Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Plates and Platters Videos (437)

Sort by

Or click here to: Search All Videos


Maple Bowl - Platter
By: madronawoodworks
November 29, 2018 · 1,505 views

Just an ordinary soft maple, existing edge piece of wood. I debated whether to turn it round or leave the four irregular corners, and opted for the corners. Please Like, Share and Subscribe if you are so inclined. Shop Page: https://www.facebook.com/Phils-Woodshop-1470648929819551/ For YouTube Only: Square Corner Bowl, Platter, Wood Lathe, Woodturning, Bowl Shapes, Platter Shapes, Jet Lathe 1840, Shellac Finish, Bowl Design, Platter Design, Phil Anderson Woodturner, Shady Acres Woodshop, Wood Shop, Phil's Wood Shop, Phil's Woodshop, Turning Ideas, How To Turn A Bowl, How To Turn A Platter

 

Jimmy Clewes Turning a Platter with the Laguna Revo 2436
By: jimmy clewes
November 27, 2018 · 606 views

 

Santa's Cookie Plate
By: Don Kleinschnitz Jr.
November 25, 2018 · 77 views

This special plate was made for grand kids to leave cookies for Santa, and maybe a carot or two for Rudoff.

 

Woodturning - Chip and Dip Platter (And trying a new finish!)
By: Woodturner Ky
November 24, 2018 · 3,019 views

After being out of the shop for over 3 months, I'm back! To get back in the groove I decided to keep it simple with this Chip and Dip platter. Made from American Elm, and finished with 'Odie's Oil', I'm happy with the result. Heck after not turning for 3 months, I'm just happy I got it off the lathe in one piece! Previous Video's: Green Turning Butternut (And Tips for New Turners!) https://www.youtube.com/watch?v kgPnsO-PyzE Sharpening 3 Different Gouges (Swept Back, 40/40, Spindle) https://www.youtube.com/watch?v WP3fu2-poI0 Dinosaur Eggs (Diseased Chokecherry) https://www.youtube.com/watch?v xWz8r48JUw8

 

HOW I TURNED A MAHOGANY KITCHEN WORKTOP INTO A PLATTER WITH PHOTO INSERT
By: DAVE THE WALSALL WOODTURNER
November 18, 2018 · 97 views

mahogany kitchen worktop into a platter with photo insert

 

Wood Turning Club - Remembrance Day Platter
By: caitlan the cat
November 11, 2018 · 830 views

As it is remembrance day today I decided to make something with a poppy on it. Using the stained glass effect I used last week I made this platter with a design showing 3 poppies and a soldier on it. I turned a piece of Oak with a flat front then created the design using rainbow stains. Then using acrylic gloss finish and buffing up the piece to look like glass.

 

English Elm Platter
By: Nick Burt Woodturning
November 11, 2018 · 9 views

My method of producing a quality English Elm Platter

 

Wood Turning Club - Stained Glass Window Effect on a Platter
By: caitlan the cat
November 04, 2018 · 1,814 views

At Wood Turning Club this week I wanted to try to make a platter with a Stained Glass Windows effect. I turned a piece of mahogany into the right shape with the front being completely flat. Then using masking tape created the design I wanted. Using Rainbow Wood Stains to colour the segments, giving the piece an acrylic gloss finish buffed up to look just like glass.

 

Wood turning-Jack Skeleton Plate
By: The Pohl Barn Projects
October 26, 2018 · 2,709 views

I Love HALLOWEEN ! Had Maple and Resin, I had fun making this and I hope you enjoy it. I use Resin4art in this project along with Black Alumilite Die usic https://www.youtube.com/watch?v 1SPhlgVKGEw resin I use www.alumilite.com Yorkshire Grit and Hampshire Sheen http://www.thewalnutlog.com/ My Facebook Page https://www.facebook.com/Pohl-Barn-Productions-212157042680083/ our Etsy Page https://www.etsy.com/shop/PohlBarnProductions?ref search_shop_redirect The new lathe Nova Galaxi DVR 1644 Where I get my lumber, materials and tools. The Workbench and or LL Johnson's Lumber http://w

 

Woodturning Finishing Mango and Sanding Supplies
By: Woodturning Arts
October 20, 2018 · 1,116 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line to: rick@woodturningarts.com 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Ite

 

#90 Rusty Elm Burr (Burl) Platter Woodturning
By: M. Saban Smith Woodturning
October 13, 2018 · 5,776 views

In this weeks project, I put my neck on the line again with what could be a controversial piece - an Elm Burr Platter with the top rim mostly covered with rusty paint! The piece has turned out exceptionally well in my opinion and I love how the paints have turned complementary colours to the natural colour of the wood, and the texture the paint gives is a lovely contrast to the smoothness of where the piece was sanded. The piece is 17.5' in diameter and was turned with nothing more than a Robert Sorby 1/2' Excelsior Bowl Gouge and an Axminster 3/8' bowl gouge. Here are the other bits used:

 

Woodturning - Simple but effective square platter segmenting
By: CraftWithAfshin
October 12, 2018 · 1,832 views

Hi everyone today i have a american walnut square blank and ive made 4 45degree cut on the edges and glued 4 strips of Ash 5mm thick its simple but effective i like to keep it simple and show the natural beauty of the wood as much as i can, I'd love to know what you think, be good and take care of each other cheers.

 

Finishing a Large Walnut Burl Platter Part III
By: Woodturning Arts
October 08, 2018 · 1,737 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line to: rick@woodturningarts.com 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Ite

 

Finishing a Large Walnut Burl Platter Part II
By: Woodturning Arts
October 07, 2018 · 912 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line to: rick@woodturningarts.com 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Ite

 

Finishing a Large Walnut Burl Platter
By: Woodturning Arts
October 06, 2018 · 1,422 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line to: rick@woodturningarts.com 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Ite

 

Будет тарелка (There's a bowl of)
By: Аleksey Bek
October 05, 2018 · 283 views

В этом видео делаем заготовку для тарелки. In this video we make a blank for the plate.

 

Purpleheart Platter
By: Erik Anderson
October 03, 2018 · 2,506 views

I turn a Purpleheart Platter with texturing and a Yorkshire Grit finish - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

Platter With Yorkshire Grit Review
By: madronawoodworks
September 27, 2018 · 3,287 views

Maple Platter with my impressions using Yorkshire Grit for the first time. You can obtain Yorkshire Grit here: UK Site: http://yorkshire-grit.com/uk-purchases-only/ US Site: http://www.thewalnutlog.com/yorkshire-3/ My Shop Page: https://www.facebook.com/Phils-Woodshop-1470648929819551/ For YouTube Only: How To Turn A Wood Platter, Wood Platter Ideas, Wood Lathe Turning, Jet Lathe 1840, Shady Acres Wood Shop, Woodshop, Phil's Woodshop, Phil Anderson Woodturner, Platter Shapes and Design, Maple Platter, Yorkshire Grit Review,

 

Woodturning and curve an oak platter !
By: Kostas Annikas Deftereos
September 15, 2018 · 2,798 views

Today i make a plate from oak wood and i curve some holes with the rotary tool ! i have try this technique before but not in a plate and this is looks so nice ! i hope you find interesting this technique ! we will speak again next Sunday! check the video that gives me the idea to try it on a plate and subscribe to my friend Rob he is a great woodturner ! https://youtu.be/eeJ7KdRnDGk

 

Supporto per piatto - Platter stand
By: Mauro il tornitore
September 14, 2018 · 181 views

Questo video descrive come ho realizzato un supporto al tornio per i piatti che sembrano intrecciati con vimini del mio ultimo video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro This video describes how I made on the lathe a stand for the basket illusion platters of my last video. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro

 

Poplar Utility Dinner Plate For Club Challenge
By: As Wood Turns
September 14, 2018 · 1,607 views

http://www.AsWoodTurns.com I turned this dinner plate for our club challenge. Although I thought I had selected rough sawn red oak, it is actually poplar when smoothed out. My eight inch plate is finished with walnut oil so that it could be used for food. Walnut oil can also be renewed easily after use. I did my best to make a smooth bottom and a minimal mounting mortise. I do not appreciate turnings with a deep mortise on the bottom. To me, they seem heavy and clunky since the wall thickness is excessive. Enjoy! Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used with permission.

 

Woodturning - The Emerging Man
By: Andy Phillip
September 14, 2018 · 114,280 views

Turning a bowl/platter from a gnarly slice of Horse Chestnut burl ..I was really close to giving up with this piece it had voids which I filled with epoxy and antique gold pearl ex and some real punky wood which I soaked in ca glue to try and stop it disintegrating ..It may still be a little punky but the emerging figure that's trying to get out of the bowl makes me glad I persevered with it .. my etsy & Instagram links https://www.etsy.com/uk/shop/AndyPhillipHandmade? https://www.instagram.com/andyphillip67/ Where I buy my resin products http://www.houseofresin.co.uk

 

Woodturning a Platter from Huon Pine - Conrad P. Woodturning
By: Conrad P. Woodturning
September 14, 2018 · 148 views

In this video I turn a platter out of a piece of Huon Pine, which was given to me as a gift from my Dad. Huon Pine is an Australian native softwood, that is found throughout Tasmania. The timber is becoming increasingly rare, as cutting down Huon Pine trees has been banned by the government. The timber is highly sought after due to its attractive, tight and sometimes wavy grain. Huon Pine is a lovely timber to work with, and produces a very distinct aroma when turning (making it one of my favourite timbers to turn!). If you enjoyed this video, please considering giving it a like, and commentin

 

Elm Platter
By: Nick Burt Woodturning
September 12, 2018 · 49 views

My method of producing a quality English Elm Platter

 

Nr. 32 (Teil2/2): versporte Birkenholzschale kalken, ölen
By: Drexeln
September 09, 2018 · 53 views

weitere Informationen unter: https://www.drexeln.de/schaubar

 

Woodturning an Exotic Wood Platter
By: R Humphrey
September 07, 2018 · 21,707 views

Colorful square woodturning! In this week’s video, I use five different naturally colored woods from South and Central America. The wood is cut to size on the table saw, re-sawn for thickness on the band saw, and then laminated together before being mounted to the lathe. This video, and my channel is not just about wood turning, though that is a passion of mine. I want to show you more than that. The making, or building first, and then the shaping on the lathe. The woods used are: Jatoba, Yellowheart, Bloodwood, Padauk, and Purpleheart. Congrats to the winner of the Rosewood Bowl Giveawa

 

#89 Woodturning a Knotty Cedar of Lebanon Knotty Platter
By: M. Saban Smith Woodturning
September 05, 2018 · 5,353 views

It's fantastic to be behind the lathe again and woodturning a project for you to enjoy. This week on the lathe is an 18' Cedar of Lebanon platter which was finished on the back with my makers coin from Awesome Merchandise and a couple of coats of Hampshire Sheen Danish Oil. The front was turned thin and finished with a mix of Intrinsic Colours (Earth and Ruby) for a slighly reddy-brown colour. This was then coated with 2 coats of Danish Oil. I used a Robert Sorby half inch bowl gouge and a 3/8 bowl gouge for the whole thing, and sanding arbors from Simon Hope. *****************************

 

Live Oak Platter Woodturning - 136
By: Roweville Retro
September 01, 2018 · 71 views

This week I take a dry piece of live oak and make a platter. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Basket illusion platter - Piatto finto intreccio
By: Mauro il tornitore
August 31, 2018 · 235 views

Questo video mostra come ho realizzato un vaso che sembra intrecciato con vimini. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro This video shows how I made a basket illusion platter on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro

 

Woodturning Red Oak Crotch and a Find!
By: Woodturning Arts
August 31, 2018 · 775 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Item minimum 5 maximum 9) One su

 

Thick & Heavy Maple Platter / Bowl
By: Gord Rock
August 21, 2018 · 1,020 views

A bowl turned from a maple turning blank intentionally left thick and heavy. Colin Laughton's YouTube Channel: https://www.youtube.com/channel/UCBzIT4H3Mrk8eh527xCKu9g Mark Miller's YouTube Channel: https://www.youtube.com/channel/UCX0g9xPPXFC3ikWOxCJ86ag Rob Summerlin (Canadian distributor of Yorkshire Grit & Hampshire Sheen products) website: http://www.woodsleesummercraft.ca

 

Woodturned Platter Svarvat Fat #2 Woodturning
By: Elias Klingvall
August 17, 2018 · 3,723 views

Woodturned platter made of Ash with plugs of Walnut Svarvat fat av Ask med pluggar av Valnöt Gammelgarn Ängmans Snickeri Gotland

 

woodturning # 112 walnut live edge platter
By: Woodslee Summercraft
July 29, 2018 · 4,075 views

I purchased this slab of what i was told was oak, turned out to be walnut to my surprise with lovely figure, and some burl. i turned it into a 12 1/2' x 3' platter. finished with Yorkshire grit, Yorkshire grit microfine and Hampshire sheen microcrystalline wax for an ultra smooth lustrous finish. these products are available in Canada at my website here http://www.woodsleesummercraft.ca

 

Mountain Stream Platter Rim
By: Stewart Furini
July 28, 2018 · 1,232 views

Something a little more involved this time - lots of texturing and colouring on this rim with spirit stains, paint and wax. This was inspired by a couple of recent trips to Snowdonia, but I haven't got the colours right, so I'll probably be having another go. I also need to get the texture a bit finer, so that might mean buying some different cutters.....what a shame ;) Please leave a comment, subscribe and share! If you have any questions, ask away below! ..................................... Please be aware that woodturning is a hazardous activity. These videos are only intended to show

 

Woodturning - Oak Plate
By: AgainsTheGrain
July 26, 2018 · 59 views

This plate was turned very thin and will flex in the hand. I made this video from normal clips instead of time lapse so if you have been watching my other videos please let me know, which do you prefer to watch? I am also looking for artist who would be interested in having their music featured in future videos. If you think your music would go well with my videos, please contact me. If you like videos like this, Subscribe and stay tuned. Enjoy! Instagram: https://www.instagram.com/againsthegrainww/ Facebook: https://www.facebook.com/AgainsTheGrainWW/ Twitter: https://twitter.com/AgainsTheGrainW Website: https://www.againsthegrainww.com

 

Woodturning - Color Splash Oak Plate
By: AgainsTheGrain
July 19, 2018 · 71 views

Nothing crazy today just a plate I was asked to make for a friend. I did the staining away from the lathe and didn't have the GoPro recording but here's the rest. Quick project, short video... I am also looking for artist who would be interested in having their music featured in future videos. If you think your music would go well with my videos, please contact me. If you like videos like this, Subscribe and stay tuned. Enjoy! Instagram: https://www.instagram.com/againsthegrainww/ Facebook: https://www.facebook.com/AgainsTheGrainWW/ Twitter: https://twitter.com/AgainsTheGrainW Website: https://www.againsthegrainww.com

 

Austrian Pear Platter With Lichtenberg Figure Woodturning
By: Carl Jacobson
June 29, 2018 · 5,428 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII I made this platter for the Makers Make It Matter auction for cystic fibrosis fundraiser. The platter is Austrian pear wood. I used a Lichtenberg burner to create the lungs. Check out the link below to sign up for the auction. Makers Make It Matter https://templeboyturnings.com/index.php/curing-friends-campaign/ Andreas Achleitner https://www.youtube.com/watch?v _A53d--6ISo Lichtenberg burner http://www.conestogaworks.com/ I put together a list of some of t

 

Stencilled Platter Rim
By: Stewart Furini
June 24, 2018 · 1,066 views

In this video I have a go with a commercially available stencil with airbrushed spirit stains and a textured inner rim on a 12 inch beech blank which I make another platter from - how many platters does the world need! TBH I'm not sure about this one, so let me know what you think. Comments always welcome....and I'm getting close to 2000 subs so watch out for a giveaway if I get to 2K! Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials.

 

Woodturning - Large Scrap Wood Platter
By: Mike Waldt
June 19, 2018 · 9,889 views

I turn a 23' platter from old hardwood door frames and sills that I laminated together. Ray Zimmer - https://www.facebook.com/zimmerwoodturning/ Stewart Furini - https://www.youtube.com/channel/UCImOAiKvAcBdt8O02CdIpXg Simon Hope: http://www.hopewoodturning.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Easy Wood Tools: http://www.easywoodtools.com/ Easy Wood Tools at Amazon UK: https://www.amazon.co.uk/Easy-Wood-Tools-Chuck-M33-3-5/dp/B07664VKFB/ref lp_8318174031_1_13?srs 8318174031&ie UTF8&qid 1529428204&sr 8-13 UKIWS Facebook : https://www.facebook.com/ukiws/ Website: http://www.ukiws.co.uk

 

Woodturning Imperfection into Beauty
By: R Humphrey
June 08, 2018 · 531,563 views

Wood turning a Red Coolibah burl that has a split in the middle. It started rather ugly and turned out pretty! Imperfections can be beautiful. If you want to send me anything, my address is: Rod Humphrey PO Box 159 Chesterfield, IN 46017 e-mail: rhumphrey.woodworking@gmail.com

 

Raindrop Effect Platter - Update
By: William Hunt
June 07, 2018 · 1,324 views

I've been trying various method of emulating raindrops on the face of a platter, following suggested methodologies on YouTube and other sources. Progress has been limited and it seems the best results are obtained by using an airbrush. That’s probably my next stop.

