Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

New Videos Category

 

New Videos (522 in the last 30 days)

Sort by

Or click here to: Search All Videos


Can you wood turn a coconut ?
By: Nick Zammeti
Video ID: cp1m60kW7QE
September 14, 2019 · 658,123 views

#coconuts #woodturning **I tried to wood turn a coconut on my lathe. Had a few problems i wont lie. it wasn't easy but the end result turned out pretty cool i think . Check it out** Become a Makers Central Member Here https://members.makerscentral.co.uk/ Charlie The Maker (My Son's Channel) https://goo.gl/kSViJv The Music I use in my video's http://share.epidemicsound.com/qdj62 Tik Tok http://vm.tiktok.com/Bqu8Hg/ @nickzammeti Patreon ( Please consider supporting my channel) https://www.patreon.com/nickzammeti Nick Zammeti/ Instagram https://www.instagram.com/nickzam

 

Shaving Foam - Epoxy Resin - Food Dye.. Watch What Happens...!
By: Nick Zammeti
Video ID: 3OFI8twDcYo
September 07, 2019 · 604,000 views

#shavingfoam #foodcoloring #epoxyresin This was a little experiment using Nivea shaving Foam, Food Coloring and epoxy resin. I think the end result was pretty neat if I say so myself. lol hope you like it. Tik Tok http://vm.tiktok.com/Bqu8Hg/ @nickzammeti Small LED Lights https://amzn.to/315kJH2 Become a Makers Central Member Here https://members.makerscentral.co.uk/ Patreon ( Please consider supporting my channel) https://www.patreon.com/nickzammeti Nick Zammeti/ Instagram https://www.instagram.com/nickzammeti My Kit I use in my videos https://kit.com/nickzammeti

 

Woodturning - Yew Log to Vase
By: Andy Phillip
Video ID: 6YF1kfiE6fs
September 20, 2019 · 255,108 views

Here I turn a Yew log into a vase that won't hold much water .. I wasn't sure where I was going with this piece just mounted it up and went along for the ride !! I finished it with a coat of light oak stain to help the colour pop and a couple of coats of Osmo oil .. my etsy & Instagram links https://www.etsy.com/uk/shop/AndyPhillipHandmade? https://www.instagram.com/andyphillip_/ DISCLAIMER : My videos are for entertainment purposes only. When using any tools/machinery always read & understand manufacturer's guidelines & safety instructions. The methods I use may not be the safest, so please be responsible for your own safety ...

 

Segmented Aromatic Cedar Vase
By: Kyle Toth
Video ID: zqC5nSkuDYw
September 12, 2019 · 148,076 views

This vase is available a thttps://woodbytoth.bigcartel.com This Vase is made in cedar, black veneer and ziricote. Its 18 inches tall and 6 inches wide. Every ring on this vase is tapered to 7 degrees which makes you give the vase a second look. This is my 110th vase. I started the series back in 2007 with the hopes of making 100 vases, the series continues.... Thanks for watching Toth Suscribe: https://www.youtube.com/user/HomedepotKt -Amazon links- Hand Saw: http://amzn.to/2FWKkIe Triton Super Jaws: http://amzn.to/2BuO3y9 Triton Power Sander: http://amzn.to/2BiJW3X Bandsaw: htt

 

Woodturning a flower vase with a plastic Pepsi bottle. Tournage sur bois d'un vase a fleur
By: Pierre Lussier
Video ID: GcrcBntAKAI
September 19, 2019 · 79,375 views

Woodturning a flower vase and inserting a plastic Pepsi bottle to contain the water. Tournage sur bois d'un vase a fleur avec un insertion d'une bouteille de plastique dans ce ça ci une bouteille de Pepsi, ce qui permet de remplir d'eau pour les fleurs. You can visit my website, voir mon site www.pierre lussier.com You get a 10% discount at StarBond for there CA glue, if you give the coupon code : GOUGE https://www.starbond.com/?rfsn 2488150.9b9cd1

 

Making a Very Odd Shaped Vase
By: Nick Zammeti
Video ID: 9ohZR4a2Qaw
September 04, 2019 · 71,641 views

Makers Central Members https://members.makerscentral.co.uk/ #MC2020 Charlie The Maker (My Son's Channel) https://goo.gl/kSViJv Patreon ( Please consider supporting my channel) https://www.patreon.com/nickzammeti Nick Zammeti/ Instagram https://www.instagram.com/nickzammeti My Kit I use in my videos https://kit.com/nickzammeti The Music I use in my video's http://share.epidemicsound.com/qdj62 Nick Zammeti Personal Instagram https://www.instagram.com/zammeti My Website http://www.nickzammeti.co.uk The Epoxy Art Resin I Use http://www.ebay.co.uk/usr/ak

 

Woodturning - Scheppach lata 5.0 and the Big Burl!
By: Matt Jordan
Video ID: 8pbLLZKix4U
September 06, 2019 · 70,732 views

Got me a new lathe! Quick un-boxing and assembly to show how easy the lathes are to assemble. Started turning this large burl on my old lathe, but never got round to finishing, thought it would be nice to Christen the new lathe with it. Links to the lathe can be found on my kit page. Specifications of the Scheppach lathe are as follows - - 1hp Induction Motor - 10-Speed 500-2100 rpm - 180 Swivelling Headstock - Forward & Reverse Turning - Weight - 92kg - Max. distance between centres: 1050mm - Max. diameter over bed: 355mm - Spindle head thread: M33 Where you can find some of the things I use - https://kit.com/MattJordan

 

Vase Segmenté En Poirier - Tournage Sur Bois
By: Olivier Gomis
Video ID: VwZh4uQzq70
September 04, 2019 · 60,255 views

J'ai fait ce vase à partir de petites branches de poirier que l'on m'avait donné. Elles étaient trop petites pour tourner quoi que ce soit alors je les ai débité en petit morceau pour en faire un vase segmenté. N'hésitez pas à vous abonner pour ne pas rater mes prochaines vidéos ! Pour plus d'infos sur cette pièce et pour voir mes autres oeuvres, rendez-vous sur ma boutique en ligne ici: https://www.etsy.com/fr/shop/GOMISOtournage Instagram https://www.instagram.com/olivier_gomis_

 

Woodturning - The Decking Paperweight
By: Andy Phillip
Video ID: yn3MmCnYkSU
September 27, 2019 · 57,811 views

I got some cool ribbons from some composite decking I was drilling and thought they may look good cast in resin and turned .. It pretty much looked like a black pebble unless I photographed it with the flash !! but thought I would post the video for you to check out .. my etsy & Instagram links https://www.etsy.com/uk/shop/AndyPhillipHandmade? https://www.instagram.com/andyphillip_/ DISCLAIMER : My videos are for entertainment purposes only. When using any tools/machinery always read & understand manufacturers guidelines & safety instructions. The methods I use may not be the safest so please be responsible for your own safety ...

