demonstrate woodturning small Christmas trees suitable for Christmas tree ornaments or simply as table decorations. This is a fast, fun and easy wood lathe project! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Viewers Choice Christmas Ornament Challenge 2016 ·
By: As Wood Turns
December 09, 2016 · 3,660 views

http://www.AsWoodTurns.com What a fantastic challenge. This video shows all ornaments that were entered into the challenge. We invite you to vote for your favorites. This is an experiment - we hope it works. Here are the guidelines. 1. Review this video and the ornaments. These are in random order but the number in this video corresponds to order in the official playlist. Note which that you’d like to see the video for. 2. View the supporting videos from your list. The video should be part of your decision. 3. In a comment below this video, enter up to 5 numbers that represent your favorite

 

Woodturning Christmas Ornaments ·
By: Mike-N-Texas Woodturning
December 09, 2016 · 4,215 views

Mike Turns Wooden Christmas Ornaments

 

#18 Woodturning a maple snowman! Easy Christmas project :) ·
By: PolishWoodturner
December 06, 2016 · 7,844 views

Hi there! I made a couple of maple snowmen. It's easy and very funny project which can be done very quickly. If you like the video, please subscribe to my channel, click like button or share the video!:) Thanks for watching! Marcin ------------------------------------------------------ You can find me also on Facebook! https://www.facebook.com/polishwoodturner

 

Hand woodturning a Xmas tree ornament. ·
By: woodturner21
December 05, 2016 · 20,905 views

It's Kiln Dried Elm Ok! believe it or not all the time I have been turning I have never been asked to make a Xmas tree ornament. At 5.30pm I am just about to finish work after an eleven and half hour shift and a friend from the factory nextdoor walks in and says 'Can you make Christmas trees for an ornament?' I said watch me. So I put my overalls back on, placed the phone on the 2'x2' and turned one for the very first time straight off the cuff.

 

Woodturning snowmen ·
By: Charlie Woodturner
December 03, 2016 · 163 views

Production turning snowmen, using roughing gouge, skew chisel and parting tool

 

WOODTURNING A CHRISTMAS DECORATION! ·
By: Nick Zammeti NZ WoodTurning
December 02, 2016 · 4,481 views

So I decided to make a Christmas gift. it’s a Christmas decoration. Happy Christmas everyone. Here the details on UKIWS if you wanted to attend. Its next year in July 2017 http://www.ukiws.co.uk/ Music By https://www.pond5.com/stock-music/31867366/whistling-ukulele.html SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nzwoodturning/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

Christmas Wand ·
By: Erick Wood
December 01, 2016 · 176 views

2016 Christmas Ornament Challenge

 

Woodturning Santa Hat Christmas Ornament with Candy! ·
By: Wood Frontier
December 01, 2016 · 625 views

This ornament is a woodturned Santa's hat. Inside is the perfect space to hide a chocolate kiss. The wood Christmas ornament box is made of box elder . The wooden santa hat is turned much like a wooden box is made on a lathe. Essentially it is a woodturned box. I used a variety of tools including my skew chisel, spindle gouge, bedan tool, and a scraper. The ornament held into a four jaw scroll chuck and later with a friction fit 'jam chuck' as I finished it off. The friction fit when woodturning can be a little fiddly to get right sometimes, but it is a nice way to hold pieces onto the

 

Turning an Ornament from Last Year's Tree (Christmas Ornament Challenge 2016) ·
By: Ben Barwick
November 30, 2016 · 226 views

I turn an ornament out of a section of last year's Christmas tree's trunk. The ornament was painted with acrylic paints, sanded to 600 grit, and finished with gloss poly. Want one of these turned from your own tree for your own? Click below: http://waystonewoodworks.com/from-tree-to-ornament/ If you like what I am doing check out my social media and website. If you are interested in purchasing an item, check out my website or etsy page below. You can also support me by using any of the 'Tools I Use' links below to purchase anything from Amazon: www.waystonewoodworks.com www.facebook.com/way

 

Advent Wreath - The Christmas Ornament Challenge 2016 ·
By: PeteTGIF
November 30, 2016 · 535 views

Advent Wreath Made from Oak, Beech and Birch. Most of the wooden parts had been firewood. This is my entry for the 'The Christmas Ornament Challenge 2016' by Allan Stratton and Carl Jacobson. I wish everyone a peacefull Christmas and a Happy New Year 2017. Music by Kevin McLeod, http://www.incompetech.com Lizenz Creative Commons 3.0 http://creativecommons.org/licenses/by/3.0/deed.de

 

#72 2016 Christmas Ornament Challenge ·
By: Yuval Lahav Woodturning
November 30, 2016 · 3,614 views

So it's that time of the year again, and with a few seconds to spare, I decided to take a go at the Christmas Ornament Challenge. It didn't work to plan, but I won a good sized egg out of it, so hey, it's better then nothing! :) Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Greg Atkinson - Losing Over Christmas Cullah - Comfort To You All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: TOMTURNS.COM,

 

Christmas Ornament Challenge 2016 ·
By: Turning Round
November 30, 2016 · 1,784 views

In this video I do an inside out turning, with a segmented turning, and an Alumilite Casting center around a Christmas Tree. This was a fun project but a long one with many steps. This is for the Christmas Ornament Challenge 2016.

 

2016 Ornament challenge- Natural edge bell: Making of ·
By: Michael Zurcher
November 30, 2016 · 352 views

Woodturning, Making, Creating: I show you how I make a rustic natural edge bell christmas ornament inspired by the Work of Cindy Drozda. This is my first entry into the Ornament challenge. I have only been wood turning since August 2016 so I still have a lot to learn! But it's been a fantastic journey so far! Happy holidays! Thanks for watching! Please feel free to comment, like, share, & I'd love to have you as a subscriber if you aren't already! :) Sticker swap? Send your sticker to the address listed below & I will send you one back. Thanks! :) Michael Zurcher 313 Gordon Drive Exton, PA 19341 Check out my Instagram here: https://www.instagram.com/michael_zurcher

 

Christmas Ornament Challenge 2016 ·
By: Peter Woodbine
November 29, 2016 · 695 views

My entry to this year's challenge - 'Santa in a Spin' Scrollsaw Santa in several different wood species spinning in a turned ring. Music by courtesy of Teknoaxe - http://www.youtube.com/user/teknoaxe

 

Woodturning with The Old Woodworker 2016 Christmas Ornament Challenge ·
By: H F Bowern Designs - Harold Bowern
November 29, 2016 · 891 views

Welcome back This is my entry for the 2016 Christmas Ornament Challenge. It is a series of model trains made from wooden doweling and scraps from my shop. The Train engine has a cab (7/8” dia. Turning 3/4” long) a boiler (5/8” dia. turning 1 ” long) and a smoke stack (3/8” dia. 5/8” long with a ” tenon) all mounted on a ” piece of wood 1” wide and 2 ” The tanker has a body (5/8” dia. 2 ” long) mounted on a ” piece of wood 1” wide and 2 ” The caboose a body (3/4” square 2 ” long) mounted on a ” piece of wood 1” wide and 2 ” Each of the cars received wheels that were made from 3

 

Spalted Snowman for Christmas 2016 Challenge ·
By: Atkinson Woodturning
November 29, 2016 · 871 views

This is the 6th video that I recorded. I was using my cell phone and was not able to get all the shots of me working that I would like. Please forgive the quality of this video I since purchased a good video camera and will be working with professionals on bringing up the quality of my lighting and video. Wood type: Spalted Maple Finished Diameter: 6' Finished Height: 13' Started out as a piece of limb wood. I want to upload a new project video every other week on Saturday (if at all possible, I am a stay at home Dad and my little boys rule my time). Thank you for supporting me in this end

 

Medallion Ornament ·
By: Derek Oliver
November 29, 2016 · 585 views

After the Yellow Bellied Chicken ornament, I figured I owed Peter an ornament that had a little more goodwill towards mankind and a little less third grade playground taunting. The Chicken Ornaments: https://www.youtube.com/watch?v 6Lns6saFA0M

 

Christmas ornament challenge 2016 - Turning a Christmas robin ·
By: Woodturning with Owen
November 29, 2016 · 3,270 views

This video is going to be my entry into the 2016 Christmas ornament challenge. Thank you for watching, Music: www.bensound.com Youtube audio library

 

Turning a Snowflake - Christmas Ornament Challenge ·
By: David K
November 28, 2016 · 828 views

My entry for this years 'Christmas Ornament Challenge' by Carl Jacobson and Allan Stratton. I want to thank both of them to bring us together for something that is really great!! - Used woods are Spalted Maple, Pear and Ash. - Carved snowflake filled with glue and gold glitter - Few coats with clear lacquer I also made a stand out of brass for the right presentation ; ) Please enjoy, and a comment would be very appreciated! https://www.facebook.com/davidkholz/ If you want to see more, click here: https://www.youtube.com/davidkholz?sub_confirmation 1 Um meinen Kanal zu abonnieren, klicke bitte hier: https://www.youtube.com/davidkholz?sub_confirmation 1 _____________________________________________________ Music: Eternal Hope von Kevin MacLeod ist unter der Lizenz Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) lizenziert. Quelle: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100238 Interpret: http://incompetech.com

 

Segmented Christmas Ornament! ·
By: The Russian Woodworker
November 28, 2016 · 546 views

In this video i show you how i mare my Christmas or ament for the annual 2016 Christmas ornament challenge hosted by Allan stratton and Carl Jacobson. Other videos: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg

 

2016 Ornament Challenge: Elizabeth's Entry ·
By: Make Crazydays
November 28, 2016 · 892 views

Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

Christmas Ornament Challenge video ·
By: Mark Choitz
November 28, 2016 · 565 views

This is my entry for the Christmas Ornament Challenge - 2016. Turning a maple burl & alumilite light up Christmas ornament.

 

DIY - Turning Snowman Ornement ·
By: Chapman Crafters
November 28, 2016 · 159 views

This is a personalized set of snowman ornaments that I made for my neighbors, I'm also entering this in the 2016 Christmas Ornament Challenge - - - - - - Please watch: 'DYI - Silicone Mold for Pen Blanks' https://www.youtube.com/watch?v _engdA0K-wQ - - - - - -

 

Rustic Robin Red Breast !! (Christmas ornament challenge 2016) ·
By: Templeboy Turnings
November 27, 2016 · 1,321 views

This is my entry to carl Jacobson's and Alan Stratton's Christmas ornament challenge 2016. This robin redbreast is turned from a sycamore branch and one poplar pen blank. I turned it using only a variety of skews !!! The glasses are a small fridge magnet. Thank you Carl and Allan for another fantastic and successful Christmas challenge !! Good luck to everyone that has entered !! Music Deck the Halls by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUA

 

Spalted Beech Christmas Tree - Episode 41 ·
By: Paul Lockwood
November 27, 2016 · 534 views

Following on from the Snowman in the previous project (#40) I decided to have a go at a Christmas Tree. This was done using spalted beech this time which I think suits the subject perfectly. A quick fun project which the piece was sanded to 320, two coats of Sanding Sealer, Yorkshire Grit and finally two coats of Woodwax22. Thoroughly recommed Yorkshire Grit! Website: www.yorkshire-grit.com Facebook: https://www.facebook.com/Yorkshire-Grit-1198311676855162/ Music River Went Dry (Instrumental) Follow The Road, Tick Tock and Evolution By Josh Woodward http://freemusicarchive.org/music/Josh_Woodward/ From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/legalcode Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

2016 Christmas Ornament Challenge Santa's Hot Air Balloon ·
By: Daniel Vilarino
November 27, 2016 · 1,403 views

Hola/Hi! Este video está en Inglés, para verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/rtTi-rbY8w4 ***This video is in English*** Este video es en respuesta al desafío para el adorno navideño 2016 auspiciado por Carl Jacobson y Alan Stratton. ***This video is answering the 2016 Christmas Ornament Challenge sponsored by Carl Jacobson and Alan Stratton.*** El siguiente es el enlace a la lista de videos del desafío para el año 2016. ***The following is the link to the 2016 Challenge Playlist*** https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOu

 

Christmas Ornament Challange 0001 ·
By: Northern Woods Turning
November 26, 2016 · 339 views

Christmas Ornament Challenge 2016 - Martin Young - Northern Woods Turning

 

Woodturning Project Santa Claus ·
By: Carl Jacobson
November 25, 2016 · 16,734 views

I made this Santa Claus out of maple and Walnut. He's 7' tall and 4' at his widest point. I turned all the pieces on the lathe accept for the bag, I shaped that on the band saw. Christmas Ornament Challenge http://www.aswoodturns.com/ Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and

 

Oak Snowman - Episode 40 ·
By: Paul Lockwood
November 25, 2016 · 419 views

Getting closer to Christmas and I have been looking around at various Christmas options to make. In the end I decided to go for a basic snowman but with a twist. The eyes and mouth were all cut out with the rotart tool and filled with the wax sticks that I used on the much earlier project when I made the clock for the workshop. Using a piece of quite wet oak (up to 20% registered on the outside and 30% inside) it turned very well. I didn't like the idea of a snowball body so decided on the gentle curves. The hat made seperately and left loose on the top rather than gluing it on. This could a

 

Traditional Hollow Globe Christmas Ornament ·
By: As Wood Turns
November 25, 2016 · 2,442 views

http://www.AsWoodTurns.com In a recent comment, a viewer asked if I was going to use my shop built hollowing tools to turn an ornament this year. Well, I had not intended to, since I was busy exploring hollowing through larger, more convenient holes. But I took it as as challenge and made this traditional globe ornament. To me, a traditional globe is designed to hang from a Christmas tree and consists of 1. A hollowed body of somewhat globe shape. Almost anything goes here and has been the target of a lot of creativity in Christmas Ornament Challenges, 2. A top finial - either short or long

 

Wood turning a snowman ornament ·
By: Tommy Akridge Designs
November 24, 2016 · 3,119 views

This video is about making a snowman from a 1' dowel rod My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Segmented Wood Christmas Tree Bell ·
By: SIS Woodworking
November 24, 2016 · 11,390 views

Segmented Wood Christmas Tree Ornaments. The design, cutting segments, glue up and turning in the lathe to produce small and highly decorated segmented wood bells which are used as Christmas Tree Ornaments. http://www.sisweb.com/wood

 

Harry the snowman. 2016 ornament challenge ·
By: Todd Halleman
November 23, 2016 · 545 views

Here is my ornament for the 2016 ornament challenge. It is a snowman named Harry. Body is made of maple, and hat is made of buckeye.

 

Christmas Ornament Challenge 2016 ·
By: Make Crazydays
November 22, 2016 · 615 views

Glory to God in the highest, and on earth peace among those with whom he is pleased! - Luke 2:14 About two years ago a neighbor allowed me to grab a couple pieces of walnut from a few trees he was having harvested in his yard. Originally I was hoping to make a bowl for him, but most of the wood cracked in drying, but I did have a large enough piece remaining to make this ornament for him. Christmas Ornament Challenge 2016 Playlist: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

Improved Snowman from Sycamore, Ebony and Padoek ·
By: The Woodworking Shed
November 22, 2016 · 4,578 views

In this video I improved on my first snowman with the addition of some ebony buttons and eyes and a padoek nose

 

Woodturning Q&A Snowman Follow-up ·
By: Carl Jacobson
November 21, 2016 · 1,077 views

I'm still trying to giveaway some free tools!! Christmas Ornament Challenge ends November 30th Christmas Ornament Challenge Playlist https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Scott at The Sonoran Woodshop-https://www.youtube.com/watch?v -s7riGdwPd8 Pat at Le PicBois-https://www.youtube.com/watch?v Lgw-zmDCEpk Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodsh

 

Χιονάνθρωπος-Snowman ·
By: Μάκης Καλτσίδης
November 21, 2016 · 217 views

Κατασκευή χιονάνθρωπου σε ξυλότορνο για δώρο η για στολίδι σε Χρισουγεννιάτικη διακόσμηση. Woodturning snowman excellent for a gift or for decorating christmas tree.

 

Baby's First Ornament (Christmas Ornament Challenge 2016) ·
By: Ben Barwick
November 20, 2016 · 422 views

I make a hollowed ornament from spalted maple and walnut. I tried out an idea for personalizing it with the baby's nickname and birth year with mixed results due to my own poor handwriting. [This is my entry for the Christmas Ornament Challenge 2016.] Christmas Ornament Challenge 2016 Playlist: https://goo.gl/a6qAJL If you like what I am doing check out my social media and website. If you are interested in purchasing an item, check out my website or etsy page below. You can also support me by using any of the 'Tools I Use' links below to purchase anything from Amazon: www.waystonewoodworks.

 

Woodturning a Segmented Christmas Ornament #3 ·
By: Fiaschetti Woodworking
November 20, 2016 · 134,348 views

Please visit my new website http://www.fiaschettiwoodworking.com/ This ornament is made of Cherry, Maple, Walnut, and Purple Heart. There are a total of 126 pieces. It is 3 inches long by 1.5 inches wide. This is my submission to the 2016 Christmas ornament challenge. If you have any questions please email me at: fiaschettiwoodworking@gmail.com

 

Christmas Oranment and Spinning Top ·
By: Turntastic Wood Designs
November 20, 2016 · 108 views

An extra special way to say Merry Christmas

 

Woodturning Project Snowman/Couple ·
By: Carl Jacobson
November 18, 2016 · 16,661 views

I turned this this snowmen/couple out of Maple and Osage orange. I turned most of the project on the lathe. The arms are the only thing I didn't turn on the lathe. The woman is 7 1/2' tall and the man is 8' tall. Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online class

 

Turning A Snowman ·
By: Seganti Woodworking
November 18, 2016 · 22,344 views

DESCRIPTION: Turning holiday ornaments is a fun and easy way to make gifts for all those people on your holiday list. This video walks you through the process of making a cool little snowman. MATERIALS USED: Milliput: http://amzn.to/2g3bCmA Scarf (Ribbon): http://amzn.to/2f5pDLl Shellawax Liquid Friction Polish: http://amzn.to/2f5yXPh Gloves: http://amzn.to/2f5qpbd TOOLS USED: Spindle Roughing Gouge (SRG) Parting Tool (1/8') Spindle Gouge (3/8') Skew Chisel (1') Drill Bits (3/16', 3/32') Calipers FOLLOW US: Twitter: https://twitter.com/SonoranWoodshop Instagram: https://www.instagram.com/sonoranwoodshop/ Facebook: https://www.facebook.com/sonoranwoodshop

 

Atomic Christmas Ornament For 2016 Ornament Challenge ·
By: As Wood Turns
November 17, 2016 · 2,620 views

http://www.AsWoodTurns.com Accepting videos for the Christmas Ornament Challenge at http://www.AsWoodTurns.com/Challenges This Christmas season I've largely avoided hollowing through small holes. This ornament is another such project where I prefer to hollow through the largest opening possible. In this case the largest opening equals the diameter of the ornament. For accent the walnut blank was saw at a random angle; the cut was cleaned up and a strip of oak glued in the kerf. I repeated this process a couple more time before mounting to my lathe. On the lathe, I used the perfect sphere p

 

Wood Turning a ornament ·
By: Tommy Akridge Designs
November 17, 2016 · 5,956 views

This video is about the 2016 Christmas Ornament challenge sponsored by Alan Stratton and Carl Jacobson My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

2016 Ornament Challenge - Miniature ·
By: Barry's Woodturning
November 14, 2016 · 3,066 views

This year I decided to turn a miniature ornament for the challenge. Turning something this small is not as fast as I thought it would be. You have to slow down and make small cuts. It also gave me a chance to put some new tools to use. I made the miniature scraper and detail tool using some HSS I bought online: https://www.youtube.com/watch?v skVlV-l4QhE Thanks to Carl Jacobson and Alan Stratton for hosting the Ornament Challenge. Playlist: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Contest announcement: http://www.aswoodturns.com/challenges/ https://www.youtube.com/watch?v psSjljDTtvU&index 1&list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Music by Jason Shaw @ audionautix.com

 

Chickadee Ornament - Short Version ·
By: Mike Peace Woodturning
November 13, 2016 · 1,677 views

I demonstrate how to woodturn a cute Chickadee bird ornament. This is my entry for the 2016 Ornament Challenge. Hollowing is done by simply drilling out and plugging the bottom. Click here https://youtu.be/07NauF_FsFU for the full length version of this project. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html Music: Wish Background by Kevin Macleod

 

Woodturning 2016 Christmas challenge - wooden bells ·
By: Marc 's Oneway of turning
November 13, 2016 · 1,542 views

3 small wooden bells made with exotic wood. Thanks for watching. Ma chaîne française ici: https://www.youtube.com/channel/UC83rt1EvRU51x9P93BPr0Hw/videos

 

First Snowman ·
By: The Woodworking Shed
November 13, 2016 · 451 views

In this project I created my first snowman on the lathe.

