Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Salt Shaker, Peppermills Videos (157)

Sort by

Or click here to: Search All Videos


Adjusting The Pepper Mill Bushings ·
By: Ron Calverley
November 16, 2017 · 287 views

Adjusting The Pepper Mill Bushings

 

Солонка на токарном станке (The salt shaker on the lathe) ·
By: Аleksey Bek
October 20, 2017 · 418 views

Процесс точения деревянной солонки на токарном станке. Форма выбрана произвольная. The process of turning wooden salt shakers on the lathe. The form chosen is arbitrary.

 

The Pepper Mill - Part 20 (conclusion) ·
By: Ron Calverley
October 17, 2017 · 348 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 19 ·
By: Ron Calverley
October 16, 2017 · 279 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 18 ·
By: Ron Calverley
October 15, 2017 · 278 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 17 ·
By: Ron Calverley
October 14, 2017 · 322 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 16 ·
By: Ron Calverley
October 13, 2017 · 329 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 15 ·
By: Ron Calverley
October 12, 2017 · 334 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 14 ·
By: Ron Calverley
October 11, 2017 · 331 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 13 ·
By: Ron Calverley
October 10, 2017 · 378 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 12 ·
By: Ron Calverley
October 09, 2017 · 341 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 11 ·
By: Ron Calverley
October 08, 2017 · 320 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 10 ·
By: Ron Calverley
October 07, 2017 · 435 views

Planning to turn a pepper mill. This will be my first.

 

Woodturning- Spalted Birch and Walnut Pepper Mills ·
By: 207 Made
October 07, 2017 · 284 views

207Made on facebook and Instagram, feel free to leave a comment and subscribe

 

The Pepper Mill - Part 9 ·
By: Ron Calverley
October 06, 2017 · 384 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 8 ·
By: Ron Calverley
October 05, 2017 · 386 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 7 ·
By: Ron Calverley
October 04, 2017 · 404 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 6 ·
By: Ron Calverley
October 03, 2017 · 476 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 5 ·
By: Ron Calverley
October 02, 2017 · 456 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 4 ·
By: Ron Calverley
September 30, 2017 · 609 views

Planning to turn a pepper mill. This will be my first.

 

The Pepper Mill - Part 2 ·
By: Ron Calverley
September 28, 2017 · 595 views

Planning to turn a pepper mill. This will be my first.

 

salt & pepper shakers ·
By: Jon Whateley
September 20, 2017 · 304 views

See how easy it is to make a pair of turned salt & pepper shakers with the right kits. Prokraft heavy chrome salt & pepper shaker kits fit only in the top so are easy to fill and you only need to turn at one end of your blank

 

Turning A Pepper Mill ·
By: Lee Burkholder
September 14, 2017 · 509 views

Cumberland Valley Wood Turners, pepper mill, turning a pepper mill, turning, wood turning, turning,

 

Wood Working- Burnt Oak Pepper Mills ·
By: 207 Made
September 08, 2017 · 56 views

207made on facebook and instagram

 

The Pepper Mill - Part 1 ·
By: Ron Calverley
August 30, 2017 · 687 views

Planning to turn a pepper mill. This will be my first.

 

Wood Turning - Swivel Lid Salt Holder Follow Up! ·
By: Mike Waldt
August 28, 2017 · 5,783 views

I go through some alternate methods of lining up the holes to be drilled in the lid and body of the box to accept the pivot rod. Thanks for all the other suggestions too :) Keith Barrow's Web site: http://www.woodturningat54a.com/ Keith's YouTube Channel: https://www.youtube.com/user/kasbarrow Harrogate Show Website: http://www.skpromotions.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk/ Makers Central YouTube Channel: https://www.youtube.com/channel/UCJSr... Makers Central website: http://www.makerscentral.co.uk/ NZ Woodturning: https://www.youtube.com/channel/UC3-0...

 

Vintage style peppermill ·
By: Fatso's Workshop
June 25, 2017 · 157 views

I finally got around to replacing the squeaking plastic pepper grinder we've had for years. The timber is Chinese Elm, which is one of my favourite decorative park trees. Music: Beautiful and Young - Break The Bans licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

 

How To Make A Crushgrind Pepper Mill / Woodturning Projects ·
By: Carl Jacobson
June 12, 2017 · 2,824 views

This is an older video I did for Craig at Chefwarekits. I used a Robert Sorby Crushgrind recess groove cutting tool to make the inside groove that locks the Crushgrind kit in place. Chefwarekits: http://www.chefwarekits.com/ I upload a new project video every Friday, and I'm live on Twitch Check out my Twitch channel. https://www.twitch.tv/carljacobson Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 My Etsy shop: https://www.etsy.com/shop/Thewoodshoptv Patreon: https://www.patreon.com/CarlJacobson Website http://www.thewoodshop.tv/ Instagram: h

 

How to put together Salt and Pepper Grinder Kits ·
By: Olivers Woodturning
April 20, 2017 · 969 views

This is a quick video showing how to put together the salt and pepper grinders from our Project Accessories range. As the kits don't include any printed instructions on how they go together this shows how they should look inside your turned wooden outer.

 

Woodturning Curly Modern Pepper Grinder ·
By: SG Art Turning
April 15, 2017 · 7,175 views

Email : simgadoury@gmail.com You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning/ Patreon : https://www.patreon.com/sgartturning

 

Wood turning - First time turning Salt Miller (Hazel wood) ·
By: CraftWithAfshin
April 13, 2017 · 448 views

Hi everyone today i decided to do something new which i haven't done before, Salt miller is probably the most common thing wood turners make but Its really not simple since it has to be right size for the miller you buy. I think for first time i did alright let me know what you guys think and thank you all for watching I appreciate it.