 

Seashell bowl
By: The Pohl Barn Productions
Video ID: hVdV8aNco_Y
September 06, 2019 · 56,221 views

Another Collab video, seashells resin and box elder in this project this week. Kim Tippin is the target today, everyone please pop over and show her channel some Love ! Kim Tippin Wood Turning https://www.youtube.com/channel/UChOkCqsbNr6K1RYi9Sadb5Q My Amazon Store https://www.amazon.com/shop/thepohlbarnproductions mylands sanding sealer https://amzn.to/2Lo0oY3 easy wood carbide mid size https://amzn.to/2MVX1JR Sponsored by Total Boat and Jamestown Distributors Find them here. use PROMO CODE POHLBARN for 20% off totalboat.com or jamestowndistributors.com Also Sponsored by Acks Abra

 

Woodturning - Rotten to the Core
By: Matt Jordan
Video ID: VBK0N9-TN8M
September 14, 2019 · 54,630 views

This weeks project was not supposed to turn out like this, I knew there was a bit of rot in the wood, but not to the extent it ran all the way through to the centre. After a bit I gave in and just worked with what was there, picked and ground out the real soft stuff and stabilized the remaining with CA glue. Certainly never had time this week to break out the resin so its finished as nature left it. Sanded to 400 and finished with Danish oil. Wood is Apple. Where you can find some of the things I use - https://kit.com/MattJordan

 

Feathers- Tinsel- Burl & Mother of Pearl ?
By: Nick Zammeti
Video ID: wmLOwvZjC7E
September 28, 2019 · 47,054 views

Resin Ring Molds https://amzn.to/2l8iF1f Patreon ( Please consider supporting my channel) https://www.patreon.com/nickzammeti Nick Zammeti/ Instagram https://www.instagram.com/nickzammeti Tik Tok http://vm.tiktok.com/Bqu8Hg/ @nickzammeti Mother of pearl from Scott Grove https://www.easyinlay.com/motherofpearl My Kit I use in my videos https://kit.com/nickzammeti Become a Makers Central Member Here https://members.makerscentral.co.uk/ The Music I use in my video's http://share.epidemicsound.com/qdj62 Nick Zammeti Personal Instagram https://www.instagram

 

Woodturning - The Plywood Larvae Lamp
By: Andy Phillip
Video ID: wBsxV9l_F_Y
September 13, 2019 · 42,927 views

Here I make a lamp from birch plywood and Wenge ..Reminded me of the Larvae of a butterfly and a 70s Lava Lamp .. my etsy & Instagram links https://www.etsy.com/uk/shop/AndyPhillipHandmade? https://www.instagram.com/andyphillip_/ DISCLAIMER : My videos are for entertainment purposes only. When using any tools/machinery always read & understand manufacturer's guidelines & safety instructions. The methods I use may not be the safest, so please be responsible for your own safety ...

 

Locking Levers for the Oneway easy core, bowl saver.
By: Glenn Lucas
Video ID: nvZN8QPveYg
September 22, 2019 · 38,295 views

https://glennlucaswoodturning.com/product-category/woodturning-supplies/ I have used the Oneway easy core bowl saver in my salad bowl production business for the last 20 years. I have modified the system adding my own locking levers so it can be adjusted more efficiently. Now these levers are available from our website. https://glennlucaswoodturning.com/product-category/woodturning-supplies

 

Tournage sur bois - Bol Minecraft
By: Olivier Gomis
Video ID: kqjCCIk5lWc
September 10, 2019 · 36,211 views

N'hésitez pas à vous abonner pour ne pas rater mes prochaines vidéos ! Pour plus d'infos sur cette pièce et pour voir mes autres oeuvres, rendez-vous sur ma boutique en ligne ici: https://www.etsy.com/fr/shop/GOMISOtournage Instagram https://www.instagram.com/olivier_gomis_

 

Woodturning - Oak Crotch Bowl ( Fixing big crack)
By: Olivier Gomis
Video ID: 1bk_ncyq-Bo
September 17, 2019 · 34,177 views

Don't forget to subscribe to not miss any futur videos ! For more infos on that piece and to check out my other stuff, visit my online store here: https://www.etsy.com/fr/shop/GOMISOtournage Instagram https://www.instagram.com/olivier_gomis_

 

Woodturning Epoxy Vase
By: Carl Jacobson
Video ID: 3-vN0cj0Frw
September 06, 2019 · 25,685 views

In this video I turned a Myrtle wood vase and finished it with epoxy. We used Stone Coat Countertops Epoxy. Epoxy https://amzn.to/2lyNJXZ YOU CAN ALSO FIND ME https://www.etsy.com/shop/Thewoodshoptv http://www.thewoodshop.tv/ https://www.instagram.com/thewoodshop.tv/?hl en https://www.facebook.com/thewoodshoptv/ I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link https://www.amazon.com/shop/thewoodshoptv Robust Lathe Dealer jacobson68@yahoo.com THANK YOU FOR SUPPORTING MY SP

 

Woodturning - A bit of Blue
By: Matt Jordan
Video ID: MAZPMUo30nw
September 26, 2019 · 25,396 views

This weeks project was is more of an experiment of colour than anything else, I've been after a vibrant blue wood stain wood for some time, so I dragged out a bit of fire wood to see how it would turn out, think I've found it but you can give me your thoughts in the comments. I lost some footage filling the cracks in the wood, but nothing else! Filler was red Mica Powder with CA glue, the black is Starbond black CA. Colour stain can be found in my kit page. Where you can find some of the other things I use too - https://kit.com/MattJordan

 

Ocean Fish Bowl with Box Elder Sent from Pohl Barn Porductions
By: Kim Tippin Wood Turning
Video ID: 9fBMn7Oq5M0
September 06, 2019 · 23,576 views

Amazing blank Doug sent me . Thank you SO much!! ETSY STORE LINK: https://www.etsy.com/shop/TippinWoodturnings INSTAGRAM: @ktwoodturningnphoto FACEBOOK: https://www.facebook.com/kimtippinwoodturning My Email: 2COR517KT@gmail.com Total boat: http://www.totalboat.com/ https://www.youtube.com/channel/UCbTMPp5eIyEt2pFJcMLrUDA Acks Abrasive paste: https://ackswoodpaste.com/ https://www.youtube.com/channel/UCOcBUwHCPxJ0Nl2AfCtq_fw Easy Wood Tools: http://www.easywoodtools.com/ https://www.youtube.com/user/EasyWoodTools Pressure Pot Harbor Freight: https://www.harborfreight.com/2-1-2-half-ga

 

Woodturning The Martian Bowl - Coolibah Burl
By: Jim Overton - Jimson's Stuff
Video ID: -oKIn4c6K-U
September 20, 2019 · 22,625 views

I'm calling this the Martian bowl because the Coolibah burl reminds me of the martian landscape featured in the film 'the Martian'. Opticast 3000 casting resin is from MBFG in Belfast https://www.mbfg.co.uk/polycraft-opticast-3000.html Easy Wood Tools http://www.easywoodtools.com/ https://www.yandles.co.uk/tools-machines/woodturning-tools/woodturning-chisels/easy-wood-tools/c1450 Yorkshire Grit Woodturner's abrasive paste https://yorkshire-grit.com/ Pressure pot is from Spray Equipment https://www.sprayequipment.co.uk/resin-casting-pressure-tanks/resin-casting-pressure-tanks.html Chestnu

 

Turning and coloring a Maple Burl Bowl
By: Cindy Drozda
Video ID: qL0czX5iQjc
September 01, 2019 · 19,776 views

In this video, I am turning an ogee shaped bowl with a natural edge out of Maple Burl, and coloring it with transparent dyes. You can see more of my work on my website http://www.cindydrozda.com I recorded this while I was rehearsing for a live remote demonstration for a woodturning club. The recording was about an hour long, but I cut it down to a half hour. Would you rather have seen an hour-long version of this, where you saw every cut? Is a half hour too long? I realize the audio isn't too good. I'm still tweaking my A/V setup and didn't realize that the mic was too hot until I heard the recording. If you would like to leave feedback about this video, please email me cindy(at)cindydrozda(dot)com, and put woodturning in the subject line. Or use the chat on my website. Thank you for watching!