 

2016 Christmas Ornament Challenge ·
By: Kostas Annikas Deftereos
November 12, 2016 · 1,460 views

Aυτή είναι η δική μου συμμέτοχη στο 2016 Christmas Ornament Challenge ελπίζω να σας άρεσε και να βρήκατε χρήσιμες τις πληροφορίες που σας δίνω !! Από κάτω σας βάζω τα link των διοργανωτών και φυσικά το link του διαγωνισμού 2016 Christmas Ornament Challenge https://www.youtube.com/watch?v psSjljDTtvU http://www.AsWoodTurns.com Carl Jacobson Youtube https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Youtube https://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ Easy https://www.etsy.com/shop/Thewoodshoptv Website http://www.thewoodshop.tv/ Google https://plus.google.com/1131999045658... Facebook https://www.facebook.com/carljacobson68 As Wood Turns Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns μπορειτε να με βρειτε επισης στις παρακατω σελιδες facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos

 

Christmas Ornament Challenge 2016 ·
By: aesop717
November 12, 2016 · 1,292 views

Redheart, Holly, and basswood strips are used to create this innovative Christmas ornamnet.

 

New dye-na-flow paint for Christmas ornaments ·
By: The AZ Viking
November 12, 2016 · 32 views

I talk a Lil bit about some new paint I've ordered today and how I like it so far

 

Inside Out Christmas Ornament ·
By: Maple-Crossing Woodworks
November 11, 2016 · 4,393 views

My first successful inside-out turning. This is a very simple ornament but shows one way of completing an inside-out project. I'm guessing I'll be doing more of these this winter

 

Finial Star - Christmas Ornament ·
By: Walter Wager
November 11, 2016 · 902 views

Create a finial star ornament

 

Woodturning a Christmas decoration ·
By: Andrew Whale
November 10, 2016 · 457 views

Inspired by an article in Woodturning Magazine (Dec 2016), so I thought I would give it a try. In hindsight I should have probably used timber 35mm square rather than 45mm. It would have saved some time on the spindle roughing gouge but, then again, you need to practice, practice, practice. I'm pleased that I had an event free time with the scary skew. I also enjoyed using the light pull friction drive for the first time. I hope you find the video useful - but please remember I'm a novice turner. Cheers. Disclamer: I do not recommend any of the methods/techniques I use as these could be unsafe. Woodturning is a potentially hazerdous activity and it is your responsibility to use proper methods/techniques and follow appropriate health and safety practices.

 

Making a Snowman on the Lathe - Part 3 ·
By: DentonTurners
November 09, 2016 · 1,913 views

Marion McDaniel has simultaneously belonged to more than a dozen woodturning clubs and has served on the SWAT board of directors for the past 18 years. Demonstrating his woodturning skills at SWAT and virtually every club around, Marion is best known for his snowmen – completing more than 6,000. Marion shows us how he turns a snowman on the lathe. This demonstration is split into three parts.. Part 1 - Turn and shape the snowman Part 2 - Sand and Buff the snowman Part 3 - turn the nose, add the eyes, mouth, button, and arms This demonstration was filmed at the November 2016 meeting of the Golden Triangle Woodturners in Denton Texas. OUr meetings are open to the public. The club meets the first Monday of each month at 7PM in the Center for the Visual Arts located at Hickory and Bell Streets in Denton, Texas. http://www.goldentrianglewoodturners.org

 

Making a Snowman on the Lathe - Part 2 ·
By: DentonTurners
November 09, 2016 · 1,896 views

Marion McDaniel has simultaneously belonged to more than a dozen woodturning clubs and has served on the SWAT board of directors for the past 18 years. Demonstrating his woodturning skills at SWAT and virtually every club around, Marion is best known for his snowmen – completing more than 6,000. Marion shows us how he turns a snowman on the lathe. This demonstration is split into three parts.. Part 1 - Turn and shape the snowman Part 2 - Sand and Buff the snowman Part 3 - turn the nose, add the eyes, mouth, button, and arms This demonstration was filmed at the November 2016 meeting of the Golden Triangle Woodturners in Denton Texas. OUr meetings are open to the public. The club meets the first Monday of each month at 7PM in the Center for the Visual Arts located at Hickory and Bell Streets in Denton, Texas. http://www.goldentrianglewoodturners.org

 

Making a Snowman on the Lathe - Part 1 ·
By: DentonTurners
November 09, 2016 · 2,646 views

Marion McDaniel has simultaneously belonged to more than a dozen woodturning clubs and has served on the SWAT board of directors for the past 18 years. Demonstrating his woodturning skills at SWAT and virtually every club around, Marion is best known for his snowmen – completing more than 6,000. Marion shows us how he turns a snowman on the lathe. This demonstration is split into three parts.. Part 1 - Turn and shape the snowman Part 2 - Sand and Buff the snowman Part 3 - turn the nose, add the eyes, mouth, button, and arms This demonstration was filmed at the November 2016 meeting of the Golden Triangle Woodturners in Denton Texas. OUr meetings are open to the public. The club meets the first Monday of each month at 7PM in the Center for the Visual Arts located at Hickory and Bell Streets in Denton, Texas. http://www.goldentrianglewoodturners.org

 

ΚΑΜΠΑΝΑ-CHRISTMAS BELL ·
By: Μάκης Καλτσίδης
November 06, 2016 · 242 views

Christmas woodturning bell by Matthew.A handmade ornament for Christmas tree. Κατασκευή ξύλινης καμπάνας για το Χριστουγεννιάτικο δένδρο.

 

Spindle Gouge cuts and Christmas Ornaments ·
By: Woodturners of Southwest Missouri
November 06, 2016 · 2,506 views

Anthony Harris demonstrates the different cuts with a spindle gouge and then makes Christmas Ornaments for the Woodturners of Southwest Missouri. Anthony did a fantastic job of teaching the proper use of a spindle gouge. He has demonstrated several times for our club and is back on the calendar in the near future. Check out Anthony's website at: http://acmepipes.com/ Visit our clubs website at: http://www.woodturnersofswmo.org/ Please forgive the audio on this video, we had issues we had not experienced before. Still ... this is a very good demo!

 

Turning a Cast Resin Christmas Ornament: 2016 Sam Angelo ·
By: WYOMINGWOODTURNER
November 05, 2016 · 6,667 views

Sam shows how he turns a cast resin ornament. (NO casting in this vid...) BUT MORE Important.....The Chicago Cubs are World Champions for 2016. History has been made!

 

Christmas Ornament 2016 ·
By: Mauro il tornitore
November 04, 2016 · 1,273 views

An ornament for the Challenge 2016. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un ornamento natalizio. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Inside Out Christmas Ornament For 2016 Challenge ·
By: As Wood Turns
November 04, 2016 · 23,372 views

http://www.AsWoodTurns.com Turned wood inside out ornaments give me a certain fascination. Turning one presents some difficulties and risks -- all of which can be quickly resolved except one. The most difficult part is visualizing the empty space to be created inside the ornament. I've tried to model it. One thing that has worked the best is to make a turning with 1/4 inch steps every 1/4 inch. Then when reversed and turned, some visualization of scale is possible. To begin, an inside out blank is constructed from four perfectly square milled pieces of wood. Some turners put craft paper in t

 

THE WITCH OF EASTWICK! ·
By: Nick Zammeti NZ WoodTurning
October 31, 2016 · 1,816 views

Its Haloween 2016..... dont be scared now! Music By https://soundcloud.com/danijel-zambo https://danijel-zambo.bandcamp.com/ Heres the black diamonds I mentioned http://www.ebay.co.uk/itm/261580283155?_trksid p2057872.m2749.l2649&var 560452754701&ssPageName STRK%3AMEBIDX%3AIT SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nzwoodturning/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

Bark Edge Birdhouse Ornament by Sam Angelo ·
By: WYOMINGWOODTURNER
October 29, 2016 · 20,861 views

As the Christmas season approaches, Sam turns a rustic birdhouse ornament with an area of bark edge. Link to a video on the markers I use: Colored Markers video: https://www.youtube.com/watch?v eqs9-az827k

 

10 Tips for Woodturned Ornaments - After the turning ·
By: Mike Peace Woodturning
October 28, 2016 · 3,269 views

I show lots of tips and tricks for wood turned ornaments dealing with Hangers, Ribbon, Signing, Details that matter, Finishing, Packing, and Ornaments Stands. Little details can add value to your woodturnings. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html Source for screw eyes http://ptreeusa.com

 

Stylized Pumpkin Just In Time For Halloween ·
By: As Wood Turns
October 28, 2016 · 4,909 views

http://www.AsWoodTurns.com I'm always on the lookout for a project idea that I can adapt to a turning project. While visiting my daughter in law, she had an adorable stylized pumpkin made from canning jar rings with cinamon stick rolls as the stem. Immediately, the thought came 'Can I do this as a woodturning'. There were some immediate differences. Canning jar rings tend to nest together. For a wood project, I would have to taper the rings. And there would have to be a lot of rings. In fact, this project is all about making the tapered rings. My initial plans for efficient tapering did not

 

The Acrylic Finial Bauble. My Entry for the 2016 Christmas Ornament Challenge ·
By: Jimson's Stuff
October 27, 2016 · 3,338 views

This is my entry into the 2016 Christmas Ornament Challenge that is set up and run by Carl Jacobson and Alan Stratton. The decoration is constructed from clear and coloured transparent acrylic sheets and a clear acrylic rod. It was turned using hand tools on a wood lathe with a combination of Robert Sorby zero jaws and a pen mandrel. Drill size 1/4 inch. Polished with a combination of Yorkshire Grit and Chestnut products Burnishing Cream. http://yorkshire-grit.com/ Carl Jacobson's YouTube channel and website; https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg http://thewoodshop.tv/ Ala

 

Norfolk Pine Christmas Ornament. ·
By: Well Rounded Woodturning
October 26, 2016 · 253 views

Norfolk Pine with Milo finial Christmas Ornament. Music is Far Away Coast by Koresma. Thanks for watching!

 

Arbortech Christmas decorations ·
By: Axminster Tools & Machinery
October 25, 2016 · 1,754 views

High power 750W electric motor for easy timber removal in the hardest woods. Ideal for precision joints, recesses, rebates and corners. Great detail and control possible. Dustless timber removal. This kit is supplied complete with a 20mm flat chisel, a 20mm gouge chisel and high pressure lubricant. To purchase: http://www.axminster.co.uk/arbortech-pch350-power-chisel-701802 ---------------------------------------------------------------------------------------------- Shop - http://www.axminster.co.uk Blog - http://knowledge.axminster.co.uk/ Facebook - https://www.facebook.com/axminstertoolcentre eBay Store - http://stores.ebay.co.uk/axminstertoolcentre Call (UK) - 0800 371822

 

Le PicBois #39 - Christmas Cheeseburger Ornament ·
By: Le PicBois
October 24, 2016 · 2,032 views

[ This is my entry for the 2016 Christmas Ornament Challenge hosted by Alan Stratton & Carl Jacobson. ] 2016 Christmas Ornament Official Playlist: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Last year's project: https://www.youtube.com/watch?v NY0ViqUI6pI Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois Special Thanks: Easy Wood Tools: https://www.youtube.com/user/EasyWoodTools Alan Stratton: https://www.youtube.com/user/AsWoodTurns Carl Jacobson: https://www.youtube.com/user/haydenHD _______________________________________________________ I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.me/lepicbois

 

Laser Cut Inlay Christmas Ornament ·
By: Carl Jacobson
October 21, 2016 · 10,749 views

The Christmas Ornament Challenge is now underway. I look forward to seeing what you come up with again this year. Ron Brown's Best- http://ronbrownsbest.com Submit your entry- http://www.AsWoodTurns.com/Challenges I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more than

 

Christmas Ornament Challenge 2016 ·
By: Carl Jacobson
October 19, 2016 · 10,796 views

Christmas Ornament Challenge 2016! Submit your entry at, http://www.aswoodturns.com/challenges/ I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more than happy to help. Robust Woodturning Tools-http://www.turnrobust.com/ Easy Wood Tools-http://www.easywoodtools.com/ Wood Tur

 

Nativity scene - Presepe ·
By: Mauro il tornitore
October 19, 2016 · 1,349 views

A many wood Nativity scene for the Christmas Challenge 2016. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks to everyone , to Alan and to Carl. Mauro Un Presepe multi-legno per la sfida di Natale 2016. Spero vi piaccia il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie a tutti, ad Alan ed a Carl. Mauro

 

2016 Christmas Ornament Challenge ·
By: As Wood Turns
October 19, 2016 · 3,412 views

http://www.AsWoodTurns.com We're announcing the Fifth Annual Christmas Ornament Challenge. This year the challenge is officially open to all crafts. To enter, video you making your ornament and upload it to your YouTube channel. Then at http://www.AsWoodTurns.com/Challenges, complete the form. But sure you get a successful confirmation message. The challenge ends midhight November 30, 2016 We'll announce winners in December. Again. the challenge is open to ornaments from all crafts and combination of crafts. Alan's Website: http://www.AsWoodTurns.com Carl's Website http://www.TheWoodShop.tv Where to submit video: http://www.AsWoodTurns.com/Challenges

 

Christmas Bell Ornament ·
By: Donny Lawson
October 17, 2016 · 105 views

This Ornament is made from Spalted Pecan.

 

Wood turning a Halloween Pumkin ·
By: Tommy Akridge Designs
October 13, 2016 · 4,278 views

This little video is a fun little video about making a wooden pumpkin for halloween. My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases and many other things . some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

This is How I Turned an Angel Ornament ·
By: RJBWoodTurner
October 12, 2016 · 2,043 views

I watched a Mike Peace video about turning an Angel Ornament and it inspired me to try one. This was a simple yet fun turn and I will be making many more. Regards, Bob Mike Peace’s Angel Ornament Video: https://www.youtube.com/watch?v QTtQB6Jly_8 Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

segmented plywood globe ·
By: Steve Krumanaker
October 09, 2016 · 13,829 views

Easy to do segmented plywood glue up for Christmas ornament globes.

 

Figura di donna con tornitura disassata - Multi axis female figure ·
By: Mauro il tornitore
October 08, 2016 · 857 views

Una figura femminile stilizzata ottenuta con la tecnica della tornitura multiasse al tornio. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro A female figure from a log of spalted beech with the multi axis turning. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro

 

Up Up & Away! Part 2 - Hot Air Balloon Ornament ·
By: Mike Peace Woodturning
October 07, 2016 · 1,741 views

In Part 2 I turn and texture the gondola, color and assemble the completed ornament. Click here https://youtu.be/EJftCWGvHTo To to watch Part 1 where I demonstrate turning a hot air balloon ornament on a wood lathe and hollowing it out. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Up Up and Away - Part 1 of 2 - Hot Air Balloon Ornament ·
By: Mike Peace Woodturning
October 07, 2016 · 1,746 views

In Part 1 I demonstrate turning a hot air balloon ornament on a wood lathe and hollowing it out. Click here https://youtu.be/o2a1ZbSKfbw for Part 2 where I turn and texture the gondola, color and assemble the completed ornament. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

CHRISTMAS JACK! ·
By: Nick Zammeti NZ WoodTurning
October 05, 2016 · 1,225 views

A little man I turned for Christmas. his name is Christmas Jack. Its not Xmas yet but its not long.. Music By https://soundcloud.com/danijel-zambo https://danijel-zambo.bandcamp.com/ SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nzwoodturning/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

My Christmas Ornament For 2016 Christmas Ornament Challenge ·
By: As Wood Turns
September 30, 2016 · 3,716 views

http://www.AsWoodTurns.com This year's Christmas Ornament Challenge is rapidly approaching. The submission period is November. We're working on the official announcement. Meanwhile, I want to turn a simple ornament. While there are few rules for ornaments, one that occurs to me is that something that must hang from a tree must be lighter than solid wood. But I don't like hollowing thru a small hole. So for this ornament, I'm turning it cross grain, part it, hollow the two portions, then glue the piece back together again. The challenge for this ornament is how to mount it to the lathe. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

 

sandcarved ornament disk ·
By: Al Hockenbery
September 27, 2016 · 82 views

This is part of a demonstration given to Tri-County woodturners september 2015. it shows turning a disk ornament with double sided tape, cutting resist in the shape of a dragon fly, and sang carving a dragon fly. these disk make a nice canvas for wooden onaments, pendants, or inserts in box lids

 

Turn a Finial Ornament by Hal Simmons - Part 2 of 2 ·
By: Gwinnett Woodworkers
September 23, 2016 · 2,390 views

Hal Simmons, a noted local woodturner, finishes the top of the ornament, parts it off and demonstrates his wax finish techniques including Beall buffing in Part 2 of this two part series. Click here for Part 1 https://youtu.be/9dPY-NImwxM where Hal demonstrates woodturning an elegant, one piece finial ornament. He demonstrates the usefulness of a beading and parting tool with detailed closeups. Recorded and presented in HD 09-08-2016 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Turn a Finial Ornament by Hal Simmons - Part 1 of 2 ·
By: Gwinnett Woodworkers
September 23, 2016 · 3,017 views

Hal Simmons demonstrates woodturning an elegant, one piece finial ornament. He demonstrates the usefulness of a beading and parting tool with detailed closeups. Click here for Part 2 https://youtu.be/-3UWiopxZAw where Hal, finishes the top of the ornament, parts it off and demonstrates his wax finish techniques including Beall buffing. Recorded and presented in HD 09-08-2016 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Inside Out Turning Part II ·
By: Lee Burkholder
September 22, 2016 · 709 views

Cumberland Valley Wood Turners, inside out, inside out wood turning, wood, wood turning, in out turning, lathe, turning wood, christmas ornaments,

 

Inside Out Turning Part I ·
By: Lee Burkholder
September 22, 2016 · 905 views

Cumberland Valley Wood Turners, lathe, wood turning, in out turning, inside out wood turning, inside out turning, turning wood, wood, wood working

 

Turn a Simple Globe Ornament ·
By: Mike Peace Woodturning
September 16, 2016 · 5,701 views

I show you how to woodturn an attractive but simple and elegant ornament turned from a single piece of wood. I show how to turn, finish and more. These make quick and easy gifts for Christmas. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning a Medallion Ornament ·
By: Mike Peace Woodturning
August 19, 2016 · 3,897 views

I demonstrate woodturning a simple medallion Christmas ornament using a glue block and a jam chuck. It is basically like a tiny plate and serves as a canvas for any variety of decorating or embellishment. This is great collaboration with other family members who may like to paint or decorate. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning an Icicle Ornament - A video for new woodturners ·
By: Walter Wager
August 11, 2016 · 12,843 views

Video is a demonstration of turning a tree ornament described in an article by Nick Cook, a professional woodturner from Atlanta, GA. Appropriate for a person just learning to turn, the video focuses on using the spindle roughing gouge, the ABC procedure for tool use, use of a spindle gouge, and sanding. A related outline of steps can be found at http://media.wix.com/ugd/b4cb96_ddc065e896734ca8a222987c99636afd.docx?dn %22Beginner%20Project%20-%20Snowman%20ornament.docx%22

 

Snowman ·
By: Turntastic Wood Designs
July 13, 2016 · 150 views

A fun, very easy snowman Christmas ornament

 

Turning a Christmas tree on the lathe ·
By: Woodturning with Owen
July 08, 2016 · 1,842 views

In this video, I am showing you how to turn a simple Christmas tree with easy techniques and tools you will most likely have. Please enjoy the video, like, subscribe and share, and please check out my other videos. Music: http://freemusicarchive.org/ 'solo acoustic guitar' (edited) by Jason Shaw - https://creativecommons.org/licenses/by/3.0/us/legalcode

 

My First Attempt At Turning An Inside Out Christmas Ornaments ·
By: Peter Mitchell
January 31, 2016 · 315 views

Inside Out Christmas Ornaments Hi all this is a old video from October 2015 I wasn't going to upload it as my battery died on my camera. I mist a lot of the filming plus I sort of classed it as a faille it didn’t turn out very good. I had only bean turning for about 2 months I thought I would upload it as I haven’t been in my shop for a while as it has been too cold I have to be a bit careful because of my health. Thank you to all my subscribers for sticking with me I hope to get back in my workshop soon

 

4 - Crazy Busy! Snowman Follow Up ·
By: Peter Matthew 2
January 28, 2016 · 74 views

This is the follow up video for the woodturned snowman. Website: http://peterturnswood.weebly.com RJB Woodturner: https://www.youtube.com/user/RJBWoodTurner Jay Bates: https://www.youtube.com/user/Jayscustomcreations Note: This is my vlog channel. I only upload videos where I talk and open stickers. If you want woodworking, go to my other channel: https://www.youtube.com/channel/UCMCVIk6zuSQNsbhdcPhfiBA ------------------------------------------------------------------------------------------------------ If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080

 

Woodturning a Snowman ~ Creative Woodturning ·
By: Peter Matthew
January 22, 2016 · 5,973 views