 

Roberts Drechselbude - Pfeffer- & Salzmühle ·
By: Robert S.
April 10, 2017 · 668 views

Heute mal was zum ganz klein machen. Ich habe die Bausätze ohne Anleitung bekommen, so musste ich mir vorab einen Plan zeichnen und ein 'Null-Stück' aus billigem Fichtenholz machen. Und dann heißt es nur noch, Bohren und Messen, Messen und Bohren, ......... Robinienholz ist nicht ganz so einfach zu drechseln. Das nächste mal nehme ich eher Kirsche oder Buche. Das Mahlwerk für die Pfeffermühle ist aus Metall, das für Salz aus Kunststoff. Beides funktioniert bestens. Wird ein Geschenk zu Ostern.

 

Resin Wave Grinder ·
By: Brendan Stemp
April 03, 2017 · 9,173 views

How I make my Gumnut Grinders with a wave pattern. I use the Crushgrind mechanism for this project.

 

Woodturning And Coloring Pepper Mill ·
By: SG Art Turning
March 25, 2017 · 10,638 views

Patreon : https://www.patreon.com/sgartturning You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Email : simgadoury@gmail.com Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

Woodturning Burl Antique Pepper Grinder ·
By: SG Art Turning
March 14, 2017 · 22,392 views

Patreon : https://www.patreon.com/sgartturning You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Email : simgadoury@gmail.com Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

Woodturning Flame box elder pepper mill ·
By: SG Art Turning
March 13, 2017 · 308,879 views

Patreon : https://www.patreon.com/sgartturning You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Email : simgadoury@gmail.com Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

Woodturning Ambrosia Pepper Mill ·
By: SG Art Turning
March 08, 2017 · 5,123 views

Patreon : https://www.patreon.com/sgartturning You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Email : simgadoury@gmail.com Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

Woodturning an Antique Style Maple Pepper mill ·
By: 207 Made
March 08, 2017 · 290 views

https://www.facebook.com/207-Made-112917125483794

 

Step by Step Tutorial, Salt and Pepper Mills, classic mechanism ·
By: Daniel Vilarino
January 21, 2017 · 1,211 views

Hola/Hi! Este video está en Inglés. Si prefieres verlo en Español por favor haz un click en el siguiente enlace: https://youtu.be/-falIMPh1bc ***This video is in English*** Este video contiene un instructivo paso a paso para el torneado y ensamblado de un molinillo de sal y uno de pimienta. ***This video is a step by step tutorial for the turning and assembling of a salt and a pepper grinders.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, pleas

 

pepper mill kit 10" ·
By: Jon Whateley
January 17, 2017 · 871 views

Watch how easy it is to make a turned pepper mill with the Prokraft easy-fit salt and pepper kits. Make super wooden gifts for friends family and customers. these kits are available here: http://www.prokraft.co.uk/bar---kitchen-kits.html

 

Woodturning Segmented Pepper Grinder ·
By: Le PicBois
January 16, 2017 · 13,092 views

[ This is a collaboration video. Be sure to watch the first part of the build on Paul Jackman's channel before: https://www.youtube.com/watch?v rK0uZvENV5s&feature youtu.be ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois __________________________________________________ Thanks to ALL my supporters on Patreon: Alain Gaudet, Alain Lebarbé, Benoit Pelletier, Brandon

 

Turning A Star Wars BB-8 Pepper Mill ·
By: Carl Jacobson
December 23, 2016 · 10,675 views

Star Wars BB-8 droid pepper grinder/mill. The Force Awakens was the first Star Wars movie BB-8 appeared in. I turned this BB-8 pepper grinder on the lathe out of Myrtlewood. My wife painted it, and I finished it with a clear lacquer. I rough cut the pieces on a band saw before turning them on the lathe. I upload a new project video every Friday, and I'm live Monday, Wednesday, and Friday. Check out my Twitch channel. https://www.twitch.tv/carljacobson Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Tha

 

Turning a Grinder My Way # 58 ·
By: The Wood Whirler
December 14, 2016 · 2,242 views

I turn 9 Pepper/salt grinders, doing it my way.

 

Finishing bottom of threaded box ·
By: Adam Woodturner
November 21, 2016 · 197 views

Salt shaker threaded box

 

How to Turn a Crushgrind Mill ·
By: Craft Supplies USA
November 14, 2016 · 59,960 views

Learn how to turn a Custom Crushgrind Salt/Pepper Mill. Shop now: https://www.woodturnerscatalog.com/p/53/1264/CrushGrind-Mill-Mechanism?utm_source youtube&utm_medium description&utm_campaign videos View article: http://blog.woodturnerscatalog.com/2016/11/turning-a-crushgrind-mill/ Subscirbe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Enjoy the flavor and aroma of fresh ground pepper, spices and salt with a CrushGrind Mill Mechanism in your handcrafted mill. Unlike traditional mills, this unique type of mill mechanism allows you to trim the shaft to any length for ultim

 

Woodturning Salt and Pepper Shakers ·
By: Mike Peace Woodturning
November 11, 2016 · 13,683 views

I demonstrate how to turn a salt or pepper shaker in this fun, easy beginner woodturning project. It is essentially a small box. I make the salt shaker of white oak and the pepper shaker of walnut. I add liming wax to the salt shaker. I got the idea from Richard Raffan’s book All New Woodturning Projects. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Making a Peppermill part 1 ·
By: mark's creative turnings
November 09, 2016 · 468 views