 

Woodturning - Mosaic resin vase
By: Thomas Anton Geurts
Video ID: EVdGzXUEu1g
September 25, 2019 · 18,655 views

My first try at a resin vase. Wood used is padauk, wenge, and maple. The first pour was completely black, for the top and second pour i added a bit of 'rust' tint. Hope you enjoy the video! :). Not everything went smooth, such as having to fill all the tiny airbubbles. But overall i'm very pleased with how the idea came to being. The vase can be purchased on my etsy page https://www.etsy.com/shop/TAGwoodworking?ref seller-platform-mcnav My facebook page https://www.facebook.com//ThomasAntonGeurts/ Instagram https://www.instagram.com/tagwoodworking Music by https://www.audionautix.com

 

Bradford Pear Attack!
By: RickTurns
Video ID: hihtFTxsEEk
September 17, 2019 · 18,502 views

A Bradford pear log attacks! But in the end, I win, by turning that log into a bowl! With pegs! (And those pegs are walnut!) Here is a link to my video about building a drying box: https://youtu.be/KYogSkXQgEw Here is a link to making my dedicated shear scraper: https://youtu.be/cguioocjwIc Here is a link to Ack’s Wood Paste, which I use for finishing: https://ackswoodpaste.com/ The Bradford pear is orange when first cut (as shown in the video thumbnail), then rapidly fades to white, then slowly darkens to an orangey-brown. The music during the close of the video, 'Happy Little Elves' by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Woodturning Carbon Fiber Bowl
By: Carl Jacobson
Video ID: s7gRxecA_ws
September 14, 2019 · 16,244 views

We teamed up with Stone Coat Counter Tops to create this one of a kind carbon fiber bowl. We cast a piece of carbon fiber cloth in epoxy, and I turned it on the lathe into a bowl. Stone Coat Counter Tops https://www.youtube.com/user/bulldogquist/featured YOU CAN ALSO FIND ME: https://www.etsy.com/shop/Thewoodshoptv http://www.thewoodshop.tv/ https://www.instagram.com/thewoodshop.tv/?hl en https://www.facebook.com/thewoodshoptv/ I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link

 

Visit with Rod Humphrey, mulberry bowl
By: The Pohl Barn Productions
Video ID: QY50vnI-RnY
September 13, 2019 · 13,382 views

just and easy one this week no resin, but it was fun turning wet wood, Had a great time With Rod Humphrey while he was here. Pay attention I did sneak a couple pics in ! slim line pen kit starter bundle https://amzn.to/2ZY0ezx barrel trimmer https://amzn.to/304JNSh Michigan Barn Wood & Salvage LLC https://www.facebook.com/michiganbarnwood/ center finder https://amzn.to/32C5q98 sanding sealer https://amzn.to/34H66Mk my Amazon Store https://www.amazon.com/shop/thepohlbarnproductions Sponsored by Total Boat and Jamestown Distributors Find them here. use PROMO CODE POHLBARN for 20% off

 

Walnut Cake Stand
By: Kim Tippin Wood Turning
Video ID: ViyldANj8UA
September 20, 2019 · 13,163 views

I made this Walnut Cake Stand from walnut boards. These sell very well. I never have them long before they are sold. Hope this will help give you ideas. Like always, make it and make it better! :) Pray y'all have a blessed weekend! ETSY STORE LINK: https://www.etsy.com/shop/TippinWoodturnings INSTAGRAM: @ktwoodturningnphoto FACEBOOK: https://www.facebook.com/kimtippinwoodturning My Email: 2COR517KT@gmail.com Total boat: http://www.totalboat.com/ https://www.youtube.com/channel/UCbTMPp5eIyEt2pFJcMLrUDA Acks Abrasive paste: https://ackswoodpaste.com/ https://www.youtube.com/channel/UCOcBU

 

Woodturning Mulberry, and a Doug Moore Sighting!
By: R Humphrey
Video ID: JM9Ew2J7g1w
September 13, 2019 · 11,861 views

Wood turning a bowl from mulberry. It's a wood I hadn't turned before, and I like it a lot. Nice grain, nice color, and some chatoyance as well. I traveled north to Michigan and met Doug Moore of The Pohl Barn Production fame (Link to his channel here: https://www.youtube.com/channel/UC1-1pXVIRcKm-DUc-Ak2XyA We went looking at some bowl blanks together and picked out some dandies, and we're both turning them this week. I hope you click the link and check out his as well. See his video here: https://youtu.be/QY50vnI-RnY #rhumphrey #woodturning #woodturner Thanks for watching and subscribing! More project videos coming on a regular basis now that I'm back in action! Thanks for sticking with me! my Etsy store is here: https://www.etsy.com/shop/RHumphreyWoodworking This bowl and others are, or will be, available for purchase if interested. Thanks in advance!

 

Woodturning a Padauk Bowl with Veneer
By: PF Woodturning
Video ID: aqusplL7Rtk
September 20, 2019 · 11,808 views

#woodturning #veneer #padauk This week's project is a Padauk bowl with red veneer as a highlight around the rim. ******************************************************************** to support the channel and help create more content, consider supporting via: Patreon: https://www.patreon.com/join/2835716 ******************************************************************** Some tools and equipment I use and recommend: Belt sander cleaning stick: https://amzn.to/2L984NG Micro-mesh pads: https://amzn.to/2xDBRGP Larger Micromesh Pads: https://amzn.to/2HrRN44 Hut High Gloss Pen Polish: https://am

 

Turning a Miniature Lidded Container with Sam Angelo
By: WYOMINGWOODTURNER
Video ID: ddeqxDXOyP0
September 20, 2019 · 11,598 views

In this video, Sam is inspired by his friend Marty to turn something small. Please enjoy some nice close-up shots of Sam making this lidded container in Chechen wood. Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now a Robust Lathe dealer. Please contact me if you have any questions.