 

Striped maple plate
By: The Pohl Barn Projects
June 01, 2018 · 5,062 views

My rendition of a piece done me Rod Humphrey, Maple and Chakte-coc finished with shine juice. I'm still learning at a slow pace, ride the bevel Doug ride the bevel ! gave up and went to carbide other than that I think it's ok, could of been out of one piece to eliminate a ugly seam, live and learn , Thanks again Rod for the Inspiration, Rods Channel for his original https://www.youtube.com/watch?v a3gmqnMDs_0 my Facebook page https://www.facebook.com/Pohl-Barn-Productions-212157042680083/ I am a beginner at wood turning, three months into learning , my methods may be wrong, since I

 

Woodturning at 54a #137 Magical Platter
By: Keith Barrow
May 30, 2018 · 3,118 views

A little Ash platter with pyrography.

 

Textured Iridescent Platter
By: Stewart Furini
May 24, 2018 · 1,702 views

Another go with Chestnut Products Iridescent Paints, perhaps a bit subtler than some other ways of using them. The platter rim was textured with a Robert Sorby texturing tool, then sealed and sprayed with ebonising lacquer before the iridescent paints were added. The rim was finished with Hycote acrylic lacquer and the middle of the platter with Chestnut Cut 'n' Polish. Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials.

 

woodturning: the mozzie repellent platter
By: Guil The Bearded Woodworker
May 20, 2018 · 288 views

the shop is full of mozzies so the best way to get ride of them is to turn a Camphor Laurel platter this wood is beautiful and also is quite smelly like vicks vaper rub on steroids. also if you turn camphor use the shavings as an insect deterrent on the garden is great mulch. FACEBOOK: https://www.facebook.com/beardedwoodworker/ SEND ME YOUR STICKERS, OR SEND ME A BLANK OR WHATEVER: 'Guil Noronha the bearded woodworker' po box 353 Maitland, NSW, Australia 2320

 

Cake Plate # 131
By: The Wood Whirler
May 19, 2018 · 1,690 views

Walnut and Hickory cake plate. You can put grapes on it too.

 

Sapele bowl/platter
By: Woodturning by Alan Scannell
May 17, 2018 · 52 views

A bowl/platter made from Sapele that was in my parents garden for many years. the figure and grain came up beautifully on this. There is no blooper at the end of the video...... OK there is :(

 

#87 'Turaco' Sycamore Wood Turned Off Centre Platter
By: M. Saban Smith Woodturning
May 16, 2018 · 4,315 views

It's been a while, but I'm back with a new woodturning project video. The project was turned over 2 days and was inspired by the colouring on a Purple-Crested Turaco I saw at a bird park near where I live the other day. Made from rippled sycamore wood, the piece was turned off centre to save as much of the ripple as possible, coloured with water based dyes from the Intrinsic Colour Collection: Forest Green, Straw and Plum, to as closely match the colouring on the bird as possible. I used HoldFast 3' and 6' vacuum chucks. Finished with Hampshire Sheen High Gloss and Original, the piece is 16

 

sunken cypress platter
By: Rons Woodturning shop
May 11, 2018 · 641 views

A large sinker cypress tree washed up on my friends property during the 2016 floods in Baton Rouge, He cut me a hunk of it and man it was fun to turn into a 13.5' platter

 

Ginormous Platter-Part 2
By: woodturningwithtim1
April 30, 2018 · 12,727 views

Creating a faceplate turning requires different skills and techniques than spindle turning, and when you super-size that turning (like on this BIG platter), you want to make sure all those skills and techniques are on the money. That's why we have Tim to learn from! Part 2 of 2 Marquetry: http://www.digitalwood.com/Beginner-Wood-Marquetry_c_1.html Cook Woods Teak: https://www.cookwoods.com/ You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

17 inch Walnut Platter Video
By: Erik Anderson
April 28, 2018 · 2,339 views

New 17' Walnut Platter - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

Woodturning - The Pippy Oak & Epoxy Platter
By: Andy Phillip
April 28, 2018 · 22,844 views

Turning a Platter from Pippy oak with a little help from some epoxy to fill the cracks & voids .. Sorry for the length of this video it ended up longer than I wanted .. Hope you don't get too bored !! Thanks for watching .. https://www.etsy.com/uk/shop/AndyPhillipHandmade https://www.instagram.com/andyphillip67

 

Woodturning a Satinwood and Wenge Platter
By: R Humphrey
April 27, 2018 · 98,586 views

Woodturning a Satinwood and Wenge Platter, and using a new (to me) finish. QUESTION? Is it Satinwood or is it Yellow Heart wood? My wood supplier labeled is the former, but I think it's Yellowheart...not certain though… Comments welcome! Thanks for watching! Make sure if you subscribe, to click on the bell so you’ll get notified of my new project uploads. More coming soon… I was given a sample to try for free with no strings attached, other than to give an honest opinion of the product. I like it.

 

Ginormous Platter-Part 1
By: woodturningwithtim1
April 26, 2018 · 18,173 views

Crea ting a faceplate turning requires different skills and techniques than spindle turning, and when you super-size that turning (like on this BIG platter), you want to make sure all those skills and techniques are on the money. That's why we have Tim to learn from! Part 1 of 2 Marquetry: http://www.digitalwood.com/Beginner-Wood-Marquetry_c_1.html Cook Woods Teak: https://www.cookwoods.com/ You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Planet Platter
By: Stewart Furini
April 21, 2018 · 1,233 views

Another in my series of coloured and textured platters - a planet with the swirl of space behind it. Colours are Chestnut Products spirit stains, black lacquer and Pebeo iridescent paint. Finished with Farecla compound, Turtlewax polish, Chestnut Cut 'n' Polish, Hycote lacquer and microcrystalline wax. Textured with Arbortech blades on Proxxon long-neck grinder and Sorby texturing tool. Birstall Woodturners: https://birstallwoodturners.wordpress.com/ Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials.

 

Woodturning: the spalted biscuit platter
By: Guil The Bearded Woodworker
April 12, 2018 · 851 views

well whilst cutting up some mahogany blanks this was one of the end off cuts that had some spalting in it so i wanted to see if i could get anything out of it. and i need some thing to put the biscuits on. FACEBOOK: https://www.facebook.com/beardedwoodworker/ SEND ME YOUR STICKERS, OR SEND ME A BLANK OR WHATEVER: 'Guil Noronha the bearded woodworker' po box 353 Maitland, NSW, Australia 2320

 

Turning A Star Platter
By: Colbe Pease Woodworking
April 11, 2018 · 278 views

In this video I make a plater with a star inlay design.

 

Birdseye Cherry Platter
By: madronawoodworks
March 30, 2018 · 4,886 views

I turn a beautiful platter from an old piece of wood picked up at a yard sale. No one is more surprised than me at what was in that piece of cherry. A challenging piece, due to the gaps in the piece, but turned out nice, nevertheless. Shop Page for More Projects: https://www.facebook.com/Phils-Woodshop-1470648929819551

 

Myrtlewood Platter / Woodturning
By: Carl Jacobson
March 30, 2018 · 12,041 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII I turned a Myrtlewood platter on the lathe. Dollar Shave Club helped sponsor this video, check them out at Dollarshaveclub.com/carljacobson Myrtlewood is a great wood to turn and it has some great color. I decorated the rim with a basket illusion pattern. TOOLS & SUPPLIES Lathe Robust http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ Thompson bowl gouge http://thompsonlathetools.com/ Banjo chuck mount: https://trentboschtools.com/ Faber

 

Red and Black Textured Platter Rim
By: Stewart Furini
March 24, 2018 · 1,332 views

Black and red - a classic combo! With texturing thrown in too! What's not to like? I hope this inspires some of you to try out some of the techniques. Be ware of the rim transition though....this needs some work still. Since shooting the video, I've tried out some ideas for improving the transition from the rim to the bowl - I've done a blog post about it here - https://www.stewartfuriniwoodturning.co.uk/blog Sticker links Yuval - https://www.youtube.com/user/yuvallahav Sean - https://www.youtube.com/channel/UCLePcIl_sTOhcqt2IP0x5NQ Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Making a Mahogany Platter!
By: Made by Brent
March 16, 2018 · 49 views

This platter is made from a piece of mahogany. It was really fun to turn. It is 12 inches in diameter. Please subscribe if you are new here and smash the like button! Please go follow me on facebook and instagram to see what I am working on! Facebook: https://www.facebook.com/Madebybrent/ Instagram: https://www.instagram.com/madebybrent/ Website: brentmichaelarnold.wordpress.com You can contact me at madebybrent@gmail.com Here are links to some of the products I use. If you buy any of them it will really help support my channel. Face shield I use: http://amzn.to/2HK8Hcb Dust mask: http://amzn.to/2pmM06U Camera: http://amzn.to/2pm44NN Tripod: http://amzn.to/2plx8G9

 

Plate from shoring
By: Peaceful Woodturner
March 02, 2018 · 195 views

This is a dish made from scrap from a water department project. It may be oak, but I really can't be sure. All I know (besides appearance) is it is pretty dense and heavy. All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so that you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey! Facebook: https://www.facebook.com/PeacefulWoodturner/ Twitter: @WoodturnerPeace

 

15' Decorated Birch Platter - Learn From My Mistakes!
By: madronawoodworks
February 28, 2018 · 2,934 views

I use Sorby spiraling/texturing tool to decorate the top and bottom of this platter. Color added with Tombow markers. Lots of 'Firsts' on this piece. Visit my Facebook Page for previous projects: https://www.facebook.com/Phils-Woodshop-1470648929819551/ Thanks for watching and please subscribe!

 

Cedar Platter
By: Erik Anderson
February 25, 2018 · 2,659 views

I turn a Cedar Platter some friends! - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

Iridescent platter
By: woodturningwithtim1
February 23, 2018 · 12,303 views

Inspired by Gary Lowes Cosmic Cloud platter Tim shows you a different way to apply the iridescent paints. He uses inexpensive foam brushes with beautiful results. Jo Sonja Iridescent Paints: http://josonja.com/index.php?page shop.product_details&flypage shop.flypage&product_id 490&category_id 42&option com_virtuemart&Itemid 88 Golden Airbrush Medium: https://www.amazon.com/Golden-Airbrush-Medium-16-Bottle/dp/B0027A5I6M Foam Brushes: https://www.amazon.com/Darice-1-Inch-Brush-Value-50-Piece/dp/B004GXBXGM/ref sr_1_8?s home-garden&ie UTF8&qid 1519433009&sr 1-8&keywords foam brushes bulk&dpID

 

Large platter turned from English Bur Chestnut
By: William Hunt
February 18, 2018 · 860 views

A large platter crafted from Bur Chestnut Platter. At 24'x18'3' it was a challenge to safely mount it on the lathe and the maximum safe revolutions was 300. The platter was finished in Hampshire Sheen High Gloss and the reverse with melamine lacquer. With more thanks to Mike Kennedy for providing the amazing wood https://www.facebook.com/twistedshank

 

Woodturning an Off-Centre poplar platter !
By: Kostas Annikas Deftereos
February 17, 2018 · 2,052 views

An off-centre video again of how i make a poplar platter ! There is unlimited ideas to work with Off-centre but first you need to be really careful for your safety and second you need to count everything carefully otherwise makeby you will have stability problems !!! Thank you very much for watching !! Have a great week !!!

 

wood turning herring bone platter
By: Guil The Bearded Woodworker
February 12, 2018 · 1,258 views

woods used: camphor laurel spotted gum red gum finished with: EEE ultra shine Cream shellawax Facebook: https://www.facebook.com/beardedwoodworker

 

Turned Plate with Off-Center Chuck with Sam Angelo wyomingwoodturner
By: WYOMINGWOODTURNER
February 09, 2018 · 4,097 views

Sam makes an off-center plate using Ron Brown's Off-center chuck. The wood is Chechen For more info on the chuck and turning a project off-center see the links below. Off center chuck video Link: https://tinyurl.com/ybzsr2yw Off-center chuck for sale: https://tinyurl.com/yd7gyjfw www.wyomingwoodturner.com

 

Маленькая тарелка из ясеня (A small plate )
By: Аleksey Bek
February 03, 2018 · 1,045 views

Из остатка материала решил выточить маленькую тарелочку. From the remaining material, I decided to carve a plate.

 

Ceder plate short
By: Rich McNatt
January 22, 2018 · 264 views

 

105 - Woodturning - Small Plate
By: Roweville Retro
January 21, 2018 · 42 views

In this video, I make a small dish / plate from a piece of poplar, and then I texture the rim. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Real time turning 10 ' Ceder Plate
By: Rich McNatt
January 20, 2018 · 676 views

This is 'Real time turning' I did add more finish after the video has stopped, No editing Mostly for beginner turners wondering why they can't turn a plate in 4 min., ike you see on videos. Enjoy!

 

Ancient Platter
By: Maple-Crossing Woodworks
January 20, 2018 · 460 views

A simple cherry platter finished with the Modern Masters Metal Effects copper paint. This was the first larger project I got to finish on my new Powermatic lathe. I hope you enjoy!

 

Torneado de un plato
By: JOSE ALBERTO GIORDANO
December 09, 2017 · 634 views

Plato en madera de Guayubira y terminación con cera de abeja.

 

Platter Turned From Scraps
By: Gord Rock
December 04, 2017 · 4,499 views

Turning a platter from scraps that have been in my shop for as much as 20 years or longer. It was time to clean them up!

 

Red Oak Platter # 105
By: The Wood Whirler
December 04, 2017 · 4,421 views

Large Red Oak Platter from a very large Red Oak tree.

 

Make playwood breakfast serving tray !
By: Kostas Annikas Deftereos
December 02, 2017 · 868 views

in this video i make a breakfast serving tray out of playwood !! is the most easier project that i have ever made !! i hope you find it intresting !! i also use my laser engarving machine !

 

Turning A Cracked Burl Platter
By: Colbe Pease Woodworking
November 29, 2017 · 1,345 views

In this video, I make a platter out of a piece of burl. I believe its Madrone. I used red dye to color It and black glue to fill the cracks

 

Turned Maple Platter / Woodturning Project
By: Carl Jacobson
November 24, 2017 · 14,129 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII In this video I turned a Maple platter on the lathe. Mark Baid gave me this piece when we were in California. Robin and I were on a 10 day road trip to california. I put together a slideshow at the and of the video. Turning club links http://www.norcalwoodturners.org/ http://bayareawoodturners.org/ http://www.svwoodturners.org/ http://www.westbaywoodturners.com/ http://www.goldturners.org/ Mark baid - https://www.youtube.com/channel/U

 

Burr Elm Platter
By: Stewart Furini
November 18, 2017 · 1,203 views

Another video without any colouring! Well, without any colouring I've added...as this piece of wood is just gorgeous as it is. It's a piece of elm burr from Jon Dempsey - thanks, Jon! The challenge was the piece was quite thin to begin with and had a rather large crack running through it. Sanded to 400 grit and finished with several coats of Chestnut Finishing Oil. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Torneado artístico plato N 4 parte 1 de 1 - Arte en Torno
By: Arte en Torno
November 15, 2017 · 2,194 views

Cesar desde el laboratorio de Arte en Torno, nos enseña cuales son los factores de seguridad mas relevantes para tornear piezas de gran tamaño y además irregulares logrando transformar trozos de madera en verdaderas obras de arte. Agradecemos muy especialmente al señor Dimitri Yepez quien nos encomienda éste trabajo y nos permite compartir estos vídeos con nuestros seguidores.

 

Torneado artístico plato N 3 parte 4 de 4 - Arte en Torno
By: Arte en Torno
November 15, 2017 · 2,857 views

Cesar desde el laboratorio de Arte en Torno, nos enseña cuales son los factores de seguridad mas relevantes para tornear piezas de gran tamaño y además irregulares logrando transformar trozos de madera en verdaderas obras de arte. Agradecemos muy especialmente al señor Dimitri Yepez quien nos encomienda éste trabajo y nos permite compartir estos vídeos con nuestros seguidores.

 

Torneado artístico plato N 3 parte 3 de 4 - Arte en Torno
By: Arte en Torno
November 15, 2017 · 2,161 views

Cesar desde el laboratorio de Arte en Torno, nos enseña cuales son los factores de seguridad mas relevantes para tornear piezas de gran tamaño y además irregulares logrando transformar trozos de madera en verdaderas obras de arte. Agradecemos muy especialmente al señor Dimitri Yepez quien nos encomienda éste trabajo y nos permite compartir estos vídeos con nuestros seguidores.

 

Torneado artístico plato N 3 parte 2 de 4 - Arte en Torno
By: Arte en Torno
November 15, 2017 · 10,928 views

Cesar desde el laboratorio de Arte en Torno, nos enseña cuales son los factores de seguridad mas relevantes para tornear piezas de gran tamaño y además irregulares logrando transformar trozos de madera en verdaderas obras de arte. Agradecemos muy especialmente al señor Dimitri Yepez quien nos encomienda éste trabajo y nos permite compartir estos vídeos con nuestros seguidores.

 

Torneado artístico plato N 3 parte 1 de 4 - Arte en Torno
By: Arte en Torno
November 13, 2017 · 1,208 views

Cesar desde el laboratorio de Arte en Torno, nos enseña cuales son los factores de seguridad mas relevantes para tornear piezas de gran tamaño y además irregulares logrando transformar trozos de madera en verdaderas obras de arte. Agradecemos muy especialmente al señor Dimitri Yepez quien nos encomienda éste trabajo y nos permite compartir estos vídeos con nuestros seguidores.