This is a video on making a wooden Pepper-Mill from Maple. Then there will be part 2 coloring the Pepper-Mill ! I saw this coloring technique on Gary Lowe's Channel. Gary's channel is https://youtu.be/ahVZtZKqnPY

 

Le PicBois - How To Make A Broken Pepper Mill ·
By: Le PicBois
October 15, 2016 · 3,696 views

[ How to make a broken pepper mill using maple, walnut & casting resin? ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois To see real good projects with casting resin, take a look at Peter Brown's channel: https://www.youtube.com/user/kludge1977 Click here to see me fail again: https://www.youtube.com/playlist?list PLZRVigfaa0LflNe0A9aeDUPDF8iK_bH3J I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: Tip Cup: https://www.paypal.me/lepicbois

 

Combo Salt Shaker & Pepper Mill ·
By: BayLake Woodturners
October 15, 2016 · 349 views

Video note: There are some bad spots in the video ... they are in the original DVD media, and could not be removed. BayLake Woodturners member Pete Schuh starts with a mahogany blank and produces a finish-ready combination salt shaker and pepper mill ... in less than an hour! Recorded live October 15, 2016 at the NWTC Artisan Center, 1417 Cedar St, Green Bay, WI 54302

 

Turning a Red Box Elder Pepper Mill ·
By: 207 Made
September 20, 2016 · 452 views

https://www.facebook.com/112917125483794/photos/a.625999997508835.1073741832.112917125483794/977062102402621/?type 3&theater

 

Turning a Crushgrinder with a wobble# 47 ·
By: The Wood Whirler
September 13, 2016 · 2,726 views

This is what I was doing when I figured out new Grizzly wobbled.

 

Turning A Pepper Mill ·
By: Lee Burkholder
September 07, 2016 · 2,952 views

Cumberland Valley Wood Turners, Turning a pepper mill, pepper, turning, lathe, wood turning, pepper mill,

 

Segmented antique peppermill ·
By: Keith's Woodwork
August 09, 2016 · 1,668 views

Here i made an antique peppermill using 4 different species of wood. The end result has a segmented look to it and is really easy to create.

 

Recycled-Fencepost Grinder ·
By: Brendan Stemp
July 26, 2016 · 8,935 views

I recycle an old, weathered fencepost by stabalizing it in clear epoxy resin and then turning it into a pepper grinder. The resin used is Solid Solutions 606. See: http://www.solidsolutions.com.au/view_products.php?cat 6

 

Chili pepper shaker on the lathe ·
By: Mauro il tornitore
July 08, 2016 · 433 views

Un distributore di peperoncino habanero di tasso al tornio. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. A chili pepper shaker of yew on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks.

 

Salt- and Pepper-Grinder ·
By: PeteTGIF
July 04, 2016 · 2,208 views

This time I turned a Salt- and Pepper-Grinder from Walnut and Zebrano. Sorry for the late video, but I'd been busy the last couple of weeks and had Paul Willmore and his lovely wife over for a night as they'd been on their way to Latvia. Please leave a comment, as I don't think that I'd recommend Zebrano as a good wood for spindle turning. I'd like to learn about your experience. -------------------------------------------------------------------------------- Contact informations for Paul Willmore: Facebook: https://www.facebook.com/willmoresworld and: https://www.facebook.com/paul.willmore Yo

 

Madrone Burl ·
By: Trent Thornton
June 15, 2016 · 13 views

 

Spalted Silver Maple ·
By: Trent Thornton
June 15, 2016 · 10 views

 

Cottonwood ·
By: Trent Thornton
June 15, 2016 · 5 views

 

Spalted Silver Maple 2 ·
By: Trent Thornton
June 15, 2016 · 5 views

 

Don Smith demonstrates cutting threads and flutes ·
By: Mid-Maryland Woodturners Club
June 14, 2016 · 1,830 views

In the June 2016 meeting of the Mid-Maryland Wood Turners Club, Don Smith demonstrates how to cut threads in wood with a tap and die set, and also demonstrates how to cut decorative fluting; both are steps used to make a pepper mill.

 

Spalted Silver Maple ·
By: Trent Thornton
June 06, 2016 · 7 views

 

Spalted Silver Maple 2 ·
By: Trent Thornton
June 06, 2016 · 7 views

 

Cottonwood ·
By: Trent Thornton
June 06, 2016 · 6 views

 

Johnny McCarthy Woodturning ·
By: Michael McCarthy
May 25, 2016 · 274 views

This video is about woodturning salt & Pepper mills

 

Johnny McCarthy Woodturning ·
By: Michael McCarthy
May 21, 2016 · 12,535 views

This video is about Johnny McCarthy Woodturning

 

Making Smarts Peppermill Part 1 ·
By: As The Wood Turned
April 09, 2016 · 402 views

Peppermill from Maple and Cherry for Curtis and Angie

 

Making Smarts Peppermill Part 2 ·
By: As The Wood Turned
April 08, 2016 · 257 views

Part 2 - Making a peppermill for Angie and Curtis Smart

 

Turning Peppermills - Larry Randolph ·
By: Woodturners of Southwest Missouri
April 06, 2016 · 12,358 views

Our own Larry Randolph shares how he selects wood, plans the design and the process of how he turns peppermills. The purpose of this demo is to prove that a peppermill doesn't have to be a difficult project. This mechanism can be found from Craft Supplies USA or at: https://www.woodturnerscatalog.com/p/53/5244/Turners-Select-Deluxe-Pepper-Mill-Kit The Woodturners of SW MO can be found on this YouTube channel and also at www.woodturnersofswmo.org.