 

Walnut Burl Candle holder.
By: The Pohl Barn Productions
Video ID: fX1Mp-N9anE
September 27, 2019 · 11,262 views

A small Votive holder made from a Beautiful Piece of Walnut. Maple Tree Studios https://www.youtube.com/channel/UCqR2UWsbZNVQy8z-Ip_gxXw Moons woodshop Etsy https://www.etsy.com/shop/MoonsWoodshop?ref search_shop_redirect It's a turner thing T shirt https://teespring.com/its-a-turner-th-september-2019?view_as USA&pid 46&cid 2749&fbclid IwAR0g2K8VRsXVIuy_8w5crm2oPDUhOuKBAB68avYb-dHPt3T5JsAy7fG9YSQ center finder https://amzn.to/32C5q98 sanding sealer https://amzn.to/34H66Mk my Amazon Store https://www.amazon.com/shop/thepohlbarnproductions Sponsored by Total Boat and Jamestown Distr

 

woodturning: black hearted sassafras
By: Guil The Bearded Woodworker
Video ID: 3pw7Bw1JorA
September 19, 2019 · 10,995 views

i had an old blank of sassafras that was given to me recently having never turned it before i thought i would give it a go, and wow the wood is amazing. stay awesome all. #woodturning #aussiewoods ETSY STORE: https://www.etsy.com/au/shop/Thebeardedwoodworks PATREON: https://www.patreon.com/guilthebeardedwoodworker FACEBOOK: https://www.facebook.com/beardedwoodworker/ INSTAGRAM: https://www.instagram.com/guilthebeardedwoodworker/ SEND ME YOUR STICKERS, OR SEND ME A BLANK OR WHATEVER: 'Guil Noronha the bearded woodworker' po box 353 Maitland, NSW, Australia 2320

 

Creating a Copper and Brass Inlaid Wood Liner Ring
By: Tempest Rings
Video ID: ssbJbddN-Vw
September 11, 2019 · 8,543 views

ALL RINGS 20% OFF IN SEPTEMBER @ https://tempestrings.com This ring was made using copper tube, half round brass wire and waterfall bubinga wood. I inlaid the brass wire in cross segments and created a wood liner on the inside of the band for a different look. Thanks for watching! My Shop: https://tempestrings.com My Instagram: https://www.instagram.com/tempest.rings/ My Facebook: https://www.facebook.com/tempestrings

 

Woodturning a beautiful Maple Burl
By: CraftWithAfshin
Video ID: 53WLLZp69Bs
September 13, 2019 · 7,853 views

Hi everyone today im turning a Pedestal bowl i initialy wanted to turn a lidded box but then changed my mind half way through due to pattern in wood, i also show different design for the foot i hope you like it! My email: craftwithafshin@yahoo.con My Amazon influencer link: https://www.amazon.com/shop/craftwithafshin

 

Woodturning - An Oak Burl Lidded Box
By: MG Makes
Video ID: 5DQXr6C-l9g
September 14, 2019 · 7,850 views

Welcome Back, Woodturning a Lidded box. It looks so simple True up blank Use 1/8th parting tool to set out proportions Hollow out lid, setting the thickness of the rim. Sand/Sanding seal/Yorkshire Grit/wax Rinse and repeat with the base If only - this was the second iteration. Normally i will show you the first attempt, but for those of you that may wish to follow my videos (like a tutorial) I didn't think it was safe However as always with a little perseverance and pacentice, it turned out alright. I will be looking into this thread of turning a little deeper in the future. Take pride in

 

Woodturning a White Oak Burl
By: R Humphrey
Video ID: IrQO2vwNHt0
September 27, 2019 · 7,719 views

Turning a live edge, or natural edged bowl from a white oak burl. Wood turning using a bowl gouge and a negative rake scraper. It’s a pretty one! Please like, share, and subscribe! Help my channel grow, I would greatly appreciate it! Leave a comment and let me know what you think! #woodturning #woodturner #rhumphrey

 

Black Walnut Salad Bowl # 183
By: The Wood Whirler
Video ID: kfUYu2FjAOk
September 04, 2019 · 7,677 views

Made a black walnut salad for the neighbor lady. They are always giving us stuff out of their garden. To get 20% off on all your epoxy needs, go to www.totalboat.com and use my code “whirler20”. To get 10% off on your CA glue needs, go to this link, https://www.starbond.com?rfsn 2506275.7134e

 

Shop Remodel
By: Carl Jacobson
Video ID: bKB6PD6ovXo
September 21, 2019 · 7,530 views

Shop Remodel We remodeled the mobile shop in time for our next road trip. I under coated the floor, and built a mobile cart for a new Harvey lathe and Kodiak sharpening system. I also installed a Harvey Champion bandsaw. Harvey Woodworking https://www.harveywoodworking.com/ Wood Turners Wonders https://woodturnerswonders.com/ Stuart Kent https://stuartkent.com/ YOU CAN ALSO FIND ME: https://www.etsy.com/shop/Thewoodshoptv http://www.thewoodshop.tv/ https://www.instagram.com/thewoodshop.tv/?hl en https://www.facebook.com/thewoodshoptv/ I put together a list of some of the tools

 

Centro de Copa Rotatorio Casero con Rodamiento
By: Daniel Vilarino
Video ID: 4G4D_qzJAEs
September 16, 2019 · 6,738 views

Hola/Hi! ***This video is in Spanish, to watch it in English, please click on the following link:*** Este video está en Español https://youtu.be/IqH1gh0XiOM Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make comments, give it a 'like' and subscribe to my channel.*** En este video hago un centro de copa giratorio casero con el uso de un rodamiento. ***In this video I make a homemade live cup center using a bearing*** Si por algún motivo no

 

Woodturning Wave Sphere
By: Carl Jacobson
Video ID: ve2CRG06XAQ
September 27, 2019 · 6,668 views

Woodturning Wave Sphere Mike and I cast this piece a few weeks ago at his shop. I cut the blank on the bandsaw using a circle jig I made, and recast the blank. The sphere is 5 1/4' and made out of Stone Coat Counter Tops supper cast epoxy. Stone Coat Counter Tops https://www.youtube.com/user/bulldogquist/featured Jordan Werx https://www.youtube.com/channel/UCyMIfEdQovchHDFILeRGhnA YOU CAN ALSO FIND ME: https://www.etsy.com/shop/Thewoodshoptv http://www.thewoodshop.tv/ https://www.instagram.com/thewoodshop.tv/?hl en https://www.facebook.com/thewoodshoptv/ I put together a list of

 

Wood Turning Tip #3- How to keep Dust OUT of your lungs in the workshop Sam Angelo
By: WYOMINGWOODTURNER
Video ID: _sXc2Igd0RY
September 04, 2019 · 6,395 views

In this 'Woodturning Tip' from the West End Sam discusses some simple approaches for protecting your lungs in your woodworking shop. Sam now lives in the west end of Billings, Montana. His new shop is now under construction. He will soon be open to teach individual or small group woodturning classes. If you are interested in scheduling a class, please contact Sam at samandcheryle@gmail.com. For more information on the Enviroklenz Air Filtration unit seen in this video, please click on this link: https://enviroklenzairpurifiers.com/enviroklenz-mobile-air-system-promotion/ and if you are interested in this unit, enter the Promo code- WW10 for a 10% discount Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now a Robust Lathe dealer. Please contact me if you have any questions

 

Torneado Esfera, Metodo Sombra, con Mandril, Usando Ancho Cilindro
By: Daniel Vilarino
Video ID: rWd260QX7kw
September 10, 2019 · 6,380 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click on the following link*** Este video está en Español. https://youtu.be/oTPC6bCqtBI En este video realizo el torneado de una esfera, sujetando el bloque de madera con un mandril y usando la sombra como guía, pero sin usar el factor de corrección. En su lugar, torneo un cilindro del diámetro de la esfera que deseo, marco su sombra a lo ancho, y con ese diámetro trazo la circunferencia que servira de silueta guía para la sombra. ***In this video I do the turning of a sphere, holding the blank with a chuck an

 

Turning a Maple Burl Bowl with Jimmy Clewes - Part 1
By: jimmy clewes
Video ID: 8F8lur2yOlE
September 23, 2019 · 6,331 views