 

Torneado artístico plato N 2 parte 2 de 2 - Arte en Torno
By: Arte en Torno
November 13, 2017 · 2,436 views

Cesar desde el laboratorio de Arte en Torno, nos enseña cuales son los factores de seguridad mas relevantes para tornear piezas de gran tamaño y además irregulares logrando transformar trozos de madera en verdaderas obras de arte. Agradecemos muy especialmente al señor Dimitri Yepez quien nos encomienda éste trabajo y nos permite compartir estos vídeos con nuestros seguidores.

 

Torneado artístico plato N 2 parte 1 de 2 - Arte en Torno
By: Arte en Torno
November 13, 2017 · 1,949 views

Cesar desde el laboratorio de Arte en Torno, nos enseña cuales son los factores de seguridad mas relevantes para tornear piezas de gran tamaño y además irregulares logrando transformar trozos de madera en verdaderas obras de arte. Agradecemos muy especialmente al señor Dimitri Yepez quien nos encomienda éste trabajo y nos permite compartir estos vídeos con nuestros seguidores.

 

Torneado artístico plato N 1 parte 2 de 2 - Arte en Torno
By: Arte en Torno
November 13, 2017 · 2,147 views

Cesar desde el laboratorio de Arte en Torno, nos enseña cuales son los factores de seguridad mas relevantes para tornear piezas de gran tamaño y además irregulares logrando transformar trozos de madera en verdaderas obras de arte. Agradecemos muy especialmente al señor Dimitri Yepez quien nos encomienda éste trabajo y nos permite compartir estos vídeos con nuestros seguidores.

 

Torneado artístico plato N 1 parte 1 de 2 - Arte en Torno
By: Arte en Torno
November 13, 2017 · 2,026 views

Cesar desde el laboratorio de Arte en Torno, nos enseña cuales son los factores de seguridad mas relevantes para tornear piezas de gran tamaño y además irregulares logrando transformar trozos de madera en verdaderas obras de arte. Agradecemos muy especialmente al señor Dimitri Yepez quien nos encomienda éste trabajo y nos permite compartir estos vídeos con nuestros seguidores.

 

Woodturning an olive root platter FAIL !!!!
By: Kostas Annikas Deftereos
November 10, 2017 · 1,437 views

in this video i try as many of you ask to make a platter form olive root !! the platter made was sacessfull but the finish goes totaly wrong !!! i put a new Selack that a friend gave to me couple of days before and everything goes bud !! the rest details you can see at the video !!! see you next sunday !!!

 

Roberts Drechselbude - Ein Plätzchenteller
By: Roberts Drechselbude
November 08, 2017 · 232 views

Heute mal wieder ein Teller. Diesmal aus Robinienholz. Zur Zeit laufen auf der Drechselbank viele kleine Projekte für die bevorstehende Advendszeit. Die sind aber alle nicht Videowürdig.... wer sehen will, um was es sich handelt, schaut einfach mal auf meine Facebook-Seite: www.facebook.com/robertsdrechselbude

 

Hot Melt Glue Stencil - Platter Rim
By: Stewart Furini
November 05, 2017 · 2,061 views

Multiple applications of hot melt glue added between spirit stains. Yellow, orange, red and black Chestnut Spirit Stains, Chestnut Acrylic Sanding Sealer, Chestnut Acrylic Gloss Lacquer. Colour applied with an airbrush. Sticker swap - Mike Waldt! https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Walnut crotch plate
By: Lyle Jamieson
November 02, 2017 · 6,674 views

Capture of crotch figure in a walnut plate. Concentrating on tool control with my bowl gouge and sanding and reversing methods.

 

Woodturning a Poplar platter !
By: Kostas Annikas Deftereos
October 28, 2017 · 1,511 views

in this video i use a piece of poplar wood ! is easy to turn and have nice colour !! i hope you will enjoy this video !!! you can find me also ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos

 

Woodturning and colour a maple platter!
By: Kostas Annikas Deftereos
October 20, 2017 · 1,178 views

today was time to use some wood that i have buy long time ago ! a maple platter was a great idea ! i add also some colours !!! i hope you enjoy it we will speak again next sunday !!! you can find me also ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos

 

Tokar Art - Woodturning 87 Cake Plate
By: Dipa Das
October 11, 2017 · 4,045 views

 

Wood turning - First time turning English Walnut, Beautiful Platter!
By: CraftWithAfshin
October 08, 2017 · 1,478 views

---Please also check out these wonderful wood turners--- Mike Waldt : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w RickTurns : https://www.youtube.com/channel/UCghK0Pjzr5YaZK2SlC2Dftw Carl Jacobson : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Stuart Arts : https://www.youtube.com/channel/UCrux70rjZflDA6-ypvaH8DQ Heath Knuckles:https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ ?leksey Bek : https://www.youtube.com/channel/UCz-hSlcLGBOfzw9RKs7m_5g M. Saban Smith Woodturning: https://www.youtube.com/channel/UCpHZv5j6vdMmFjXHDBxPLxw Andy Phillip : https://ww

 

16' Walnut Burl Platter - The Finale
By: Woodturning Arts
October 08, 2017 · 158 views

I turned the bottom of the 16' Walnut Burl Platter. Pics of the finished platter are included at the end of the video. Like/Share/Comment etc. Thanks for watching! Funky One by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100222 Artist: http://incompetech.com

 

Woodturning with Tim Yoder- Burned & Gilted Platter-Part 2
By: woodturningwithtim1
October 06, 2017 · 10,146 views

Using fire, gilt cream and some awesome Ambrosia Maple Tim shows how to make a platter with a unique look. Part 2 shows you how to safely char the wood and apply gilt cream for a metallic look. Chroma Craft Gilt Cream: https://www.chroma-craft.com/product/935/chroma-gilt BernzOmatic High Intensity Trigger-Start Torch Kit: https://www.lowes.com/pd/BernzOmatic-High-Intensity-Trigger-Start-Torch-Kit/50126437 Valspar Clear Lacquer : https://www.lowes.com/pd/Valspar-Clear-Lacquer-Spray-Paint-Actual-Net-Contents-12-oz/3728921 Blue Hawk Brass Coarse Wire Brush: https://www.lowes.com/pd/Blue-Haw

 

Woodturning with Tim Yoder- Burned & Gilted Platter-Part 1
By: woodturningwithtim1
October 06, 2017 · 12,019 views

Using fire, gilt cream and some awesome Ambrosia Maple Tim shows how to make a platter with a unique look. Part 1 takes you through the turning process of the platter. Chroma Craft Gilt Cream: https://www.chroma-craft.com/product/935/chroma-gilt BernzOmatic High Intensity Trigger-Start Torch Kit: https://www.lowes.com/pd/BernzOmatic-High-Intensity-Trigger-Start-Torch-Kit/50126437 Valspar Clear Lacquer : https://www.lowes.com/pd/Valspar-Clear-Lacquer-Spray-Paint-Actual-Net-Contents-12-oz/3728921 Blue Hawk Brass Coarse Wire Brush: https://www.lowes.com/pd/Blue-Hawk-Brass-Coarse-Wire-Brush

 

Woodturning with wet wood a platter !
By: Kostas Annikas Deftereos
October 06, 2017 · 2,282 views

this season we collect a lot of olive wood but is not good for woodturning !! i feel bud that they burn this beautiful wood and i take one to try to make something !!! i hope you like it !! my T shirt is a gift of my friend SHane take please a look to his channel is an amazing maker and person !!! Shane's link !!! https://www.youtube.com/channel/UCP8FfY7yOI98s_OInV_oopw/featured you can find me also ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos

 

A small collection plate
By: Bram the Wadesmill woodturner
October 04, 2017 · 329 views

Made from a yew that had fallen in our village church https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ for Heaths channel https://www.youtube.com/channel/UCUQXrkk8nktQ5N7iup13Brg for Keiths channel

 

Black Rose - Episode 99
By: Paul Lockwood
September 30, 2017 · 533 views

My first detailed project using the Scroll Saw and some Lathe Work. The platter / bowl is turned from a piece of Oak Firewood. All of the Scroll Saw pieces were planed down to their required thicknesses before being cut out choosing the grain direction for each piece. They were all given my home made ebonising solution, glued to the platter and finished with 3 coats of Danish Oil. Link to the video by Steve Good on a shop tour of Judy Gale Roberts, please watch this for some amazing work. https://www.youtube.com/watch?v giDTAb-n6Xo&t 623s Music Sundown, Bloom & Flutter By Butterfly By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Complete guide on turning square platter, made from Panga Panga
By: CraftWithAfshin
September 27, 2017 · 4,560 views

My website: craftwithafshin.com My Patreon: https://www.patreon.com/TurnWithAfshin

 

Svarvat Fat Woodturned Tray Woodturning
By: Elias Klingvall
September 23, 2017 · 880 views

Svarvat fat av Ask med pluggar av Valnöt Gammelgarn Ängmans Snickeri Gotland Woodturned platter made of Ash with plugs of Walnut

 

Turning A Platter
By: Lee Burkholder
September 13, 2017 · 1,240 views

Cumberland Valley Wood Turners, turning a platter, lathe, wood turning, platter, wooden platter, turning

 

Turning a Walnut Burl Platter
By: Woodturning Arts
September 12, 2017 · 962 views

I turn a Walnut Burl cap into a 16' Platter. Turning burl is always exciting because you never know what the grain or the shape is going to look like until it is revealed as turning progresses. I hope you enjoy this video as much as I enjoyed turning this platter! Unfoldment, Revealment, Evolution, Exposition, Integration by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/reappear/ Artist: http://chriszabriskie.com

 

Woodturning - Half n Half
By: Andy Phillip
September 08, 2017 · 56,338 views

Turning a platter using half Oak and half Wenge .. and a little bit of resin (wrong colour).. thanks for watching

 

War Eagle Platter
By: Rons Woodturning shop
August 28, 2017 · 223 views

Made this for a friend who teaches at USM

 

#36 SV Seeker Platter
By: Austringer Creations
August 27, 2017 · 426 views

This is a Teak platter I turned and laser-engraved for Doug Jackson at SV Seeker. Doug has a fascinating project in the works that you should check out. Visit https://www.youtube.com/channel/UCj_XaV1ss-qdD-lPUtTEcXw and follow along as he builds a steel hulled ship in his Tulsa, Oklahoma front yard. He calls it 'The Boat the Internet Built'. https://www.youtube.com/channel/UCj_XaV1ss-qdD-lPUtTEcXw

 

Токарные работы по дереву (Turning wood)
By: Аleksey Bek
August 25, 2017 · 1,753 views

Фото моих токарных работ по дереву за последнее время. Pictures of my lathe work on wood.

 

Тарелка с секторами (A plate of sectors)
By: Аleksey Bek
August 23, 2017 · 609 views

Из брусков дуба и ясеня склеил заготовку. Обработал на токарном станке и получилась тарелка. From scraps of oak and ash, glued billet. Processed on a lathe turned bowl.

 

Lichtenberg Platter
By: Frito Makes
August 22, 2017 · 40 views

Randy Walker made a beautiful platter then decided he wanted to catch it on fire, we used a sign transformer which if far less likely to kill than a microwave transformer. Anyways thanks for watching!

 

Woodturning a Marri Burl Part 3 (Final Part)
By: Al Dunlop
August 18, 2017 · 168 views

Final segment of woodturning the Marri Burl. From lathe chuck, hollowing, sanding to polishing. We have it all.

 

Wood turning - Lets make Cupcake holder/ platter, Yew
By: CraftWithAfshin
August 16, 2017 · 5,633 views

Hey guys today im turning a cupcake holder which has 2 platforms to place cupcake, it can however be used for other stuff like snacks with sauces in middle. My website: craftwithafshin.com My Patreon: https://www.patreon.com/TurnWithAfshin Music: Inspired Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Woodturning - Marri Burl Part 2
By: Al Dunlop
August 15, 2017 · 125 views

Filling and sanding the cracks on the base of my Marri Burl Bowl

 

woodturning a crawfish platter
By: Rons Woodturning shop
August 10, 2017 · 791 views

Spanish cedar platter with pyrography and dye

 

Wood Turning Decrative Wall Art
By: SP Wood Art
August 09, 2017 · 21,082 views

Using my last piece of walnut wood plank in my shop, I show my progression of creating a wall art piece; how I came to the final product. I also show how you can use a wood lathe to make plaques without the need of a router pattern bits. I hope that you enjoy this latest video and get inspired. If you would like see more of SP Wood Art visit us at: www.spwoodart.com Our Webpage www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural stone or a

 

Rainbow
By: OzWorkshop
August 09, 2017 · 326 views

Here is my new project.. Resin rainbow ring.

 

Woodturning - The Tectonic Plate
By: Andy Phillip
August 04, 2017 · 102,062 views

Turning a small Poplar platter with a coloured epoxy infill

 

Wood turning a platter
By: Rons Woodturning shop
August 02, 2017 · 462 views

This 12' platter was fun. I used dye and pyrography to add a little fun.

 

Turquoise platter
By: Rons Woodturning shop
July 22, 2017 · 239 views

Got to play with my new band saw and use some wood dye. This is Spanish Cedar dyed with kinda turquois with a few learned things along the way.

 

The Making of 'Goldie'
By: OzWorkshop
July 22, 2017 · 1,235 views

another decorated platter... inspiration from Stewart Furini Check out his channel https://www.youtube.com/channel/UCImOAiKvAcBdt8O02CdIpXg

 

Woodturning a Box Elder Plate
By: R Humphrey
July 21, 2017 · 5,122 views

Finding the hidden beauty in an old slice of Box Elder wood though woodturning.

 

Turning/Carving An Osb Platter
By: Colbe Pease Woodworking
July 21, 2017 · 439 views

In this video I try and turn a platter of some osb. I wondered if it could work. it ended up turning out pretty cool.

 

Тарелка для шахматиста (The chess plate)
By: Аleksey Bek
July 19, 2017 · 248 views

Очередной эксперимент. Из разных брусков склеил пластину в виде шахмат. После обработки получилась тарелочка. Another experiment. From different bars glued the plate in the form of chess. After processing get the plate.

 

Очередной эксперимент (Another experiment)
By: Аleksey Bek
July 12, 2017 · 763 views

Пилим бруски по диагонали и получаем интересный рисунок. Из заготовки получилась тарелка. Sawed the glued block on the diagonal and made an interesting pattern.

 

Oak Platter
By: AJY Wooden-Stuff
July 09, 2017 · 80 views

Coloured Oak Platter

 

Woodturning a Doussie platter / Ξυλότορνος - κατασκευή ενός πιάτου από Ντουσιε
By: Kostas Annikas Deftereos
July 08, 2017 · 1,233 views

Σε αυτό το βίντεο δοκιμάζω ένα κομμάτι από Ντουσιε και φτιάχνω ένα πιάτο !! το ξύλο μου το έκανε δώρο ο φίλος Σάκης από το ArtStreet52 και τον ευχαριστώ πολύ ! ήταν μια ευκαιρία για έμενα να δοκιμάσω ένα καινούριο ξύλο ! ελπίζω να πήρατε και εσείς κάποιες πληροφορίες περιμένω τα σχόλια σας !!! εδω ειναι το λινκ του Σακη για να μεταφερθητε στο καναλι του ! https://www.youtube.com/channel/UCjljjiwJPIIiTCeu1T8pZOA Aν θέλετε μπορείτε να με βρείτε και στις παρακάτω σελίδες ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos Η μουσική είναι μια πρόσφορα από τους way light creations μπορείτε να μπείτε στο site τους και να κατεβάσετε δωρεάν μουσική : http://waylightcreations.com η να δείτε τις όμορφες κατασκευές τους στο youtube : https://www.youtube.com/channel/UC38CQXaEkI4k_sQCIZOJJ0Q

 

Platter
By: Rich McNatt
July 04, 2017 · 483 views

 

Ghur woodturning light tray
By: Jiří Hurych
July 02, 2017 · 499 views

Woodturning light tray. Test of thin wood. Javorový tácek. Pokus o co nejslabší stěnu tvořenou soustružením. Průměr 190mm, síla stěny od 1,5mm do 2,5mm.

 

chips and dip platter cedar
By: Rons Woodturning shop
June 24, 2017 · 266 views

A really easy chips and dip platter using Spanish Cedar and crushed turquoise.

 

piercing on a maple platter
By: Steve Krumanaker
June 19, 2017 · 689 views

Quick video showing some piercing on a maple platter.

