Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Potpourri Holders Videos (19)

Sort by

Or click here to: Search All Videos


#22 Yew Potpourri Bowl
By: Andrew Whale
May 14, 2017 · 571 views

Hi This is my first attempt at turning a small potpourri bowl. Also, I've never turned Yew before. The Yew was easy to cut and it was a real pleasure to turn. In the video I've also included some information about the camera and lens I used for close-up detailed work. I hope you like the bowl. If you have any questions or advice, please leave a comment. If you really like my videos, please subscribe to keep informed of new ones. Thanks for watching and happy turning! Cheers. Andrew Note: Video footage was taken using a Sony a6000. All lathe footage was taken using a manually focussed 100mm C

 

A Pot Pourri Pot for Nicola
By: Blind Woodturner
March 10, 2017 · 790 views

This woodturned pot pourri pot has been made from sapele and was created by the Blind Wood Turner. It has a berry design on the pewter lid and was created using the Axminster AT1416VS to make a simple but elegant gift. The use of carbide cutters and the increased power of this woodturning lathe made it a very enjoyable morning in the workshop.. Join Chris, the Blind Wood Turner, in his workshop. After going completely blind in 2008, Chris continually pushes himself to try new woodturning projects on his lathes. The Blind Wood Turner wants the videos to be inspiring and entertaining. Tune in every Friday to catch Chris enjoying and promoting this beautiful art form.

 

Woodturning a Cherry and Lace wood potpourri box Part 3 (The lid)
By: Rebel Turner
August 28, 2016 · 3,317 views

Cherry and Lace wood potpourri droop over box Part 3 This is a full 3 part video with just about no cuts or FF. Part 1 is the body and base. part 2 will be inside hollowing and finish. Part 3 is lid and finalize the foot The Lace wood had some natural worm holes that I kept as a way for the scent to come through. Where to get Yorkshire grit http://yorkshire-grit.com

 

Woodturning a Cherry and Lace wood potpourri box Part 2 (Hollowing)
By: Rebel Turner
August 28, 2016 · 3,826 views

Cherry and Lace wood potpourri droop over box Part 2.. This is a full 3 part video with just about no cuts or FF. First part is the body and base. part 2 will be inside hollowing and finish. Part 3 is lid and finalize the foot The Lace wood had some natural worm holes that I kept as a way for the scent to come through. Where to get Yorkshire grit http://yorkshire-grit.com

 

Woodturning a Cherry and Lace wood potpourri box Part 1 (Body)
By: Rebel Turner
August 27, 2016 · 6,496 views

Cherry and Lace wood potpourri droop over box. I finally got a bit of time to do a little turning. This is a full 3 part video with just about no cuts or FF. First part is the body and base. part 2 will be inside hollowing and finish. Part 3 is lid and finalize the foot The Lace wood had some natural worm holes that I kept as a way for the scent to come through

 

Wood Turning - A Potpourri Bowl & UKIWS Latest!
By: Mike Waldt
May 01, 2016 · 13,948 views

I turn a pot pourri bowl from Walnut and Olive Ash, and also announce some great news about UKIWS. Hampshire Sheen: http://www.hampshiresheen.com/ UKIWS: http://www.ukiws.co.uk/ The second and final part of the Maple bowl turn :) UKIWS website - http://www.ukiws.co.uk UKIWS Merchandise - http://www.ukiws.co.uk/shop/ Guitar by Michael Berk - https://www.youtube.com/user/mikeberk810

 

Como construir una copa y una patena parte 4 de 4 - Arte en Torno
By: Arte en Torno
March 18, 2016 · 3,621 views

Cesar nos muestra paso a paso como hacer una copa y un plato o patena. Madera para la copa, roble. 6 cm de diámetro y 8 cm de altura Madera para el plato, laurel. 1,5 cm de espesor y 12 cm de diámetro.

 

Como construir una copa y una patena parte 3 de 4 - Arte en Torno
By: Arte en Torno
March 17, 2016 · 2,267 views

Cesar nos muestra paso a paso como hacer una copa y un plato o patena. Madera para la copa, roble. 6 cm de diámetro y 8 cm de altura Madera para el plato, laurel. 1,5 cm de espesor y 12 cm de diámetro.

 

Como construir una copa y una patena parte 2 de 4 - Arte en Torno
By: Arte en Torno
March 17, 2016 · 2,251 views

Cesar nos muestra paso a paso como hacer una copa y un plato o patena. Madera para la copa, roble. 6 cm de diámetro y 8 cm de altura Madera para el plato, laurel. 1,5 cm de espesor y 12 cm de diámetro.

 

Como construir una copa y una patena parte 1 de 4 - Arte en Torno
By: Arte en Torno
March 16, 2016 · 2,207 views

Cesar nos muestra paso a paso como hacer una copa y un plato o patena. Madera para la copa, roble. 6 cm de diámetro y 8 cm de altura Madera para el plato, laurel. 1,5 cm de espesor y 12 cm de diámetro.