Turning a Maple Burl Bowl with Jimmy Clewes Part 1 of 5

 

Turning Point: All Wrapped Up
By: RickTurns
Video ID: MZ1KEK5_t_w
September 06, 2019 · 6,320 views

In this brief video, I discuss how to temporarily keep a partially turned work piece from drying and cracking. The music during the close of the video, 'Happy Little Elves' by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Resin and shavings shave brush and bowl
By: Kim Tippin Wood Turning
Video ID: -3MQgTPnqlo
September 13, 2019 · 6,159 views

Shaving pucks range from 2.5' to 3' apx. You can find nice shaving pucks here: https://www.amazon.com/gp/product/B0071B7XCO/ref as_li_tl?ie UTF8&camp 1789&creative 9325&creativeASIN B0071B7XCO&linkCode as2&tag kimtippinwood-20&linkId e9a9cdd3b3198068eadbfe9d33de4bc0 OR https://www.amazon.com/gp/product/B004L4AMIG/ref as_li_tl?ie UTF8&camp 1789&creative 9325&creativeASIN B004L4AMIG&linkCode as2&tag kimtippinwood-20&linkId c36cdf0e257d1bd2ffeb8fc7a35cbdf1 ETSY STORE LINK: https://www.etsy.com/shop/TippinWoodturnings INSTAGRAM: @ktwoodturningnphoto FACEBOOK: https://www.facebook.com/kimtipp

 

# 32 - Wood Turning - Dino’s in a bottle - Wine and Dino’s donation turning
By: Kennett B Turned
Video ID: -uHw7iu1KYs
September 08, 2019 · 6,085 views

This week the Dino’s are back! A couple weeks ago we cast in resin a little dinosaur landscape in resin and wood. This week is the finishing of the project and my favorite part... Turning! We had a couple complications that were easily overcome, caused by miss steps in the casting process. But it did come out very nice! Let us know what you think in the comments section and don’t forget to give it a thumbs up (or down). And if you aren’t subscribed... what are you waiting for? . Please enjoy! The casting video: https://youtu.be/Ue-1FRg3gQY www.ackswoodpaste.com Use promo code: KBT10

 

Woodturning a Mahogany Urn with Rosewood, Walnut and Maple
By: Dan Livingston Makes
Video ID: KUXcLfdTGBU
September 09, 2019 · 5,887 views

Offered on: https://www.etsy.com/shop/LivingstonBrothers?ref search_shop_redirect This is the second time I've posted this urn design. From start to finish, this took about 12 hours. It is constructed of mahogany, walnut, maple and rosewood. I found a great online supplier of threaded brass inserts and acquired some more. The supplier is www.fromwalnuttoantlers.com and I highly recommend him. As always, thank you for subscribing and watching my videos. I've got a few special projects coming up soon! Until then, happy turning! --Dan ******************** Design Software: https://woodt

 

Mulberry bowl
By: The Pohl Barn Productions
Video ID: OFF56zpVhpg
September 20, 2019 · 5,766 views

just a bit of a Challenge and some fun, Accepted and I Nailed IT ! Tried to keep this separate from last weeks video although it was last weeks video. LOL center finder https://amzn.to/32C5q98 sanding sealer https://amzn.to/34H66Mk my Amazon Store https://www.amazon.com/shop/thepohlbarnproductions Sponsored by Total Boat and Jamestown Distributors Find them here. use PROMO CODE POHLBARN for 20% off totalboat.com or jamestowndistributors.com Also Sponsored by Acks Abrasive Paste https://ackswoodpaste.com/ Promo code POHLBARN10 StarBond https://www.starbond.com?rfsn 2506286.9ab9e4

 

Woodturning - Live Edge Square-ish Bowl
By: Phil Anderson - Shady Acres Woodshop
Video ID: jRmydvCjxZ4
September 19, 2019 · 5,627 views

My friend Gary from ThePapa1947 channel sent me this piece of Catalpa. Surprisingly easy to turn, the odd shape did present a challenge to come up with a square bowl as a finished piece, but I finally succeeded! Please Like, Share and Subscribe if you are so inclined. An Easy To Use List Of My Recent Videos: https://www.youtube.com/user/madronawoodworks/videos

 

Blackjack Oak Green Turned Bowl
By: Kim Tippin Wood Turning
Video ID: eE4ldJlgKtg
September 27, 2019 · 5,613 views

*** Special Thanks to Drew Jefferies for bringing me some of this beautiful wood!! Check his creations out at https://www.facebook.com/FHG1Cor1031/ ETSY STORE LINK: https://www.etsy.com/shop/TippinWoodturnings INSTAGRAM: @ktwoodturningnphoto FACEBOOK: https://www.facebook.com/kimtippinwoodturning My Email: 2COR517KT@gmail.com Products I use. Starbond: https://www.starbond.com/?rfsn 3108589.69aa8a Total boat: http://www.totalboat.com/ https://www.youtube.com/channel/UCbTMPp5eIyEt2pFJcMLrUDA Acks Abrasive paste: https://ackswoodpaste.com/ https://www.youtube.com/channel/UCOcBUwHCPxJ0Nl2A

 

Wood Turning Spalted Oak Firewood to Beautiful Bowl
By: ThePapa1947
Video ID: YF2C8Jkc67A
September 06, 2019 · 5,533 views

I turn a Spalted Oak winged bowl from a piece of firewood. It has some beautiful grain going on. There are 2 natural edges. This piece was from a tree that started growing wild 47 years ago on the corner of our property. We had it cut down 7 years ago. What did not get burned just sat semi covered and ended up spalting. If you found this video entertaining: Please Like and Subscribe and Share if you are inclined The video is for entertainment purposes only Look up other turnings I have done: Dizzy bowls Twister bowls Segments bowls Maple Burls Natural Edge Live Edge Bark Madrone Burl Segmented Turnings Bowls Wedgie Sled Wood Lathes segment glue up Droop bowl Pierre Lussier inspired vase Tumbling bowls Emerging Bowls Black Locust Vase Droop Bowl

 

Woodturning a Fortnite Character in Resin
By: PF Woodturning
Video ID: _HBBahkDk3g
September 06, 2019 · 5,499 views

#woodturning #fortnite #resin For this week's project I cast a Fortnite character in resin and turn it to an egg shape on the lathe. ************************************************************************* to support the channel and help create more content, consider supporting via: Patreon: https://www.patreon.com/join/2835716 ************************************************************************** Belt sander cleaning stick: https://amzn.to/2L984NG Micro-mesh pads: https://amzn.to/2xDBRGP Larger Micromesh Pads: https://amzn.to/2HrRN44 Hut High Gloss Pen Polish: https://amzn.to/2JxxWB1

 

Carbide Woodturning Tools – Who Needs Them? Part 1
By: Mike Peace Woodturning
Video ID: A6Pag9DMpak
September 06, 2019 · 5,420 views

Carbide woodturning tools are an option for woodturning. We demonstrate carbide cutters and compare and contrast them with conventional woodturning tools and discuss the pros and cons. If you missed Part 2 click here https://youtu.be/EEpUEjXKz2I I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Affiliate link to set of carbide tools https://amzn.to/2HNHyqW You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Robust Sweet 16 lathe tour with Sam Angelo
By: WYOMINGWOODTURNER
Video ID: nRpAECSjp88
September 06, 2019 · 5,380 views