 

Turning a Square plate and colouring it! (Ash wood)
By: CraftWithAfshin
June 18, 2017 · 778 views

Hey guys today im turning a square plate and colouring it for my good friend Ron, Im going to aim and colour it like flame so sit back and enjoy! Music: Inspired Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Wood turning diamond shapped platter by Al Furtado
By: Rebel Turner
June 16, 2017 · 9,284 views

I turn a diamond shaped Cherry platter and discuss tool danger awareness

 

ResinPlatter - Deep Dive
By: OzWorkshop
June 16, 2017 · 446 views

A new platter . 'Deep Dive'. The resin gives depth to the sea like paint

 

#83 Woodturning with Bismuth Off Centre Project (Rescue!)
By: M. Saban Smith Woodturning
June 15, 2017 · 6,150 views

This weeks video was going to be a revisit of another piece called Silver Sea, but it didn't quite work out how I planned, as you'll see. There's a bit of a rescue here! So this piece is now a 10' sycamore interior design piece with a gorgeous boss of bismuth metal cast and inlayed into it. I've not seen anyone woodturning with it before, so I hope it's a project first! Finished with Intrinsic colours, reactive paints from Modern Masters and Hampshire Sheen, I'm really pleased with the result on this piece! At http://www.msabansmith.com, you can read more about this project, see images, an

 

Designing and Turning Plates and Platters
By: Windy City Woodturners
June 15, 2017 · 888 views

Don Johnston talks about design and turning plates and platers. This video was edited to lessen back round noise that was in original.

 

#25 A Coloured Platter
By: Andrew Whale
June 14, 2017 · 967 views

Hi This is my first attempt at using my airbrush in anger and making a coloured platter. I was inspired to have a go at this after watching a video by Martin Saban-Smith. He has created some fantactic objects, including a great looking coloured platter. In fact it was one of his videos that inspired me to purchase the airbrush in the first place. In the end I just couldn't resist trying to copy his platter (sorry!) - although mine is somewhat smaller. His YouTube channel is: https://www.youtube.com/user/workingimage I hope you like the platter and find this video interesting. I learned a lot

 

Fine edge mahogany platter by Al Furtado
By: Rebel Turner
June 10, 2017 · 4,402 views

I turn a mahogany platter super fine edge for the illusion of being fragile. After reading Erik Anderson's comment I am inclined to believe it is Machiche, Sorry about the mislabeling

 

Woodturning a Winged Platter
By: Barry's Woodturning
June 05, 2017 · 724 views

I show how I prepared a piece of Elm wood and turned it into a winged platter. I mounted it using a shop-made face plate and also used a scroll chuck. The platter is roughly 7 inches square and about 1.5 inches tall.

 

Wood turning Poplar platter by Al Furtado
By: Rebel Turner
May 31, 2017 · 23,373 views

This poplar platter had quite a surprise with it's spalting, I became a nice piece. https://www.facebook.com/TheRebelTurner https://twitter.com/AlbertFurtado57 email me alfurtado@verizon.net

 

Splatter
By: OzWorkshop
May 29, 2017 · 2,626 views

A platter decorated using the flow paint method.

 

Wood Turning With Naked Turner Segmented Sapele Saucer
By: Erik Anderson
May 14, 2017 · 1,619 views

Quick look at a little segmented saucer - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

Тарелка для торта (Cake plate)
By: Аleksey Bek
May 11, 2017 · 542 views

В этом видео заканчиваем обработку детали. На выходе получилась тарелка для торта. Приятного просмотра! In this video we finish machining of the part. Out came a plate for the cake. Pleasant viewing!

 

Popular poplar platter
By: Rons Woodturning shop
May 09, 2017 · 45 views

Just a simple platter with an inlay. good way to practice skills on a budget.

 

Woodturning at 54a. #117 A Wenge platter
By: Keith Barrow
May 06, 2017 · 4,076 views

http://www.spanglefish.com/woodturningat54a

 

ROADSIDE Wood..Turned Platter? : Making of
By: Michael Zurcher
May 06, 2017 · 1,148 views

Woodturning, Making, Creating: Finding interesting discarded pieces of wood is the BEST! In this video I show you how I turned a piece of wood found on the side of the road into a rustic serving dish/platter. Thanks for watching! Please feel free to comment, like, share, & I'd love to have you as a subscriber if you aren't already! :) Sticker swap? Send your sticker to the address listed below & I will send you one back. Thanks! :) Michael Zurcher 313 Gordon Drive Exton, PA 19341 Check out my Instagram here: https://www.instagram.com/michael_zurcher

 

Woodturning with Tim Yoder- Crayon Platter
By: woodturningwithtim1
May 04, 2017 · 78,169 views

Crayons are a kid's best friend. In an attempt to relive his younger days, Tim decides to play with Crayons by melting them into a turning blank. He takes you through all the steps to make a unique multi colored platter . Woodturning with Tim DVDS & Tools: http://www.woodturningwithtim.com Teacher's 800 Crayon Pack: https://www.amazon.com/gp/product/B00006IBPK/ref oh_aui_detailpage_o02_s00?ie UTF8&psc 1 Robust Lathes: http://www.turnrobust.com Thompson Lathe Tools: http://thompsonlathetools.com

 

You Mean - That Wood Had A Platter Inside?
By: As Wood Turns
April 28, 2017 · 10,970 views

http://www.AsWoodTurns.com This project comes from a block of pine I received as a raffle prize at a woodturning club meeting. Initially, I was disappointed that it is pine, a softwood, that I don't like to turn. It has been a while since I turned a platter. I could not see a deep bowl in the half log -- only possibly a platter. For a platter, I mounted the wood to a screw chuck after chain sawing a good slice. Then trued the face before rounding off the perimeter. Then cut a mortise to receive my larger jaws. Then completed the bottom side of the platter. After reversing the platter, I tu

 

Wood Turning With Naked Turner Nice Piece OF Ash Plate
By: Erik Anderson
April 27, 2017 · 3,205 views

In this video I make a plate from an upcycled piece of Ash! - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

16' Walnut Platter (my 1st video)
By: AtkinsonWoodturning Beast
March 20, 2017 · 270 views

This is the 1st video that I recorded published Dec. 2016. I was using my cell phone and was not able to get all the shots of me working that I would like. Please forgive the quality of this video I since purchased a good video camera and will be working with professionals on bringing up the quality of my lighting and video. Wood type: Black Walnut (Recovered from Portland Oregon) Finished Diameter:16'' Finished Thickness:2.25' Wall Thickness: .75' Blank starting size: 19x18x2.5' I want to upload a new project video the 1st of every month and some bonus videos (if at all possible – I am a

 

Escher (Tumbling) Plate
By: Maple-Crossing Woodworks
March 19, 2017 · 38,392 views

I've seen a few of these on the internet, and watched a few YouTube videos to see how others have made them. I was really excited to try this out, and happy with the results. Some fellow YouTubers have made this look really easy, but I found that some steps take a lot of trial and error to get it right. In the end, I wish I had picked a lighter wood for the 3rd square, but in person there is a little more contrast than what you can see in pictures. Inspired by M.C. Escher's works, this Tumbling plate measures 8' across, is made from Black Walnut, English Walnut and Cherry segments. It was finished with HUT's friction polish and buffed to a shine. I hope you enjoy! Filmed on an iPhone7 Plus and a GoPro Hero4 Session

 

Coloured platter
By: Robert O Connor The Woodturning Studio
March 16, 2017 · 140 views

Short video showing the work involved preparing platter after colour is added to platter.

 

Outboard Maple Turning Part #1
By: The Studios of Bradley R.M. Woodturning
March 09, 2017 · 1,434 views

Outboard turning a Maple platter at The Woodworking Shows 2017 Part #1

 

Woodturning Large Cherry Platter
By: Josh Bayer
February 25, 2017 · 8,277 views

Turning a large Cherry wood platter from a dead standing Cherry tree. Diameter ended up being about 19'. Thanks for watching, if you enjoyed the video please subscribe and check out my other videos. JB Feb 2017

 

Turning a Platter - Dec 2016
By: BayLake Woodturners
February 19, 2017 · 209 views

Tom Hughes takes us through the process of turning a platter. Recorded live at our December 2016 meeting. Note: No audio for the final two minutes due to microphone problems.

 

Camphor Laurel Platter
By: Fatso's Workshop
February 11, 2017 · 314 views

I found some footage of me turning a Camphor Laurel fruit platter from last year. This is one of the bigger turnings I've had a go at recently. The Camphor laurel is a great timer to turn, fantastic figure but the smell can be quite overpowering in the workshop, what you don't get through the camera is the all pervasive scent of Vicks Vapour rub that covers you as your turning the bowl. It makes the workshop smell halfway between a hope chest and a football locker room. Music is Planxty George Galiatsos by Jimmy Gregory, one of my favourite instrumental tunes

 

Woodturning Big Burl to Platter
By: SG Art Turning
February 08, 2017 · 282,682 views

Patreon : https://www.patreon.com/sgartturning You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Email : simgadoury@gmail.com Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

What is a Paten and How do I turn One? Part 1
By: Mike Peace Woodturning
January 27, 2017 · 5,368 views

I demonstrate how to turn a plate of Bradford Pear including texturing and cover a few platter design tips. When the small plate is used to hold the communion wafers or bread in the Christian ceremony of Communion, it is called a paten. Click here to watch Part 2: https://youtu.be/_L6b9W_kVrI Click here to watch the companion video on woodturning a Chalice: https://youtu.be/aRE7hfizPPI You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

What is a Paten and How do I turn One? Part 2
By: Mike Peace Woodturning
January 27, 2017 · 3,113 views

I demonstrate how to turn a plate of Bradford Pear including texturing and cover a few design tips. When the small plate is used to hold the communion wafers or bread in the Christian ceremony of Communion, it is called a paten. This is a companion video to the one on woodturning a chalice. Click here to watch Part 1: https://youtu.be/THPyChPFpjI You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Как Сделать Деревянное Кольцо
By: The Russian Woodworker
January 24, 2017 · 902 views

В сегодняшнем видео я покажу вам как я сделал деревянное кольцо на токарном стонке.

 

Juhar Tál
By: Szabó János
January 22, 2017 · 557 views

Juhar tál esztergálása Milán módra

 

Naked Turner Georgeous Fiddleback Maple Plate
By: Erik Anderson
January 22, 2017 · 2,922 views

- - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

woodturning a walnut platter
By: cciyz
January 21, 2017 · 920 views

So this is a platter made of walnut harvested from Amsterdam. When i turnt it it was already dry. if you would like to purches it it is for sale on my website and in the store TOON Amsterdam. my web site is cciyz.net

 

turning square platter bottoms
By: Nick Rosato
January 16, 2017 · 90 views

This is a time-lapse video of turning the bottom of square platters. I used a wood worm screw to hold each platter onto the lathe. The tailstock is pulled up for support.

 

Como hacer un plato de madera parte 6 de 6 - Arte en Torno
By: Arte en Torno
January 15, 2017 · 6,371 views

En el taller de Arte en Torno, Cesar nos muestra como tornear un plato de 50 centímetros de diámetro y un espesor de 1 centímetro de manera sencilla y eficiente.

 

Como hacer un plato de madera parte 5 de 6 -Arte en Torno
By: Arte en Torno
January 14, 2017 · 7,256 views

En el taller de Arte en Torno, Cesar nos muestra como tornear un plato de 50 centímetros de diámetro y un espesor de 1 centímetro de manera sencilla y eficiente.

 

Como hacer un plato de madera parte 4 de 6 -Arte en Torno
By: Arte en Torno
January 14, 2017 · 6,135 views

En el taller de Arte en Torno, Cesar nos muestra como tornear un plato de 50 centímetros de diámetro y un espesor de 1 centímetro de manera sencilla y eficiente.

 

Como hacer un plato de madera parte 3 de 6 - Arte en Torno
By: Arte en Torno
January 14, 2017 · 6,152 views

En el taller de Arte en Torno, Cesar nos muestra como tornear un plato de 50 centímetros de diámetro y un espesor de 1 centímetro de manera sencilla y eficiente.

 

Como hacer un plato de madera parte 2 de 6- Arte en Torno
By: Arte en Torno
January 14, 2017 · 7,614 views

En el taller de Arte en Torno, Cesar nos muestra como tornear un plato de 50 centímetros de diámetro y un espesor de 1 centímetro de manera sencilla y eficiente.

 

Como hacer un plato de madera parte 1 de 6 - Arte en Torno
By: Arte en Torno
January 14, 2017 · 21,787 views

En el taller de Arte en Torno, Cesar nos muestra como tornear un plato de 50 centímetros de diámetro y un espesor de 1 centímetro de manera sencilla y eficiente.

 

Woodturning an Offering Plate Part 1
By: Mike Peace Woodturning
January 13, 2017 · 3,521 views

I demonstrate how I wood turned some offering plates for my church. An offering plate is not much more than a simple platter with more challenges. Watch to see how I dealt with the challenges of turning each platter close to identical and making them stackable! Click here to watch Part 2: https://youtu.be/GvGPJxjEg5A Click here to read or download the article by Wes Jones, Turning Collection Plates: https://drive.google.com/file/d/0B5Ng9K34IcxIS3c5UE5hWXhrejA/view?usp sharing You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning an Offering Plate Part 2
By: Mike Peace Woodturning
January 13, 2017 · 3,401 views

I demonstrate how I wood turned some offering plates for my church. An offering plate is not much more than a simple platter with more challenges. Watch to see how I dealt with the challenges of turning each platter close to identical and making them stackable! Click here to watch Part 1: https://youtu.be/S1_gCWUXf1w Click here to read or download the article by Wes Jones, Turning Collection Plates: https://drive.google.com/open?id 0B5Ng9K34IcxIS3c5UE5hWXhrejA You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Turning a Platter with Roger Domina
By: IKI Woodturners
January 07, 2017 · 687 views

Roger Domina gave a brief discussion about platters vs. plates then demonstrated the turning of a platter.

 

Wet Oak Platter - Episode 44
By: Paul Lockwood
December 16, 2016 · 703 views

I had a piece of wet oak where the top half had some very large cracks. However the bottom half looked good, even though still quite wet. The plan was to turn this down thin and finish it of and let it air dry to see what happens. Hopefully it should not split but do expect the shape to warp a little. A fun project which the piece was finished with Sanding Sealer, Yorkshire Grit and finally two coats of Woodwax22. Thoroughly recommed Yorkshire Grit! Website: www.yorkshire-grit.com Facebook: https://www.facebook.com/Yorkshire-Grit-1198311676855162/ Music She Dreams In Blue (Instrumental) and Untitled (Instrumental) By Josh Woodward http://freemusicarchive.org/music/Josh_Woodward/ From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/legalcode Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Тарелка с парусником (Plate with sailboat)
By: Аleksey Bek
December 14, 2016 · 549 views

Делаем очередную тарелку из клена. Темная полоса напомнила о море. Я решил украсить ее рисунком старинного парусника. Make another plate out of maple. Dark streak reminded of the sea. I decided to decorate it with a picture of an ancient ship.

 

PLATO DE GARRAS
By: Heinrich Garcia
December 13, 2016 · 5,795 views

PLATO DE GARRAS

 

Turning platter
By: Nick Rosato
December 09, 2016 · 31 views

 

Three Orange Plates # 51
By: The Wood Whirler
December 05, 2016 · 1,168 views

I turn and engrave three Osage orange plates for our 54th anniversary.

 

Тарелочка с рисунком (A plate with a pattern)
By: Аleksey Bek
November 30, 2016 · 835 views

Точим тарелочку из ясеня. Потом выжигаем в средине тарелочки рисунок. Маленький Новогодний подарок готов. On a lathe make a plate. Carefully apply the pattern . A little new year's gift ready.

 

Roberts Drechselbude - Nur ein Birkenholzteller
By: Roberts Drechselbude
November 30, 2016 · 473 views

Heute mal nur ein Teller aus Birke für kleine Teile: Plätzchen, Schnittchen,..... Wie immer ohne Kommentar, da ich keine Lehrvideos machen möchte.

 

Cherry Wood Platter
By: Peter Matthew
November 29, 2016 · 1,129 views

Check out how I finish turn this platter out of Cherry wood! Send Mail Here Peter Matthew 6388 East Executive Drive Westland, MI 48185 Check out my WEBSITE http://www.peterturnswood.com EBAY STORE http://www.ebay.com/usr/dste6080 EMAIL FOR BUSINESS INQUIRIES OR QUESITONS: peterturnswood@gmail.com AWESOME WOODTURNING PLAYLISTS https://www.youtube.com/playlist?list PLE2bcZVXSO84px9YMPMvQhkK_KezJUcWR https://www.youtube.com/playlist?list PLE2bcZVXSO84v4QYhuPqfAFvnP6hPvZXc https://www.youtube

 

Заготовки для тарелок (Blanks for plates)
By: Аleksey Bek
November 28, 2016 · 2,297 views

В этом видео делаю подготовку для точения тарелок. Предварительная обработка заготовок на пиле. In this video make preparation for turning plates. Pre-machining of workpieces on the saw.

 

Woodturning maple natural edge platter 21' end grain
By: Boston Woodturning
November 18, 2016 · 682 views

Woodturning maple natural edge platter 21' end grain

 

Woodturning with The Old Woodworker - Sassafras platter with Bubinga accents
By: H F Bowern Designs - Harold Bowern
November 16, 2016 · 4,641 views

Welcome back This time I am using a piece of Sassafras and two ” strips of Bubinga to create a shallow platter. Finished off with Yorkshire Grit and Shellawax friction polish. A very dusty and smelly turn. The Sassafras has a very distinctive spicy odour. Full face shield and lung protection is a MUST. The Sassafras looks like ash with its open grains. The platter finished up very nice after sanding from 80 grit to 240 grit and adding three applications of Shellawax. For information on the various “The Wood Database” http://www.wood-database.com/ There is a good selection of informati

 

Turning a bubinga platter
By: Todd Halleman
November 16, 2016 · 325 views

 

Тарелка под фрукты (The plate under the fruit)
By: Аleksey Bek
November 13, 2016 · 10,313 views

Весь процесс изготовления тарелки под фрукты с комментариями. Объяснение некоторых рискованных моментов в изготовлении.