I made this snowman last year for a Christmas party at my woodturning club. I put it in a gift trade and a lot of people were asking how I made it. I wasn't going to upload this video because Christmas was almost a month ago, but I decided to share this, so that some of you guys might get something out of this. Thanks for watching! ------------------------------------------- My new vlog channel: https://www.youtube.com/channel/UCiSTSMFgLuO02VCMbFBoTrA ------------------------------------------------------------------------------- If you would like a sticker, send me a stamped self address

 

The Elderberry Snowman, Willem's Woodnotes ·
By: Willem Kossen
January 04, 2016 · 191 views

Do you know the song 12 days of Christmas? well, today is the 11th day. Just in time to post a late Christmas video. I made this little Elderberry and Padauk snowman to sit under the Christmas tree. Nice quick project. When i started turning i was inspired by some French turners who used Bedans to turn wonderful items. When i found a couple of very cheap antique mortising chisels that kinda look like bedans, i taught myself to use them the French way. Been doing that for a few years now, i only use this technique in the roughing stage. You may find this method inappropriate or even unsafe,

 

Cross Drilled Christmas Ornaments, by Dan Douthart ·
By: Gwinnett Woodworkers
December 26, 2015 · 17,821 views

Dan Douthard shows his method of creating a hollow Christmas ornament with a hanging decoration in the middle. Dan begins by drilling holes in each face of a 1 ” cube. After turning it spherical and setting a finial, he hangs a decorative element in the cross drilled cavity and mounts an icicle. The result is an heirloom Christmas tree decoration. Recorded and presented in HD 12/19/2015 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Turning a Finial and Icicle for Your Christmas Ornament, by Dan Douthart ·
By: Gwinnett Woodworkers
December 26, 2015 · 5,477 views

Dan Douthart demonstrates the way he turns finials and icicles for his Christmas ornaments. In his process, he maintains contact with the icicle with a live center in the tail stock and turns to the flame point. The last steps involve backing off the pressure from the tail stock and cutting the flame point free. Recorded and presented in HD 12-19-2015 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Christmas Ornament Challenge Results ·
By: Carl Jacobson
December 24, 2015 · 5,612 views

Official Challenge Playlist https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Sponsors - Craft Supplies USA –www.woodturnerscatalog.com - Robust Woodturning Tools - www.turnrobust.com - Chefware Kits - www.chefwarekits.com - Pony Tools Inc. – www.ponytools.com - Easy Woodtools - www.easywoodtools.com - Lyle Jamieson - http://lylejamieson.com/ - Hunter Tools - http://huntertoolsystems.com/ - Konifer Watches- https://www.koniferwatch.com/en/ I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www

 

2015 Christmas Ornament Woodturning Challenge Results ·
By: As Wood Turns
December 24, 2015 · 3,518 views

http://www.AsWoodTurns.com Official Challenge Playlist at: https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Sponsors - Craft Supplies USA –www.woodturnerscatalog.com - Robust Woodturning Tools - www.turnrobust.com - Chefware Kits - www.chefwarekits.com - Pony Tools Inc. – www.ponytools.com - Easy Woodtools - www.easywoodtools.com - Lyle Jamieson - http://lylejamieson.com - Hunter Tools - http://huntertoolsystems.com - Konifer Watch - www.koniferwatch.com - Zack Fuller Challenge Victors 1 Justin FIASCHETTI https://youtu.be/tvOeMkSCAic 2 Jose Alberto Giordano https://w

 

Woodturning A Christmas Bell ·
By: Jerry Paul
December 24, 2015 · 1,810 views

I uploaded this earlier but something went wrong with the upload and I lost half the sound. This will likely be my last upload before the new year, so I wanted to do one more Christmas ornament. Once again, I've sped up the video a little, but with the Santa hat, the elf voice kind of works. HO HO HO! Merry Christmas! Cheers!

 

Christmas Ornament Challenge Follow up ·
By: Turning Round
December 21, 2015 · 188 views

Christmas Ornament Challenge Follow up, I this video I talk about my ornament and a few other submissions to the Christmas ornament Challenge. I found a few that I thought were amazing. The first one was from Yuval Lahav, This was amazing, very detailed, I was impressed. https://youtu.be/6_GbpGRTSG0?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Here is the Olaf Video, I like this one as well, it is from Tim Keeley https://youtu.be/9D5jg04mqP4?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd I hope you get a chance to watch them all and share with your friends.

 

Wood Turning #123 1234567 Texted A Christmas Ornament ·
By: The Tiny Trailer Workshop
December 15, 2015 · 592 views

There is a link to the texted version within Click on the links to see the ornament being made in pieces! This link takes you to the 4th Annual Christmas Ornament Challenge playlist... http://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd The wood ; 3:18 The Padauk Top ; 4:27 A Blue Onion ; 3.25 Yellow Heart Globe; 2:43 Umbrella ; 4:44 The Finial ; 4:45 The Bells ; 2:16 Forever! Hope you found it enjoyable. Thanks for watching Larry

 

Turning a snowman ·
By: Mats Turnings
December 15, 2015 · 261 views

Here I turn a snow man on the the lathe I aren't a professional I'm learning as I go

 

Wood Turning #123 1234567 A Christmas Ornament ·
By: The Tiny Trailer Workshop
December 14, 2015 · 842 views

There is a link to the texted version within! Click on the links to see the ornament being made in pieces! This link takes you to the 4th Annual Christmas Ornament Challenge playlist... http://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd The wood ; 3:18 The Padauk Top ; 4:27 A Blue Onion ; 3.25 Yellow Heart Globe; 2:43 Umbrella ; 4:44 The Finial ; 4:45 The Bells ; 2:16 Forever! Hope you found it enjoyable. Let me know if any parts don't work right! Thanks for watching Larry

 

Making Christmas Ornament ·
By: Tommy Akridge Designs
December 12, 2015 · 1,414 views

The making of an easy Christmas tree Ornament

 

Hand Turned Ornament Stand with Sam Angelo ·
By: WYOMINGWOODTURNER
December 11, 2015 · 3,600 views

Sam turns a wooden stand for a Christmas ornament. This adds a personal touch and allows the hanger to accept taller ornaments.

 

Christmas Drum Ornament For Little Drummer Boy ·
By: As Wood Turns
December 10, 2015 · 2,135 views

http://www.AsWoodTurns.com This video uses the third and last pieces of wood glued into a stave segmented block: The first was a traditional globe ornament; then a vase ornament; and now a drum ornament. I do not know the pen blank wood - this wood was part of a 'exotic tropical wood' pen blank Black Friday sale a couple of years ago. However, I did use Padauk in between each pen blank. The tropical wood is quite soft and tears out from end grain very easily. This ornament is finished with Mylands Friction Polish. To finish turning the exterior of my cylinder, I needed to customize a chuck

 

Christmas Ornament Vase Reminds Of Spirit Of Giving ·
By: As Wood Turns
December 03, 2015 · 2,709 views

http://www.AsWoodTurns.com This Christmas vase is turned from mixed 'tropical pen blanks'. I had glued up the pen blanks for an earlier project and had ample left over. Move than enough for this project. Since the wood was already glued up, this was a simple project. I hollowed it, then added a top and a bottom to the vase. It reminds me of the gifts given the the Christ Child. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Bach Guitar Calm under license via Adobe Premiere Elements Smart Sound.

 

The annual 4th Christmas Ornament Entry TTW ·
By: The Tiny Trailer Workshop
December 01, 2015 · 1,008 views

So again this is not the final video! There is so much more to tell than this can say! There are things like the lights turn off and on by turning the top piece! This would have been a great project for the WyomingWoodturner Sam Angelo... but I don't have any of that kind of gear anyway... so I took a hack saw and cut the top off a pop bottle. Gluing the top of the bottle to the top ball makes a place for wires and the battery. I soldered washers to the two wires and then the battery sits on one... and the insulation on the upper one keeps the top washer from making contact until you turn the lid all the way closed! But that will be all looked into in the next videos! Thanks to Carl and Alan for putting on the challenge and for doing all the hard work! Thanks too for watching Larry

 

Icicle Snowman Ornament Woodturning on Lathe ·
By: Wood Frontier
December 01, 2015 · 1,321 views

This is an icicle Snowman for the 2015 ornament challenge. The Icicle Snowman was popularized by production turner Nick Cook. He did one at a demonstration in April and it looked like a lot of fun. I added a middle section to the snowmen for more of a traditional look. This is a nice project as you get practice with the skew chisel and rolling beads. Plus you get to burn in the hat rim and burning on the lathe is always fun. http://woodfrontier.com/woodturning-a-christmas-ornament

 

Wrapping Up The Ornament Challenge ·
By: Carl Jacobson
November 30, 2015 · 7,301 views

Last day to get your entry in for the Christmas Ornament Challenge. Challenge ends 11/30/15 Sponsors - Craft Supplies USA- www.woodturnerscatalog.com - Robust Tools- www.turnrobust.com - ChefwareKits- www.chefwarekits.com - Pony Tools Inc- www.ponytools.com - Easy Wood Tools- www.easywoodtools.com - Hunter Tools- www.huntertoolsystems.com - Konifer Watches- www.koniferwatch.com - Lyle Jamieson- www.lylejamieson.com - Zac Higgins- www.nvwoodwerks.com - https://www.youtube.com/user/NVWoodwerks Paul Jackman https://www.youtube.com/user/JackmanCarpentry I upload a new project video every Frid

 

Christmas Ornament Challenge 2015 ·
By: Chris Pine
November 30, 2015 · 2,413 views

This years Christmas Ornament Challenge. I for sure have no expectations of winning anything. This entry is so simple and I am sure way below anyone else entries. I wanted to support this challenge however and also its been a while since I made a video. I miss doing them. I have had some things in life that have occupied my time and has taken away from etc shop and making videos. Merry Christmas and Happy new year everyone! I hope this time of year finds you blessed and happy! My Info: Website: TheChrisPineWorkshop.com YouTube Channel https://www.youtube.com/user/TheChrisPineWorkshop Time

 

2015 Christmas Ornament Challenge Old Kerosene Lamp ·
By: Daniel Vilarino
November 30, 2015 · 7,996 views

Hola/Hi! ***This video is in English*** Este video está en Inglés, si quieres ver la versión en Español, por favor haz un click en el siguiente enlace: https://youtu.be/LMmcmqWxrHs ***This is my entry for the 4th Christmas Ornament Woodturning Challenge, sponsored by Alan Stratton and Carl Jacobson.*** Este es mi video para el 4to Desafío del Adorno Navideño Torneado, auspiciado por Alan Stratton y Carl Jacobson. El siguiente es el enlace para la lista de videos de 4to Desafío del Adorno Navideño Torneado: ***The following is the link to the 4th Christmas Ornament Woodturning Challenge Pla

 

Woodturners Journal: Create a Christmas Ornament on a Lathe ·
By: Woodturners Journal
November 30, 2015 · 512 views

Jerrod turns a Christmas ornament out of wood on a lathe. It's made from black walnut with a decorative silver stem and top.

 

Emily Wood Ornament Challenge ·
By: Erick Wood
November 30, 2015 · 262 views

Christmas Ornament Challenge Follow us on Facebook @ WoodShed Designs https://www.facebook.com/WoodShed-Designs-142003032560268/?ref aymt_homepage_panel Official playlist https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd

 

2015 Ornament Challenge ·
By: Erick Wood
November 30, 2015 · 14 views

This video is about 2015 Ornament Challenge

 

Woodturning a Classic Christmas Ornament 2015 Ornament Challenge ·
By: Peter Matthew
November 29, 2015 · 1,327 views

This week I made my second entry to Carl Jacobson and Alan Stratton's Ornament Challenge. It's the classic woodturned ornament. I used a piece of Walnut for the globe and two pieces of African Blackwood for the finials. Thanks for watching! ---------------------------------------------------------------------------- Carl Jacobson: https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Alan Stratton: https://www.youtube.com/channel/UCucYlCYbbf1ZDGO-7OjKl5w Ornament Challenge: https://www.youtube.com/watch?v F0ssrYgQriE Finial Chucky: http://www.rubberchucky.com/store/p6/Finial_Chucky.html ---------------------------------------------------------- If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

4 Turning a goblet ornament ·
By: Eric Percival
November 29, 2015 · 278 views

This video is about Turning a goblet ornament for the 2015 ornament turning challenge. The wood is cedar which is quite soft and delicate to turn but is quite beautiful on the christmas tree!

 

Christmas Ornament Challenge 2015 ·
By: Peter Woodbine
November 29, 2015 · 423 views

'Silver Planet' My entry for Alan & Carl's 2015 Christmas Ornament Challenge

 

Gyro Ornament ·
By: Derek Oliver
November 29, 2015 · 56,186 views

A gyroscopic ornament made from pine and cedar. I made this for the 2015 Christmas Ornament Challenge (link below) https://www.youtube.com/watch?v KnPEz-X-T34&list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd

 

Hollow Snowman Ornament ·
By: Mike Peace Woodturning
November 28, 2015 · 2,888 views

I demonstrate woodturning a Frosty the Snowman Christmas ornament with a hollowed center filled with cotton. I show how to decorate with puff paint after turning and add the cotton for his belly. This idea comes from one of my viewers, James Robb, from Scotland, who has had it for several years but can’t remember exactly where he got the original idea. It is my entry into the 2015 Christmas Ornament Challenge by Alan Stratton and Carl Jacobson. See the challenge at https://youtu.be/KnPEz-X-T34 This year's Challenge Playlist for all ornament video submissions is at https://www.youtube.com/playlist?list... Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

Wood turning Christmas ornament challenge 2015 ·
By: Woodslee Summercraft
November 28, 2015 · 14,264 views

This is my entry into the christmas ornament challenge 2015 by Carl Jacobson and Allen Stratton, it was a work in progress with design changes as I made it, but it is a light in memory of those that life in Paris.

 

Cracker - Christmas Ornament Challenge 2015 ·
By: Jake Webb
November 28, 2015 · 792 views

A Wooden Christmas Cracker which can be a gift box or a reuseable cracker. This project is a little longer than usual as I tried to cover the whole process in detail. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Woodturning Nutcracker 2015 Christmas ornament challenge ·
By: iturn
November 28, 2015 · 720 views

2015 Christmas ornament challenge hosted by Carl Jacobson & Alan Stratton

 

My 2015 Ornament Challenge Entry ·
By: MARK Baid
November 28, 2015 · 363 views

Sorry but this was suppose to have down loaded two days ago. Anyway Happy belated Thanksgiving.

 

Gnome Christmas Carolers ·
By: Carl Jacobson
November 27, 2015 · 24,876 views

I turned these gnomes out of Maple, Poplar, Cedar, Walnut and Plywood. This was a fun easy project, and a great Christmas gift as well. If you try this project be sure to let me know! I would love to see some pictures. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one onl

 

Christmas Bell for the Challenge 2015 ·
By: Mauro il tornitore
November 27, 2015 · 1,055 views

A Christmas bell between natural fruits. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Una campana natalizia tra frutti naturali. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Woodturning Cherry Christmas My entry for the 2015 Christmas ornament challenge. ·
By: Templeboy Turnings
November 27, 2015 · 14,375 views

This is my entry to Alan Stratton (as wood turns) and Carl Jacobson's Christmas Ornament Challenge. Turning Cherry Christmas the T-light snowman from a log of Cherry. Pyro face, hat and scarf, and some wooden skew arms and nose !! Hope you enjoy my video entry, Merry Christmas to you and yours, Steve. Music Dance of the Sugar Plum Fairy by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100270 Artist: http://incompetech.com/ Title and credit music http://www.bensound.com/royalty-free-music or 'Music: Song title - Bensound.com' Christmas Ornament Challenge 2015 (Alan Stratton/As Wood Turns) https://youtu.be/KnPEz-X-T34 Christmas Ornament Challenge 2015 (Carl Jacobson)https://youtu.be/F0ssrYgQriE Thank you for watching, If you like what you have seen, please like and share my videos, and if you haven't already please subscribe.

 

How to Make a Festive Christmas Ornament ·
By: The Russian Woodworker
November 27, 2015 · 365 views

In this video I turn a piece of greenwood and purple heart and turn it into a traditional and futuristic looking Christmas ornament. This is yet another video for the Christmas Ornament Turning Challenge. The music is Force by Allan Walker from NCS: http://nocopyrightsounds.co.uk/video/alan-walker-force-ncs-release/ Enjoy. Eyelet Video: https://www.youtube.com/watch?v gD4uTC76Y8Q Christmas Ornament Challenge: https://www.youtube.com/watch?v F0ssrYgQriE

 

Making Eyelets for Christmas Ornaments ·
By: RickTurns
November 25, 2015 · 1,686 views

An easy and quick way to make eyelets for all those Christmas ornaments you're turning!

 

Photo Ornament II ·
By: micpen22
November 25, 2015 · 265 views

This is the what started me adding lights to my Christmas Ornaments. hope you enjoy the video and please join my page as I will be adding videos throughout the year.

 

My Fun Christmas Ornament Challenge 2015 Christmas Tree ·
By: Turning Round
November 25, 2015 · 984 views

This is my Christmas Ornament for the 2015 Christmas Ornament challenge. I made a Christmas tree from some walnut and Alumilite casting. It was a great project and was fun to do. Here is a link to my Ornament from 2014. https://youtu.be/-5s9ECJWb1s Here is a link to the 2015 Ornament Challenge. https://www.youtube.com/watch?v F0ssrYgQriE Here is the link for all Ornaments http://www.aswoodturns.com/challenges...

 

Birdhouse Ornament Christmas Ornament Challenge 2015 ·
By: Peter Matthew
November 25, 2015 · 2,473 views

Hi guys! This week I turned another birdhouse ornament for the Christmas ornament challenge. ---------------------------------------------------------- Carl Jacobson: https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Alan Stratton: https://www.youtube.com/channel/UCucYlCYbbf1ZDGO-7OjKl5w Ornament Challenge: https://www.youtube.com/watch?v F0ssrYgQriE Finial Chucky: http://www.rubberchucky.com/store/p6/Finial_Chucky.html Cardinal Birds: http://www.rubberchucky.com/store/p59/Ornament_Birds.html ---------------------------------------------------------- If you would like a sticker, sen

 

2015 Christmas ornament challenge ·
By: micpen22
November 24, 2015 · 424 views

This is a one-of-a-kind design of a Christmas ornament that I came up with as I was looking at the many different types of sea urgent ornaments out there. I really wanted to make something that no one else has made so this was my idea I hope you like it.

 

Le PicBois #23 - Xmas Lantern ·
By: Le PicBois
November 24, 2015 · 2,557 views

[ This is my entry for the 2015 Christmas Ornament Woodturning Challenge. I made a lantern out of cherry & wenge wood ] Official playlist of the challenge: https://www.youtube.com/watch?v KnPEz-X-T34&list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois Special Thanks: Easy Wood Tools: https://www.youtube.com/user/EasyWoodTools Carl

 

#53 2015 Christmas Ornament Challenge ·
By: Uncle Cys Woodshop
November 24, 2015 · 1,502 views

Here is my entry into the 2015 Christmas ornament Challenge. A Light-up Acorn made with Box elder and Plum. My favorite thing about this time of year is the lights. I don't actually decorate but enjoy seeing what others do. So I decided to do an ornament that lights up.

 

Woodturning: Christmas Ornament II ·
By: Roundabout Woodworks
November 22, 2015 · 9,686 views

This is a different style of ornament and much easier to hollow if you have a small hollowing tool, or if you don't, one could be made from a hex key (Allen wrench). I suppose you could do without hollowing at all but I prefer to make the ornament as light as possible.

 

Grinch Christmas Ornament ·
By: Carl Jacobson
November 20, 2015 · 8,597 views

We saw a recycled light bulb painted like this, and thought I would give it a go. My eBay listing http://www.ebay.com/itm/-/221945931152? I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?tracking carl Website http://www.thewoodshop.tv/ Google https://plus.google.com/11319990456589302

 

Woodturning at 54a. #45 A Christmas pencil ornament ·
By: Keith Barrow
November 20, 2015 · 3,409 views

My take on a Christmas hanging ornament made from just about the last of my pencils! Please support UKIWS www.UKIWS.co.uk

 

Woodturning a Segmented Christmas Ornament #2 ·
By: Fiaschetti Woodworking
November 19, 2015 · 8,311 views

Please visit my new website http://www.fiaschettiwoodworking.com/ In this video I make a segmented Christmas ornament out of walnut, sapele, maple, and padauk. It consists of 507 pieces. The finish is 3 coats of 50/50 boiled linseed oil and poly, and 5 coats of poly and 1 with poly and mineral spirits. Thank you for watching Any questions please email me at fiaschettiwoodworking@gmail.com

 

rustic ·
By: Steve Krumanaker
November 19, 2015 · 1,032 views

Very rustic birdhouse Christmas ornament. Fun and fast, easy project

 

Ornament exp. #2 Success! ·
By: Rich McNatt
November 19, 2015 · 382 views

 

Woodturning: Cedar Ornament (Part One) ·
By: Roundabout Woodworks
November 18, 2015 · 1,566 views

This is part one of the sequence. The ball of the ornament is turned and hollowed. I use a skew chisel and I did not edit out the catches! I would've liked to upload a single video, but it was too big. The wood used is red cedar.( After uploading I realized I don't show the completed ornament, so you'll have to look on my facebook page, or find the google post, if you want to see the finished ornament. Sorry.)