Sam recently became the proud owner of a Sweet 16 Robust lathe. Please enjoy the tour...-Here is a link to the 'unboxing' video for the new lathe. 'I am now a Robust Lathe dealer. Please contact me if you have any questions.' Send me a comment or question via e-mail: @---- samandcheryle@gmail.com Sweet 16 review by Brent English-https://tinyurl.com/y2k6c37j Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

Woodturning - The Return
By: Woodturning Arts
Video ID: 1sYQR0Hjrgc
September 18, 2019 · 5,247 views

Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber Audio Information:

 

Desert Sunset Cedar River Platter
By: Kim Tippin Wood Turning
Video ID: Ua5h27bSeCM
September 02, 2019 · 4,957 views

ETSY STORE LINK: https://www.etsy.com/shop/TippinWoodturnings INSTAGRAM: @ktwoodturningnphoto FACEBOOK: https://www.facebook.com/kimtippinwoodturning Total boat: http://www.totalboat.com/ https://www.youtube.com/channel/UCbTMPp5eIyEt2pFJcMLrUDA Acks Abrasive paste: https://ackswoodpaste.com/ https://www.youtube.com/channel/UCOcBUwHCPxJ0Nl2AfCtq_fw Easy Wood Tools: http://www.easywoodtools.com/ https://www.youtube.com/user/EasyWoodTools Pressure Pot Harbor Freight: https://www.harborfreight.com/2-1-2-half-gallon-pressure-paint-tank-66839.html NOVUS Plastic Polish: https://www.amazon.com/gp

 

Fencepost: A Life Not In Vain
By: RickTurns
Video ID: sTWutT9TCxM
September 28, 2019 · 4,932 views

This fencepost led a long and honorable life in my backyard. But alas, nothing lasts forever, especially if its butt is buried two feet in the ground. After removing the post from my fence, I was reluctant to condemn it to the fireplace...it deserved better. And so, it lives on! As a ....... well, watch and see. The music during the close of the video, 'Happy Little Elves' by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

# 31 - Wood Turning - End grain Butcher Block to bowl
By: Kennett B Turned
Video ID: VPHnaiZ92Dk
September 01, 2019 · 4,834 views

A few weeks ago I picked up a few end grain butcher block cutting boards from a gentleman locally. I was interested to see how well they would turn and what the end result would be. This particular piece has 6 different wood species involved including 3 different oaks, maple, cherry and walnut. By no means what this turn easy especially the hollowing. But it did end up quite nice. Please let me know what you think. Hope you enjoy! www.ackswoodpaste.com Use promo code: KBT10 for 10% off Acks products **By no means is this video instructional or educational for anyone other than me. This

 

WoodTurning - Mulberry Live Edge Bowl
By: Phil Anderson - Shady Acres Woodshop
Video ID: tISAwtuEHsY
September 05, 2019 · 4,633 views

First time turning Fruitless Mulberry and it was a delight! From the ease of turning to the finished bowl, I liked everything about this gift of wood from Tuffy Marginez. Please Like, Share and Subscribe if you are so inclined. An Easy To Use List Of My Recent Videos: https://www.youtube.com/user/madronawoodworks/videos

 

Sam's New Montana Shop: Phase 3 the Framing Sam Angelo
By: WYOMINGWOODTURNER
Video ID: 1xXtIdFtKM0
September 14, 2019 · 4,589 views

In this video Sam shows the framing of his new shop from setting the walls to lifting trusses up with a crane....Phase 3 ends with a quick tour of the shop layout-the rough wiring is complete and the walls are ready for insulation and sheetrock. In phase 4 asphalt shingles will cover the roof and the outside walls will be sided. Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions

 

Woodturning Blue Scraps Bowl
By: Wood Workshop
Video ID: 8lQgbz2oSHo
September 09, 2019 · 4,575 views

In this woodturning project, I've made a bowl with these scraps of wood, which were on their way to the trash can. I've used blue colored resin with them and the result was pretty interesting. I hope you enjoy the video! Like and subscribe to support the channel! DISCLAIMER The Videos are for ENTERTAINMENT purposes only! Always follow your manufacturers guidelines and safety instructions! If you're hesitating about using the techniques, which we use. DO NOT try them.

 

Turning a Maple Burl Bowl with Jimmy Clewes Part 2
By: jimmy clewes
Video ID: eLns12zSzmY
September 23, 2019 · 4,570 views

Turning a Maple Burl Bowl with Jimmy Clewes Part 2 of 5

 

Woodturning - How to make lidded box (Maple burl)
By: CraftWithAfshin
Video ID: u2HSd3QRMxY
September 01, 2019 · 4,468 views

Hi in this video i will be showing how i make my lidded boxes its simple and leaves endless options for your imagination to change the shape. My email: craftwithafshin@yahoo.con My Amazon influencer link: https://www.amazon.com/shop/craftwithafshin

 

Turning a Box Elder Burl Bowl with Sam Angelo
By: WYOMINGWOODTURNER
Video ID: PMD8Hs2xd7s
September 25, 2019 · 4,458 views

In this video Sam plays the strong (?) silent type. With no fanfare and few words he simply turns a small bowl in Box Elder. He adds a bit of pyrography to deal with some natural rim defects. For more on turning bowls, click on this playlist link to see more: 'Turning Bowls' https://tinyurl.com/y69yo8ba I am now an authorized Robust lathe dealer. Please contact me if you have any questions Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com

 

Wood Lathe Christmas Ornaments – Hand Bell Pt 1
By: Mike Peace Woodturning
Video ID: yVD6jXoj25U
September 27, 2019 · 4,391 views

Wood lathe Christmas ornaments are fun beginner projects and make great gifts. I show how to turn a wooden hand bell Christmas tree ornament. A scroll chuck is nice but not necessary. Click here to watch Wood Lathe Christmas Ornaments – Hand Bell Pt 2 https://youtu.be/wNYVveokKZs As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Woodturning - Plum Live Edge Bowl
By: Phil Anderson - Shady Acres Woodshop
Video ID: lQa63t-82Yc
September 12, 2019 · 4,334 views

A gift of Plum from Nate at Mr. Nate's Wood Shop becomes this beautiful live edge bowl. Nate told me of the wonderful grain in this wood and he was right! Please Like, Share and Subscribe if you are so inclined. An Easy To Use List Of My Recent Videos: https://www.youtube.com/user/madronawoodworks/videos

 

Wood Turning a Apple Wood Bowl
By: ThePapa1947
Video ID: kwu4OpsMM_w
September 13, 2019 · 4,301 views

This Apple Wood bowl has the deep rich colored heart wood. Apple Wood is one of my favorite woods to turn. The wood is green but you will not have to wait for it to dry. I did that for you. The only finish I used was the abrasive paste and polishing paste which I made. You can find the videos in the links below. Abrasive Paste https://www.youtube.com/watch?v 6iA9enSpa98&t 106s Polishing Paste https://www.youtube.com/watch?v kDpXKMXmZBs I have nothing to compare it to but I find it works great. I have not bought any of the store bought products like Yorkshire Grit but I may someday to compare. If you found this video entertaining: Please Like and Subscribe and Share if you are inclined The video is for entertainment purposes only Look up other turnings I have done: Dizzy bowls Twister bowls Segments bowls Maple Burls Natural Edge Live Edge Bark Madrone Burl Segmented Turnings Droop bowl Pierre Lussier inspired vase Mike Waldt inspired vases Black Locust Vase