 

vörösfenyőtál
By: Szabó János
November 01, 2016 · 2,295 views

larch bowl :)

 

Spalted maple plate done with glueblock
By: Lyle Jamieson
October 27, 2016 · 3,172 views

I have booked some live demonstrations around the country from my shop, with my tools, my cameras. If you are interested give me a call. 231-947-2348 lylejamieson.com Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project oriented videos. I still hope over the long haul to cover all the techniques over multiple videos. This project format is much better at showing the entire turning sequence start t

 

Woodturning at 54a. #100. Simple Sycamore Platter.
By: Keith Barrow
October 17, 2016 · 8,590 views

I thought of trying something different for this video,but had a change of mind(as you do)and decided 'less is more' for this one!

 

Что можно сделать из полена
By: Аleksey Bek
October 13, 2016 · 9,277 views

Я делаю из полена ясеня пластины. Думаю изготовить из пластин небольшой трельяж. На это нужно время , но думаю все получится.

 

#11 Wood turning a RAF / MOD logo platter
By: Greenvill Woodturning
September 25, 2016 · 369 views

This is the Kobra paint I used: http://amzn.to/2cpdS5P The ash is from http://www.homeofwood.co.uk

 

#9 Woodturning a 'sunrise effect' ash platter
By: Greenvill Woodturning
September 24, 2016 · 7,190 views

This is the Kobra paint I used: http://amzn.to/2cpdS5P The ash is from http://www.homeofwood.co.uk

 

#8 Wood Turning an ash platter with a mosaic wall tile inlay
By: Greenvill Woodturning
September 21, 2016 · 1,104 views

The day started out turning an ash platter with the intention of inlaying a mosaic wall tile, due to over zealous scraping/sanding it turned into two quite different platters! This is the Kobra paint I used: http://amzn.to/2cpdS5P Milliput is available in different colours and can also be coloured using artist powders: Black Milliput: http://amzn.to/2cVbggM White Milliput: http://amzn.to/2czWppw Terracotta Milliput: http://amzn.to/2czWf1z To colour, use the white Milliput and mix with Sennelier pigments http://amzn.to/2cVd4qg (you may need to add Araldite slow set (http://amzn.to/2cVc59u) to help it mix better) The ash is from http://www.homeofwood.co.uk

 

#7 Wood Turning an Ash platter with Milliput rings - part 2
By: Greenvill Woodturning
September 18, 2016 · 3,018 views

Today I turn a 10x2 ash platter and use Milliput for the first time. This is the second of 2 parts and shows the finished product. Milliput is available in different colours and can also be coloured using artist powders: Black Milliput: http://amzn.to/2cVbggM White Milliput: http://amzn.to/2czWppw Terracotta Milliput: http://amzn.to/2czWf1z To colour, use the white Milliput and mix with Sennelier pigments http://amzn.to/2cVd4qg (you may need to add Araldite slow set (http://amzn.to/2cVc59u) to help it mix better) The ash is from http://www.homeofwood.co.uk

 

#6 Wood Turning an Ash platter with Milliput rings - part 1
By: Greenvill Woodturning
September 18, 2016 · 1,369 views

Today I turn a 10x2 ash platter and use Milliput for the first time Milliput is available in different colours and can also be coloured using artist powders: Black Milliput: http://amzn.to/2cVbggM White Milliput: http://amzn.to/2czWppw Terracotta Milliput: http://amzn.to/2czWf1z To colour, use the white Milliput and mix with Sennelier pigments http://amzn.to/2cVd4qg(you may need to add Araldite slow set (http://amzn.to/2cVc59u) to help it mix better) The ash is from http://www.homeofwood.co.uk

 

#5 Wood turning a stone effect rimmed wooden platter
By: Greenvill Woodturning
September 17, 2016 · 9,843 views

An experimentation using stone effect spray paint on a Sycamore Platter. There are a wide range of coloured stone effect spray paints, take a look http://amzn.to/2cyK7xz

 

02 - Small Padauk Platter
By: Bill Rockwood
August 30, 2016 · 224 views

Small Padauk Platter, finished out a hair over 9 inches in diameter.

 

Woodturning A Cosmic Platter
By: Colbe Pease Woodworking
August 30, 2016 · 12,116 views

In this video, I turn a platter and paint a Cosmic design on it. I saw this technique on Gary Lowes Channel

 

Wood Turning A Yin-Yang Platter
By: Colbe Pease Woodworking
August 25, 2016 · 3,106 views

In this video i turn a small Maple and Walnut plater in the shape of a yin-yang symbol. I used the cnc maching to cut the shapes. it did an alright job but I ended up doing alot of shaping with the drum sander.

 

The Plank Plate, a bushcraft gift
By: Jim Overton - Jimson's Stuff
August 08, 2016 · 15,719 views

In this project video I am using a plank of American White Oak to make a bushcraft style plate for a friend. I have finished it in Tung Oil. My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

Ξυλοτορνος - μια σταγονα χρωμα ! - Woodturning - A platter that i call ''one drop of grain'' !
By: Kostas Annikas Deftereos
July 30, 2016 · 975 views

Σε αυτο το βιντεο προσπαθησα να σας δειξω οτι μια μονο απλη αλλαγη απο τα συνιθησμενα μπορει να δωσει ενα μοναδικο αποτελεσμα ! Ελπιζω να σας αρεσε ! θα τα πουμε την επομενη κυριακη ! At this video i try to saw you that only a small deference can give as a very nice effect ! i hope you like this project !!!! MY LINKS Facebook www.facebook.com/annikas8 https://www.facebook.com/annikasgreek... Google https://plus.google.com/1065720657902... Instagram https://www.instagram.com/kostas_anni... #kostas_annikas_deftereos Tumblr https://www.tumblr.com/blog/annikas88 Pinterest gr.pinterest.com/annikas8/ Linkedin gr.linkedin.com/in/kostas-annikas-defter­­­eos-0a8a87b0 Viber 306938762384

 

Woodturning with Tim Yoder-Cosmic Clouds Platter
By: woodturningwithtim1
July 28, 2016 · 523,726 views

Tim shows you how to make woodturner Gary Lowe's 'Cosmic Clouds' painted platter. Using iridescent paint Tim creates a shimmering surface that has intense color. Paints https://www.amazon.com/Sonjas-Artist-Acrylic-Iridescent-Turquoise/dp/B00A6W9TXG Check out Gary Lowe's YouTube page for more videos on coloring turnings. https://www.youtube.com/channel/UCgdG-Vh5Uj2GNdVgnsDEMtA

 

Ξυλότορνος κατασκευή πιατέλα από ρίζα ελιάς - Woodturning a platter out of an olive root burl
By: Kostas Annikas Deftereos
July 10, 2016 · 5,799 views

In this video I like to saw you the way that I imagine the part that I will use on lathe ! This log that I cut on this video is a extremely rare piece of olive the root have comes out of the earth and after go again in to the earth . I have keep the piece that was outside of the eart . The only bud think is that was full of Ants and was very hard to turn and those little ants walk on your body ha ha ha lol.... The battery finish when I start the sunding but the time was very late at the night so I haven't time to charge again the camera and this part is missing ! Thanks for watching see you next Sunday !,, MY LINKS Facebook www.facebook.com/annikas8 https://www.facebook.com/annikasgreek... Google https://plus.google.com/1065720657902... Instagram https://www.instagram.com/kostas_anni... #kostas_annikas Tumblr https://www.tumblr.com/blog/annikas88 Pinterest gr.pinterest.com/annikas8/ Linkedin gr.linkedin.com/in/kostas-annikas-defter­­­eos-0a8a87b0 Viber 306938762384

 

Ξυλοτορνος - κατασκευη ενος μπολ απο οξια woodturning -Making a beech wood bowl
By: Kostas Annikas Deftereos
July 03, 2016 · 371 views

This is a video of a simple beech bowl video! I don't have time this week for making a new video so I upload one from the winter !

 

More Bowls & Plates for Hazel
By: BMac Woodturning
June 23, 2016 · 613 views

More Maple bowls and Sycamore plates.

 

Plates & Bowls for Hazel
By: BMac Woodturning
June 12, 2016 · 803 views

These are Maple and Sycamore plates and bowls I made for one of my daughter's friends. The blanks were all bought in as bowl and plate blanks so I just had to let them dry and do a couple of cuts to let moisture ease out in stages to prevent splitting. The pieces are sanded to 500 on the inside, eating, surfaces and 180 on the outside to allow good grip. I wash the finished bowls with alcohol and finish with a few costs of mineral oil (liquid paraffin).

 

Indian basket weave plater
By: Rich McNatt
June 09, 2016 · 1,606 views

It has been a few years since I have done a video on this turning technique, thought I would do another HOPE YOU ENJOY!!

 

Cherry Plate with Epoxy Putty
By: Daniel Vilarino
June 06, 2016 · 4,636 views

Hola/Hi! Este video está en Inglés, para verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/YQNQbfcvSDQ ***This video is in English*** Esta es mi participación en el Reto del Mes de Mayo para el Grupo de Facebook: Amigos por el Torno de Madera. El desafío era realizar un objeto torneado de madera que tuviera integrado, algún otro tipo de material. Yo elegí hacer inclusiones de masilla epoxy (Milliput) ***This is my entry for the May's Challenge in the Facebook Group: 'Amigos por el Torno de Madera'. The challenge was to make a turned object in wood that would i

 

Exotic Wood Platter
By: Nick Zammeti
May 27, 2016 · 34,020 views

I tried to make this a bit different than the last one I made but it seems to look very similar. hope you like it. Please like and subscribe. Music provided by Music: http://www.bensound.com Wood bought from Exotic Hardwoods http://www.exotichardwoodsukltd.com

 

Large wormy Mahogany Platter
By: Rebel Turner
May 22, 2016 · 39,752 views

17' wormy Mahogany Platter. I only sanded this to 80 grit and applied 1 coat of satin clear lacquer because I wanted to let it show the life that it once had. the life that was in it and the happiness it has brought me. after posting some pictures on Facebook asking for help on a name this one 'Nuova vita' (New Life) was one of many great suggestions Thanks for watching.

 

Dale Nish Platter
By: Erick Wood
May 22, 2016 · 647 views

This is a video of a platter I made from a Dale Nish collection. Dale passed away in 2013 and Craft Supplies USA in Provo, Utah has several pieces from his collection that are for sale. I was excited when I saw that they were selling these. Hope you enjoy this and please subscribe!! Tells us what you think! Website: www.woodsheddesigns.net Facebook: WoodShed Designs Instagram: @woodsheddesigns @sheturnswood Craft Supplies USA: www.woodturnerscatalog.com

 

E40 Short Notice Retirement Platter & Possibly No Videos Next Week
By: M. Saban Smith Woodturning
May 13, 2016 · 2,588 views

This week - a 'last minute' commission for a platter for a presentation on 17th June and plenty more too! Because of UKIWS and another event I am helping organise for the week after UKIWS, there may not be any videos from me next week. I'll do my best to publish something, but I'm going to be very hard pushed. Apologies in advance if I can't make it happen for you. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free vide

 

Точим тарелку из ясеня 2
By: Аleksey Bek
May 06, 2016 · 3,324 views

Доводим до конца начатое. До этого сломался станок, пришлось его модернизировать. Станок прошел первые испытания, получилась тарелка из ясеня. Все отлично, теперь можно точить детали и большего размера. Brought to finish the job. Prior to that, broke the machine, I had to upgrade it. The machine passed the first test, get a bowl from ash. Everything is fine, you can now sharpen details and larger size.

 

Back & White Ash Platter
By: Rebel Turner
May 01, 2016 · 4,771 views

Woodturning Back & White Ash Platter I was experimenting with this platter's finish here are the results Back & White Ash Platter

 

Pen Blank Platter/Plate
By: Nick Zammeti
April 24, 2016 · 17,117 views

Here's a platter I made with scrap pen blanks. Hope you enjoy watching the video. Please don't forget to Like the video and Subscribe. I have some really interesting stuff on the way so stay tuned.....

 

Episode 2: Lacewood Platter
By: Chris Black
April 24, 2016 · 503 views

In this episode, the second in the series, I share how I turn a Platter or Dish from a Large Blank of Lacewood on my new (second hand) Record / Nova 1624 Lathe. Music thanks to FMA Free Music Archive via Windows Movie Maker - Thank You !

 

Square top Eucalyptus Platter
By: Rebel Turner
April 23, 2016 · 3,711 views

Square top Eucalyptus Platter This piece speaks for itself and the new lathe handled it like a champ.

 

Точим тарелку из ясеня (попытка 1)
By: Аleksey Bek
April 18, 2016 · 1,993 views

Неудачная попытка сделать тарелку из ясеня. В самом начале работы сломался китайский станок. Теперь доделаю тарелку после ремонта станка.

 

Woodturning at 54a. #72 Maple platter with pyrography
By: Keith Barrow
April 15, 2016 · 12,594 views

Another attempt at pyrography,on a simple 6 inch Maple platter

 

Maple Platter
By: Jeremy Edwards
April 14, 2016 · 798 views

This is a 10 inch Maple platter I made last night.

 

Woodturning With The Naked Turner Quick Look At A Walnut Plate Inspired By My GrandDaughter
By: Erik Anderson
April 11, 2016 · 1,810 views

Quick look at a walnut plate.

 

Larry McCardel June 2010 Platters1
By: Northcoast Woodturners
March 29, 2016 · 194 views

Larry McCardel turns a platter for the Northcoast Woodturners

 

Upcycled Oak Platters
By: Ian Maude
March 28, 2016 · 566 views

A couple of Oak platters up cycled from a scrap of Oak worktop. My apologies for the poor camera angle, especially when I got it on the chuck! I will improve this for new videos. Glen Teagle makes lovely carbide chisels and his website is http://www.ukwoodcraftandcarbidechisels.co.uk UKIWS Website - http://www.ukiws.co.uk UKIWS facebook page - https://www.facebook.com/ukiws Mike Waldt's channel - https://www.youtube.com/user/TheCymruBoy Martin Sabin Smith's channel - http://www.youtube.com/c/MartinSabanS... Steven Twydell's Channel - https://www.youtube.com/user/stevo15771

 

Lathe on wood do a big plate.
By: Аleksey Bek
March 28, 2016 · 994 views

Из клееной заготовки ясеня и дуба решил выточить большую вазу. Потом выточил ножку из дуба. Получилась объемная и глубокая ваза под фрукты. Procurement of laminated ash and oak decided to carve a large vase. Then he carved a leg from oak. Turned out to be voluminous and deep vase under fruit.

 

Teller aus Kirschholz drechseln
By: Tiroler Drechsler
March 26, 2016 · 13,262 views

Damit das Osterlamm auch einen schönen Platz auf dem Tisch bekommt drechsle ich heute einen aus Kirschholz. Ich wünsche allen Zuschauern Frohe Ostern und viel Spaß beim drechseln eurer eigenen Projekte. _______________________________ Musik: Andrew Applepie Have fun! \( _ )

 

Woodturning - small platter, mounted without glue block or screws
By: SJWoodworks
March 21, 2016 · 10,022 views

Sometimes a platter blank is too thin to use a woodworm screw or a faceplate with screws. A glue block works, but it's not always convenient. I show a method here that is very safe, very secure, very fast, and very effective. I probably didn't invent it, but I hope this helps someone looking for another way to mount a platter to the lathe.

 

Woodturning With The Naked Turner Sapelle Plate Quick Look
By: Erik Anderson
March 20, 2016 · 1,261 views

Quick Look at a Sapele Plate I turned as a gift

 

Ξυλοτορνος πως φτιαξετε ενα εκκεντρο πιατο. Woodturning-how to make an off center plate
By: Kostas Annikas Deftereos
March 16, 2016 · 2,063 views

Έχουμε την ευκαιρία να παρουσιάσουμε το χόμπι του ξυλότορνου για πρώτη φορα στο ευρή κοινό στην Ελλάδα ! Όσοι θέλετε να βρεθούμε απο κοντά να μιλήσουμε να σας λυσω απορίες να δοκιμάσετε τα εργαλεία θα έχετε την ευκαιρία να με συναντήσετε στην έκθεση ειδών Χειροτεχνίας 'ΧΕΙΡΟΤΕΧΝΙΚΑ' που θα παροδώσω δύο σεμινάρια. Το Πρώτο 2 Απριλίου και ωρα 19:30 με τίτλο 'Γυρο-γυρο όλοι !' που θα εξηγώ την κατασκευή των μπολ και θα μπορέσετε να δοκιμάσετε τα σκαπρέλα και να μάθετε πως φτιάχνεται και γυαλιζεται ένα μπολ απο το Α ως το Ω. http://xeirotexnika.gr/our-events/ann... Και το Δεύτερο 3 Απριλίου

 

Woodturning and Leather Binding/Lacing Sycamore Platter 'Bound #1'
By: M. Saban Smith Woodturning
March 04, 2016 · 3,127 views

This week, I look past my recent segmenting and have a go at binding/lacing shallow sycamore platter. The piece is 11' across, tinted with Rosewood stain, cut and then bound. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.c

 

Video #6: Shop Updates and Purpleheart Platter
By: AnkleBiter Woodworks
February 20, 2016 · 1,088 views

Well, it took over a month and a half to finally get it completed, but here is the first video of 2016. I started this project just after the first of the year but health issues had caused it to drag on far longer than anticipated. Many things discussed in the update as well as a very nice Purpleheart Platter is created. Huge shoutout to Carl Jacobson and his YouTube Channel for the sticker swap. https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Another huge shoutout to Rottenpots Woodturning for their awesome tools rests. This is the first time I used one of their custom tool rest

 

Woodturning at 54a. #61 Oak platter with epoxy and metal powder inlays.
By: Keith Barrow
February 06, 2016 · 7,252 views

Just trying out something new to me.What an enjoyable hobby this is!!