 

Naked Turner Huon Pine Follow Up Must Watch!
By: Erik Anderson
January 31, 2016 · 2,699 views

I made a lid and finial for the Huon Pine Potpouri Check out Cesar's site at https://www.youtube.com/user/victoracheagos

 

Naked Turner Turns Huon Pine From Australia
By: Erik Anderson
January 24, 2016 · 3,824 views

I turn some Huon Pine from Australia that was sent to me by Les and I make a hollowform small potpouri

 

Woodturning at 54a #30 A pot pourri bowl
By: Keith Barrow
September 07, 2015 · 2,371 views

Description

 

Naked Turner Accidental Potpourri
By: Erik Anderson
February 18, 2015 · 2,170 views

In this video serendipity has her way with me and I make something different than I intended to make.

 

#14 Pot Pourri Follow Up - Wood Turning - Acolyte Turner
By: Tom Stratton
November 12, 2014 · 924 views

Video #14 - A follow up for my first hollow form video, a pot pourri holder, and my new channel graphics by Custom Chris. Custom Chris can be found here: https://www.youtube.com/customchevy03 My previous video: http://youtu.be/vHbd_gy0V_c Further projects, turnings and information can be found at http://tomturns.com Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where explicitly stated. All brand and product names are trademarks or registered trademarks of their respective companies and are hereby acknowledged. Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Tip, Tom Stratton, Turning Tools, Carbide Tools, Bowl Gouge, Spindle Gouge, Roughing Gouge, Tool Sharpening, Sharpening,

 

#13 Hollow Form - Elm Potpourri Holder - Wood Turning - Acolyte Turner
By: Tom Stratton
November 08, 2014 · 8,374 views

Video #13. In this video a create a hollow form pot pourri holder from a piece of elm. This is my first hollow form and I show all the learning issues as I progress. My previous video: http://youtu.be/uW4eeTKB47I Further projects, turnings and information can be found at http://tomturns.com Audio tracks courtesy of YouTube Audio Library. Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where explicitly stated. All brand and product names are trademarks or registered trademarks of their respective companies and are hereby acknowledged. TAGS Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Hollow Form Elm Pot Pourri Pot Pourri Holder Carbide Carbide Tools Carbide Turning Tools

 

Potpourri or is that pottypourri !! container
By: H F Bowern Designs - Harold Bowern
October 16, 2014 · 247 views

Well when they raise a stink, you can make one of these to house the sweet fragrance of potpourri, or is that potty pourri :) This project is a potpourri container I turned from a chunk of Mahogany. I had bought the pewter container top insert at Lee Valley (the adult toy store). Anyways have fun watching! Most of all thanks for watching, I really do appreciate it. Please leave any comments or suggestions, in the comment section below, to help me better my woodworking skills. If you like this video, please click the Like button. If haven't already don't forget to Subscribe to my channel to continue watching more of my videos. You can also visit my website http://hfbowern.com for a view at samples of the work that I have done, other things about me and my obsession with woodworking. A hobby gone out of control !! As always, See you in the Workshop!

 

Turning A Segmented Potpourri Box
By: Steve Lindsley
March 11, 2014 · 28,664 views

In this video I show how I make a segmented potpourri box. The box is made from scrap mahogany and sepele. I used a scroll saw to produce the center section of the lid. The pattern came from a book by Judy Gale Roberts titled 'The Great Outdoors'. I resized the pattern to fit on the lid of the box. It was a fun project and made a great gift for my daughter, Amanda. Questions and comments are always welcome.

 

Pomander Part 1
By: Keith Worswick
January 03, 2014 · 462 views

This video is about Turning a Wooden Pomander that can be used for potpourri, or as I do, as a feature light by putting led christmas lights inside. of both as the leds do warm the pomander slightly and so you can put sented oles on the ball part of the pomander and the warmth will release the sent.

 

Return to Turning Videos

Powered by Google

Great Bargains


Bowl Turner's Tool Rest

On Sale for only $39.99

Save $10.00

List price: $49.99

Click here for more information or to purchase


Pneumatic Swiveling Shop Stool

On Sale for only $35.99

Save $24.00

List Price: $59.99

Click here for more information or to purchase

 


Dust Bee Gone Mask

For only $39.99

Seen elsewhere for $43.99-$49.99

Available in medium, large and x-large)

Click here for more information or to purchase


Pen Press/Drilling Jig

On Sale for only $89.99

Save $10.00

List Price: $99.99

Click here for more information or to purchase

 


Trend® Air Circulating Airshield Pro

On Sale for only $349.99

Save $40.00

List Price: $389.99

Click here for more information or to purchase

 


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Carter Products
Woodturning Online
Woodturning Tool Store

(Click any Ad to go to our Sponsor's Website)