 

Naked Turner Quick Look At A Magic Salt Shaker ·
By: Erik Anderson
April 05, 2016 · 1,886 views

This is a quick video of a magic salt shaker I made. Here are the plans http://peaceriverwoodturners.org/PRWI/RESOURCES_files/Magic%20Salt%20Shaker.pdf

 

As The Wood Turned, Peppermills by Deb - How we got here ·
By: As The Wood Turned
April 04, 2016 · 367 views

Deb and I talk about As The Wood Turned and our general design learnings from years turning peppermills, etc.

 

Turning a Salt Canister ·
By: Craft Supplies USA
March 31, 2016 · 34,986 views

How to turn a Salt Canister - Inspiration Series. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos Instructional article: http://blog.woodturnerscatalog.com/2016/03/salt-canister/ Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Learn to turn a small canister designed for holding salt, sugar or any other ingredients used in the kitchen. I use a canister almost every day when cooking, and it makes a great table decoration. The purpose of our Inspiration Series is simply to showcase the beauty of woodturning

 

Salt/Pepper All-in-One ·
By: Carl Jacobson
March 07, 2016 · 6,213 views

In this video I turned a pepper mill. Here's a link to some of the tools I used in the videos, http://astore.amazon.com/thewood0c-20 I upload a new video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more than happy to help. Robust Woodturning Tools! http://www.turnrobust.com/ Easy Wood Tools http:

 

Pepper Mill/Salt Shaker Combo ·
By: Carl Jacobson
March 04, 2016 · 11,882 views

Turned pepper mills make great gifts. George at Backgate Industries came up with this cool pepper mill/salt shaker combo design, you can find the kits at the link below. If you make this project please share, you can always share your project on my website too. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and o

 

Pepper Mill/Salt Shaker Combination Kit ~ Turning Demonstration ·
By: Peter Matthew
February 26, 2016 · 2,823 views

This video covers the turning of a pepper mill/salt shaker kit from Backgate Industries. Buy the kit: http://www.arizonasilhouette.com/prod... Backgate Industries: http://www.backgateindustries.com ----------------------------------------­-------- My website: www.peterturnswood.com ----------------------------------------­- My vlog channel: https://www.youtube.com/channel/UCiST... ----------------------------------------­--------------------------------------- If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

IKI Woodturners Pepper Mill Demonstration with Carlos Kell ·
By: IKI Woodturners
February 23, 2016 · 1,346 views

IKI Woodturners Club presents a demonstration of turning a pepper mill featuring Carlos Kell from the November 8th 2015 meeting.

 

The Multi Axis Grinder ·
By: Brendan Stemp
February 11, 2016 · 7,753 views

This project is a variation on the grinder theme. It takes the Crushgrind mechanism and is turned on 3 axes. It makes a very interesting shape and is comfortable to use.

 

3 - New Stickers! Bench Grinder Stand and Pepper Mill Chucky Follow-up ·
By: Peter Matthew 2
January 17, 2016 · 67 views

This is the follow up the the bench grinder stand and the pepper mill chucky videos. Note: This is my vlog channel. I only upload videos where I talk and open stickers. If you want woodworking, go to my other channel: https://www.youtube.com/channel/UCMCVIk6zuSQNsbhdcPhfiBA ------------------------------------------------------------------------------------------------------ If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080

 

Pepper Mill Chucky Demo ~ Rubber Chucky Products LLC ·
By: Peter Matthew
January 15, 2016 · 494 views

Pepper Mill Chucky: http://www.rubberchucky.com/store/p18/Pepper%2FSalt_Mill_Chucky.html The Pepper Mill Chucky comes with a MT2 Chucky arbor, the pepper mill arbor, and two purple chuckies. Rubber Chucky Products: http://www.rubberchucky.com ---------------------------------------------------------------------------------------------------------------- This week I demoed the pepper mill chucky from Rubber Chucky Products LLC. It's a real neat little jig and helps a lot while turning a pepper mill. I turned a six inch pepper mill from cherry wood. -------------------------------------------

 

Woodturning a Mahogany Pepper Mill ·
By: Ndwoodworks
December 26, 2015 · 2,069 views

Timelapse video of the process of making a pepper mill Thanks for watching! Next video will be turning a Ambrosia Maple bowl Find me on Etsy at //www.etsy.com/shop/ndwoodwork?ref hdr_shop_menu

 

Woodturning with Tim Yoder-The Grinder ·
By: woodturningwithtim1
December 06, 2015 · 3,353 views

In Episode 16 of Season 2, go to the other side of Tim’s shop to learn all about the grinder. Watch how to properly set-up a grinder and learn techniques for setting up your wheel including checking for balance and trueness. Also learn to dress your wheel with a diamond point. Watch it now at www.popularwoodturning.com

 

61- Pepper Mill - Jack Reyome - 3 June 2014 ·
By: Waxhaw Woodturners
November 04, 2015 · 2,643 views

Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video recorded and edited by Daniel Brinneman. http://www.lionsdendesigns.com

 

Video #2 - Pepper Grinder ·
By: AnkleBiter Woodworks
November 03, 2015 · 129 views