 

Oak and glass platter part 2
By: H F Bowern Designs - Harold Bowern
February 05, 2016 · 1,228 views

Welcome back Time to finish up the build for the Oak and glass platter. I am using a 3 x 3' block of Red Oak as the material for the top plug and a piece of ebony 1' square blank for the knob. I will be doing a followup to show what techniques I used to finish the project. Thanks again for watching. If you like this video, please click the 'Like' button. If haven't already don't forget to click the 'Subscribe' button, to get YouTube notices of my new videos as I add them. Tell all your friends and neighbours about my channel. Thanks to all who have taken the time and interest to subscribe to my channel, I am blown away with your support. Visit my website, http://hfbowern.com , where you will find samples of my woodworking projects, my BLOG, and other things about me and my hobbies. Until next time take care, stay safe in your workshop, but most of all, enjoy the woodworking journey!

 

Naked Turner Simple Segmented Poplar Plate
By: Erik Anderson
January 30, 2016 · 2,790 views

I turn a poplar plate and if you have the time I think you will like and learn from Cesar at https://www.youtube.com/user/victoracheagos hope you enjoy!

 

Oak and glass platter part 1
By: H F Bowern Designs - Harold Bowern
January 29, 2016 · 1,377 views

This week I am starting a two part series on making an Oak and Glass platter. The Oak is a piece of Red Oak, 9' square by 1 1/2' thick, and the glass is a shade from an old dining room hanging fixture. The making of the top, i.e. the glass top section, will be my second video hopefully next week or when the weather here lets me get back into the workshop. To begin with, I tried as best I could, to make an evenly cut 8 sided wood blank with the intention of being able to keep the straight edges in the platter section. This seemed to work out well. I am will be figuring out what method of fi

 

wood turning # 31 bamboo end grain plate
By: Woodslee Summercraft
January 23, 2016 · 2,907 views

upcycling or repurposing a Bamboo end grain cutting board into a plate.

 

Ash Platter by David Woodward
By: David Woodward
January 03, 2016 · 130 views

I created this video with the YouTube Slideshow Creator (http://www.youtube.com/upload)

 

Poplar & Walnut Platter
By: Erick Wood
December 27, 2015 · 43 views

Quilted poplar with a walnut base added to it later. It is about 11' in diameter and the overall height of finished piece is about 7'. I am always open to critiques and enjoy your comments. Thanks for watching. Please subscribe. Facebook: WoodShed Designs

 

Cheezy Platter: Glue-ing the knife handle
By: Don Kleinschnitz Jr.
December 24, 2015 · 40 views

 

Cheezy Platter: Applying a finish ...
By: Don Kleinschnitz Jr.
December 24, 2015 · 20 views

 

Cheezy Platter: Preparing to apply the finish
By: Don Kleinschnitz Jr.
December 24, 2015 · 13 views

 

Cheezy Platter: Finish cutting the interior
By: Don Kleinschnitz Jr.
December 24, 2015 · 14 views

 

Cheezy Platter: Roughing the interior
By: Don Kleinschnitz Jr.
December 24, 2015 · 34 views

 

Cheezy Platter: Drilling the inlay holes
By: Don Kleinschnitz Jr.
December 24, 2015 · 41 views

 

Cheezy Platter: Cutting the tile recess
By: Don Kleinschnitz Jr.
December 24, 2015 · 20 views

 

Cheezy Platter: Setting up the drilling tool .....
By: Don Kleinschnitz Jr.
December 24, 2015 · 49 views

 

Cheezy Platter: Mounting the chuck for turnaround
By: Don Kleinschnitz Jr.
December 24, 2015 · 46 views

 

Cheezy Platter: Shaping the edges
By: Don Kleinschnitz Jr.
December 24, 2015 · 38 views

 

Cheezy Platter: Sheer scraping the bottom
By: Don Kleinschnitz Jr.
December 24, 2015 · 47 views

 

Cheezy Platter: Knife glue-up
By: Don Kleinschnitz Jr.
December 24, 2015 · 37 views

 

Cheezy Platter: Final assembly
By: Don Kleinschnitz Jr.
December 24, 2015 · 26 views

 

Cheezy Platter: Turning the knife handle
By: Don Kleinschnitz Jr.
December 24, 2015 · 1,487 views

 

Cheezy PLatter: Cutting the inlays
By: Don Kleinschnitz Jr.
December 23, 2015 · 20 views

 

Cheezy Platter: Adding some bling
By: Don Kleinschnitz Jr.
December 23, 2015 · 37 views

 

Cheezy platter: Getting Started
By: Don Kleinschnitz Jr.
December 23, 2015 · 17 views

Cheezy platter scene 1: Getting Started

 

Cheezy Platter: Bottom sanding
By: Don Kleinschnitz Jr.
December 23, 2015 · 15 views

 

Cheezy Platter: Shaping the bottom
By: Don Kleinschnitz Jr.
December 23, 2015 · 17 views

 

Cheezy Platter: roughing out the blank
By: Don Kleinschnitz Jr.
December 23, 2015 · 19 views

Cheezy Platter: scene 2

 

Cheezy Platter: Final buffing
By: Don Kleinschnitz Jr.
December 23, 2015 · 48 views

 

Wood turning #20 Golden phoenix 13 walnut platter
By: Woodslee Summercraft
December 22, 2015 · 4,681 views

The largest item i've turned on my lathe to date, and the first time i've turned my headstock sideways 90 deg, This piece is inspired by Martin Saban Smith, go check out his channel, after you watch this video of course ;-) Since recording this video I now have over 450 subscriber so I want to thank you. I want to wish you a Merry Christmas and a Happy New Year Martin Saban-Smith's channel https://www.youtube.com/user/workingimage

 

Traditional Irish Platter with Glenn Lucas
By: Glenn Lucas
December 20, 2015 · 26,040 views

This is a short trailer of Glenn's latest DVD/Download available from http://glennlucaswoodturning.com. Runtime 80 minutes. It is packed with useful information showing not just the techniques to make a beautiful platter but techniques than can really improve your bowl turning skills. The tools are colour coded so that you can easily follow which tools are being used as seen in Glenn's Sharpening Techniques DVD and sharpening charts.

 

Minu puidu treimine / My woodturning 2
By: Kunn Power
December 20, 2015 · 226 views

Koostasin selle video YouTube'i videotöötlejaga (https://www.youtube.com/editor)

 

#51 Ashes2Ashes
By: Keith Barrow
December 18, 2015 · 2,075 views

2 contrasting Ash platters A BIG thankyou to all my subscribers!!! www.ukiws.co.uk

 

#154 Plato con inserto efecto nacar
By: Miguel Sanchez
December 14, 2015 · 6,403 views

Ayuda al canal: www.patreon.com/miguelsanchez Insertos buscar por 'Guitar binding' http://www.ebay.com/itm/10-pcs-Celluloid-Guitar-Binding-Purfling-Flame-Strip-Pattern-2-x-1-5-mm-5-Feet-/161361980926?hash item2591ec6dfe:g:rF0AAOSwDk5Tt1gK Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#43 Double Lipped Scorched Cypress Plate
By: Yuval Lahav Woodturning
December 12, 2015 · 3,595 views

In this week's video I'm turning a double lipped scorched rim plate, mainly a decorative item, but I'm a sure a use can be found for it :) Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: The Mind Orchestra - Moonlight The Mind Orchestra - Spirit Walk All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Platter with stone inlay
By: Mauro il tornitore
December 11, 2015 · 700 views

A chestnut platter with a inlay of Jasper powder. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un piatto di castagno con un inserto di polvere di diaspro. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Woodturning a Striped Platter
By: bach thanh
November 22, 2015 · 57 views

 

Plato de garras ( parte 3 )
By: HERRAMIENTALLER 2021
November 13, 2015 · 7,776 views

Plato colocado

 

Plato de garras ( parte 2 )
By: HERRAMIENTALLER 2021
November 13, 2015 · 2,542 views

El plato es chino ovio

 

Plato de garras ( parte 1)
By: HERRAMIENTALLER 2021
November 13, 2015 · 3,379 views

Mi primer plato de garras

 

4 - Turning & Decorating Platters - Dwight Hartsell - 1 April 2008
By: Waxhaw Woodturners
October 29, 2015 · 894 views

Waxhaw Woodturners http://www.waxhawwoodturners.com This video was cut short on the original. Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

wood de bois tournage d une assiette
By: bovitch bov
October 25, 2015 · 6,730 views

wood de bois tournage d une assiette en bois au tour a bois

 

Walnut Plate
By: Inish Woodworking
October 25, 2015 · 140 views

 

Making a Wood Lathe Jam Chuck: Bowl and Plate Bases
By: SP Wood Art
October 09, 2015 · 43,785 views

This video is a step by step process of making a jam chuck for a wood lathe. This particular jam chuck is used for reverse chucking, or finishing the bases of wooden bowls and/or plates; a cheap alternative to purchasing cole jaws, or long worth chucks for wood lathes. This is a fast and simple project to complete. If you would like see more of SP Wood Art visit us at: www.spwoodart.com www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural

 

wood turning a pecan platter with gold leaf
By: Tommy Akridge Designs
September 28, 2015 · 4,219 views

Making a pecan platter with gold leaf

 

Dave Hout Platters part 2
By: Northcoast Woodturners
September 28, 2015 · 337 views

The second part of Dave Hout turning a platter for the North Coast Woodturners September 2015

 

meh 006
By: Bond Hinson
September 27, 2015 · 10 views

Having a little fun on the lathe turning some sugar maple with one hand:)wood was nice and wet, love watching those shavings fly!

 

meh 304
By: Bond Hinson
September 27, 2015 · 9 views

Curly flamed box elder

 

Dave Hout Platters part 1 demo
By: Northcoast Woodturners
September 25, 2015 · 562 views

Dave Hout demonstrates turning a platter for the North Coast Woodturners. Two Part video.

 

How to Turn a Platter Pt 2 of 2
By: Mike Peace Woodturning
September 22, 2015 · 9,363 views

In part 2 I demonstrate hollowing the inside of a platter on a wood lathe using black limba from the Congo. It gets exciting when I develop a hairline crack which causes the platter to shatter while turning! Toward the end of the video you can see a slide show of various platters I have turned. Click here to watch Part 1 of this two part series https://youtu.be/DMWHhMmHafA Check out my blog at MikePeaceWoodturning.blogspot.com for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have for the Gwinnett Woodworkers Association.

 

How to Turn a Wood Platter Part 1 of 2
By: Mike Peace Woodturning
September 22, 2015 · 16,042 views

I demonstrate woodturning a wood platter on a lathe. I mount the blank initially using a woodworm screw so I can finish the bottom. Because of the punky wood I have to switch to a faceplate. I show how to use a shop made tool to cut a dovetail recess on the bottom for chucking to finish the top. Click here to watch Part 2 https://youtu.be/QXHEAfG7VHc Check out my blog at MikePeaceWoodturning.blogspot.com for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers Association.

 

Woodturning Golden Fire Sycamore Platter and First Airbrush Use
By: M. Saban Smith Woodturning
September 14, 2015 · 148,298 views

This week, I show how I created my Nick Agar inspired 'Golden Fire' small platter from sycamore using a dremel, airbrush (which was my first attempt) and gold gilt. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK

 

Permanent Markers and India Ink on a Wood Turned Plate
By: SP Wood Art
August 19, 2015 · 9,466 views

The basic steps involved in wood turning a plate. Additionally, adding color to wood turnings using permanent markers and India ink.

 

Wood turning a small ash platter
By: Jerry Paul
August 07, 2015 · 1,424 views

This piece was an off cut from the log in the previous video... the other side of the log, basically. It wasn't very big, and the bark wasn't really all that great for a natural edge due to the sap wood being a bit punky just beneath it. ... Good tool practice for me!

 

Pepper Tree Bowl/Platter by Al Furtado
By: Rebel Turner
August 06, 2015 · 3,117 views

I tried to make this informative and still cut 3 hours of recording to less than 30 minute video. Please like and share as well as comment. https://www.youtube.com/channel/UCkkxNOUNP8kNT7Gvpc1MjJg https://www.facebook.com/yournamegoeshere2 https://twitter.com/AlbertFurtado57

 

#140 Sapeli y Marino
By: Miguel Sanchez
July 28, 2015 · 12,234 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un plato con unos insertos que creo quedan bastante bien, espero que os gusten. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Naked Turner Blackened White Oak Plate
By: Erik Anderson
July 27, 2015 · 2,901 views

I turn a Blackened White Oak Plate that is 11.5' in Diameter

 

Segmented Yin Yang Platter
By: Carl Jacobson
July 17, 2015 · 285,728 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII I turned this classic Yin Yang design using Maple, Walnut. I segmented the Maple, and Walnut using a bandsaw. I recessed the two dots with a forsten bit, after turning then. It's 14' in diameter, and about 1 1/2' thick. If you make one of these I'd really like to see it, you can always share your project on my website. Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% di

 

Tokar Art 36 WoodTurning Fresh Fruit Poplar Plate
By: Dipa Das
July 15, 2015 · 2,271 views

 

SPSW 077 Turning Segmented Platters Pt 2 Russ Fairfield
By: SPSW Video Library
June 21, 2015 · 669 views

Russ Fairfield demonstrates turning a segmented platter

 

SPSW 060 Platter Turning Coloring Carving Bill Johnston
By: SPSW Video Library
June 20, 2015 · 4,119 views

Just what the Title says.

 

#23 Egg Plate Part 2 - Off Centre - Wood Turning - Acolyte Turner
By: Tom Stratton
May 07, 2015 · 5,990 views

In my latest video, part 2 of 2, I turn an off centre egg plate using a piece of mahogany and the Ruth Niles Off Centre Jig. I'm still an 'acolyte turner', learning the rules as I progress, but I hope to share my journey with you through high quality videos. Thanks for watching! Please consider giving this video a 'thumbs up' and subscribing. Further projects, turnings and information can be found at http://tomturns.com Music from the YouTube Audio Library. Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where exp

 

#22 Egg Plate Part 1 - Off Centre - Wood Turning - Acolyte Turner
By: Tom Stratton
May 07, 2015 · 11,506 views

In my latest video, part 1 of 2, I turn an off centre egg plate using a piece of mahogany and the Ruth Niles Off Centre Jig. I'm still an 'acolyte turner', learning the rules as I progress, but I hope to share my journey with you through high quality videos. Thanks for watching! Please consider giving this video a 'thumbs up' and subscribing. Further projects, turnings and information can be found at http://tomturns.com Music from the YouTube Audio Library. Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where exp

 

Woodturning an Olive Ash Platter with Celtic Pyrography
By: M. Saban Smith Woodturning
May 05, 2015 · 58,608 views

This week, I make a slight return to scorching wood after receiving news from subscriber, Baconsoda (http://www.youtube.com/user/baconsoda) that his interpretation of my Rune Inspired sapele dish from back in November came second in his local turning clubs competition. Update 6 May: Brendan has just posted this video of his bowl: https://youtu.be/70-yHADznyY. Do check it out...it is very good indeed! And, having fairly recently taken up pyrography, I decided to make a new platter...this time 14.5' in diameter incorporating both my scorching technique and new skill of pyrographing my own Celtic

 

Natural Edge Sea Grape Platter by Al Furtado
By: Rebel Turner
May 04, 2015 · 4,812 views

In this video I go trough 2 pieces of sea grape to end up with one piece This piece is unique but by far one of the more challenging pieces I have made. I hope you like it

 

Woodturning Sick Platter
By: Custom Chris
April 27, 2015 · 3,985 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Root Platter by Al Furtado
By: Rebel Turner
April 18, 2015 · 40,081 views

I found this small piece of what looked like the base of a tree or root that had rot in the center and at sometime had lots of new growth around the rot area. When I saw it I knew it had possibilities for a very unique piece. Well you have to watch it and see what developed out of it. https://www.facebook.com/TheRebelTurner

 

Platter Restauration and Abrasive Paste Follow Up
By: Daniel Vilarino
April 18, 2015 · 1,321 views

Hola/Hi! Hay una versión en Español de este Video, por favor chequea mi canal si prefieres ver la misma. ***This video is in English.*** En este video, doy un poco más de información sobre la pasta abrasiva que preparé en el video anterior, también muestro como agregar aceite mineral para hacer la pasta más cremosa y realizo la restauración de un plato (frutero) grande de madera, usando la pasta abrasiva con Trípoli como parte del proceso. ***In this video, I give some more information about the abrasive paste that I prepared in the previous one, I show how to make the paste a bit more creamy

 

Banyan Platter with inclusion by Al Furtado
By: Rebel Turner
April 14, 2015 · 869 views

I had a Banyan blank and it had an inclusion on the top and bottom and I decided to leave the one on the top as part of the bowl/platter as not to make the piece to small. Would you have cut it off?