 

Woodturning: Cedar Ornament (Part Two) ·
By: Roundabout Woodworks
November 18, 2015 · 1,325 views

This is part two of the sequence. Both the top and bottom finials are turned. I use a skew chisel mostly, but a spindle gouge is used for the top finial. I would've liked to upload a single video, but it was too big. The wood used is red cedar.( After uploading I realized I don't show the completed ornament, so you'll have to look on my facebook page, or find the google post, if you want to see the finished ornament. Sorry.)

 

Turning a Hollow Ornament with Tim Voellinger ·
By: Show Me Woodturners
November 17, 2015 · 99 views

Turning a Hollow Ornament with Tim Voellinger

 

Wood Turning a Victorian Ornament ·
By: SP Wood Art
November 16, 2015 · 5,042 views

I am surprised at how many holiday traditions my family engages in each year that derives from the Victorian era. So, to celebrate these wonderful times of the year I wood turned a Victorian ornament from a scrap piece of ash wood. I will also be submitting this video to Carl Jacobson and Alan Stratton's annual Wood Turning Ornament challenge. Refer to the below link if your interested in submitting a video: http://www.aswoodturns.com/challenges/christmas-ornament-2015/ If you would like see more of SP Wood Art visit us at: www.spwoodart.com www.facebook.com/spwoodart www.plus.google.com/

 

bh7 ·
By: Steve Krumanaker
November 15, 2015 · 78 views

Drilling the mounting hole for a turned bird on the perch for a birdhouse ornament.

 

bh14 ·
By: Steve Krumanaker
November 15, 2015 · 111 views

The finished ornament.

 

bh13 ·
By: Steve Krumanaker
November 15, 2015 · 129 views

birdhouse ornament

 

bh12 ·
By: Steve Krumanaker
November 15, 2015 · 156 views

Assembling a wood turned bird for a Christmas ornament.

 

bh11 ·
By: Steve Krumanaker
November 15, 2015 · 119 views

wood turning the head for a tiny bird

 

bh10 ·
By: Steve Krumanaker
November 15, 2015 · 118 views

Turning and drilling the body for a wood turned bird for a Christmas ornament

 

bh8 ·
By: Steve Krumanaker
November 15, 2015 · 94 views

fitting the perch

 

bh6 ·
By: Steve Krumanaker
November 15, 2015 · 88 views

Making and fitting the perch for a birdhouse Christmas ornament.

 

bh5 ·
By: Steve Krumanaker
November 15, 2015 · 124 views

Making the bottom finial for a classic birdhouse ornament.

 

bh4 ·
By: Steve Krumanaker
November 15, 2015 · 99 views

Finished lid and body for a traditional birdhouse ornament.

 

bh3 ·
By: Steve Krumanaker
November 15, 2015 · 100 views

Using a jamb chuck to finish turn and sand the roof for a traditional birdhouse ornament.

 

bh2 ·
By: Steve Krumanaker
November 15, 2015 · 181 views

Unedited Video of turning a roof for a traditional Birdhouse Christmas ornament.

 

bh1 ·
By: Steve Krumanaker
November 15, 2015 · 272 views

Unedited video of making a body for a classic birdhouse ornament. There are some good shortcuts displayed in this video.

 

2015 Misfit Ornament ·
By: Erick Wood
November 15, 2015 · 451 views

Lantern Ornament made from Mahogany, Walnut, and Maple. Follow us on Facebook @ WoodShed Designs https://www.facebook.com/WoodShed-Designs-142003032560268/?ref aymt_homepage_panel Official playlist https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd

 

Wood Inlay Ornament - Christmas Ornament Woodturning Challenge / 2. Entry ·
By: Fabian's Tiny Workshop
November 15, 2015 · 12,654 views

Scroll Saw meets Wood Lathe! This is my second entry for the 2015 Christmas Ornament Woodturning Challenge hosted by Alan Stratton and Carl Jacobson For more information on this challenge visit https://youtu.be/F0ssrYgQriE https://youtu.be/KnPEz-X-T34 Enter Your Ornament at www.AsWoodTurns.com/Challenges Official Challenge Playlist at: https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Alan Stratton http://www.AsWoodTurns.com Carl Jacobson http://www.thewoodshop.tv Support me on Patreon: https://www.patreon.com/FabiansTinyWorkshop

 

Woodturning christmas challenge 2015 by Marc ·
By: Marc 's Oneway of turning
November 14, 2015 · 871 views

My small project for the challenge. By the way, my wife will bring the project to work.

 

Ornament Callange entry #2 Contest edit ·
By: Rich McNatt
November 14, 2015 · 584 views

 

Barry's First Ornament - 2015 Christmas Ornament Woodturning Challenge ·
By: Barry's Workshop
November 13, 2015 · 2,172 views

This is my first attempt at woodturning a Christmas Ornament. The woods for the globe are maple and redheart. The finial is ebonized fir. For more info about the challenge, visit here: https://www.youtube.com/watch?v KnPEz-X-T34 http://www.aswoodturns.com/challenges/ Big thanks to Alan Stratton and Carl Jacobson for sponsoring this challenge. I've only been turning a few months, and this prompted me to do several new things (like reverse turning). It has been a good experience and I'm happy to be able to contribute. The holiday music in this video is from audionautix.com. Released under Creative Commons License 3.0.

 

Salvaging My Christmas Bell Ornament ·
By: As Wood Turns
November 12, 2015 · 4,036 views

http://www.AsWoodTurns.com This Christmas bell is turned from maple about 2 inches in diameter and three inches tall. It is finished with colored artists pens and lacquer. It started life as a hollowed bulb ornament. However, one end got too thin. My salvage efforts resulted in a bell. While I'm happy with the bell, I'm always disappointed when I turn a wall too thin. See our Christmas Ornament Woodturning Challenge at https://youtu.be/KnPEz-X-T34 This year's Challenge Playlist for all ornament video submissions is at https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd

 

Classic Birdhouse Christmas Ornament.......No Vacancies ·
By: Steve Krumanaker
November 12, 2015 · 18,461 views

Heavily Edited video of how I make a Birdhouse Christmas Ornament. Many thanks to Carl and Allen and to the many other youtube authors I've learned and gotten ideas from. To see the uncut version of making this birdhouse ornament click on this link https://www.youtube.com/playlist?list PLaJ6DtPO-6L91WKID71kLk6Hb6aTWU6ZD Merry Christmas to all and thanks for watching! Steve

 

Ornament experiment ·
By: Rich McNatt
November 12, 2015 · 376 views

 

Christmas ornament for the Challenge ·
By: Mauro il tornitore
November 11, 2015 · 23,464 views

This is my second contribution to the 2015 Christmas Ornament Woodturning Challenge issued by Alan and Carl. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. A great thank to Alan and Carl for the opportunity. Mauro Questo è il mio secondo video per il Concorso Ornamenti Natalizi fatti al tornio 2015. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Un grande ringraziamento ad Alan e Carl per l'opportunità fornita. Mauro

 

2015 Christmas Ornament Challenge #1 Pine Branch Christmas Tree ·
By: H F Bowern Designs - Harold Bowern
November 11, 2015 · 1,486 views

Welcome back to the channel. Well here is my first entry for this years 'Christmas Ornament Challenge' put on by Carl Jacobson and Allan Stratton. It is a Christmas tree made from a pine tree branch. Finished with acrylic paints to give it the festive colours and decorated with the small ball shaped pieces form a Christmas decoration I picked up at my local craft store. I hope you like my little tree. Thank you Carl and Allan for setting up the challenge. Thanks again for watching. If you like this video, please click the 'Like' button. If haven't already don't forget to click the 'Su

 

How to Turn Ebony Scrap into A Christmas Ornament ·
By: The Russian Woodworker
November 11, 2015 · 519 views

In this video I show how I turned a piece of ebony into a beautiful Christmas ornament. I also show a piece of walnut, which I carved a snowman into. Both of which I will enter into the Christmas Ornament challenge. Enjoy. Enter Your Ornament at www.AsWoodTurns.com/Challenges The song I used is Fade by Alan Walker from NCS: http://nocopyrightsounds.co.uk/video/alan-walker-fade/ Official Challenge Playlist https://www.youtube.com/playlist?list...

 

Flash-Light-House -- Christmas Ornament Challenge 2015 ·
By: PeteTGIF
November 11, 2015 · 2,870 views

Flashlight Cover, Lighthouse shaped! ------------------------------------------------ The lighthouse like Jesus guides you in times of darkness. That's the reason why I chose it as my entry for this year's Christmas Ornament Challenge by Alan Stratton and Carl Jacobson. ------------------------------------------------ Thanks to Alan and Carl for challenging us to show our ideas of a Christmas Ornament. Like in the past years it was great fun to turn something and sharing it with the world. ----------------------------------------------- This is the shortened version for to be judged. The full

 

Flash-Light-House ·
By: PeteTGIF
November 11, 2015 · 2,049 views

Flashlight Cover, Lighthouse shaped! This Flashlight Cover will be my entry for this year's Christmas Ornament Challenge by Alan Stratton and Carl Jacobson. As this Version might be a little long, due to my detailed explanations, there'll be a short Version for the Judges and the ones without patience released later today. I used some carving to get the texture of a brick lighthouse to the base. On top of that, this was the first time I tried my new camera, what do you think of the pictures and the sound? I think it had been worth investing. ------------------------------------------------ You

 

2015 Christmas Ornament Challenge Sam Angelo ·
By: WYOMINGWOODTURNER
November 10, 2015 · 3,594 views

This is my entry for the 2015 Christmas ornament challenge. Thanks Alan and Carl for your efforts on this project. Sam

 

woodturning christmas ornament challange 2015 ·
By: Gary Harris
November 10, 2015 · 1,716 views

This is a oak snowman for the christmas ornament challage 2015 hope you enjoy

 

Wood Turning - A Snowman ·
By: Mike Waldt
November 09, 2015 · 12,500 views

My entry for the 2015 Christmas Ornament Challenge, hosted by Carl Jacobson and Alan Stratton, thanks again guys for hosting this great annual event. Christmas Ornament Challenge Playlist: https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Carl's Channel: https://www.youtube.com/user/haydenHD Alan's Channel: https://www.youtube.com/user/AsWoodTurns Stephen Ogle's Channel: https://www.youtube.com/user/stvnogle Martin Saban-Smith: https://www.youtube.com/user/workingimage Steve Twydell: https://www.youtube.com/user/stevo15771 UKIWS Webite: https://www.ukiws.co.uk UKIWS Facebook page: https://www.facebook.com/ukiws/ Guitar by Michael Berk: https://www.youtube.com/watch?v F_n3xV4W-sw

 

Wood Turned Christmas Tree Ornament #21 ·
By: Tommy Akridge Designs
November 09, 2015 · 5,111 views

Ornament Challenge 2015

 

Christmas ornament contest 2015 UFO ornament ·
By: Living Wood Creations -wood turning videos-
November 08, 2015 · 542 views

My entry for the Christmas ornament contest of 2015 this is my UFO ornament If you would like to contact me my email is livingcreationsturning@gmail.com Thanks LWC

 

#38 2015 Christmas Ornament (short version) ·
By: Yuval Lahav Woodturning
November 07, 2015 · 5,398 views

This is my submission to the 2015 Ornament Challenge, again this year, issued by Carl Jacobson and Alan Stratton. This is the short version, if you want to check out the much longer version, you can find it here: https://youtu.be/dl03bVxO9DM Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Katy Kirby - Come Back to Nashville Josh Woodward - Thanks For Coming All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

#37 2015 Christmas Ornament (full version) ·
By: Yuval Lahav Woodturning
November 07, 2015 · 17,941 views

This is my submission to the 2015 Ornament Challenge, again this year, issued by Carl Jacobson and Alan Stratton. This is the long version, if you want to check out the much shorter version, you can find it here: https://youtu.be/6_GbpGRTSG0 Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Katy Kirby - Come Back to Nashville Josh Woodward - Thanks For Coming The Mind Orchestra - The Minoan MC Cullah - A Place I Know Katy Kirby - Every Time All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Making a Holiday Tree (Short Build Video from Monday's Discussion) ·
By: wortheffort
November 06, 2015 · 2,032 views

I was asked to just cut out the build part of Monday's Lunch Discussion. So here it is. Turning one of our staple products during the holiday season. Sometimes in hyper mode.

 

Woodturning Stave Segmented Pen Blank Christmas Ornament ·
By: As Wood Turns
November 05, 2015 · 10,087 views

http://www.AsWoodTurns.com This is another ornament for this year's Christmas Ornament Woodturning Challenge The ornament's body consists of eight 'exotic tropical hardwood' pen blanks cut in stave fashion with strips of padauk between each. Each pen blank was ripped at a 22.5 degree angle. The ornament's top and bottom are walnut. The ornament is finished with Myland's Friction Polish. See our challenge at https://youtu.be/KnPEz-X-T34 This year's Challenge Playlist for all ornament video submissions is at https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Prizes will

 

Christmas Ornament Challenge ·
By: David K
November 05, 2015 · 1,810 views

My entry for the Christmas Ornament Challenge 2015 by Carl Jacobson and Allan Straton. I want to thank both of them for the time they are spending to provide us with this fun little project! Here is the link for all Ornaments http://www.aswoodturns.com/challenges/christmas-ornament-2015/ This is my first video and i plan on doing more in the future!! Please leave a comment and if you want to see more, a subscription would be greatly appreciated https://www.facebook.com/davidkoessler ____________ Almost in F - Tranquillity von Kevin MacLeod ist unter der Lizenz Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) lizenziert. Quelle: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100394 Interpret: http://incompetech.com

 

Making a Tree (the meta way) - A Monday Lunch Discussion 11-2-15 ·
By: wortheffort
November 05, 2015 · 1,777 views

In this weeks 'lunch discussion' we talk about our holiday staple product, some prototype boxes, averaging out weekly art market sales, deciding what's a good fit in the art markets you patronize and we replaced our normal tool technique tip with a build video. We also explain the cool upcoming build we're working on.

 

Wood Turning Another Really Fast Inside Out Ornament ·
By: Jerry Paul
November 01, 2015 · 19,117 views

Here's another high speed / no narration inside out ornament I've just taken off the lathe. If you don't want to hear the background music, just turn the sound down... you won't be missing anything else. lol OH! - And this ornament gets something new... (to me, anyway) You won't believe your eyes!!! hahaha ... Yes you will,... I've just noticed that that phrase is a pretty effective hook on some social media sites that shall remain nameless. hahahahaha Hope you enjoy the video. It was a fun ornament to turn, although the glue up was a bit tedious. lol Cheers!

 

Turning the bottom of a rough log section. ·
By: Turning Round
October 29, 2015 · 478 views

This is a short video of wood turning I turn a log section to flatten the bottom. The log was very warped and cracked and need a bit of attention. This is for a Christmas decoration for a friend. The chunk of wood was then used as a table decorations

 

Woodturning Hollow Christmas Ornament With Wood Burning ·
By: As Wood Turns
October 29, 2015 · 6,483 views

http://www.AsWoodTurns.com This ornament is my first for this year's Christmas Ornament Woodturning Challenge. It is cherry with the bulb about 2 inches in diameter plus about 1 inch integral finial. I hollowed the bulb by cutting it in half, hollowing the two halves, and gluing it back together. It is finished with shellac friction polish. For decoration, I turned several v-grooves and woodburned (pyrography) some random designs. I then sanded the burned areas before finishing and buffing the ornament. Enter your ornament video at http://www.AsWoodTurns.com/Challenges. There's still lots of time before the deadline of November 30, 2015. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Bach Guitar Calm under license via Adobe Premiere Elements Smart Sound.

 

Christmas Ornament Woodturning Challenge ·
By: Fabian's Tiny Workshop
October 28, 2015 · 5,034 views

This is my entry for the 2015 Christmas Ornament Woodturning For more information on this challenge visit https://youtu.be/F0ssrYgQriE https://youtu.be/KnPEz-X-T34 Enter Your Ornament at www.AsWoodTurns.com/Challenges Official Challenge Playlist at: https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Alan Stratton http://www.AsWoodTurns.com Carl Jacobson http://www.thewoodshop.tv Support me on Patreon: https://www.patreon.com/FabiansTinyWorkshop

 

Turning A Birdhouse Ornament with Jim Akins. ·
By: Show Me Woodturners
October 27, 2015 · 362 views

Turning A Birdhouse Ornament with Jim Akins.

 

Christmas Ornament Challenge Update ·
By: Carl Jacobson
October 26, 2015 · 4,981 views

Tambourine follow-up, and two new sponsors for the Christmas Ornament Challenge. Enter Your Ornament at www.AsWoodTurns.com/Challenges Official Challenge Playlist https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Sponsors - Craft Supplies USA –www.woodturnerscatalog.com - Robust Woodturning Tools - www.turnrobust.com - Chefware Kits - www.chefwarekits.com - Pony Tools Inc. – www.ponytools.com - Easy Woodtools - www.easywoodtools.com -Lyle Jamieson - http://lylejamieson.com/ -Hunter Tools - http://huntertoolsystems.com/ I upload a new project video every Friday. Tha

 

A Steampunk Dirigible Christmas Tree Ornament ·
By: RickTurns
October 25, 2015 · 3,273 views

It's not too late to turn Christmas tree ornaments! Join me during this festive holiday season in the traditional pastime of turning a steampunk Christmas tree ornament. Nothing says 'Christmas' like a fantastical object being hauled through the sky by unbelievable power sources. Music by audionautix.com

 

Birdhouse Ornament 2015, Woodturning by Sam Angelo ·
By: WYOMINGWOODTURNER
October 24, 2015 · 9,413 views

Sam turns a birdhouse ornament for the local Festival of Trees fundraiser. He details the roof with a little wood burning....

 

#19 Wood Turning a Christmas nutcracker ornament ·
By: Tommy Akridge Designs
October 22, 2015 · 15,445 views

Getting ready for Christmas with a nutcracker

 

Woodturning with Tim Yoder-Laser Kit Christmas Ornament ·
By: woodturningwithtim1
October 22, 2015 · 2,600 views

Just in time for the Holidays, a Christmas ornament that is the perfect gift or to hang on your tree for years to come. Use your skills from the Finial Box project to turn a beautiful finial for your ornament! Watch it now at www.popularwoodturning.com

 

Wood Turning a Crab Apple Tree Ornament ·
By: Jerry Paul
October 22, 2015 · 6,520 views

Another ornament to add to my growing collection. I'm having a lot of fun turning these. This time I'm turning a tree. ... I didn't do this one in high speed this time.

 

#148 Little angels ·
By: Miguel Sanchez
October 20, 2015 · 2,790 views

More ornaments for this christmas, in this case some little angels, I hope you like it. Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

2015 Christmas Ornament Challenge ·
By: Carl Jacobson
October 19, 2015 · 7,523 views

Mark Baid https://www.youtube.com/channel/UCgYbI3IxsEGoFf6mBz7aJEQ 2014 Christmas Ornament Challenge https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Enter Your Ornament at www.AsWoodTurns.com/Challenges Official Challenge Playlist https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Sponsors - Craft Supplies USA –www.woodturnerscatalog.com - Robust Woodturning Tools - www.turnrobust.com - Chefware Kits - www.chefwarekits.com - Pony Tools Inc. – www.ponytools.com - Easy Woodtools - www.easywoodtools.com I upload a new project video every Friday

 

Woodturning A Quick Inside Out Ornament Really Quickly ·
By: Jerry Paul
October 19, 2015 · 209,842 views

In an effort to streamline ornament production, I've been making a few single-block ornaments. This time I thought I'd try to do a quick inside out ornament from a small piece of Mountain Ash. My previous video seemed to do well in that format, so I've done it like that again. - High speed, no narration. I've done some inside out pieces before, but just to see if I could. This is my first inside out ornament other than that.

 

The Turning Shed: Halloween Special!! ·
By: The Walnut Log Studio
October 19, 2015 · 654 views

We have a spooktacular project this week, it's almost Halloween and time to make some decorations...A Halloween Tree!! My inspiration came from a bottle stopper tutorial I found that was put out by Craft Supplies a few years ago. Using those stoppers as a template, I scaled the ghosts and hats down to turn them into ornaments. You'll see every step in this project including how to make your own cobwebs. I've also issued a turners challenge to see how many other turners I can get to make something Halloween themed. Please email me your pieces and I'll include them in my next video. ema

 

Ornament challenge 2015 Deer ·
By: Rich McNatt
October 16, 2015 · 1,362 views

This my entry to the 2015 Ornament challenge

 

2015 Christmas Ornament Woodturning Challenge ·
By: As Wood Turns
October 14, 2015 · 5,178 views

http://www.AsWoodTurns.com Enter Your Ornament at www.AsWoodTurns.com/Challenges Official Challenge Playlist at: https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Sponsors - Craft Supplies USA –www.woodturnerscatalog.com - Robust Woodturning Tools - www.turnrobust.com - Chefware Kits - www.chefwarekits.com - Pony Tools Inc. – www.ponytools.com - Easy Woodtools - www.easywoodtools.com -Lyle Jamieson - http://lylejamieson.com -Hunter Tools - http://huntertoolsystems.com -Konifer Watch - www.koniferwatch.com 4th Annual Christmas Ornament Woodturning Challenge Rules and

 

WGNC Demo: Dean Hutchins angel ornament Nov. 13, 2014 ·
By: weekendturner.com
October 14, 2015 · 1,234 views

WGNC welcomes North Carolina artist Dean Hutchins at the Nov. 13, 2014 meeting of the Woodturners Guild of North Carolina.