In this video I demonstrate how I made an antique pepper grinder from a spindle of Norfolk Island Pine. As always, questions and/or comments are welcome! Don't forget to subscribe. Visit our Etsy Store: https://www.etsy.com/shop/AnkleBiterWoodworks Like us on Facebook: www.facebook.com/anklebiterwoodworks Visit our website and see our gallery at www.anklebiterwoodworks.com

 

Christmas gifts #1 Bubinga crush grind peppermill ·
By: H F Bowern Designs - Harold Bowern
October 27, 2015 · 1,514 views

Well this week I start on my Christmas list. First up is a crush grind peppermill. I have never turned this type of peppermill, and it was a bit of a learning curve. The blank was a bubinga 3' x 3' x 12'. -Finished height is 10 1/4' and approx 2 1/2' round mid section and 2 5/8' base The one thing that I found interesting was the instructions were in imperial yet the mechanism was made to match metric. Next time I will see if I can figure out the measurements so that I don't have to remove the tabs from the mechanism. The finish is the Doctor's Workshop Walnut Oil and Wax. Thanks again f

 

The Lighthouse Grinder Part 3 ·
By: Brendan Stemp
October 11, 2015 · 3,837 views

The final part of this series. I look at the shaping of the lens house. Included, a first time for me, is some sound effects.

 

The Lighthouse Grinder Part 2 ·
By: Brendan Stemp
October 05, 2015 · 3,362 views

Part 2 looks at how the lens room section of the lighthouse is constructed. The final shaping of the lens room will be shown in Part 3. Part 1 shows the shaping of the base.

 

Lighthouse Grinder Part 1 ·
By: Brendan Stemp
September 28, 2015 · 3,524 views

The first version I uploaded was poor in quality and had 10mins. of sweet nothing. Here is a better version. I show how I made a Crushgrind Lighthouse Pepper/Salt Grinder. I make reference to this video: https://www.youtube.com/watch?v oVQWy2XyNOc

 

The Lighthouse Grinder Part 1 ·
By: Brendan Stemp
September 28, 2015 · 3,113 views

I show how I make my Lighthouse Crushgrind grinder. The whole project took too long to do in one video. The next two parts will be uploaded soon. This video: https://www.youtube.com/watch?v oVQWy2XyNOc is the one I refer to and describes how to size timber on the lathe.

 

Making Antique Style Pepper Mills from Antique Brass and real wood ·
By: Abston Wood Crafts
September 13, 2015 · 1,641 views

https://www.etsy.com/shop/AbstonWoodCrafts?ref hdr_shop_menu These antique style pepper mills are fun to make. Please visit my shop to see currently available stock.

 

Woodturning a pepper mill ·
By: 207 Made
June 02, 2015 · 303 views

Woodturning a pepper mill https://www.facebook.com/207-Made-112917125483794

 

Naked Turner Quick View of New Peppermill ·
By: Erik Anderson
April 03, 2015 · 913 views

In this video I show a peppermill that I made, if you want to see how I made it here is a link to another video I did about how to make a peppermill. I have som other videos on peppermills I have made as well. https://www.youtube.com/watch?v C_YVfqjQdjs

 

Making an Antique Pepper Mill ·
By: Abston Wood Crafts
March 22, 2015 · 789 views

Please visit my online store: https://www.etsy.com/shop/AbstonWoodCrafts?ref hdr_shop_menu Blog: http://abstonwoodcrafts.com/ Facebook: https://www.facebook.com/KentuckyWoodCrafts

 

Antique style brass finish peppermill mechanism version 1 ·
By: H F Bowern Designs - Harold Bowern
January 20, 2015 · 2,911 views

Today I am making a peppermill from a kit I purchased William Wood-Write http://www.penblanks.ca/home.php. The version I am making today is a very simple one, using a block of bubinga 3' square by 5' as that is what I have on hand. The instructions call for block of either wood or acrylic, with minimum dimensions of 2 1/2 ' square and 4' long. Thanks again for watching, I really do appreciate it. If you like this video, please click the 'Like' button. If haven't already don't forget to click the 'Subscribe' button, to continue watching more of my videos. You can also visit my website, http://hfbowern.com , where you will find samples of my woodworking projects, my BLOG, and other things about me and my hobbies. If you would like to follow my gardening projects on YouTube, you can find me at my YouTube gardening channel at https://www.youtube.com/user/TheOldWoodworker As always, bye for now, and I hope to see you on down the road!

 

Antique Copper Peppermills Part 3 - Molinos de Pimienta Antiguos Parte 3 ·
By: Daniel Vilarino
January 17, 2015 · 5,439 views

Hola/Hi! Este es el tercer y último video de la serie de molinos de pimienta estilo antiguo, en el cual ensamblo los cabezales a los cuerpos que había torneado anteriormente. ***This is the third and last video of the series in which I assemble the hardware of the antique style peppermills to the wooden bodies I turned before*** Ojalá que hayan disfrutado de este episodio y si fue así, por favor realicen comentarios, denle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this episode and if that was the case, please make comments, give it a 'like' and subscribe to my channel.**

 

Antique Copper Peppermills Part 2 Molinos de Pimienta Antiguos Parte 2 ·
By: Daniel Vilarino
January 16, 2015 · 4,708 views

Hola/Hi! Este es el segundo video de la serie, en el cual torneo los cuerpos de tres molinos más en palo morado (purple heart), bocote y hormigo negro (orange agate). ***This is the second video of the series in which I turn the bodies of three more peppermills in purple heart, bocote and orange agate (hormigo negro).*** Ojalá que hayan disfrutado de este episodio y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this episode and if that was the case, please make comments, give it a 'like' and subscribe to my channel.*** Si por