 

Deconstructed ray platter II
By: weekendturner.com
April 12, 2015 · 1,758 views

The deconstructed look, or ray platter, is part of a series I am working through. Here is my second variation, really a first deliberate attempt at a more organized and symmetric design -- almost Art Deco.

 

Naked Turner 6 Inch Camphor Plates
By: Erik Anderson
April 07, 2015 · 1,975 views

In this Video I turn two 6 inch figured Camphor Plates

 

Naked Turner Ashtray Repair
By: Erik Anderson
March 31, 2015 · 950 views

Repair of a friends antique ashtray.

 

Naked Turner Large Glue Up Platter Episode 2
By: Erik Anderson
February 23, 2015 · 9,899 views

Episode 2 Large 22.5' Glue Up Platter

 

Pentagonal platter time-lapse
By: weekendturner.com
February 22, 2015 · 3,008 views

Turned a pentagonal platter, from some spectacular spalted maple I bought in the fall. (Had to relax after work, in a nice warm workshop.) I've turned square before, but decided to try something different. The angles are a bit of a bear for standard machining, so I used a drawing program to make perfect pentagons with a reliable center point. I cut and taped it onto the blank in the best orientation and cut with a nice wide bandsaw blade. Then used a belt sander to finish the edges before attempting to turn. This time-lapse shot at 1 frame every second, shown at (mostly) 20 fps.

 

Naked Turner Large Glue Up Platter Episode 1
By: Erik Anderson
February 21, 2015 · 2,887 views

Quick video of a glue up I am doing to get ready for a large platter

 

Sapele Mahogany glue-up platter
By: weekendturner.com
February 16, 2015 · 8,098 views

Several months ago I picked up a handful of oddly-shaped Sapele Mahogany cutoffs from the bin at Klingspor Woodworking in Raleigh. They were all wedge-shaped and from various batches of the wood, but for 1- 1.50 each I just had to pick up a handful. After experimenting with several designs, I settled on this fan arrangement with some Avodire veneers I had lying around to highlight the different mahogany grain patterns. I finally got around to gluing up the blank last week, and turning the blank on Sunday at the NC State CraftsCenter -- since my garage was FREEZING. I sanded to just 150 and later added a quick coat of mineral oil to show the grain. I'll sand it further later and finish it with a tongue oil or seal-a-cell. This time-lapse capture is of 5-second intervals. The wood was quite dry so I'm not too concerned about movement.

 

Jewel Trays, despojadores de joyas para Paula
By: Daniel Vilarino
February 15, 2015 · 2,686 views

Hola/Hi! Este video está dedicado a mi esposa, Paula! ***This video is dedicated to my wife, Paula!*** En el mismo he realizado un par de despojadores de joyas para darle el día de San Valentín. ***In it, I made a couple of jewel trays to give her on Valentine's Day.*** El más pequeño es en Cocobolo y el más grande en Arce, con marcas dejadas por las larvas del escarabajo de la Ambrosia. ***The smaller is in Cocobolo and the bigger in Ambrosia Maple.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I

 

Turned & Dyed Oak Platter
By: Gord Rock
February 08, 2015 · 2,650 views

Oak platter turned and dyed with aniline dye.

 

Naked Turner Zebra Wood Plate
By: Erik Anderson
January 24, 2015 · 3,668 views

I turn a Zebra Wood Plate on my Powermatic 4224b

 

Turning a 14 platter from dry oak slab on a 12 lathe
By: Rebel Turner
January 18, 2015 · 35,413 views

This platter was the most challenging wood turning I have done to date. the wood being very dry and it being all end grain pushed my wood turning abilities to my limit. Turning a 14' platter on a 12' lathe sure feels good. Unfortunately I was not able to recover the first CD from my camera.

 

Jimmy Clewes Turns a Colored Rim Platter
By: Mid-Maryland Woodturners Club
January 14, 2015 · 105,875 views

Jimmy turns and colors a figured maple platter at the November 2014 meeting of the Mid-Maryland Woodturners Club in Frederick, MD.

 

#111 Plato laminado 2 - Laminated Platter 2
By: Miguel Sanchez
January 13, 2015 · 38,400 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Ahi va la segunda parte, espero que el resultado os guste, saludos http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#110 Plato laminado 1 - Laminated platter 1
By: Miguel Sanchez
January 13, 2015 · 53,522 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez He dividido en dos el video por su duracion y por poder subirlo a tiempo, la segunda parte estara disponible mañana, gracias por vuestra paciencia. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#109 Plato de centrado - Help centering plate
By: Miguel Sanchez
January 05, 2015 · 21,008 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Otra pequeña ayuda para los segmentados, ya cada vez queda menos. Espero que os guste. Contrapunta: http://www.ebay.com/itm/371198828100?_trksid p2060778.m2749.l2649&ssPageName STRK%3AMEBIDX%3AIT Macho de rosca: https://www.etsy.com/es/listing/121058886/1-by-8tpi-beall-tool-lathe-spindle-tap?ref related-7 http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Chip & Dip Tray Follow up
By: Gord Rock
January 03, 2015 · 2,212 views

Turning a small bowl to use in the Chip & Dip tray rather than getting the tray soiled with dip or Salsa. Chip & Dip Tray Video: http://youtu.be/7X94bcuWbV8

 

Turning a wooden platter with Glenn Lucas Woodturner
By: Glenn Lucas
January 02, 2015 · 49,863 views

This is a short video showing the process of making a simple wooden platter. For more information on the techniques and tools used in this video see http://glennlucaswoodturning.com Director of photography - Nathanael MacDonald . Produced and edited by Glenn Lucas. Filmed using a Canon Eos C100 and Canon 6D

 

Turning A Chip & Dip Tray
By: Gord Rock
December 30, 2014 · 8,935 views

Turning a Chip & Dip Tray from a Maple Bowl Blank

 

Flame Box Elder Plate
By: UBWoodman
December 28, 2014 · 1,138 views

Flame Box Elder Plate I filmed on Dec 24, still working out how to mount the Gopro and edit down to less time. Finished pictures at the end and Thanks for watching, commenting and subscribing. -UBWoodman

 

Woodturning - Raining shavings making a Maple platter
By: Boston Woodturning
December 13, 2014 · 188 views

Woodturning - Raining shavings making a Maple platter! I was testing out my new round nose scraper (out of the box) with this piece of wood.

 

'Flight of Icarus' Wood Turned Wallhanging/Platter
By: Martin's Bazaar
December 03, 2014 · 3,562 views

Hi everyone, Recently, I was voted onto Facebook's arts and crafts emporium page to create, exhibit and sell items on a monthly basis under a given theme. And the theme for December is 'Myths and Legends'. There is a link below to this vibrant and creative community, and I recommend you take a peak at them! Creating this piece was a mammoth task as I was going through processes I had never done before and I am pleased to share this creation video with you. It is available for sale at The Arts and Crafts Emproium on Facebook on 7th December 2014. Take a look over there after you've watched t

 

End Grain Yew Plate / Hirnholzteller aus Eibe
By: Brian Smith
December 01, 2014 · 1,050 views

End grain plate turned from yew wood. / Hirnholzteller aus Eibe

 

Working on an Olive Wood Thin Platter
By: Giorgio Romani Woodturning
October 29, 2014 · 369 views

Giorgio Romani Woodturning - Workshop Live

 

Naked Turner Poplar Platter
By: Erik Anderson
September 14, 2014 · 1,765 views

Poplar Platter

 

Rick Taylor platter wood turning Part 7 - the finished Kauri platter
By: Sue Taylor Dargaville
August 31, 2014 · 788 views

the finished Ancient Kauri Platter,turned by Rick Taylor, Dargaville, New Zealand. www.thewoodturnersstudio.co.nz at his studio. Woodturning tuition, available for 1 day or longer. When are you booking in for a day?.

 

Rick Taylor platter wood turning Part 6
By: Sue Taylor Dargaville
August 31, 2014 · 482 views

Now all we need to do is turn the base then we are finished, The New Zealand Ancient Kauri Platter by Rick Taylor, Dargaville, New Zealand, www.thewoodturnersstudio.co.nz see Part 7 for the finished platter, tuition for 1 day or longer available at Rick's studio

 

Rick Taylor platter wood turning Part 5
By: Sue Taylor Dargaville
August 31, 2014 · 575 views

Rick Taylor - part 5 of the process of turning the ancient kauri platter Sanding and polishing Dargaville, New Zealand www.thewoodturnersstudio.co.nz

 

Rick Taylor platter wood turning Part 4
By: Sue Taylor Dargaville
August 31, 2014 · 437 views

Part 4 of the process of turning the ancient kauri platter by Rick Taylor www.thewoodturnersstudio.co.nz

 

Rick Taylor platter wood turning 3
By: Sue Taylor Dargaville
August 31, 2014 · 751 views

part 3 of turning the ancient kauri platter by Rick Taylor, www.thewoodturnersstudio.co.nz New Zealand

 

Rick Taylor platter wood turning 2
By: Sue Taylor Dargaville
August 30, 2014 · 1,006 views

part 2 making a platter. Ancient Kauri, New Zealand wood turning, Rick Taylor, Dargaville, wedding gift, New Zealand, how to make a platter on the lathe, kauri platter, kauri bowl, platter making, woodturning, wood art

 

Rick Taylor platter wood turning 1
By: Sue Taylor Dargaville
August 29, 2014 · 2,126 views

wood turning by Rick Taylor New Zealand - part 1 turning a New Zealand Ancient Kauri Platter www.thewoodturnersstudio.co.nz Dargaville, Kauri Coast, New Zealand

 

2014.07.17 Woodturning plate ver.2
By: 3earring3
July 17, 2014 · 293 views

 

2014.07.17 Woodturning plate ver.1
By: 3earring3
July 17, 2014 · 129 views

 

Platter project (part 2)
By: WYOMINGWOODTURNER
July 12, 2014 · 2,316 views

Sam completes the figured poplar platter he rough-turned in the first video.

 

Woodturning tangular plate
By: 3earring3
July 06, 2014 · 89 views

 

Woodturning tangular plate
By: 3earring3
July 02, 2014 · 86 views

 

WGNC Demo: Don Leydens turns decorative dinner plates May 8, 2014
By: weekendturner.com
June 29, 2014 · 15,405 views

WGNC member Don Leydens turns 'personality plates' from left-over flat stock at the May 8, 2014 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh.

 

woodturning - making a wood plates (strungar in lemn din Sighetu Marmatiei, Maramures)
By: Gabor Aron Fetyko
June 16, 2014 · 6,238 views

some works of my father see more on: http://www.facebook.com/feticogaboraron

 

Woodturning a Striped Platter
By: Cip's Wood Chips
June 14, 2014 · 165,335 views

Sometimes my eldest daughter brings me laminated pieces of wood from California. These are usually rejected pieces from a man that makes mostly cutting boards and bookends. The initial pieces was 5/4 1 1/4 inch 3 cm.

 

Woodturning Plate (edit) (ver.2)
By: 3earring3
June 13, 2014 · 198 views

https://www.youtube.com/watch?v kqUGyCZqUEc

 

Rough Turning a Platter (part 1)
By: WYOMINGWOODTURNER
June 08, 2014 · 6,275 views

Sam rough-turns a figured poplar platter in part 1 of a two part series.

 

Woodturning - Natural Edge Artistic Raised Platter
By: Kevin Krull
June 06, 2014 · 8,187 views

For this video, I'll be turning an 'artistic' natural edge raised platter. I'm not sure what species of wood I'm turning; it may be Black Locust or it may be a type of Elm. This log came from a log pile so all I have to identify the species with is the log with its loosely attached bark. All of the Elm in my area has been interlocked grain and this wood is definitely not interlocked.

 

WGNC Demo: Liam O'Neill turns a walnut crotch platter
By: weekendturner.com
May 20, 2014 · 22,786 views

Irish artists Liam O'Neill turns a walnut crotch platter in his March 13 demo for the WoodturnersGuild.com of North Carolina. This is the first of 2 projects he turned for the club. Other videos to follow.

 

drechseln eines Holztellers mit Rillenrand [HD]
By: Tiroler Drechsler
May 02, 2014 · 43,356 views

Hallo, in diesem Video drechsle ich einen Holzteller. Er ist aus Wildkirschholz gefertigt, und hat einen Durchmesser von 27cm, und eine Höhe von 7cm. _________________________________________________________ Werkzeuge: Schalenröhre Schaber Rilleneisen Formröhre Schleifpapier Bohrer _________________________________________________________ Website: http://tirolerdrechsler.jimdo.com/ camera: Sony Xperia Go Have fun! \( _ )

 

Woodturning With Naked Turner 9 Inch Sapele Plate
By: Erik Anderson
February 15, 2014 · 3,189 views

Sapele Plate

 

Wood Turning Wine Glass Plates
By: Carl Jacobson
February 07, 2014 · 14,973 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?tracking carl Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#11

 

Turning a Large Platter Part 11
By: windwizard100
January 31, 2014 · 567 views

Finishing up the platter.

 

Turning a Large Platter Part 10
By: windwizard100
January 31, 2014 · 335 views

Shaping the face of the platter.

 

Turning a Large Platter Part 9
By: windwizard100
January 31, 2014 · 396 views

Removing the face of the platter.

 

Turning a Large Platter Part 8
By: windwizard100
January 31, 2014 · 665 views

Mounting the chuck to the foot and truing the bottom of the platter.

 

Turning a Large Platter Part 7
By: windwizard100
January 31, 2014 · 329 views

This continues with shaping of the bottom of the platter through to the sanding.

 

Turning a Large Platter Part 6
By: windwizard100
January 31, 2014 · 448 views

Turning the bottom of the platter.

 

Turning a Large Platter Part 4
By: windwizard100
January 31, 2014 · 716 views

This is a continuation of turning the foot.

 

Turning a Large Platter Part 3
By: windwizard100
January 31, 2014 · 840 views

This section will show how I turn a foot for the bottom of the platter. The foot will be turned with an inside dovetail to accept the teeth for the chuck I will be using.

 

Turning a Large Platter Part 2
By: windwizard100
January 31, 2014 · 1,284 views

In this section we are doing the initial truing process. Pay particular attention on how the cut starts by rubbing the bevel of the chisel and then rotating the chisel till it starts to cut a shaving.

 

Turning a Large Platter 1
By: windwizard100
January 31, 2014 · 2,651 views

This is a detailed description of setting up a large diameter piece of wood for turning a platter. The total process to the completion of the platter takes a considerable amount of time so it will be presented in as close to ten minute segments as I can. Suggestions are always welcome.

 

Turning a Platter Part 2
By: Keith Worswick
January 27, 2014 · 687 views

This video is about Turning a Platter from spalted silver birch. This platter is turned from a piece of very spalted silver birch, although you can't actually tell the species from looking at it! It is actually what most people would consider to be well down the road to being rotted timber, so just turning it using conventional tools (gouges & scrapers) won't work as they just tear the loose fibbers out of the surface of the wood. So lots of sanding is required. I hope you enjoy the video.

 

Turning a Platter Part 1
By: Keith Worswick
January 27, 2014 · 905 views

This platter is turned from a piece of very spalted silver birch, although you can't actually tell the species from looking at it! It is actually what most people would consider to be well down the road to being rotted timber, so just turning it using conventional tools (gouges & scrapers) won't work as they just tear the loose fibbers out of the surface of the wood. So lots of sanding is required. I hope you enjoy the video. Have a look at part 2 to see the finished platter.

 

Wood Turning With Naked Turner%2C Exotic Wood Plate
By: Erik Anderson
January 26, 2014 · 496 views

 

Wood Turning With Naked Turner New Exotic Cake Plate
By: Erik Anderson
January 26, 2014 · 901 views

 

Wood Turning With Naked Turner Macheeche Chip N Dip
By: Erik Anderson
January 26, 2014 · 431 views

 

Turning FOUR PLATTERS Part II
By: WYOMINGWOODTURNER
January 17, 2014 · 5,474 views

Sam Angelo completes his set of Four Platters. He covers the process for accurate duplication in making this set. There are many excellent video segments showing tools and tool work.

 

Turning 4 Platters Part I
By: WYOMINGWOODTURNER
January 16, 2014 · 9,487 views

In the 1st part, same begins the process of duplicating four platters. With a completed piece used as a pattern he shows the process that will be completed in Part II.

 

Piatto per formaggi
By: Livio Maritati
January 06, 2014 · 3,893 views

Costruzione passo passo di un tagliere in mogano e frassino con inserto ceramico con la tecnica del segmentato.