 

Wood Turning a Very Quick Ornament ·
By: Jerry Paul
October 12, 2015 · 5,586 views

I've been busy with some outside work lately and haven't had a chance to get a video out for a while. I was coming down with a head cold while I made this, so there is no narration.. just turning... in high speed. (I just HAD to turn SOMETHING! - and I just wanted to get it done.) The wood I used was Mountain Ash.

 

A Candlestick Christmas Tree Ornament ·
By: RickTurns
October 10, 2015 · 3,711 views

Turn an old-fashioned candlestick Christmas tree ornament, out of a few scraps of wood and wire.

 

One Piece, Wood turned Christmas Ornament Sam Angelo ·
By: WYOMINGWOODTURNER
October 09, 2015 · 9,598 views

Sam turns a simple hand made Christmas ornament. This ornament is turned from a single piece of Ziricoti. The globe is covered in Gold (metal) leaf giving the illusion of an ornament with 3 separate segments.

 

Very Special Christmas Ornament Kits ·
By: Ron Brown
October 07, 2015 · 1,097 views

Laser Cut Christmas Ornament Kits offered as a special seasonal discount. Make very unusual Christmas Ornaments, Hollow Forms, Bottle Stoppers, etc. with these innovative kits for wood turners made with a CO2 laser.

 

A Rocket Ship Christmas Ornament ·
By: RickTurns
October 02, 2015 · 2,566 views

With only a couple of scraps of wood, turn a rocket ship Christmas ornament! It's quick, it's easy, and it ain't rocket science. Sound effects from Freesound.org and Soundbible.com. The referenced video (woodturning a rocket ship) by Rick McQuay is at: https://www.youtube.com/watch?v FgEWtjx2ohk#action share

 

An Aluminum Christmas Tree Ornament ·
By: RickTurns
September 25, 2015 · 4,797 views

Turn a shiny Christmas tree ornament out of aluminum! It's not expensive, it's not hard, and you'll have a unique ornament for your tree.

 

Woodturning a Winged Lacewood wall ornament video #2 ·
By: Templeboy Turnings
September 23, 2015 · 1,492 views

My second video showing the process of turning a winged wall platter. I dedicate this video to my late father !! music: http://www.bensound.com/royalty-free-music (thank you)

 

A Weedpot Christmas Tree Ornament ·
By: RickTurns
September 18, 2015 · 1,847 views

With only a small scrap of wood and some dried or artificial flowers, you can make a really nice Christmas tree ornament.

 

Trees & Clay BarWare ·
By: treesandclay
August 30, 2015 · 587 views

The first in a series of videos highlighting a new line of products. More videos to come...

 

Segmented, Scrolled and Turned Christmas Ornaments (part 3) by Dan Douthart ·
By: Gwinnett Woodworkers
June 10, 2015 · 5,370 views

This is part three of a series of videos on how to make 4 segment Christmas ornaments starting with scrolling the segments. Recorded and presented in HD. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 4) by Dan Douthart - turning ·
By: Gwinnett Woodworkers
June 09, 2015 · 3,642 views

Part four covers several pattern types that look especially good with this technique. Dan demonstrates how he turns a prepared 4 segment scrolled ornament. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 2) by Dan Douthart ·
By: Gwinnett Woodworkers
June 09, 2015 · 4,108 views

This is part two of a series of videos on how to make 4 segment Christmas ornaments covering how use your computer to make patterns for the 4 segment ornaments. Recorded and presented in HD. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 1) by Dan Douthart - Intro ·
By: Gwinnett Woodworkers
June 09, 2015 · 6,158 views

This is part one of a series of videos on how to make 4 segment Christmas ornaments starting with scrolling the segments. Recorded and presented in HD. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Wood turning ornamental mushroom beech ·
By: iturn
June 09, 2015 · 286 views

https://m.facebook.com/iturnuk

 

Woodturning An Ornament Or Birdhouse Stand ·
By: As Wood Turns
June 04, 2015 · 2,788 views

http://www.AsWoodTurns.com In preparation for this year's Christmas Ornament Woodturning Challenge, I decided to make my own ornament stand. It could also be used for a birdhouse or any other small hanging. It is surprizingly easy to make. The base is scrap wood from another project. The brass is 1/16' diameter brass rod but should be heavier such as 1/8' diameter to be less bouncy. This stand is finished with Mylands Friction Polish. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Photo ornament ·
By: micpen22
December 25, 2014 · 120 views

Christmas Ornament Video held off posting this until now do to the fact that they are for my wife for Christmas

 

Woodturn A Holiday Star ·
By: As Wood Turns
December 23, 2014 · 4,763 views

http://www.AsWoodTurns.com To wind up the Christmas season, peace on earth seems to be further away than in year's past. I hope this ornament can symbolize a quest for peace on earth as well as a reminder of Jesus Christ for those who believe in Him. May we have more tolerance for others and work toward peace on earth. This star is maple with a background of red oak. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

woodturning-snowman ornament ·
By: Peter Matthew
December 22, 2014 · 563 views

 

Christmas Tree Ornament - Woodturners POV ·
By: Peter Macgregor
December 20, 2014 · 127 views

Getting in the festive spirit with a quick silver birch Christmas tree. Shot using a GoPro Hero 3 to show what a turner see's at the Lathe.

 

How to Woodturn a snowman ·
By: Robbiethewoodturner
December 19, 2014 · 13,239 views

Hi all here is a video on How to Wood turn a snowman Woodturning a yew natural edge hollow Form https://www.youtube.com/watch?v XkokZ_CrDLM woodturning a spalted beech Bowl https://www.youtube.com/watch?v -khKVOjiC-k woodturning a pumpkin Box https://www.youtube.com/watch?v hFUCzA5aYOw woodturning a Butter Dish https://www.youtube.com/watch?v jY9gNj9-vOY Welcome to my wood turning channel, I have lots of free videos with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood turned on a lathe. enjoy.

 

Results for the Christmas ornament challenge ·
By: Carl Jacobson
December 18, 2014 · 5,674 views

We want to thank everyone who entered the challenge. I want to thank Alan Stratton for putting on The Christmas Ornament Challenge with me. Alan Stratton's channel https://www.youtube.com/user/AsWoodTurns Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors for the Christmas Ornament Challenge ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show

 

2014 Christmas Ornament Woodturning Challenge Results ·
By: As Wood Turns
December 18, 2014 · 2,898 views

http://www.AsWoodTurns.com At last, we're announcing the results for this year's challenge. The response has been amazing -- Thank you all. Here's a link to the challenge playlist http://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Congratulations to our finalists. Everyone for whom we have an email address will also receive a certificate for their participation. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Sponsors for the Christmas Ornament Challenge ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolwork s.com/ Crabtree Tools http://toolsbycrabtree.com

 

Woodturn An Acorn Christmas Ornament ·
By: As Wood Turns
December 12, 2014 · 3,649 views

http://www.AsWoodTurns.com I want to add another simple ornament to this year's Christmas Ornament Woodturning Challenge. This is an acorn made from walnut and elm. It is very light since I hollowed the inside. It is about 1' in diameter an over 1 inch long. My acorn is finished with shellac friction polish. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

2014-12-08 Turned Christmas Ornaments quick,easy, cheap - globe ·
By: Gwinnett Woodworkers
December 10, 2014 · 8,668 views

This video demonstrates turning of attractive Christmas ornaments using simple pine and tools that many beginning turners would already have. This first video of the pair shows how to turn several of the globes at once using a pen mandrel. A PDF handout accompanies this available from this link https://www.dropbox.com/s/8a9sy7wpw8osl9w/Christmas%20Tree%20Ornaments%2C%20A%20Quick%20and%20Easy%20Method.pdf?dl 0 Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

2014-12-08 Turned Christmas Ornaments quick,easy, cheap - finial and icicle ·
By: Gwinnett Woodworkers
December 10, 2014 · 14,245 views

This video demonstrates turning of attractive Christmas ornaments using simple pine and tools that many beginning turners would already have. This second video of the pair shows how to turn the finial and icicle. A PDF handout accompanies this available from this link https://www.dropbox.com/s/8a9sy7wpw8osl9w/Christmas%20Tree%20Ornaments%2C%20A%20Quick%20and%20Easy%20Method.pdf?dl 0 Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Project 02 Robert Sorby Snowman by Nick Cook ·
By: Robert Sorby
December 08, 2014 · 7,360 views

 

More Chrristmas Trees & Snowmen ·
By: BMac Woodturning
December 05, 2014 · 6,493 views

Welcome to my new channel. I will put all my future turning related videos here but there will be a playlist of turning videos on my 'baconsoda' channel. If you would like to see those please use the link to the playlist below. https://www.youtube.com/playlist?list PLBLi8giCKnnpB8dC8lEd8gXcKOE78R-Pt

 

Woodturn A Molecule Christmas Ornament ·
By: As Wood Turns
December 05, 2014 · 10,590 views

Christmas Ornament Woodturning Challenge 2014 playlist http://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ http://www.AsWoodTurns.com This year I really wanted to make this ornament, a maple globe with orbiting padauk resembling a molecule or, in a stretch, a planet with moons. This one was fun. I started with 5 segmented rings of 12 segments each: 4 maple and 1 padauk. Then I sliced the padauk into 6 slices but only used 5 of the slices. At this point my segment count is 108. But wait there's more. After gluing into a ball, I sliced the ball 4 times and inserted one thin

 

Lightsaber Follow-up/Christmas Ornament Challenge ·
By: Carl Jacobson
December 01, 2014 · 4,847 views

This is the follow-up video for the Lightsaber! I made Friday. I did some inside out turning on the staff, so the light would shine through. Sterling Davis https://www.youtube.com/user/SterlingsWoodcrafts Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors for the Christmas Ornament Challenge ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show

 

woodturning off center ornament ·
By: Peter Matthew
November 30, 2014 · 793 views

this ornament didn't come out perfect but i think its a nice little project that you can get done in an hour or so. I used maple burl and cherry for mine.

 

JND Woodturning: Christmas Ornament ·
By: Jesse DiMura
November 30, 2014 · 336 views

Christmas Ornament made out of Flame Box Elder

 

Christmas Ornament with Plexiglass ·
By: Glen Clark
November 30, 2014 · 443 views

Christmas Ornament with Plexiglass top and bottom

 

Christmas Ornament ·
By: Jerry Brown
November 30, 2014 · 241 views

Who else can turn 5 pieces of good scrap wood into a little old dragon themed ornament :)

 

Turning a Christmas Tree Ornament ·
By: Brad Vietje
November 29, 2014 · 42,497 views

This video shows how to turn a Christmas Tree ornament. Involves off-center, multi-axis turning, and many how-to tips.

 

Entry for the 2014 Christmas Ornament Challenge -- Christmas-Star-Bowl ·
By: PeteTGIF
November 29, 2014 · 1,099 views

As there are all the awesome decorations for Christmas out this year, I thought to give credit to the work Santa's making. I hope he'll enjoy this year's cookies from my Christmas-Star-Bowl. Segmented bowl out of beech, 8 segments. Overall dimensions: 10'' by 1.9'', including the rays and the foot. Inner dimensions of the bowl app 4.5'' by 1.5''. Sanded to 600 grid and finished with sanding sealer and a food safe mixture from bees- and canauba wax. Special thanks to the ones who challenged us this year: Alan Stratton from As Wood Turns: https://www.youtube.com/user/AsWoodTurns Carl Jacobson

 

Celtic Knot Christmas Ornament ·
By: Derek Oliver
November 29, 2014 · 909 views

A Christmas ornament with three celtic knots. The celtic knot on the globe is a six strand knot and the two knots on the finials are three strand knots.

 

Making Christmas Tree Ornaments and Decorations ·
By: Abston Wood Crafts
November 29, 2014 · 37 views

https://www.etsy.com/shop/AbstonWoodCrafts?ref hdr_shop_menu http://abstonwoodcrafts.com/ Tis the season for decorating your home for Christmas. People everywhere set up various types of decorations and add enough ornaments to their trees to leave Santa scratching his head. A very unique way of decorating your tree and your home is to use ornaments and other decorations you made yourself. When your friends and family come over, those decorations will quickly become the center of conversation.

 

Birdhouse Ornament Part 2 of 2 ·
By: Bob Hamilton
November 28, 2014 · 8,157 views

Carl and Alan are trying to get folks to upload Christmas ornament videos so I finally forced myself to sit down at the computer long enough to edit some video. This is one is a whimsical birdhouse style ornament turned from walnut and box elder. Ooops! I guess I was kind of hurrying through the editing and didn't catch the part where I stopped to sharpen the parting tool. That is the kind of 'dead time' that I usually chop out, but I missed this one. Sorry about that!

 

Birdhouse Ornament Part 1 of 2 ·
By: Bob Hamilton
November 28, 2014 · 7,313 views

Carl and Alan are trying to get folks to upload Christmas ornament videos so I finally forced myself to sit down at the computer long enough to edit some video. This is one is a whimsical birdhouse style ornament turned from walnut and box elder.

 

Woodturning a hollow Christmas bauble ·
By: Sam Coeck
November 28, 2014 · 322 views

Woodturning a hollow Christmas bauble from pear wood. I basically turn it as a small thin hollow form with a small opening and a cap. No glue or other chemicals used.

 

Woodturn A Sputnik Sea Urchin Christmas Ornament ·
By: As Wood Turns
November 27, 2014 · 2,489 views

http://www.AsWoodTurns.com This ornament displays a sputnik sea urchin shell on finials of walnut and a tropic hardwood. The sea urchin shell is prepared by coating the insides with white glue and sanding the holes perfectly round. The finials are finished with shellac friction polish. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Christmas Ornament Segmented Challange ·
By: Glen Clark
November 26, 2014 · 284 views

Segmented Christmas Ornament for the Challenge giving by Carl Jacobson and Allan Stratton. Thanks for watching. Still learning my video editing software and self directing...

 

Christmas Ornament Wood Turning Challenge, My Crazy attempt. ·
By: Turning Round
November 25, 2014 · 16,539 views

This is my attempt to make a Christmas Ornament for the 2014 Christmas Ornament Wood Turning Challenge. I think I captured the spirit of have some fun with the video, and I also tried to do something a bit different. I am not sure who else would try to save a clump of hardened resin from a couple of year old can of resin. This goes along with my scrap bin challenge take a look at this video when you have an extra few minutes. http://youtu.be/DxjCcc2o5MI I have also launched a new Etsy Store front, take a look and if you like it please add it to your favorites in your Etsy store. https://www.etsy.com/shop/TurningRound?ref hdr_shop_menu

 

2014 Christmas Ornament Challenge, Second entry ·
By: Yuval Lahav Woodturning
November 25, 2014 · 2,605 views

My second entry to Carl's and Allen's 2014 Christmas Ornament turning challenge! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ I wanted to credit the music in my video, all the songs were download from http://www.freemusicarchive.org/, a site that gives access to free music, I'm not affiliated with them, or were asked to do this, I just thought it fair, and also if someone wanted to get the music in the videos for themselves, now they can do so, so the songs in order are: Jonathan Mann - 'All The Ice King Wants For Christmas' Wiredrawn - 'Christmas Wish No. 3571' Dott - 'This Christmas' Snowy O. McSnowerson and the Oh So Snowly Snowers - 'Feliz Navidad' Hope y'all enjoy this video, and have a merry Christmas and happy holidays!!

 

Woodturning Christmas Ornament ·
By: Peter Matthew
November 25, 2014 · 647 views

This ornament is my second entry to this year's ornament challenge. I turned mine out of cherry and maple and used butcher block conditioner as a finish.

 

Acorn ornaments ·
By: micpen22
November 24, 2014 · 869 views

Christmas Ornament, for the Allen and Carl Challenge

 

Small Black Walnut Ornament ·
By: Glen Clark
November 23, 2014 · 366 views

Sorry not much talking, Just a single position. Using a Nikon CoolPix. Lightworks video software. old Craftsman Lathe.

 

My Entry for the 2014 Christmas Ornament Woodturning Challenge ·
By: The Weekend Woodturner
November 22, 2014 · 489 views

 

Hunter#1OrnamentTool and Tolly Measuring Tools ·
By: Vinces WoodNWonders
November 22, 2014 · 1,194 views

The Hunter#1OrnamentTool and Tolly Measuring Tools are perfect for turning and measuring ornament globes! Thank you for watching!

 

2014 ORNAMENT CHALLENGE ·
By: Lou VanDyne
November 22, 2014 · 21 views

2014 ORNAMENT CHALLENGE

 

Christmas Lights ·
By: Carl Jacobson
November 21, 2014 · 12,792 views

OK, That was a little more than a design change. These little lights are a great way to use up scraps, and fun to turn. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors for the Christmas Ornament Challenge ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Nova Infinity Sys

 

Snowman for the Christmas Challenge ·
By: Mauro il tornitore
November 21, 2014 · 3,356 views

A snowman on the lathe - third and last entry for the Christmas Challenge Ornament

 

Three Sided Inside Out Christmas Ornament ·
By: As Wood Turns
November 21, 2014 · 8,396 views

http://www.AsWoodTurns.com I wanted to turn another inside-out ornament for this years Christmas Ornament Woodturning Challenge. But I also wanted it to be a little different than before. So, this inside-out ornament is a three sided ornament which presents a little more of a challenge because the stave angles are different and harder to get right. This is made from three pieces of walnut ripped at 60 and 120 degrees. They are temporarily fastened together while turning the inside cavity. With that cavity finished, the staves are taken apart, rotated and permanently glued back together again.

 

Christmas globe in green ·
By: Steve Krumanaker
November 21, 2014 · 794 views

I created this video with the YouTube Video Editor (http://www.youtube.com/editor)

 

Bottle Stopper Christmas Ornament ·
By: Weekend Wood Dust
November 21, 2014 · 476 views

My entry into the 2014 Christmas Ornament Wood Turning Challenge. Here's a link to the challenge playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ

 

Wood Turning - Christmas Ornament Challenge ·
By: Mike Waldt
November 20, 2014 · 28,378 views

My entry for the Christmas Ornament Challenge, organised by Carl Jacobson and Alan Stratton. I'll be using Lime for the body, and Purple Heart for the finials. Guitar by Michael Berk: https://www.youtube.com/user/mikeberk810

 

How to make the Champagne Bottle Ornament ·
By: Daniel Vilarino
November 20, 2014 · 424 views

Hi, This is a separate video containing a presentation explaining how to make the champagne bottle ornament. I decided to post it as a separate video because the lenght of the process was getting too long. If you follow these plans, please leave more space for the base threading and relief cut. Otherwise it might prove difficult to get even a couple of threads. I want to give a shout to Sam Angelo, the wyoming woodturner, I learned how to do thread chasing watching his videos, and he is a master for doing this. I hope you enjoy the video, and if you do, please like it, subscribe and comment. If for any reason you do not like it, and decide to give it a thumbs down, that is ok, but please, also comment and say what you did not like. I strive to do the best in my videos and criticism is always welcome. Cheers! Daniel

 

2014 Christmas Ornament Challenge 3rd Entry DRV ·
By: Daniel Vilarino
November 20, 2014 · 1,595 views

Hi! This is my third entry to the 2014 Christmas Ornament Challenge presented by Alan Stratton and Carl Jacobson. I have another video containing the presentation of how I made this ornament. I will post it soon and link this video to that one. I tried something new in this one, some thread chasing, first time I do it. I guess I will have to practice quite some more before getting to the level of Sam Angelo and many other woodturners that master this technique. Still, though a bit tight, the threads worked!! I could not film the part in which I made the perforations in the body of the bo

 

Wood Turning #94 Texted A Challenged Christmas Ornament ·
By: The Tiny Trailer Workshop
November 20, 2014 · 1,996 views

Well here is another way to use up some more of that Scotch Broom! Having the branch growing in just that right spot made this an ideal piece! This piece is probably 25 or 30 years old and is starting to show its age! Because the core has darkened over the years... it made it very easy to use ebony as a filler. As a matter of fact... chances are that if you saw it in person... you probably wouldn't notice it... even if you knew it was there! Cap'n Eddie's shine juice was always a favourite of mine in the early years of my turning. But I am afraid that I haven't gotten around to getting any of

 

Wood Turning #94 A Challenged Christmas Ornament ·
By: The Tiny Trailer Workshop
November 20, 2014 · 6,556 views

Well here is another way to use up some more of that Scotch Broom! Having the branch growing in just that right spot made this an ideal piece! This piece is probably 25 or 30 years old and is starting to show its age! Because the core has darkened over the years... it made it very easy to use ebony as a filler. As a matter of fact... chances are that if you saw it in person... you probably wouldn't notice it... even if you knew it was there! Cap'n Eddie's shine juice was always a favourite of mine in the early years of my turning. But I am afraid that I haven't gotten around to getting any of

 

Ornament challenge ·
By: Wood4turning
November 18, 2014 · 128 views

 

Segmented Christmas Ornament ( Long version) ·
By: Carl Jacobson
November 17, 2014 · 4,504 views

Segmented Christmas ornament, I turned a little segmented ornament. It's Zebra wood, Padauk, and Maple. It's 7' tall. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking car

 

Christmas Ornament Follow-up ·
By: Carl Jacobson
November 17, 2014 · 3,388 views

Segmented Christmas ornament, I turned a little segmented ornament. It's Zebra wood, Padauk, and Maple. It's 7' tall. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_men

 

#54 Woodturning a Segmented Christmas Ornament Part 2 of 2 ·
By: Stephen Ogle
November 17, 2014 · 7,475 views

This is the exact same video as #54 except for the music over voice problem. I apologize for the problems with the previous video. I will remove it shortly. Part 1 is at: https://www.youtube.com/watch?v AUS1IRk4Ens&list UUDVVYzYJ-0Ye0kJAx8SQAEw Vince's Wooden Wonders: http://vinceswoodnwonders.com

 

2014 Christmas Ornament Challenge, First entry ·
By: Yuval Lahav Woodturning
November 16, 2014 · 21,535 views

My entry to Carl's and Allen's 2014 Christmas Ornament turning challenge! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ I wanted to credit the music in my video, all the songs were download from 'http://www.freemusicarchive.org/', a site that gives access to free music, I'm not affiliated with them, or were asked to do this, I just thought it fair, and also if someone wanted to get the music in the videos for themselves, now they can do so, so the songs in order are: Jonathan Mann - The First Christmas Leah Morrow - Winter Wonderland Travis Taylor (feat. Emily Vella) - The Christmas Song Jonathan Mann - Nice King Hanukkah Song Hope y'all enjoy this video, and have a merry Christmas and happy holidays!!