 

Woodturning - Spalted AND Quilted Beech Bowl
By: Turning Works
Video ID: fz2sCEVPllg
September 08, 2019 · 4,300 views

I've had this blank since the last UKWIS event, so thought it time to give it a chance to shine! Follow me on Instagram; https://www.instagram.com/turning_works Find me on Facebook; www.facebook.com/turningworks Find me on Twitter; https://twitter.com/turningworks Yorkshire Grit; https://yorkshire-grit.com Hampshire Sheen; https://www.hampshiresheen.com Chestnut products; https://chestnutproducts.co.uk

 

Woodturning Box Design
By: Mike Peace Woodturning
Video ID: vZjTc2XDTM4
September 13, 2019 · 4,297 views

Mike discusses the many elements of woodturning box designs from lid fit to overall box design in his presentation to the Georgia Association of Woodturners. He illustrates his points with a variety of boxes he has turned. Near the end is a slide show of his many box styles. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Affiliate links to books mentioned in this video https://amzn.to/2MIeIMS https://amzn.to/2MGMRww Affiliate link to Golden Ratio Calipers https://amzn.to/30021UC You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Chip and Dip Bowl # 184
By: The Wood Whirler
Video ID: Qmiy2Fcw_88
September 13, 2019 · 4,189 views

Honey Lucust and Ash Chip and Dip Bowl, pretty. 10% off on Acks Woodpaste, go to www.ackswoodpaste.com and use my code woodwhirler10. To get 20% off on all your epoxy needs, go to www.totalboat.com and use my code “whirler20”. To get 10% off on your CA glue needs, go to this link, https://www.starbond.com?rfsn 2506275.7134e

 

Woodturning - Gorgeous Cherry Plum Bowl!
By: Phil Anderson - Shady Acres Woodshop
Video ID: k5cUmTPiHDs
September 26, 2019 · 4,075 views

This well-aged and weathered piece of Cherry Plum, a gift from viewer Tuffy Marginez, becomes one of the most beautiful bowls I've ever turned. Please Like, Share and Subscribe if you are so inclined. An Easy To Use List Of My Recent Turnings: https://www.youtube.com/user/madronawoodworks/videos

 

Hand Turned Yew Bowl, Before and After
By: Wayne the Woodturner
Video ID: IR5IP8_9MYY
September 10, 2019 · 4,012 views

11'x4' Yew bowl.I turned this about 25 years ago and it needs a bit of a clean up

 

Cindy Drozda Live Remote Woodturning
By: Cindy Drozda
Video ID: 3tVcsk2wmAY
September 09, 2019 · 3,982 views

Here is a preview of what I can offer in a Live Remote Woodturning Demonstration. If your woodturning club or group would like to schedule me for a Live Remote Demonstration, please email, call, or text. cindy@cindydrozda.com, 3034497170 Please visit my website, cindydrozda.com, for more information about my artwork, demonstrations, workshops, and tools for sale.

 

The Sweet 16 Arrives at Sam's shop...The unboxing with Sam Angelo
By: WYOMINGWOODTURNER
Video ID: hxPZhltUBYU
September 06, 2019 · 3,933 views

Sam Angelo recently purchased a Robust Sweet 16 wood lathe. He will eventually add this lathe to his new shop which is now under construction. A video will follow in which Sam will give you a tour of this amazing lathe: link------ https://www.youtube.com/watch?v nRpAECSjp88 I am now a Robust Lathe dealer. Please contact me if you have any questions Send me a comment or question via e-mail: @---- samandcheryle@gmail.com Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

Turning Point: How Dry I Am
By: RickTurns
Video ID: uD95ebKRab0
September 12, 2019 · 3,753 views

How do you decide when a bowl blank is dry enough to finish turning it? My bowl blanks won't answer when I ask them that question - so I employ other methods. My drying box video: https://bit.ly/2kylNDt The music during the close of the video, 'Happy Little Elves' by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ How do you decide when a bowl blank is dry enough to finish turning?

 

SweetGum Stump and Resin Bowl # 185
By: The Wood Whirler
Video ID: fKZaJMPdRBs
September 22, 2019 · 3,723 views

A friend gave me a sweetgum stump, here's what I made. 10% off on Acks Woodpaste, go to www.ackswoodpaste.com and use my code woodwhirler10. To get 20% off on all your epoxy needs, go to www.totalboat.com and use my code “whirler20”. To get 10% off on your CA glue needs, go to this link, https://www.starbond.com?rfsn 2506275.7134e

 

Turning a Maple Burl Bowl with Jimmy Clewes Part 3
By: jimmy clewes
Video ID: Nj8ArRkBDfM
September 23, 2019 · 3,634 views

Turning a Maple Burl Bowl with Jimmy Clewes Part 3 of 5

 

Sharpening Lathe Tools – New Jig from Woodturners Wonders
By: Mike Peace Woodturning
Video ID: JqqC1SP9slw
September 24, 2019 · 3,603 views

Sharpening Lathe Tools – New Jig from Woodturners Wonders. Ken Rizza explains the features of his new Kodiak sharpening system for woodturning tools. https://woodturnerswonders.com/ As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Turning a Maple Burl Bowl with Jimmy Clewes Part 4
By: jimmy clewes
Video ID: tQ5vC0Bhx04
September 23, 2019 · 3,594 views

Turning a Maple Burl Bowl with Jimmy Clewes Part 4 of 5

 

Turning a Maple Burl Bowl Part 5
By: jimmy clewes
Video ID: cpFw-v1AhQc
September 23, 2019 · 3,548 views

Turning a Maple Burl Bowl with Jimmy Clewes Part 5 of 5

 

Woodturning Shou Sugi Ban 2 Yakisugi Cypress Charred Vase
By: William Hunt
Video ID: mgo1ZLKK74I
September 13, 2019 · 3,456 views

Shou Sugi Ban or Yakisugi (Charred Cypress Plank) is a Japanese charring technique for the preservation of construction timber, typically Cypress. The technique has found its way into the West as an art, and even into woodturning. In this second Shou Sugi Ban/Yakasugi video I try a couple of different approaches and further explore the technique of turning a charred Cypress vase. I largely followed Pat Carroll’s excellent tutorial in the August Issue of Woodturner Magazine. Previously, the most significant issue was the wood cracking during the charring process. I suspect it's in the nature

 

Woodturning Turners Filler Woodturners Potato Starch Filler Woodturning Potatoes
By: William Hunt
Video ID: iB7KkmZRJH0
September 03, 2019 · 3,390 views

In a few instances, I have had the need for a filler, particularly in a situation where I wanted to turn some punky wood that had some provenance. Recently this occurred with a piece of London Plane that had a large patch of soft, punky wood, which wanted to turn a lidded box from but the very soft patches would not provide me with a foundation for abrasive work. I decided to search for an improvised filler that would overcome this problem but would also take sanding sealer, stain, and a finish. Eventually, I found that potato starch might fit this requirement and this video is about the trial. Instagram https://www.instagram.com/lathecrafthp/ FaceBook https://www.facebook.com/lathecrafter/ #WoodturnersFiller #WoodturningFiller #WilliamHuntWoodturner #WilliamHuntWoodturning #WoodturningIdeas #YoutubeWoodturningIdeas #TopUKWoodturner #PunkyWood