 

# 208 A pin tray for points
By: Cap'n Eddie Castelin
January 05, 2014 · 9,667 views

Make this simple project and earn some big points at home. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

woodturning square plate
By: Цветимир Иванов
December 18, 2013 · 115 views

 

woodturning square plate
By: Цветимир Иванов
December 18, 2013 · 112 views

woodturing квадратна чиния

 

Woodturning With Naked Turner Zebra Plate
By: Erik Anderson
December 14, 2013 · 958 views

 

Turning a Wooden Plate - Mike Ilkiw
By: Woodturners of Southwest Missouri
December 06, 2013 · 10,376 views

Mike Ilkiw with the Woodturners of Southwest Missouri demonstrates how he turns a plate. Along the way he hands out some great tips on turning in general all while using a Jet mini lathe. Visit our club at Woodturnersofswmo.org

 

Square plate
By: Mywoodchips
November 19, 2013 · 44 views

My first try at a square plate.

 

Square plate
By: Mywoodchips
October 31, 2013 · 25 views

I wanted to try to make a square plate with my lathe, I had seen others do it and now I wanted to try it.

 

#46 Torneando platos - Woodturning platters (resubido)
By: Miguel Sanchez
October 23, 2013 · 233,785 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un nuevo proyecto, esta vez de un plato con borde fino, mas truquitos para que sigais progresando. Espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Woodturning Lathe Projects - FLAPPER TEMPLATE
By: WoodChipsCC
August 09, 2013 · 29,116 views

Simple templates eliminate repetition when turning table legs. http://www.productemergence.com

 

Woodturning With Naked Turner Zebra Plate
By: Erik Anderson
August 01, 2013 · 7,031 views

Woodturning Video

 

WGNC demo: Leeland turns square Ikebana June 2013
By: weekendturner.com
July 03, 2013 · 2,866 views

WGNC member and professional woodturner Alan Leeland turns a square Ikebana platter -- a Japanese flower vessel -- at the June 16, 2013 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh.

 

Allanburg Platter # 1411 White Oak
By: Eugen Schlaak
March 11, 2013 · 348 views

The wood for this platter came from the ancient Allanburg White Oakt Tree. The story anout this tree is documented in this presentation

 

WoodTurning - Project turning a Support for Ashtray
By: Confusion Wood
March 02, 2013 · 5,842 views

WoodTurning - Project turning a Support for Ashtray http://www.youtube.com/subscription_center?add_user ConfusionWood my channel: http://youtube.com/ConfusionWood

 

Wood Turning With Naked Turner New Exotic Cake Plate
By: Erik Anderson
January 30, 2013 · 8,552 views

Wood Turning Video

 

KCWTJerry Darter3
By: KCWoodturners1
January 20, 2013 · 500 views

Jerry Darter demonstrates Turning a Platter on the wood lathe at the KC Woodturners Clubhouse on 1-16-2008.

 

Tournage sur bois: plateau de reprise. Woodturning: plateau of recovery.
By: Laurent Cortot
December 29, 2012 · 32,672 views

Fabrication d'un plateau de reprise avec du médium de 20 mn et quelque vis M6. Avec ce simple plateau on peut enlever facilement la prise de mors sur les bols,saladier, assiette etc Mon blog: http://lolotourneur.blogspot.com

 

Tridimensionalità
By: Livio Maritati
December 17, 2012 · 33,225 views

Costruzione di un piatto disponendo segmenti di colore e legno diversi per ottenere l'effetto 3D

 

NEFWA April 2012 - Turning a Platter
By: North East Florida Woodturners Association
October 25, 2012 · 2,197 views

Turning a Platter Demonstration of turning a platter by Gene O'Donnell at the April 2012 meeting of the Northeast Florida Woodturners Association. Gene first talks about expectations from a demonstration and then he demonstrates turning a platter. Unfortunately, while turning the platter, Gene uncovered a defect in the wood and felt it would be unsafe to complete the turning while demonstrating. However, he still covered a lot of the techniques to turning a platter and there is a lot of information in the demonstration.

 

DSCF5343.AVIDesmond Shore's Woodturning
By: Desmond Shore
October 21, 2012 · 183 views

Carved platter and turned hardwood plate.

 

WGNC Demo: Al Stirt carved square platters
By: weekendturner.com
October 17, 2012 · 22,368 views

Premier woodturning artist Al Sirt of Vermont demonstrates his techniques for creating square and carved platters at the October 11, 2012 meeting of WoodturnersGuild.com of North Carolina.

 

Cheese Platter and knife
By: OzWorkshop
October 11, 2012 · 3,425 views

Here is a cheese platter made from beautiful McKay cedar from the Northern regions of Australia.

 

Wood Turning - A Platter from an Oak Burl
By: Mike Waldt
September 17, 2012 · 68,258 views

Wood Turning a Platter from an Oak Burl.

 

Figured maple 10inch diameter platter wood turning projects
By: 207 Made
September 09, 2012 · 6,029 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

Turn and Burn - Part 2
By: OzWorkshop
August 15, 2012 · 1,548 views

Having turned our platter, now its time to burn our flower image.

 

Turn and Burn - Part 1
By: OzWorkshop
August 10, 2012 · 1,408 views

Turning a platter in preparation of doing a Pyrographic image on it.

 

Wood Turning Maple Platter
By: Carl Jacobson
August 01, 2012 · 60,447 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII Oregonburls http://www.youtube.com/user/OregonBurls http://www.facebook.com/#!/OregonBurls Leah Larson http://www.youtube.com/watch?v 1C-eys43EgY&feature plcp I turned a platter out of a Maple burl I got from Oregon Burls. Thank you so much guys what a beautiful piece of wood. If you make this project I'd really like to see it, you can always share your projects on my website. I upload a new project video every Friday. Thank you for supporting free woodwor

 

Little Birds Platter
By: Cap'n Eddie Castelin
July 16, 2012 · 9,526 views

Flip it over and thin out the bottom. And a new tool, or rather, a jig for holding work you can work on.

 

Spanish Cedar Platter - one
By: Cap'n Eddie Castelin
July 09, 2012 · 7,399 views

I start a new decorative platter, a few good moves.

 

Wood Turning With Naked Turner Claro Walnut Plates
By: Erik Anderson
July 08, 2012 · 1,905 views

Wood Turning

 

Turning Oak Burr Platters - Some advice please!
By: Mike Waldt
July 03, 2012 · 3,517 views

This short video is asking for advice on preparing, and methods of finishing, some Oak Burr slabs I've been given.

 

platter embelishment
By: Cap'n Eddie Castelin
July 01, 2012 · 15,413 views

This is it, and a great tip is included.

 

Minis 3 - Miniature Plate
By: charlieb1946
July 01, 2012 · 1,421 views

Miniature plates are easy to turn - as you've seen in the video. This one took less than 10 minutes. Add another minute or two to finish it better and at 10 minutes each, you can turn six or more in an hour - trying different profiles, different foot styles - and different finishes and colors. More on turning miniatures here http://web.hypersurf.com/ charlie2/Turning/Miniatures/Miniatures1.html Comments, suggestions, constructive criticism welcomed

 

platter II
By: Cap'n Eddie Castelin
June 26, 2012 · 14,414 views

This wraps the patter part, next I start decorating it with piercing.

 

Mahogany Platter
By: Cap'n Eddie Castelin
June 24, 2012 · 21,100 views

This platter is the first move in a very complex project for an auction. I have decided to make it into two or more pieces and will get the second part edited as soon as I can.

 

Woodturning With The Naked Turner Old Drawer Face Becomes Square Cherry Plate
By: Erik Anderson
April 02, 2012 · 1,275 views

Turning a square plate

 

Wood Turning With Naked Turner, Hard Rectangular White Oak Plate
By: Erik Anderson
February 21, 2012 · 1,172 views

Wood Turning Video

 

Wood Turning With Naked Turner, Exotic Wood Plate
By: Erik Anderson
February 19, 2012 · 11,825 views

Wood Turning Video

 

Wood Turning a Natural Maple Platter on a Homemade Lathe w/Time-Lapse
By: Getting0Done
January 07, 2012 · 27,278 views

Old Maple piece that was given to me by Rick our plumber and has been sitting around forever and finally decided to turn it. I used my homemade lathe that I built last year that has a 4 foot swing and a 2hp Baldor motor. This is basically what I made it for and if I get enough responses I will do a video on it. I was actually hoping to hollow it out more but came across a problem as part of the bowl would break through. Hope you guys like it and will post again soon. Song: Clash of the Titans Artist: Cameron Stewart

 

Desmond Shore's woodturning 18/12/11
By: Desmond Shore
December 18, 2011 · 141 views

Removing tannan from the bottom of a flat 5inch tray

 

Woodturning a plate
By: 3earring3
December 16, 2011 · 829 views

 

August Turning Demo - Plates Part 3
By: Flatland Woodturners
September 03, 2011 · 4,851 views

Part 3 of our Plate Turning Demo

 

August Turning Demo - Plates Part 2
By: Flatland Woodturners
September 03, 2011 · 6,856 views

Part 2 of Jerry turning a plate (note, the title says part 1, but it is part 2. Sorry about that)

 

August Turning Demo - Plates Part 1
By: Flatland Woodturners
September 03, 2011 · 16,356 views

Jerry Rhoads Demonstrates turning at plate at the Flatland Woodturners August 2011 meeting Part 1

 

Woodturning - Tray
By: teksu313
August 20, 2011 · 4,056 views

Turning a tray from rowan. 8x speed up.

 

Woodturning - Small plate from branch
By: teksu313
August 05, 2011 · 5,415 views

A small plate from rowan branch.

 

Woodturning Plate
By: 3earring3
June 02, 2011 · 2,223 views

 

Wood turning
By: TheWood2saw
May 22, 2011 · 517 views

Trying to turn a plate out of a piece of butcher block

 

Turning an Oak Platter - Segment 3 of 3
By: Bob Hamilton
March 03, 2011 · 9,368 views

This is the third segment of three about turning a small platter or plate from oak.

 

Turning an Oak Platter - Segment 2 of 3
By: Bob Hamilton
March 03, 2011 · 8,627 views

This is the second segment of three about turning a small platter or plate from oak.

 

Turning an Oak Platter - Segment 1 of 3
By: Bob Hamilton
March 03, 2011 · 26,623 views

This is the first segment of three about turning a small platter or plate from oak.

 

mi plato torneado 009
By: PERUTURNER
December 14, 2010 · 1,083 views

 

mi plato torneado 008
By: PERUTURNER
December 14, 2010 · 327 views

 

MVI 4946
By: Arte en Torno
November 30, 2010 · 746 views

 

MVI 4945
By: Arte en Torno
November 29, 2010 · 608 views

 

MVI 4944
By: Arte en Torno
November 29, 2010 · 872 views

 

mi plato torneado 009
By: PERUTURNER
November 26, 2010 · 677 views

 

Imagen,Luneta y cemwenterio y plato gigante 021
By: PERUTURNER
November 10, 2010 · 431 views

24' dish plate of capirona

 

Kurs Werkstatt von Johann Deutsch
By: johann340
March 21, 2010 · 6,321 views

Christian besuchte bei mir einen Intensivkurs, dabei zeigte ich ihm, wie man auf die einfachste Art einen Hut drechselt. Er drechselte auch, einen Lampenschirm mit einer sehr dünnen Wandstärke. In diesem Video bearbeitete er ein Buchenholz mit einer Schüsseldrehröhre. In meiner Drechsel-Kurswerkstätte in 4641 Steinhaus bei Wels biete ich seit 2002 Drechselkurse unter meiner Leitung an. Das Kursspektrum reicht vom Einsteigerkurs über Fortgeschrittenenkurse bis hin zum Naßholz- und Schalendrechseln. Auch Spezialkurse wie zum Beispiel Hohlgefäße mit Alabaster-Steine und Bernstein Drechseln. Diese Kurse sind 1 Personen Intensiv-Kurse, meine ganze Aufmerksamkeit ist auf 1 Person gerichtet. Ich wünsche Ihnen ein schönes betrachten meiner Videos. Mit freundlichen Grüßen Johann Wood Working Woodturning: Finishing & Buffing a Bowl : Walnut Oil Finish for Greenwood Turnings

 

Kurs Werkstatt von Johann Deutsch
By: johann340
March 21, 2010 · 1,367 views

In diesem Video entsteht die Hutkrempe dabei verwendete er eine Schüsseldrehröhre. In meiner Drechsel-Kurswerkstätte in 4641 Steinhaus bei Wels biete ich seit 2002 Drechselkurse unter meiner Leitung an. Das Kursspektrum reicht vom Einsteigerkurs über Fortgeschrittenenkurse bis hin zum Naßholz- und Schalendrechseln. Auch Spezialkurse wie zum Beispiel Hohlgefäße mit Alabaster-Steine und Bernstein Drechseln. Diese Kurse sind 1 Personen Intensiv-Kurse, meine ganze Aufmerksamkeit ist auf 1 Person gerichtet. Ich wünsche Ihnen ein schönes betrachten meiner Videos. Mit freundlichen Grüßen Johann Wood Working Woodturning: Finishing & Buffing a Bowl : Walnut Oil Finish for Greenwood Turnings

 

Kurs Werkstatt von Johann Deutsch
By: johann340
March 21, 2010 · 2,406 views

In diesem Video verwendete Christian ein frisches nasses Eichenholz. ---------------------------Kurs Werkstatt. In meiner Drechsel-Kurswerkstätte in 4641 Steinhaus bei Wels biete ich seit 2002 Drechselkurse unter meiner Leitung an. Das Kursspektrum reicht vom Einsteigerkurs über Fortgeschrittenenkurse bis hin zum Naßholz- und Schalendrechseln. Auch Spezialkurse wie zum Beispiel Hohlgefäße mit Alabaster-Steine und Bernstein Drechseln. Diese Kurse sind 1 Personen Intensiv-Kurse, meine ganze Aufmerksamkeit ist auf 1 Person gerichtet. Ich wünsche Ihnen ein schönes betrachten meiner Videos. Mit freundlichen Grüßen Johann Wood Working Woodturning: Finishing & Buffing a Bowl : Walnut Oil Finish for Greenwood Turnings

 

Using scaper to finnish a 16 plate
By: PERUTURNER
February 03, 2010 · 1,318 views

utucuro plate finishing series

 

utucuru plate 007
By: PERUTURNER
December 16, 2009 · 1,133 views

turning the back of a 20'plate of utucuru wood with a bowl gouge 5/8',the speed is about 700rpm

 

utucuru plate 009
By: PERUTURNER
December 15, 2009 · 330 views

woodturning a 20' plate with the rougth gouge from pennstate ind.

 

Square Plate Segment 4 - Turning the top
By: Bob Hamilton
April 23, 2009 · 6,995 views

This is segment 4 of 7 of a companion video to my pictorial article about turning a square plate which is on my website at: http://bobhamswwing.com/my_woodworking.htm

 

Square Plate Segment 7 - Final sanding and finishing
By: Bob Hamilton
April 23, 2009 · 5,362 views

This is segment 7 of 7 of a companion video to my pictorial article about turning a square plate which is on my website at: http://bobhamswwing.com/my_woodworking.htm

 

Square Plate Segment 6 - Removing the tenon
By: Bob Hamilton
April 23, 2009 · 5,226 views

This is segment 6 of 7 of a companion video to my pictorial article about turning a square plate which is on my website at: http://bobhamswwing.com/my_woodworking.htm

 

Square Plate Segment 5 - Sanding and finishing the top
By: Bob Hamilton
April 23, 2009 · 4,974 views

This is segment 5 of 7 of a companion video to my pictorial article about turning a square plate which is on my website at: http://bobhamswwing.com/my_woodworking.htm I have done some editing to shorten the sanding sequences by removing the dead time while I am changing grits.

 

Square Plate Segment 3 - Sanding the bottom and starting the top
By: Bob Hamilton
April 23, 2009 · 6,231 views

This is segment 3 of 7 of a companion video to my pictorial article about turning a square plate which is on my website at: http://bobhamswwing.com/my_woodworking.htm I have done some editing to shorten the sanding sequences by removing the dead time while I am changing grits.

 

Square Plate Segment 2 - Continuing to work on the bottom
By: Bob Hamilton
April 23, 2009 · 8,120 views

This is segment 2 of 7 of a companion video to my pictorial article about turning a square plate which is on my website at: http://bobhamswwing.com/my_woodworking.htm

 

Square Plate Segment 1 - Working the bottom
By: Bob Hamilton
April 23, 2009 · 17,867 views

This is segment 1 of 7 of a companion video to my pictorial article about turning a square plate which is on my website at: http://bobhamswwing.com/my_woodworking.htm

 

Dave's Lathe Vol.2.wmv
By: David Clevenger
November 10, 2008 · 3,862 views

Wood Lathe Platters

 

Turning Mulbery @ www.turnedoutright.com
By: Don Kleinschnitz Jr.
September 23, 2007 · 45,151 views

Turning mulberry in the www.turnedoutright.com woodturning shop

 

Return to Turning Videos

Powered by Google

Great Bargains


Trend Diamond Abrasive Lapping Fluid

On Sale for only $12.99

Save $2.03

List price: $15.02

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

On Sale for only $32.79

Save $3.65

List Price: $36.44

Click here for more information or to purchase

 


NOVA G3 Reversible Wood Turning Chuck

For only $107.50

Save $52.49

List Price: $159.99

Click here for more information or to purchase


Easy Wood Tools COMBO: Easy Start Rougher, Finisher, Detailer

On Sale for only $145.77

Save $34.20

List Price: $179.97

Click here for more information or to purchase

 


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Sheffield Woodturning
Carter Products
Stainless Steel Bottle Stoppers

(Click any Ad to go to our Sponsor's Website)