 

1 Ornament Turning Challenge Entry 2014 ·
By: Eric Percival
November 16, 2014 · 419 views

This video is about Ornament Turning for the 2014 ornament turning challenge.

 

Turn a Christmas Ornament Pt3 ·
By: Woodcraft of Spokane
November 16, 2014 · 416 views

This is Part 3 of 3, , , John demonstrates how easy it is to turn a Christmas ornament on a wood lathe. This can be adapted to making lamp pulls, fan pulls, etc. These videos are done in front of a live audience and questions are asked throughout. John tries to re-state the question so you have the complete context of the demo. We hope you enjoy this series.

 

Segmented Christmas Ornament ·
By: Carl Jacobson
November 14, 2014 · 11,360 views

Segmented Christmas ornament, I turned a little segmented ornament. It's Zebra wood, Padauk, and Maple. It's 7' tall. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_men

 

Christmas Ornament 2014 ·
By: Chris Pine
November 14, 2014 · 3,131 views

Christmas Ornament 2014. In the theme of traditional Christmas toys, like the elves would make. I make this Bi-Plane Ornament from several woods. The Wings and tail surfaces are made from thin cocobolo, the propeller is made from cherry, the fuesalage is maple and the engine shroud is walnut. This is my first attempt at eccentric turning. This was a very fun project and I would encourage you all to enter an ornament in this years contest. Announcing the 2014 Christmas Ornament Woodturning Challenge sponsored by As Wood Turns, Alan Stratton, and Woodshop TV, Carl Jacobson. Challenge vid

 

Christmas tree off centre ·
By: Mauro il tornitore
November 14, 2014 · 945 views

A Christmas tree of oak wood for my second contribution to the Christmas Ornament Challenge issued by Alan Stratton and Carl Jacobson.

 

Turn a Christmas Ornament Pt2 ·
By: Woodcraft of Spokane
November 14, 2014 · 443 views

This is Part 2 of 3, , , John demonstrates how easy it is to turn a Christmas ornament on a wood lathe. These videos are done in front of a live audience and questions are asked throughout. John tries to re-state the question so you have the complete context of the demo. This second segment covers more on tool options, problems you may encounter while turning etc. We hope you enjoy this series.

 

Woodturning Christmas Ornament From Pen Blanks ·
By: As Wood Turns
November 13, 2014 · 5,188 views

http://www.AsWoodTurns.com For this ornament I wanted to try a variety of wood in a simple globe. Rather than scrounge for the wood, I chose nine pen blanks I purchased at a holiday sale. The pen blanks, though nice, would have blended together. To avoid this, I milled thin strips of walnut to glue between the blanks to separate and highlight the 'exotic' woods. After hollowing the globe, I turned a top and bottom finial that are joined by a small dowell thru the now hollow globe. A little wire formed into a loop and glued into the top finial completes the ornament. The pen blanks were stabilized with thin CA glue. All wood is finished with shellac friction polish. I let everyone on my email list know when the next easy woodturning project video is ready. Enter your email at http://www.AsWoodTurns.com. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Turn a Christmas Ornament Pt1 1 ·
By: Woodcraft of Spokane
November 13, 2014 · 906 views

This is Part 1 of 3, , , John demonstrates how easy it is to turn a Christmas ornament on a wood lathe. These videos are done in front of a live audience and questions are asked throughout. John tries to re-state the question so you have the complete context of the demo. This first segment covers things such as sizing your blank, mounting it to the lathe, tool selection, etc. The later part goes into actual turning. We hope you enjoy this series.

 

#53 Woodturning a Segmented Christmas Ornament Part 1 of 2 ·
By: Stephen Ogle
November 11, 2014 · 7,950 views

This is the first part of a two part series. Featuring the building and turning of my entry into the 2014 Christmas Ornament Challenge. Sponsored by Carl Jacobsen and Alan Stratton. Part 2 is at: https://www.youtube.com/watch?v 4OT19KidiFs&feature gp-n-y&google_comment_id z13tidaonxyay5mql04cdbuh4mv2w5zqqac

 

Mark Baid 2014 Ornament Challenge entry ·
By: MARK Baid
November 11, 2014 · 637 views

My entry for the 2014 ornament challenge. The pieces made from Walnut and plum wood.

 

Ornament Follow-up and Full Length Videos ·
By: Carl Jacobson
November 10, 2014 · 3,514 views

If you would like me to start doing full length video no my Q&A channel let me know in the comments. Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_menu Thank you for supporting free woodworking videos https://www.paypal.com/cgi-bin/webscr?cmd _s-xclick&hosted_button_id 7MQRX83KCLJBA My Q&A Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee Website http://www.thewoodshop.tv/ Google https://plus.google.com/11319990456589302739

 

#52 My 2014 Christmas Ornament Challenge Entry ·
By: Stephen Ogle
November 09, 2014 · 9,730 views

Here is a short slideshow of my first Christmas Tree Ornament this year. I am entering this video in the Ornament Challenge from Carl Jacobsen and Alan Stratton from As Wood Turns. A full length 2 part video series is available now to viewing at: https://www.youtube.com/watch?v AUS1IRk4Ens&list UUDVVYzYJ-0Ye0kJAx8SQAEw Let us never forget that Christmas is a celebration of the birth of our Lord and Savior Jesus Christ. The season should begin and end with him first in our thoughts and deeds.

 

Wyatt's ornament entry 2014 ·
By: Rich McNatt
November 09, 2014 · 588 views

My 7yr old after 1 week of turning wanted to send in a entry so here it is

 

The Blind Wood Turner - Episode 10 ·
By: Blind Wood Turner
November 08, 2014 · 1,143 views

In this episode I am making a Christmas Ornament for Carl Jacobson & Alan Stratton's Christmas Competition.

 

Ornament #2 maple and walnut. ·
By: Rich McNatt
November 08, 2014 · 203 views

 

Ornament challenge #1 the lady ·
By: Rich McNatt
November 08, 2014 · 911 views

 

Christmas Ornament 1 Christmas Ornament Challenge ·
By: H F Bowern Designs - Harold Bowern
November 08, 2014 · 1,299 views

This is my first ever turning of a Christmas ornament. It is also my entry into Carl and Alan's Christmas Ornament Challenge. Made from scraps from the scrap bin. Thanks again for watching, I really do appreciate it. If you like this video, please click the 'Like' button. If haven't already don't forget to click the 'Subscribe' button, to continue watching more of my videos. You can also visit my website, http://hfbowern.com , where you will find samples of my woodworking projects, my BLOG, and other things about me and my hobbies. If you would like to follow my gardening projects on YouTube, you can find me at my YouTube gardening channel at https://www.youtube.com/user/TheOldWoodworker As always, bye for now, and I hope to see you on down the road!

 

Maple Christmas Ornament ·
By: Carl Jacobson
November 07, 2014 · 10,522 views

There has been a lot of great entries to the Ornament challenge. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ justin fiaschetti https://www.youtube.com/watch?v o1er8_mZynU&index 17&list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Sch

 

2014 Christmas Ornament Challenge Entry 3 ·
By: Custom Chris
November 07, 2014 · 5,733 views

Thanks to Carl and Alan for putting on the contest. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

2014 Christmas Ornament Challenge Entries 1&2 ·
By: Custom Chris
November 07, 2014 · 4,331 views

Thanks to Carl and Allen for putting the contest Hope every one has fun and happy holidays! Short video for the judges Come to my Amazon Store and find all your wood turning needs in one place. Easy to find products. http://astore.amazon.com/customchris-20 If you know a item that needs to be added to the store let me know. Profit go's towards the channel to make it better. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Many Woods Christmas Ornament for the Challenge ·
By: Mauro il tornitore
November 07, 2014 · 1,314 views

This is my first contribution to the 2014 Christmas Ornament Challenge proposed by Carl and Alan.

 

A Perfect Globe or Sphere Mirrored Christmas Ornament ·
By: As Wood Turns
November 06, 2014 · 7,486 views

http://www.AsWoodTurns.com This video is a combo. First, following a conversation with a fellow club member about his difficulty turning perfect balls and spheres, I'll demonstrate how to turn a perfect ball without having to buy and expensive jig. (and then finding the jig only does part of the job anyway.) Second, I'll use the sphere to create a Christmas ornament with mirrors set into its perimeter. For the Christmas ornament, I did not have to turn a perfect sphere -- not one would ever check for perfection and many would prefer a more elongated shape anyway. My ornament globe is walnut finished with shellac friction polish. The finials are turned from 'topical hardwood' pen blanks. The mirrors are 1' diameter from a local craft store. Beveled mirrors would be slightly better. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Turning Three Christmas Tree Ornaments - Acorn, Rolling Pin, Wine Bottle ·
By: RickTurns
November 05, 2014 · 8,753 views

Woodturning: turn three kinds of Christmas tree ornaments - acorn, rolling pin, and wine bottle. This video is one of several in which I turn quick and easy Christmas ornaments. The three ornaments in this video can be turned in 10 minutes or less, take only one small piece of wood, and make great Christmas trinkets to give to family and friends. Music courtesy of audionautix.com

 

TURNING AN ICICLE FOR AN ORNAMENT ·
By: WYOMINGWOODTURNER
November 05, 2014 · 3,762 views

Sam completes his ornament body by turning an Icicle. He shows the turning process as well as ebonizing a lighter colored wood.

 

2014 Christmas Ornament Challenge 2nd Entry DRV ·
By: Daniel Vilarino
November 05, 2014 · 24,060 views

Hi Everyone! This is my second entry for the 2014 Christmas Ornament Challenge presented by Alan Stratton and Carl Jacobson. I enjoyed turning these bells, and I like the way the paduak contrasts with the zebrawood. While turning the zebrawood bell (in the video it happens really fast, 60 times the normal speed) I applied friction at great speed to the border of the zebrawood bell with towel paper to produce the burn mark. I had a couple of mishaps while turning the clappers for the bells (I really need to practice with the skew chisel, I guess that tool will do a better job), and the clap

 

2014 Christmas ornament challenge on home made DIY lathe ·
By: Fiaschetti Woodworking
November 05, 2014 · 11,458 views

Please visit my new website http://www.fiaschettiwoodworking.com/ 2014 Christmas ornament challenge. This is my Christmas ornament that I have made out of cedar, redwood, and walnut. It is made on my home made lathe, with home made tools. fiaschettiwoodworking@gmail.com

 

Turned Wood Christmas Snowman Inside Out Ornament ·
By: Martin's Bazaar
November 05, 2014 · 27,445 views

American woodturner Carl Jacobson inspired me last week to have a go at 'inside-out' woodturning...and here is the result - A Snowman Christmas ornament. Needless to say, it took many hours to make, being the first one I have ever made, and as such went through various design modifications as the work progressed. Thankfully it didn't explode on the lathe, even though there is a hole in the top and the sides look more like a flower's petals wrapping the snowman. It was pretty scary at times turning this piece - A great learning experience for sure, and one that I am certain to repeat. The orn

 

Glowing Sputnik Christmas Ornament ·
By: Mark Choitz
November 05, 2014 · 1,089 views

Video tutorial on how to make a light up sputnik Christmas ornament on your wood lathe.

 

ornament update ·
By: Rich McNatt
November 04, 2014 · 87 views

 

Ornament, small fun project using scrap ( good kid project) ·
By: Rich McNatt
November 02, 2014 · 180 views

 

2014 Christmas Ornament Challenge 1st Entry DRV ·
By: Daniel Vilarino
November 01, 2014 · 2,190 views

1st Entry, Daniel R. Vilarino, 2014 Christmas Ornament Challenge Hi, my name is Daniel Vilarino and this video is to participate in the 2014 Christmas Ornament Challenge presented by Alan Stratton and Carl Jacobson. This is a first in several ways: it is my first YouTube video, it is the first time that I do hollow form in the lathe and also it is the first time that I use video editing software. So, I hope you like the result, and if you do, please give it a thumbs up. Also, please post your comments. I want to take this opportunity to wish everybody a Very Happy Holiday Season!

 

Turning an Ornament Body ·
By: WYOMINGWOODTURNER
October 30, 2014 · 6,872 views

Sam goes through his process of turning the body or globe of a traditional Christmas ornament.

 

Fitting an Ornament Globe and Finial woodturning ·
By: WYOMINGWOODTURNER
October 28, 2014 · 3,418 views

Sam demonstrates a technique for easily fitting a Christmas ornament globe with a finial.

 

Turning an Ice Cream Cone Christmas Tree Ornament ·
By: RickTurns
October 26, 2014 · 4,554 views

Woodturning: turn an ice cream cone Christmas tree ornament. This video is one of several in which I turn quick and easy Christmas ornaments. These ornaments can be turned in 15 minutes or less, take only one small piece of wood, and make great Christmas trinkets to give to family and friends. I 'mass produce' a lot of these each year for small Christmas gifts. Music courtesy of FromFreexmasmpe.com

 

Turning a Lighthouse Christmas Tree Ornament ·
By: RickTurns
October 23, 2014 · 24,796 views

Woodturning: turn a lighthouse Christmas tree ornament. This video is one of several in which I turn quick and easy Christmas ornaments. These ornaments can be turned in 15 minutes or less, take only one small piece of wood, and make great Christmas trinkets to give to family and friends. I 'mass produce' a lot of these each year for small Christmas gifts. Music courtesy of Audionautix.com

 

Snowman Ornament: 2014 Festival of Trees-Worland, Wy ·
By: WYOMINGWOODTURNER
October 23, 2014 · 4,890 views

Sam Angelo makes a turned snowman Christmas ornament that will be part of the Festival of trees fundraiser in Worland, Wy

 

Turning a Bell Christmas Ornament ·
By: RickTurns
October 20, 2014 · 29,265 views

Woodturning: turn a bell Christmas tree ornament. This video is one of several in which I turn quick and easy Christmas ornaments. These ornaments can be turned in 15 minutes or less, take only one small piece of wood, and make great Christmas trinkets to give to family and friends. I 'mass produce' a lot of these each year for small Christmas gifts. A text article on turning this ornament and two others can be found in the October issue of the Highland Woodturner, at this address: http://www.highlandwoodworking.com/woodturning-tips-1410oct/project/quick-and-easy-turned-christmas-ornaments.html Music courtesy of Audionautix.com

 

Turning a Christmas Bauble ·
By: Martin's Bazaar
October 20, 2014 · 370 views

Here, I turn a traditional wooden Christmas Tree Bauble.

 

Turning a Flying Saucer Christmas Tree Ornament ·
By: RickTurns
October 18, 2014 · 10,956 views

Woodturning: this is another video of one of the Christmas ornaments I turn each year. In this case, it's a flying saucer Christmas tree ornament.

 

Turning a Bell Shaped Christmas Ornament ·
By: IKI Woodturners
October 18, 2014 · 31,990 views

September 14, 2014 IKI Woodturners Presents: Turning a Bell Shaped Christmas Ornament Featuring: Keith Armstrong

 

Turning a Snowman Christmas Tree Ornament Part 2 ·
By: RickTurns
October 17, 2014 · 22,642 views

Woodturning: turn a snowman Christmas tree ornament. This is the second part about turning a snowman ornament, covering finishing the ornament. The first video (Turn A Snowman Christmas Ornament Part 1) covered the turning of the snowman shape. This video is one of several in which I turn quick and easy Christmas ornaments. These ornaments can be turned in 15 minutes or less, take only one small piece of wood, and make great Christmas trinkets to give to family and friends. I 'mass produce' a lot of these each year for small Christmas gifts. A text article on turning this ornament and two others can be found in the October issue of the Highland Woodturner, at this address: http://www.highlandwoodworking.com/woodturning-tips-1410oct/project/quick-and-easy-turned-christmas-ornaments.html

 

Turning a Snowman Christmas Tree Ornament Part 1 ·
By: RickTurns
October 17, 2014 · 38,932 views

Woodturning: turn a snowman Christmas tree ornament. This video is one of several in which I turn quick and easy Christmas ornaments. These ornaments can be turned in 15 minutes or less, take only one small piece of wood, and make great Christmas trinkets to give to family and friends. I 'mass produce' a lot of these each year for small Christmas gifts. A text article on turning this ornament and two others can be found in the October issue of the Highland Woodturner, at this address: http://www.highlandwoodworking.com/woodturning-tips-1410oct/project/quick-and-easy-turned-christmas-ornaments.html

 

Turning a Christmas Tree Light Ornament ·
By: RickTurns
October 16, 2014 · 3,134 views

Woodturning: turn a Christmas tree ornament in the shape of a 1960's-vintage Christmas tree light bulb. This video is one of several in which I turn quick and easy Christmas ornaments. These ornaments can be turned in 15 minutes or less, take only one small piece of wood, and make great Christmas trinkets to give to family and friends. I 'mass produce' a lot of these each year for small Christmas gifts. A text article on turning this ornament and two others can be found in the October issue of the Highland Woodturner, at this address: http://www.highlandwoodworking.com/woodturning-tips-1410oct/project/quick-and-easy-turned-christmas-ornaments.html

 

2014 Christmas Ornament Woodturning Challenge ·
By: As Wood Turns
October 15, 2014 · 9,576 views

http://www.AsWoodTurns.com Here's a link to the challenge playlist http://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Announcing the 2014 Christmas Ornament Woodturning Challenge sponsored by As Wood Turns, Alan Stratton, and Woodshop TV, Carl Jacobson. This is the third annual challenge. We'd had great responses to previous years. This year we're adding prizes to the top rated presenters. There are some rules: 3rd Annual Christmas Ornament Woodturning Challenge Rules and Guidelines. Rules 1. Ornament must be in good taste and somehow reflect the spirit of Christmas and/o

 

Ornament Follow-up ·
By: Carl Jacobson
October 13, 2014 · 4,877 views

Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_menu Thank you for supporting free woodworking videos https://www.paypal.com/cgi-bin/webscr?cmd _s-xclick&hosted_button_id 7MQRX83KCLJBA Here's a link to the challenge playlist http://www.youtube.com/playlist?list ... Announcing the 2014 Christmas Ornament Woodturning Challenge sponsored by As Wood Turns, Alan Stratton, and Woodshop TV, Carl Jacobson. This is the third annual challenge. We'd had great responses to

 

Ornament, inside out turning ·
By: Carl Jacobson
October 10, 2014 · 74,812 views

This ornament is an inside out turning. Inside out turning is done in two steps to create a hollow object. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes

 

Turning a rustic birdhouse ornament ·
By: Walter Wager
October 07, 2014 · 7,345 views

Demonstrates how to make a birdhouse ornament from a tree limb.