 

Antique Copper Peppermills Part1 Molinos de Pimienta Antiguos Parte 1 ·
By: Daniel Vilarino
January 14, 2015 · 8,361 views

Hola/Hi! Ojalá que hayan disfrutado de este episodio y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this episode and if that was the case, please make comments, give it a 'like' and subscribe to my channel.*** Si por algún motivo no les gustó, o hay algo que se pudiera hacer mejor, por favor también comenten. Siempre hay que tratar de mejorar! ***If for any reason you did not like it, or there is anything that I could do better, please let me know. There is always room for improvement!*** La música fue obtenida de sitios sin regalías que permiten su uso en videos. ***The music was obtained from a royalty free sites that allows its use in videos.*** From/de: www.looperman.com 'Sombra' 40A From/de: www.jamendo.com 'Going Up', 'Big Dreams' & 'Dreams of Flying' Jason Pfaff Muchas Gracias!! ***Thank you so much!!*** Salud!! ***Cheers!!*** Daniel

 

Making a Grinder Pt 3 ·
By: Brendan Stemp
January 02, 2015 · 12,819 views

This is the final part in this series of making a Crushgrind grinder. In this video I look at making the knob. Most tools used to make this grinder can be found at http://youturn.tv

 

Woodturning a Salt Cellar Box ·
By: Walter Wager
December 30, 2014 · 6,148 views

Video shows how to make a box with a magnetic lid, used by cooks to hold salt (or other spices) used in preparing food.

 

Making a Grinder Part 2 ·
By: Brendan Stemp
December 19, 2014 · 12,650 views

The Crushgrind grinder project continues. Part 2 looks at the shaping of the base.

 

WOODTURNING PEPPERMILL ·
By: Peter Matthew
December 13, 2014 · 1,016 views

 

Making a Grinder Part 1 ·
By: Brendan Stemp
December 12, 2014 · 20,392 views

This video looks at the making of a grinder that takes the Crushgrind mechanism. It has been broken up into 3 parts and in Part 1 I show how to prepare the blank and drill the appropriate holes.

 

Making Pepper and Salt mills for the Tempe Festival of the arts show Dec. 5-7th 2014 ·
By: Gerard Merchant
November 30, 2014 · 31 views

Pepper and Salt mills for the Tempe Festival of the arts show Dec. 5-7th 2014. Just finishing up our new mills.

 

Turning Salt and Pepper cellers ·
By: WYOMINGWOODTURNER
November 19, 2014 · 4,248 views

Sam Angelo demonstrates turning a salt and a peper celler. This is a simple small end grain bowl that anyone can do.

 

Naked Turner Turns New Pepper Grinder New Ideas ·
By: Erik Anderson
November 18, 2014 · 8,274 views

My second Pepper Mill using a click in grind mechanism from Craft Supplies USA

 

Naked Turner Peppermill Follow Up ·
By: Erik Anderson
October 13, 2014 · 1,462 views

Peppermill Follow Up

 

Naked Turner Turns Pepper Mill ·
By: Erik Anderson
October 12, 2014 · 8,336 views

I turn a peppermill with a crush grind mechanism from Craft Supplies USA

 

Maple Burl Pepper Mill............300th Video ·
By: Carl Jacobson
September 30, 2014 · 14,095 views

This is a great beginner project, the whole project takes less than an hour. Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_menu Thank you for supporting free woodworking videos https://www.paypal.com/cgi-bin/webscr?cmd _s-xclick&hosted_button_id 7MQRX83KCLJBA My Q&A Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning Just Add Salt ·
By: Custom Chris
September 05, 2014 · 19,184 views

Needed a salt shaker so I made a segmented one. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Turning Pepper Mills ·
By: DentonTurners
August 07, 2014 · 19,134 views

Jimmie Gill visits us and demonstrates his techniques and tips for turning a pepper mill on the lathe. Thank you to Jimmie for visiting the club and passing this knowledge along!! This was recorded at the August 2014 meeting of the Golden Triangle Woodturners in Denton Texas. We meet the first Monday of each month at 7PM in the Center for the Visual Arts located at the corner of Hickory and Bell streets in Denton, Texas. http://www.goldentrianglewoodturners.org

 

Wood turning: Salt & pepper mills ·
By: Hendrik van Taak
August 03, 2014 · 2,458 views

A Demonstration of how to make spice mills on a copier lathe

 

{$v} ·
By: Цветимир Иванов
July 23, 2014 · 1,123 views

 

Pepper Mill Makers Kit and DVD ·
By: Ron Brown
July 21, 2014 · 679 views

Short introduction to Ron Brown's Best Salt and Pepper Mill Makers Kit with full length how-to step-by-step DVD. More info at www.ronbrownsbest.com

 

Pepper Mill Follow Up ·
By: Carl Jacobson
June 16, 2014 · 5,020 views

This is the follow up video to the pepper mill I made last week. The Tiny Trailer Workshop https://www.youtube.com/channel/UClek5Vj9XQWnQQQB73uAaRQ/featured ChefwareKits https://www.chefwarekits.com/?tracking carl My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Salt and Pepper Mill ·
By: Carl Jacobson
June 13, 2014 · 14,087 views

I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?tracking carl Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I star

 

Turning an Antique Pepper Grinder Pt2 ·
By: Woodcraft of Spokane
April 26, 2014 · 2,175 views