 

2014-07-19 Turned Ornament Trifecta ·
By: Gwinnett Woodworkers
October 02, 2014 · 15,108 views

George North, Dan Douthart, and Jimmy Rocker tag team their respective skills to bring you a laminated ornament with inlaid silhouettes. Individual parts of this were brought to you earlier this year. This time all 3 presenters each do their own portion of a cooking show style presentation. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

HK 50A Presentation, Ornament ·
By: Paul Crabtree
September 24, 2014 · 362 views

How to use the HK-50A 'Hollowing King' hollowing tool. How to make a Christmas tree ornament. Safety of the tool. Accuracy of the tool. Versatility of the tool. Ease of setting the calipers.

 

Woodturning a Shadow Box Christmas Ornament ·
By: India indian
September 16, 2014 · 94 views

 

Woodturning a Christmas Ornament Part 2 of 2 ·
By: India indian
September 16, 2014 · 32 views

 

a Christmas Ornament Part 1 of 2 ·
By: India indian
September 16, 2014 · 22 views

 

Bell Ornament for Christmas---- by Wyomingwoodturner ·
By: WYOMINGWOODTURNER
August 15, 2014 · 7,201 views

Sam demonstrates the process of turning a Bell Ornament which can be a nice Tree decoration for christmas.

 

2014-02-08 Creating Christmas Ornament Plaques for Woodturning ·
By: Gwinnett Woodworkers
May 28, 2014 · 3,914 views

http://www.gwinnettwoodworkers.com Creating Christmas Ornament Plaques 02-08-2014 Bob Brokaw and George North demonstrate how to use a picture to create a set of silhouette plaques to apply to a core for a turned Christmas ornament. This class will show how the profile pictures start out as a plaque and proceed to an inlaid silhouette. Bob will explain how to select or take a picture suitable to turn into a silhouette. The silhouette is then set into a pattern to create a stack cut inlaid plaque. At GWA, the most popular program to render the patterns is DeltaCAD. Bob and George explain the steps necessary to import the picture, trace it, size it and create the pattern. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

2014-02-13 - Globe Ornaments by Jimmy Rocker ·
By: Gwinnett Woodworkers
May 04, 2014 · 35,280 views

http://www.gwinnettwoodworkers.com Globe Ornaments by Jimmy Rocker - Feb 13, 2014 GWA member, Jimmy Rocker, demonstrates how he turns a spherical Christmas ornament from a glued block with a scroll saw silhouette or spalted wood plaque affixed on four sides. He also show his finishing technique using rattle can lacquer and a Beall buffing system. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

NEFWA November 2013 Christmas Ornament ·
By: North East Florida Woodturners Association
March 10, 2014 · 3,346 views

Christmas Ornament Demonstration of turning a Christmas Ornament by Ed Malesky at the November 2013 meeting of the Northeast Florida Woodturners Association.

 

Turn an Angel Ornament ·
By: Mike Peace Woodturning
January 02, 2014 · 60,542 views

In this video Mike Peace demonstrates how to wood turn an angel Christmas ornament of wood on a lathe. This is a basic spindle woodturning project that can be used to develop or enhance the ability to use a skew while still producing a useful item.

 

Star Of Bethlehem Laser Cut Christmas Ornament ·
By: As Wood Turns
December 25, 2013 · 3,484 views

http://www.AsWoodTurns.com We're celebrating Christmas with a Christmas Ornament Woodturning Challenge. This is my last entry for this year. This star is not a woodturning. But I think it is cool enough to enter the challenge. It is cut with a laser from 1/8 inch Baltic birch playwood. Depending on how it is hung, it takes a variety of dynamic, springy shapes. Merry Christmas. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. View the complete challenge playlist at http://www.youtube.com/playlist?list PL4W9FE566kZg607Dx9qIPk0P1dto5obIJ

 

Merry Christmas ·
By: treesandclay
December 25, 2013 · 2,016 views

A few small Christmas presents...

 

Turning Bird House Ornaments ·
By: Steve Lindsley
December 24, 2013 · 33,534 views

For my holiday projects this year I decided to turn bird house ornaments. I bought a few Dale Nish kits from Craft Supplies. The kit has everything you need to complete the project including a small bird for the perch and the eyelet for the top. Since I had 9 gifts to make I did change some of the supplied wood with some nice figured walnut that I had in the shop. I apologize for the lenght of the video. I edited out as much as I thought possible without taking away from the content. Also, a few sections have focus issues....I had the legs of the tripod against the lathe and it picked up some vibration. Live and learn! Thanks for watching. Comments are always welcome!

 

Inside Out Woodturning | Christmas Tree Ornament ·
By: ThisWoodwork
December 22, 2013 · 77,341 views

Merry Christmas! Yet another Christmas tree ornament this year, sorry! In this video I take a second look at very simple inside-out woodturning, to make this interesting Christmas tree decoration. -------------------------------------------------------------------- Social Links... My Blog Channel: http://www.youtube.com/user/ThisWoodworkVlog Facebook Page: http://www.facebook.com/thiswoodwork Twitter Page: https://twitter.com/ThisWoodwork Google Plus: https://plus.google.com/u/0/b/114211522882686187159/114211522882686187159/ -------------------------------------------------------------------- Special thanks to Kevin MacLeod: http://incompetech.com/ for the music used in this video. -------------------------------------------------------------------- alex harris woodwork woodworking woodturning wooden thiswoodwork wood turning how to make

 

Wood Turning Hot Air Balloon Ornament ·
By: Carl Jacobson
December 20, 2013 · 9,558 views

ChefwareKits https://www.chefwarekits.com/?tracking carl My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

#15 Woodturning a Shadow Box Christmas Ornament ·
By: Stephen Ogle
December 20, 2013 · 8,966 views

I wanted to make another type of Christmas ornament and decided to try a shadow box to contain a picture of my kids. This is how I did it.

 

Finial Montage ·
By: treesandclay
December 20, 2013 · 2,564 views

These are dregs from the Christmas ornament video. Just a little more to watch if you want.

 

Woodturning a Christmas Ornament ·
By: treesandclay
December 18, 2013 · 5,353 views

Churning out a batch of ornaments just in time for Christmas. All the dark wood is walnut and the globes are cherry.

 

Christmas greetings - Special Video- create SnowMan with candle ·
By: Confusion Wood
December 17, 2013 · 5,911 views

http://www.youtube.com/subscription_center?add_user ConfusionWood Christmas greetings - Special Video- create SnowMan with candle my channel: http://youtube.com/ConfusionWood

 

SNOW day snowmen ·
By: sistermaide
December 16, 2013 · 54 views

Getting down to the wire, what will I make for my bus kids? I know, how about the snowmen, but they need to be decorated! I know, I will use my Tombow markers!

 

How to Make a Wood Turned Christmas Ornament ·
By: WildWood Design
December 15, 2013 · 2,619 views

In this one part How-To video, we cover the basic steps in making a Christmas Ornament using the WildWood 2013 Finial Kit. Visit BangleGuy.com to purchase the finial kit and wedding ring mandrel seen in this video. We also carry DIY ring kits, bangle kits, wood and much more!

 

Ornament Inside-Out Turning 2 of 2 ·
By: Cip's Wood Chips
December 14, 2013 · 98,567 views

This is the second half of the inside-out turning of the Christmas Ornament Challenge. Glue Block video at http://www.youtube.com/watch?v l76ucLHx2WY

 

Ornament Inside-Out Turning 1 of 2 ·
By: Cip's Wood Chips
December 14, 2013 · 17,824 views

I response to Alan Stratton's and Carl Jacobson's Christmas Ornament Challenge.. Glue block video: http://www.youtube.com/watch?v l76ucLHx2WY

 

Wood Turning Walnut and Oak Christmas Ornament ·
By: Carl Jacobson
December 13, 2013 · 14,134 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. I turned a Walnut and Oak Christmas ornament. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Coat Rack for Irene, Christmas 2013 ·
By: WYOMINGWOODTURNER
December 13, 2013 · 3,668 views

Sam makes a coat rack on the lathe which requires woodworking. This is very informative and provides some great shots. A short clip shows Irene and my wife Cheryle with the coat rack.

 

Woodturning A Segmented Christmas Bell Ornament ·
By: As Wood Turns
December 12, 2013 · 6,048 views

http://www.AsWoodTurns.com Here's my next entry to the annual Christmas Ornament Challenge that Carl Jacobson and I are sponsoring. This is a segmented Christmas Bell to sound off at the birth of the baby Jesus. Its body is made of apricot with 5 rings of 8 segments each for 40 total segments. In addition, it has a handle and a knocker made from laburnum or golden Chain. It is finished with walnut oil. Simple Challenge Rules: 1. Make an Christmas ornament. 2. Make a video of you making the ornament. 3. Upload the video to YouTube 4. Let me know the link to add your video to the playlist. 5. Enjoy your ornament consistent with the season. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. View the complete challenge playlist at http://www.youtube.com/playlist?list PL4W9FE566kZg607Dx9qIPk0P1dto5obIJ

 

#69 Adornos navideños Christmas ornaments ·
By: Miguel Sanchez
December 09, 2013 · 16,897 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Nos vemos a la vuelta de vacaciones. Que paseis una fantastica navidad y que el año proximo venga cargado de nuevos proyectos y nuestra familia y las vuestras crezcan y alcancen todas sus metas. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Turning 1 Snowman ·
By: sistermaide
December 09, 2013 · 95 views

Diane, of Sistermaide turns a snowman for Farmdotters. Etsy. This one has no sound, but rather is captioned. Created using Serif MoviePlus

 

# 34 Christmas Bell ·
By: The Tiny Trailer Workshop
December 07, 2013 · 916 views

A compilation of different woods combine to make an attractive Christmas Bell. Music from Tyler Carson can also be heard. www.tylercarsonmusic.com

 

Wood Turning Christmas Ornament ·
By: Carl Jacobson
December 06, 2013 · 20,270 views

ChefwareKits https://www.chefwarekits.com/?tracking carl My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

#33 A Christmas Soldier Ornament ·
By: The Tiny Trailer Workshop
December 06, 2013 · 2,061 views

Silver Birch and a Christmas Soldier go hand in hand as far as I am concerned! Add a little wire and you have a fully decorated ornament for your tree! The music you hear is Tyler Carson and you can find out more about him at www.tylercarsonmusic.com

 

#13 Woodturning a Christmas Ornament Part 2 of 2 ·
By: Stephen Ogle
December 05, 2013 · 9,101 views

Part 2. Turning a Maple Christmas Ornament, along with dying the wood for a different effect.

 

#12 Woodturning a Christmas Ornament Part 1 of 2 ·
By: Stephen Ogle
December 05, 2013 · 15,398 views

Turning a Maple Christmas Ornament, along with dying the wood for a different effect.

 

Woodturning A Christmas Ornament With Finials ·
By: As Wood Turns
December 05, 2013 · 3,747 views

http://www.AsWoodTurns.com It's time for the annual Christmas Ornament Challenge. Carl Jacobson and I are sponsoring this challenge. Rules: 1. Make an Christmas ornament. 2. Make a video of you making the ornament. 3. Upload the video to YouTube 4. Let me know the link to add your video to the playlist. 5. Enjoy your ornament consistent with the season. This ornament is walnut with cherry finials, all finished with friction polish. It is hollow to make it light enough to hang on a tree. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.

 

#32 Secret Compartment Christmas Ornament ·
By: The Tiny Trailer Workshop
November 30, 2013 · 1,275 views

A Christmas decoration with a hidden side!! Present a present in an private place in plain sight... Small gifts can be presented with little wrapping... Or... It could just be the gift itself! The main body (the onion) is Spalted Maple The cap and finial are Ebony The hanger is craft store thin gold (coloured) wire And in case you couldn't tell I really liked the way it fit... I guess that is why I managed to open and close it 10 times in one video!! Try it for yourself... it's fun!!! Thanks for watching and if you haven't already... Don't forget to subscribe! Larry

 

Christmas Icicle Project ·
By: woodturningwithtim1
November 29, 2013 · 9,681 views

Time to dress up the Christmas tree! Tim shows you how to make a quick and elegant icicle ornament.

 

#31 Apple Snowman ·
By: The Tiny Trailer Workshop
November 28, 2013 · 1,233 views

A trial of what can go wrong next... But I do believe that I am quite pleased with the results! As a matter of fact I think the way it turned out was better than the way I was planning on!! I should also note here the different woods used... The Snowman is Apple the final base is Birdseye Maple Burl the hat the eyes teeth and buttons are all Ebony while the nose is Padauk Thanks for taking the time to watch and if you haven't already... Don't forget to subscribe!

 

DAW Birdhouse Ornament Demonstration ·
By: Roger Meeker
November 18, 2013 · 1,001 views

DAW Demonstration by Alfred Schembri Tips and techniques for making Birdhouse Ornaments

 

Woodturning a Birdhouse Ornament ·
By: Walter Wager
November 03, 2013 · 40,004 views

Video shows how to use spindle gouges to turn a birdhouse ornament

 

Bell Ornament ·
By: Walter Wager
October 30, 2013 · 3,383 views

A woodturning video showing the use of spindle gouges when turning a bell ornament for a Christmas tree.

 

# 191 Christmas Light Project ·
By: Cap'n Eddie Castelin
September 30, 2013 · 8,009 views

Get an early start on Christmas ornaments by making a string of Christmas lights. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Sea urchin ornament video ·
By: Walter Wager
September 08, 2013 · 5,494 views

This video recognizes Cindy Droza's sea urchin's videos and presents a different way to make them using a center core that goes into the sea urchin. This allows them to hang straight even if the sea urchin isn't symmetrical.

 

2013-03-14 Birdhouse Ornaments by Bob Aldea (1h16m06s) ·
By: Gwinnett Woodworkers
June 19, 2013 · 16,263 views

Turning SIG 03-14-13 GWA Member Bob Aldea demonstrates his technique for turning small birdhouse ornaments on the lathe. From wood selection, to shaping, sanding, applying color and final finishing, Bob describes his entire process to achieve good results. Full Video (1:16) Filmed and uploaded in HD

 

Making a Sputnik Sea Urchin Ornament with Turned Wood Finials - Part 2 ·
By: Cindy Drozda
June 16, 2013 · 24,225 views

In part 2, I turn a cap and finial to fit onto a Sputnik Sea Urchin Shell to create a hanging ornament with turned finials. In part 1, I prepared the shell to accept the finials. Please take a moment to visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited. Happy turning, everyone!

 

2012-12-15 Turned Wooden Snowman Christmas Ornaments by Dan Douthart and Jack Morse (1h31m34s) ·
By: Gwinnett Woodworkers
May 18, 2013 · 4,634 views

GWA Class 12-15-12 GWA Member Dan Douthart demonstrates the techniques he used to turn wooden snowmen bell ornaments for the annual GWA Christmas party. Jack Morse continues with the airbrush to apply color, masked letters and talk about finishing. Full Video (1:31:34) Filmed and uploaded in HD.

 

2012-08-09 Laminated Turned Christmas Tree Ornaments by Bill Baker (1h18m47s) ·
By: Gwinnett Woodworkers
May 13, 2013 · 10,550 views

Turning SIG 08-09-12 GWA Member Bill Baker demonstrates his techniques in creating laminated, turned Christmas tree ornaments. From glue-up to finished, finial-applied ornament, Bill relates his methods, materials, tools and techniques, including Q&A. Full Video (1:18:47) Filmed and uploaded in HD.

 

Making a Sputnik Sea Urchin Ornament with Turned Finials - Part 1 ·
By: Cindy Drozda
April 30, 2013 · 16,635 views

In part 1, I show how I prepare the Sputnik Sea Urchin Shell to become the body of a hanging ornament with turned finials. In part 2, I will turn the finials. Please take a moment to visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited. Happy turning, everyone!

 

small thing ·
By: treesandclay
March 17, 2013 · 1,461 views

Messing around with some Christmas ornament and finial thoughts for next year. Not going to win any awards, but sometimes it's nice just to have something to watch, maybe a little inspiration.

 

Christmas Ornaments ·
By: Jim Ballard
March 16, 2013 · 3,696 views

Turning Christmas Ornaments on a wood lathe

 

31 - Christmas Ornaments - Roland Hege - 2Nov2010 ·
By: Waxhaw Woodturners
January 29, 2013 · 1,436 views

Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwt.com Video by Rich Hansen.

 

My Edited Video ·
By: Wood4turning
January 21, 2013 · 306 views

I created this video with the YouTube Video Editor (http://www.youtube.com/editor)

 

eccentric woodturned christmas ornament challenge ·
By: Jérôme Hamel
December 25, 2012 · 1,624 views

christmas ornament made of walnut and maple

 

Woodturning Christmas Ornaments: The Star of Bethlehem ·
By: As Wood Turns
December 24, 2012 · 9,778 views

http://www.AsWoodTurns.com This Christmas Ornament is woodturned walnut and maple about 6' high and 4.5' in diameter. The walnut body and maple finials are finished with friction polish. The ornament has a handmade brass hanger. The Star of Bethlehem represents the sign given for the birth of Jesus Christ, the true center of Christmas. The challenge with this ornament is accurately drilling the tenon holes in the star's body, then replicating 12 side finials. This ornament is part of the Christmas Ornament Woodturning Challenge 2012. Please view the playlist at http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom. Carl Jacobson and I are sponsoring this challenge. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Christmas tree ornaments ·
By: Wood4turning
December 22, 2012 · 644 views

Lathe turned wood ornaments

 

Woodturning A Faux Inside Out Christmas Bell Ornament ·
By: As Wood Turns
December 21, 2012 · 4,351 views

http://www.AsWoodTurns.com This woodturning is made of maple poplar about 4' tall and 2' in diameter. The poplar bell is finished with acrylic paint for an antique look. The maple finial is finished with shellac. The ornament has a handmade brass hanger. Instead of being turned inside out, the center shape was drilled out with forstner bits. Small bits marked the top and bottom corners. Larger bits bored out the center of the bell. After mounting the ornament on the lathe, the bottom was also bored out with a forstner bit. Then the outer shape was turned. With the void in the middle, each stok

 

Turning snowman lathe ·
By: Wood4turning
December 16, 2012 · 641 views

Snowmen

 

Turned orniments ·
By: Wood4turning
December 16, 2012 · 350 views

Wooden turned christmas tree ornament

 

Woodturning A Christmas Tree Ornament ·
By: As Wood Turns
December 14, 2012 · 6,587 views

http://www.AsWoodTurns.com This woodturning is made of apricot about 5' tall and 1 1/2' in diameter. The tree branches are painted with acryllic paint. The entire tree is finished with lacquer. The ornament has a handmade brass hanger. The branches were turned off axis. Three additional centers were marked on the base at 60 degree angles and about 3/8' from the true center. The turning axis was shifted to the first off center axis to turn a groove at every third mark along the tree. Then the turning axis was shifted to the second off center axis to turn a groove at every third mark along the t

 

Christmas Snowman Family - Sean Dunphy ·
By: As Wood Turns
December 14, 2012 · 2,652 views

Sean Dunphy woodturns a Christmas snowman family and recounts an injury he suffered while working at his lathe. This is Sean's entry to the Christmas Ornament Woodturning Challenge. The complete playlist is at http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom&feature view_all More at http://www.AsWoodTurns.com

 

Woodturning ·
By: Wood4turning
December 10, 2012 · 114 views

Orniments

 

Woodturning Christmas Ornament: Enhancing Poplar and Maple ·
By: As Wood Turns
December 08, 2012 · 11,760 views

http://www.aswoodturns.com This woodturning is made of poplar and maple. The body is 2' poplar dyed red and finished with lacquer. The finials are maple finished with friction polish. Inside the ornament body is a cute little Christmas tree. The ornament has a handmade brass hanger. The interior of the body was drilled with a 1 1/8' forstner bit then sanded. The dye was applied with a mouth atomizer. This ornament is part of the Christmas Ornament Woodturning Challenge 2012. Please view the playlist at http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom. Carl Jacobson and I are sponsoring this challenge. If you would like to enter an ornament in this challenge, video yourself making the ornament, upload it to YouTube, and let me know where the video is. I'll then add it to the challenge playlist. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Christmas Ornament Woodturning Challenge - Dave Farrell ·
By: As Wood Turns
December 08, 2012 · 1,455 views

Entry in Christmas Ornament Woodturning Challenge - An army of snowmen - by Dave Farrell

 

Woodturning Christmas Ornaments: Icicles From Exotic Woods ·
By: As Wood Turns
December 02, 2012 · 4,221 views

http://www.aswoodturns.com This woodturning is a set of three exotic wood icicles ranging from 3 inches to 4 1/2 inches in length. Each as a finial at the bottom and a series of other shapes above the finial. They are strung on nylon thread and have a handmade brass hanger. Each as a variety of woods that I purchased at a black Friday sale. The store did not identify the woods but they have a nice color and density. I challenged myself to turn this entire project with a skew. The small scale of this project was a challenge. The 1/16' drill bit was prone to wander off center which resulted in

 

Woodturning snowmen ·
By: Wood4turning
December 02, 2012 · 681 views

Hollowing snowmen

 

wood turning acorns and onrnaments ·
By: Wood4turning
December 02, 2012 · 2,096 views

woodturnings

 

DSSCF5370.AVI Painted Snow Man ·
By: Desmond Shore
December 02, 2012 · 69 views

Made out of wood

 

DSCF5369.AVI Snow Man ·
By: Desmond Shore
December 02, 2012 · 106 views

Snow man made on the lathe.