This is segment 2 in our 2 part series titled Turning an Antique Pepper Grinder (or mill). Joel shows how quick and easy it is to prep, turn and finish a great little addition to the kitchen or dining room table setting. Did we mention what a great gift idea these are? Items used in this demonstration include: 154182 - Antique Hand Crank Pepper Grinder Kit Mechanism 145706 - WoodRiver 1/2' x 4' Forstner Bit Extension 125935 - 1' Forstner Bit 149927 - Full Size Easy Finisher (Easy Wood Tools)

 

Turning an Antique Pepper Grinder ·
By: Woodcraft of Spokane
April 25, 2014 · 4,035 views

This is segment 1 in our 2 part series titled Turning an Antique Pepper Grinder (or mill). Joel shows how quick and easy it is to prep, turn and finish a great little addition to the kitchen or dining room table setting. Did we mention what a great gift idea these are? Items used in this demonstration include: 154182 - Antique Hand Crank Pepper Grinder Kit Mechanism 145706 - WoodRiver 1/2' x 4' Forstner Bit Extension 125935 - 1' Forstner Bit 149927 - Full Size Easy Finisher (Easy Wood Tools)

 

Turning a Pepper Mill ·
By: Walter Wager
January 15, 2014 · 16,570 views

Explains how to turn and assemble a pepper mill

 

Turning a Wooden Pepper Mill ·
By: Shawn Gano
December 19, 2013 · 41,977 views

How I turn pepper mills on a lathe. (see text instructions below) Here is a photo (with ruler for scale) of the story stick I used in the video: http://www.gano.name/shawn/PepperMill_8in_Storystick.jpg --------------- Peppermill Instructions (thanks to Mike Huber!!) ---------------- • Turn the blank round on one end to form a tennon to fit the 4 jaw check • Mount in the 4 jaw and continue to round blank • Mark the critical points using the story stick • Create the two lower beads • Define the critical points to the dimensions on the story stick with a parting tool • Shape the body with a ”

 

CrushGrind Mechanisms ·
By: Brendan Stemp
December 12, 2013 · 20,903 views

I look at the CrushGrind mechanisms, why I use them and how to fit them to a grinder.

 

Making a Salt Box part 2. ·
By: Cip's Wood Chips
September 05, 2013 · 6,893 views

Part 2, finishing the exteriors. I turn small boxes that many people use for dispensing table salt. I had to split this project into two videos. Part 1 showed you the trueing of the blank, hollowing the lid and bowl.

 

Turning a Maple Salt Box part 1 ·
By: Cip's Wood Chips
September 05, 2013 · 19,074 views

I turn small boxes that many people use for dispensing table salt. I had to split this project into two videos. Part 1 shows you the trueing of the blank, making the lid and bowl. Part 2 finishes the exteriors.

 

Turning a Salt Grinder ·
By: Steve Lindsley
August 20, 2013 · 43,944 views

In this video I turn a salt grinder to match a pepper grinder I had turned earlier. The pepper grinder was made from walnut so I wanted a contrasting wood and decided on curley maple. I got lucky with the blanks as both had a lot of figure and finished very well. The process I used to make this salt grinder is the same as I use to make my pepper grinders. The crush grind mechanisms are fairly easy to install and adjust. Overall, it was a fun project. I hope you enjoy the video. Comments are always welcome.

 

# 172 Peppermill Basics ·
By: Cap'n Eddie Castelin
June 09, 2013 · 109,704 views

Turn a peppermill with a cheap mechanism. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Woodturning Pepper Mill ·
By: Carl Jacobson
May 17, 2013 · 71,084 views

I turned this Spectraply pepper mill on the lathe. Pepper mills are great project, and make great gifts. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes j

 

44 - Salt Pig & Salt Shaker - Moe Gingerich - 1 May 2012 ·
By: Waxhaw Woodturners
May 11, 2013 · 1,406 views

Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwt.com Video by Rich Hansen.

 

Woodturning Pepper Mill out of Bog Oak ·
By: Carl Jacobson
March 15, 2013 · 31,966 views

ChefwareKits https://www.chefwarekits.com/?tracking carl My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. In this video I turned a Pepper Mill out of Bog Oak. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Turning Peppermills (Revision 1) ·
By: Eugen Schlaak
March 05, 2013 · 1,531 views

A video/slide presentation about producing a pepper/salt mill set using 'Chef's Specialty' mechanism

 

# 150 Pass the Salt ·
By: Cap'n Eddie Castelin
November 29, 2012 · 13,739 views

A simple gift project, perfect for holiday giving. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Peppermills Made Easy Intro ·
By: PeachtreeWoodworks
November 01, 2012 · 1,820 views

Ron Brown introduces his brand NEW DVD with a brief description of what you will see on the DVD plus a very special offer.Get the Peppermill Kits here... http://www.ptreeusa.com/turning_kits.htm

 

Woodturning An Unusual Salt Shaker in Maple ·
By: As Wood Turns
August 24, 2012 · 18,278 views

http://www.aswoodturns.com This woodturning project is a salt shaker or salturn in hard maple. It was inspired by a demonstration by Terry Gerros from Willamette Valley Woodturners to Cascade Woodturners. The blank is 3'x3'x6' tall, finished with shellac friction polish, This salt shaker does not have a removeable opening or removeable top. Nor does it have holes in the top from which salt is shaken. Instead, the bottom is a small funnel. As salt is poured into the funnel it flows thru the single hole into the cavity of the salt shaker. The inside is an inverted funnel that keeps salt inside u

 