 

Woodturning Christmas Ornament ·
By: Carl Jacobson
December 01, 2012 · 21,596 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 This is a Christmas Ornament I turned out of Myrtlewood and purple heart. http://www.ebay.com/itm/Wood-Lathe-Steady-Rest-fits-Jet-Delta-Rikon-Grizzly-General-Shop-Fox-/251140298441?pt LH_DefaultDomain_0&hash item3a7920d6c9 - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Turning christmas ornaments ·
By: Wood4turning
December 01, 2012 · 300 views

Wood turning

 

Turned on lathe ornaments ·
By: Wood4turning
November 30, 2012 · 136 views

Carman from south park and mr hanky

 

Turning snowmen and family next to christmass tree ·
By: Wood4turning
November 30, 2012 · 279 views

Wood turning

 

Turning snowmen ·
By: Wood4turning
November 28, 2012 · 543 views

Turning

 

Woodturning Christmas Ornament - Deep Space Nine in Walnut and Maple ·
By: As Wood Turns
November 23, 2012 · 4,031 views

http://www.aswoodturns.com This woodturning resembles the space station on Star Trek - Deep Space Nine. It has a wide, round main section with corridors back to the central hub. The top and bottom finials house docking bays and equipment not subject to gravity. Each is about 7' tall and 3' in diameter. It is about 7' tall and about 3' in diameter. The body is Walnut with Maple Finials. The body is inlaid with brass wire to resemble portholes. It is finished with a friction polish. The walnut body is drilled out to form spokes from the central core to the space station's outer ring. I picked up

 

Christmas Ornament Woodturning Challenge - Miguel Sanchez ·
By: As Wood Turns
November 23, 2012 · 1,853 views

A snowman with hidden boxes for the Christmas Ornament Woodturning Challenge. Entered by Miguel Sanchez

 

Woodturning Christmas Ornament - Sea Urchin On Apricot ·
By: As Wood Turns
November 18, 2012 · 3,207 views

http://www.aswoodturns.com This woodturning has a sea urchin shell on an apricot top and bottom finial. It is about 8 1/2' tall. The shell is about 2' in diameter. The apricot from urban forestry is finished with a friction polish. The sea urchin shell is protected by three coats of white glue on its inside. I sanded the top and bottom shell holes to make them uniform. Although I prefer finials with a fine point, I worried about grandchildren playing (inappropriately) with it. WIth this risk in mind, I made the finial points into moderate beads instead. The most difficult part is to fit the sh

 

Wood Turning - A Christmas Cracker! ·
By: Mike Waldt
November 12, 2012 · 6,940 views

I turn a Christmas Cracker.....for Christmas! For my friends in far off places, a link to the origins of Christmas Crackers :) http://en.wikipedia.org/wiki/Christmas_cracker

 

Tournage sur bois, déco de Noël N°1 Woodturning, decorative Christmas No. 1 ·
By: Laurent Cortot
November 12, 2012 · 51,396 views

Un photophore champignon :) Mon blog: http://lolotourneur.blogspot.com

 

WGNC Demo: Alan Leland hollow ornaments ·
By: weekendturner.com
November 12, 2012 · 51,315 views

WoodturnersGuild.com member and professional woodturner Alan Leland demonstrates his hollow-globe ornaments with extra-thin finials at the Nov. 8 meeting in the NC State Craft Center.

 

Woodturning A Christmas Ornament With Bronze Wire Inlay ·
By: As Wood Turns
November 09, 2012 · 8,445 views

http://www.aswoodturns.com This woodturning is a bronze wire inlaid Christmas ornament made of aspen and walnut finished with shellac. The body is a near sphere about 2 1/4' in diameter. It is solid - not hollowed out except for a 1/2' hole thru the center. It weighs in at about one ounce. The turning blank is salvaged from an offcut from a green turned bowl. The finials are also salvaged walnut from another bowl. I was fortunate to find a piece with the grain running along its length for the finial. The bottom of each finial has a 1/2' tenon and a 45 degree chamfer. These mate to correspondin

 

Woodturning A Christmas Bell Ornament Inside Out ·
By: As Wood Turns
November 02, 2012 · 40,652 views

http://www.aswoodturns.com This woodturning is a Christmas bell turned inside out. It proved to be a challenge to both visualize and to execute. It's made of apricot finished with shellac. An inside out turning is assembled from strips of wood. These are temporarily glued together and turned to form the inner shape and finished. Then the strips are separated, rotated, and glued back together making an inner void. Then the outer shape is turned. This bell is part of the Christmas Ornament Woodturning Challenge 2012. Please view the playlist at http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom. Carl Jacobson and I are sponsoring this challenge. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Woodturning Snowman Christmas Ornament ·
By: Carl Jacobson
October 23, 2012 · 26,990 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. I turned a Red Cedar snowman on the lathe. Ornament Challenge. URL (http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom ) or a shortened one ( http://bit.ly/SeDFer ) - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Christmas Ornament Woodturning Challenge 2012 ·
By: As Wood Turns
October 23, 2012 · 2,731 views

http://www.AsWoodTurns.com We challenge all woodturners to turn a Christmas ornament and shoot a video of them turning it. Upload it & we'll put it in the Christmas Ornament Woodturning Challenge 2012 playlist on YouTube. Afterwards, use the ornament to enhance the true spirit of Christmas. Deadline Santa's departure for his rounds. Playlist URL: http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom

 

NEFWA October 2012 -Thornhill Christmas Ornament ·
By: North East Florida Woodturners Association
October 23, 2012 · 735 views

Thonrhill Christmas Ornament Demonstration of turning a Thiornhill Christmas Ornament by Ed Malesky at the October 2012 meeting of the Northeast Florida Woodturners Association.

 

NEFWA October 2012 - Five Piece Ornament ·
By: North East Florida Woodturners Association
October 23, 2012 · 565 views

Five Piece Christmas ornament Demonstration of turning a Five Piece Christmas Ornament by Ed Malesky at the October 2012 meeting of the Northeast Florida Woodturners Association..

 

Turning Halloween Ornaments with David Best (woodturning dvd preview) ·
By: Craft Supplies USA
October 22, 2012 · 3,627 views

Learn how to turn six fun and unique Halloween ornaments using David Best's best tips and tricks. Buy now: https://www.woodturnerscatalog.com/p/99/5668/Best-Productions-Turning-Halloween-Ornaments-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The DVD explains how to make a custom table saw jig, gluing segments, turning, texturing, and finishing. 255 minutes. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and supplies in the industry. Turning

 

NEFWA October 2012 - Acorn Christmas Ornament ·
By: North East Florida Woodturners Association
October 21, 2012 · 2,971 views

Acorn Christmas Ornament Demonstration of turning an Acorn Christmas Ornament by Ed Malesky at the October 2012 meeting of the Northeast Florida Woodturners Association.

 

Woodturning A Snowman Ornament Dressed For Christmas ·
By: As Wood Turns
October 20, 2012 · 14,309 views

http://www.aswoodturns.com This woodturning is a nice snowman dressed for the winter season. He's made of hard maple with a walnut hat and yarn scarf. His belt is a burn. Overall, he's coated in mineral oil and beeswax. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready. This is my first submission to the challenge: 'Christmas Ornament Woodturing Challenge 2012' sponsored by Carl Jacobson and myself (Alan Stratton). The playlist is at http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom

 

2012-07-07 Christmas in July by Dan Douthart (1h28m37s) ·
By: Gwinnett Woodworkers
October 12, 2012 · 16,925 views

GWA Class 07-07-12 GWA member Dan Douthart demonstrates a method of turning small ornaments without hollowing the center using a pen-turning mandrel with shop-made spacers. Using this method allows for several ornaments to be turned at the same time. He finishes up by turning finials using a different approach, beginning with the base first while both ends are supported. Full Video (1:28:37) Filmed and uploaded in HD.

 

Hand turned finial (Christmas ornament) ·
By: WYOMINGWOODTURNER
August 28, 2012 · 27,645 views

Sam Completes his Christmas ornament by turning a holly finial. He shows details in how to turn and chuck the finial with pin jaws. Remember there is a video showing the process of making a Christmas ornament. The two videos go hand-in-hand.

 

Hand-turned Christmas Ornament ·
By: WYOMINGWOODTURNER
August 28, 2012 · 23,523 views

Sam Angelo takes you through the steps in making a Christmas Ornament. He will turn the top of the ornament as well as hollow out the body of the piece. Included will be his methods for chucking and tools used. Sam will upload another video on turning the Finial.

 

2012-06-14 Turning Pens & Ornaments by R. Austin & J. Stripling (1h36m) ·
By: Gwinnett Woodworkers
August 18, 2012 · 2,848 views

GWA Turning SIG Class 06-14-12 This GWA Turning Special Interest Group class features Rob Austin who shows his method of turning pens and applying a CA finish. The class continues with Jimmy Stripling demonstrating his method of turning Christmas ornaments (he donated several to the Inverted Christmas Tree charity fundraiser last year). Full Video (1:36:13) Filmed and uploaded in HD.

 

Woodturning A Sea Urchin Ornament #2 ·
By: As Wood Turns
July 19, 2012 · 7,209 views

http://www.aswoodturns.com This woodturning project is the second in a response to a challenge by Cascade Woodturners to make 'something' from a juniper block. I had made one already but decided to make a second sputnik sea urchin ornament. It has a sea urchin shell with juniper finials above and below the shell. The lower juniper finial is also a pedestal for the ornament. It chould be a Christmas ornament or a decorative ornament. To prepare for the first sea urchin, I reviewed two videos by Cindy Drozda who makes beautiful turned wood finials. I also practiced on two small ones before the real thing. In the end, the finials turned out well. At the end of the video, I compare these two ornaments to decide what direction to take for the next set. This one is a keeper. I'll show off both these wood turned ornament at Cascade Woodturners shortly. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Woodturning A Sea Urchin Ornament ·
By: As Wood Turns
July 14, 2012 · 11,703 views

http://www.aswoodturns.com This woodturning project is a response to a challenge issued by Cascade Woodturners to make 'something' from a juniper block, I decided to make a sea urchin ornament with a sea urchin shell with juniper finials above and below the shell. To prepare, I reviewed two videos by Cindy Drozda who makes beautiful turned wood finials. In the end, the finials went fairly well. I practiced on two small ones before the real thing. This one is a keeper. I'll show off this wood turned ornament at Cascade Woodturners shortly. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Figured maple ornaments inside out woodturning projects ·
By: 207 Made
April 08, 2012 · 5,487 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

10-22-11 Turning Christmas Ornaments by Dan Douthart (01h06m) ·
By: Gwinnett Woodworkers
February 05, 2012 · 7,040 views

Original Class Date 10-22-11 GWA Member Dan Douthart demonstrates the creation of turned Christmas ornaments using 'Toothpick Technology' developed by Mark Silay on the Lathe. Full Video (1:06) Filmed and uploaded in HD.

 

Woodturning,Turned Christmas Ornament ·
By: Carl Jacobson
December 23, 2011 · 34,858 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. I turned a Christmas ornament out of Myrtle wood,Walnut and purple heart. These make great gifts and are fun to turn. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Making Christmas Tree Ornaments ·
By: Lamar Sineath
December 13, 2011 · 1,797 views

We made Christmas ornaments from a piece of split two by four. A wood snowman and some christmas trees. Special thanks to Brian Havens for showing me this.

 

Urchin Ornaments ·
By: Brian Havens
December 11, 2011 · 19,107 views

Just in time, while there is still a little time left before Christmas, here is a more advanced holiday project, as opposed to the colored Christmas ornament I demonstrated in my last Workshop Update. This is also a sort of a format pilot for a series of videos I am thinking of doing, after the new year, called 'At the Lathe', which would feature Woodturning techniques and information, everything from how to prepare and use a skew chisel, to how to utilized certain parts of a tree for the right kind of turning. Enjoy! P.S. If you cannot procure urchin shells in time for Christmas, you can always hollow out a wood globe to replace it. Burls would be nice for that.

 

2011 GWA Upside Down Christmas Tree Project (6m22s) ·
By: Gwinnett Woodworkers
November 06, 2011 · 5,571 views

Original Date 10-22-11 For 2011 the GWA in partnership with our host Peachtree Woodworking combined efforts to produce over 200 hand-made wooden ornaments for an Upside-Down Christmas tree, to be auctioned to benefit Children's Healthcare of Atlanta in a special Holiday Auction. This slideshow offers both detailed images of the ornaments and the tree being dressed in its Christmas finery. More info about the auction on ptreeusa.com Music: 'The Christmas Waltz' by Nancy Wilson 'The Nutcracker Suite' by Les Brown & His Band of Renown from the Ultra-Lounge Christmas Cocktails Full Video (6:22) Filmed and uploaded in HD.

 

Christmas ornament globe and assembly ·
By: Bob Hamilton
October 30, 2011 · 10,183 views

This video shows me turning a basic globe type Christmas ornament and assembling the pendant and hanger piece to it at the end.

 

Christmas ornament pendant ·
By: Bob Hamilton
October 30, 2011 · 3,864 views

This video shows me turning a walnut pendant and hanger piece for a globe type Christmas ornament. If you have already viewed my other Christmas ornament series you will find that this pendant is pretty much the same and is turned using the same techniques, so you can skip right to the globe part of the ornament if you like.

 

Christmas Tree Topper ·
By: woodturningwithtim1
October 15, 2011 · 8,887 views

Tim Yoder shows you how to turn your very own Christmas Tree topper. But not only is it a topper...it's 3 projects all rolled in to one! This new DVD is available now on his website www.woodturningwithtim.com

 

Wood Turning Project Christmas Ornament for Chad's Charity ·
By: Carl Jacobson
September 21, 2011 · 70,055 views

Purple Heart and sycamore Christmas Ornament. I made this for Chad's charity project. I finished it with Deft Semi-Gloss wood finish. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, an

 

Woodturning Christmas Ornaments with Rex and Kip - Vol 6 (woodturning DVD preview) ·
By: Craft Supplies USA
August 31, 2011 · 9,838 views

Watch a short preview of Rex and Kips new DVD 'Woodturning Christmas Ornaments ft. Dale Nish'. Buy now: https://www.woodturnerscatalog.com/p/99/5610/Learning-Turning-Woodturning-Christmas-Ornaments-Volume-6-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA In volume 6 of their Woodturning Projects video series, Rex Burningham and Kip Christensen team up with Dale Nish to give detailed instruction on how to turn four Christmas ornaments and an ornament stand. •Detailed instructions step-by-ste

 

Woodturning Christmas Ornaments with Rex and Kip - Vol 5 (woodturning DVD preview) ·
By: Craft Supplies USA
August 31, 2011 · 7,661 views

Watch a short preview of Rex and Kips new DVD 'Woodturning Christmas Ornaments ft. Dick Sing'. Buy now: https://www.woodturnerscatalog.com/p/78/4739/Learning-Turning-Woodturning-Christmas-Ornaments-Volume-5-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA In volume 5 of their Woodturning Projects video series, Rex Burningham and Kip Christensen team up with Dick Sing to give detailed instruction on how to turn three Christmas ornaments and an ornament stand. •Detailed instructions step-by-st

 

Woodturning Projects Last of 2010 Christmas Ornament ·
By: Carl Jacobson
December 23, 2010 · 15,580 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. More Christmas Ornaments on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

CHRISTMAS TREE ORNAMENT: Woodturning ·
By: WYOMINGWOODTURNER
December 19, 2010 · 29,319 views

PAINTED CHRITMAS ORNAMENT TURNED BY SAM ANGELO: WYOMINGWOODTURNER.COM

 

Woodturning Projects Small Christmas Ornament ·
By: Carl Jacobson
December 03, 2010 · 9,134 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. Woodturning Projects Small Christmas Ornament - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning Projects Redwood Christmas Ornament ·
By: Carl Jacobson
November 18, 2010 · 11,861 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. Turning a Christmas ornament on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

5 Minute Christmas ornament on the lathe ·
By: Carl Jacobson
November 10, 2010 · 57,709 views

Christmas ornament on the lathe. I turned a Christmas light, tree,and a snowman. This is a easy project, and make great little extras on a gift box. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Sche

 

Woodturning Projects Christmas Ornament ·
By: Carl Jacobson
November 05, 2010 · 12,247 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. Turning a Ornament on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning Projects Christmas Ornament ·
By: Carl Jacobson
October 30, 2010 · 48,496 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Turning a Christmas ornament on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning Taxus Ornamental turning.(5) Piezas con rose engine 002 ·
By: TaxusWoodturning
November 03, 2009 · 3,048 views

 

Woodturning Taxus Ornamental turning (2) Máquina de rosetas.Rose engine. ·
By: TaxusWoodturning
November 02, 2009 · 4,940 views

 

Hollowing Christmas Ornament Globes the Easy Way ·
By: Ron Brown
September 27, 2009 · 26,423 views

Hollow through a 1-1/4' hole then make it dissappear so that even your Momma can't find it! This is a tease - there is no audio. Full instructions can be found on a double DVD set 'Fancy Christmas Ornaments the Easy Way with Ron Brown'. More info at www.coolhammers.com

 

Christmas Ornaments YouTube Short Preview ·
By: Ron Brown
June 21, 2009 · 10,057 views

 

Ornament Assembly ·
By: Bob Hamilton
April 06, 2009 · 5,111 views

This is the Ornament assembly section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Body Segment 4 ·
By: Bob Hamilton
April 06, 2009 · 10,255 views

This is Segment 4 of 4 of the Ornament Body section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Body Segment 3 ·
By: Bob Hamilton
April 06, 2009 · 6,660 views

This is Segment 3 of 4 of the Ornament Body section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Body Segment 2 ·
By: Bob Hamilton
April 06, 2009 · 5,825 views

This is Segment 2 of 4 of the Ornament Body section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Body Segment 1 ·
By: Bob Hamilton
April 06, 2009 · 8,886 views

This is Segment 1 of 4 of the Ornament Body section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Centerpiece Segment 3 ·
By: Bob Hamilton
April 06, 2009 · 2,976 views

This is Segment 3 of 3 of the Centerpiece section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Centerpiece Segment 2 ·
By: Bob Hamilton
April 06, 2009 · 2,795 views

This is Segment 2 of 3 of the Centerpiece section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Centerpiece Segment 1 ·
By: Bob Hamilton
April 06, 2009 · 3,377 views

This is Segment 1 of 3 of the Centerpiece section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Pendant Segment 4 ·
By: Bob Hamilton
April 06, 2009 · 3,986 views

This is Segment 4 of 4 of the Pendant section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Pendant Segment 3 ·
By: Bob Hamilton
April 06, 2009 · 4,791 views

This is Segment 3 of 4 of the Pendant section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Pendant Segment 2 ·
By: Bob Hamilton
April 06, 2009 · 4,629 views

This is Segment 2 of 4 of the Pendant section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Pendant Segment 1 ·
By: Bob Hamilton
April 06, 2009 · 8,089 views

This is Segment 1 of 4 of the Pendant section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Birdhouse Ornament Tip 101 ·
By: WoodenNicol
April 01, 2009 · 3,081 views

Putting the finishing touches on a turned birdhouse ornament

 

Christmas Tree Ornament.m4v ·
By: Sam Pane
December 14, 2008 · 19,879 views

This movie shows how I made a Christmas Tree Ornament using a wood lathe. I used Kingwood for the body and Birdseye Maple for the cap and finial.

 

Dave's Lathe Vol.6.wmv ·
By: David Clevenger
November 10, 2008 · 2,915 views

Turned Christmas Tree Ornaments

 

Icicle Christmas Ornament -Drilling and Hanging ·
By: Darrell Feltmate
November 15, 2007 · 8,367 views

Wood turning an icicle for the Christmas tree. Drilling the head and getting it ready to hang. from http://aroundthewoods.com

 

Icicle Christmas Ornament - the Head ·
By: Darrell Feltmate
November 13, 2007 · 37,239 views

Wood turning an icicle for the Christmas tree. Shaping the head. from http://aroundthewoods.com

 

Icicle Christmas Ornament - Mounting and Roughing ·
By: Darrell Feltmate
November 12, 2007 · 8,885 views

Wood turning an icicle for the Christmas tree. Shaping the body. from http://aroundthewoods.com

 

Icicle Christmas Ornament - Shaping ·
By: Darrell Feltmate
November 12, 2007 · 9,857 views

wood turning an icicle for the Christmas tree. Shaping the body. from http://aroundthewoods.com

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Artisan Ideas
Stainless Steel Bottle Stoppers
Woodturning with Tim

(Click any Ad to go to our Sponsor's Website)