Choosing the Right Salt/Pepper Mill (woodturning projects) ·
By: Craft Supplies USA
April 30, 2012 · 52,622 views

Enjoy turning a beautiful, one-of-a-kind salt or pepper mill today! Learn more:https://www.woodturnerscatalog.com/Sales/24/Pepper-Mills?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Beautiful hand-turned salt and pepper mills are the perfect complement to any kitchen. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and supplies in the industry. Salt and Pepper mills are Available at https://www.woodturnerscatalog.com, 1-800-551-8876 Subscribe to

 

Woodturning-Making a Peppermill Focus on Design with Ted Sokolowski DVD trailer ·
By: Ted Sokolowski
April 01, 2011 · 4,900 views

Learn advanced design techniques through all the stages of making a peppermill and matching salt shaker or salt mill. From template design and construction, to shaping, sanding and finishing, you'll end up with a finished project you will be proud to display or give as a gift. Ted's 'Goody Box' contains valuable supportive clips that will aid you in design and added tool control.

 

Peppermills segmented turning by A.D.G. ·
By: Anto Dega Wood
February 13, 2011 · 56,519 views

 

How to Make a Pepper Mill - Part 2 ·
By: Sam Pane
January 02, 2011 · 17,605 views

In this video I show how to make the remainder of the pepper mill including shaping, sanding, finishing assembly.

 

How to Make a Peppermill - Part I ·
By: Sam Pane
January 02, 2011 · 22,251 views

This video demonstrates how I make a solid wood pepper mill on a lathe.

 

WOOD TURNING PROJECT PEPPERMILL PT. 4 ·
By: MDCD2370
July 05, 2010 · 1,629 views

M. DONALDSON FINISHED PEPPERMILL

 

WOOD TURNING PROJECT PEPPERMILL PT. 3 ·
By: MDCD2370
July 03, 2010 · 2,956 views

M. DONALDSON TURNING A PEPPERMILL

 

WOOD LATHE PEPPERMILL PT. 2 ·
By: MDCD2370
June 26, 2010 · 1,590 views

M. DONALDSON TURNING A PEPPERMILL

 

WOOD LATHE PROJECT- PEPPERMILL ·
By: MDCD2370
June 24, 2010 · 3,343 views

M. DONALDSON TURNING A PEPPERMILL 6-24-10

 

Making a Peppermill with Ted Sokolowski (woodturning DVD preview) ·
By: Craft Supplies USA
March 12, 2010 · 5,978 views

A preview of Ted Sokolowski's woodturning video 'Making a Peppermill'. Buy now: https://www.woodturnerscatalog.com/p/78/2370/Sokolowski-Studios-Making-a-Peppermill-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA This is an excellent DVD which gives insight into design aspects of making pepper and salt mills that can be translated into all projects on the lathe. From template design and construction to shaping, sanding and finishing, youll learn everything you need to know to turn professional g

 

Turning A Salt Shaker, Step 2 ·
By: gmertl
December 31, 2009 · 39,588 views

Drilling Out The Blank.

 

Turning A Salt Shaker, Step 3 ·
By: gmertl
December 31, 2009 · 13,693 views

Turning The Blank To Shape.

 

Turning A Salt Shaker, Step 4 ·
By: gmertl
December 31, 2009 · 9,822 views

Sanding The Blank.

 

Turning A Salt Shaker, Step 5 ·
By: gmertl
December 31, 2009 · 8,025 views

Shaping the Cap Section.

 

Turning A Salt Shaker, Step 6 ·
By: gmertl
December 31, 2009 · 7,093 views

Finishing The Cap Section.

 

Turning A Salt Shaker, Step 7 ·
By: gmertl
December 31, 2009 · 6,809 views

Drilling the Salt Holes in the Cap.

 

Turning A Salt Shaker, Step 8 ·
By: gmertl
December 31, 2009 · 6,733 views

Buffing Out The Finish.

 

Turning A Salt Shaker, Bloopers ·
By: gmertl
December 31, 2009 · 3,826 views

Some mishaps, just for a chuckle.

 

Turning A Salt Shaker, Intro ·
By: gmertl
December 31, 2009 · 7,033 views

Concept, Tools and Materials.

 

Turning A Salt Shaker, Step 1 ·
By: gmertl
December 31, 2009 · 12,493 views

Preparing The Blank.

 

The Crush-Grind PepperMill, Episode 1 ·
By: gmertl
October 28, 2009 · 26,635 views

Overview and Preparing the Wood Blanks.

 

The Crush-Grind PepperMill, Episode 2 ·
By: gmertl
October 28, 2009 · 21,918 views

Drilling Out The Wood Blanks.

 

The Crush-Grind PepperMill, Episode 3 ·
By: gmertl
October 28, 2009 · 17,313 views

Turning The Base Section.

 

The Crush-Grind PepperMill, Episode 4 ·
By: gmertl
October 28, 2009 · 12,724 views

Turning The Base Section, Continued.

 

The Crush-Grind PepperMill, Episode 5 ·
By: gmertl
October 28, 2009 · 11,621 views

Turning The Top Section.

 

The Crush-Grind PepperMill, Episode 6 ·
By: gmertl
October 28, 2009 · 11,653 views

Turning The Top Section, Continued.

 

The Crush-Grind PepperMill, Episode 7 ·
By: gmertl
October 28, 2009 · 12,753 views

Finishing, Buffing and Assembly.

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodturning with Tim
Flutemaster
Carter Products

(Click any Ad to go to our Sponsor's Website)