 

Carbide Woodturning Tools – Who Needs Them? Part 2
By: Mike Peace Woodturning
Video ID: EEpUEjXKz2I
September 06, 2019 · 3,341 views

Carbide woodturning tools are an option for woodturning. We demonstrate carbide cutters and compare and contrast them with conventional woodturning tools and discuss the pros and cons. If you missed Part 1 click here https://youtu.be/A6Pag9DMpak I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Affiliate link to a set of carbide tools https://amzn.to/2HNHyqW You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Chasing Threads with a Bolt?
By: Mike Peace Woodturning
Video ID: 9apyQ7_Ew54
September 17, 2019 · 3,277 views

I demonstrate taking a 3/8' x 16 TPI bolt and making a thread chase to hand thread chase wood threads. Does it work! Check it out. As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Sorby Thread chasers https://amzn.to/2LAGj0M You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

hand turned ripple sycamore
By: Wayne the Woodturner
Video ID: 18aV9mvAxnY
September 08, 2019 · 3,243 views

Ripple Sycamore 13'x2'. Coloured with Blue Chestnut spirit stain and finished with Chestnut woodwax 22

 

Wood Turning a Natural Edge Maple Burl
By: ThePapa1947
Video ID: I1Jm9joUbcE
September 20, 2019 · 3,168 views

This Burl Bowl has a very nice natural edge with little spikes sticking up. All but a small area of this piece is burl. The wood was very dense. It turned sanded and took a nice finish. The shape reminds me of a flower opening up. If you found this video entertaining: Please Like and Subscribe and Share if you are inclined The video is for entertainment purposes only Look up other turnings I have done: Dizzy bowls Twister bowls Madrone Burl Segmented Turnings Bowls Pierre Lussier inspired vase Mike Waldt inspired vase Tumbling bowls Emerging Bowls Black Locust Vase Droop Bowl

 

Woodturning - A Quick Update
By: Mike Waldt
Video ID: 8erg4H47u0Y
September 27, 2019 · 3,089 views

The Blue Light Turner: https://www.youtube.com/channel/UCacuNr0RpQ5jIBtjyIED_3A Jordan Woodwerx: https://www.youtube.com/channel/UCyMIfEdQovchHDFILeRGhnA Woodworking 220-7 https://www.youtube.com/channel/UCRI7nYAclafY9d6ft4d1ulA Simon Hope: http://www.hopewoodturning.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Easy Wood Tools: http://www.easywoodtools.com/ Easy Wood Tools at Amazon UK: https://www.amazon.co.uk/Easy-Wood-Tools-Chuck-M33-3-5/dp/B07664VKFB/ref lp_8318174031_1_13?srs 8318174031&ie UTF8&qid 1529428204&sr 8-13

 

Natural Edge Apple Crotch
By: Gord Rock
Video ID: WKwjIcgUlmA
September 22, 2019 · 3,026 views

Turning a natural edge bowl from the crotch of an apple tree. Some of the hardest wood I've ever turned!

 

Preparing A Large Number Of Blanks For Turning
By: RJBWoodTurner
Video ID: r2ObSb5Kh7Q
September 24, 2019 · 2,986 views

I wanted to prep all of the blanks I got from the Mid-Ohio Valley Pen Turners Gathering. The blank types and kits are very diverse so it took a little planning to get it done. I hope you enjoy this look into how I do batch blank preparation. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Woodturning a Pinecone Sphere
By: PF Woodturning
Video ID: W8hFWJxh4IE
September 13, 2019 · 2,919 views

This week's project is a sphere--a yellow resin sphere with a pinecone casted in it. I use a Carter and Son's sphere jig. ******************************************************************** to support the channel and help create more content, consider supporting via: Patreon: https://www.patreon.com/join/2835716 ******************************************************************** Belt sander cleaning stick: https://amzn.to/2L984NG Micro-mesh pads: https://amzn.to/2xDBRGP Larger Micromesh Pads: https://amzn.to/2HrRN44 Hut High Gloss Pen Polish: https://amzn.to/2JxxWB1 Carter and Son Perfect

 

Turd Wood Bowl Blank
By: Pat Lap - Le PicBois
Video ID: mM1gQfkAAVc
September 08, 2019 · 2,886 views

I prepared a bowl blank on the band saw. And according to the smell, I'm pretty sure it's Turd Wood! SUPPORT THE CHANNEL • Patreon: https://patreon.com/patlap_lepicbois • Merch: https://teespring.com/stores/patlaplepicbois MUSIC • Foreign Entity - Calm Shores: https://www.epidemicsound.com FOLLOW ME • Website: http://lepicbois.net/ • YouTube: https://www.youtube.com/c/PatLapLePicBois • Instagram: https://www.instagram.com/patlap_lepicbois • Facebook: https://www.facebook.com/PatLapLePicBois/ • Twitter: https://twitter.com/PatLap_PicBois MY OTHER CHANNEL • Pat Laperriere

 

Mid-Ohio Valley Pen Turners Gathering Swag
By: RJBWoodTurner
Video ID: e1NDbL3ymC0
September 17, 2019 · 2,740 views

How about a little rundown of everything I got at the show. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Centros de Copa Para Tornear Esferas
By: Daniel Vilarino
Video ID: Avy03z5izaE
September 22, 2019 · 2,693 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click on the following link:*** Este video está en Español. https://youtu.be/NYaY2rzTkl8 En este video preparo un centro de copa roscado para el cabezal del torno y un centro de copa que forma una funda en un centro giratorio cónico. También demuestro cómo remover los pequeños cilindros de madera que quedan luego de tornear una esfera entre puntas. ***In this video, I make a threaded cup center for the lathe headstock and a cup center that forma a sheath on a conical live center. I also demonstrate how to remo

 

ACK'S GIVEAWAY and Shop update
By: Kim Tippin Wood Turning
Video ID: HUXh6Ob7qtA
September 24, 2019 · 2,647 views

Type 'ACK'S' In the comment section below for your entry to WIN ACK's ABRASIVE PASTE AND RESTORING POLISH!!! Sorry, this is for US residents only. Thank you EVERYONE for your support and encouragement! ETSY STORE LINK: https://www.etsy.com/shop/TippinWoodturnings INSTAGRAM: @ktwoodturningnphoto FACEBOOK: https://www.facebook.com/kimtippinwoodturning My Email: 2COR517KT@gmail.com Products I use. Starbond: https://www.starbond.com/?rfsn 3108589.69aa8a Total boat: http://www.totalboat.com/ https://www.youtube.com/channel/UCbTMPp5eIyEt2pFJcMLrUDA Acks Abrasive paste: https://ackswoodpa

 

Woodturning - Cooling Lava Bowl Giveaway!
By: Stewart Furini
Video ID: lILbKqtyh3I
September 22, 2019 · 2,643 views

Woodturning - well, here is video number 100 and it's a giveaway. SUBSCRIBERS WITHOUT FACEBOOK CAN ENTER BY LEAVING A COMMENT BELOW!! Watch me turn what I've called my Cooling Lava Bowl....simple colouring over a textured exterior with a waxed finish on a piece of ash. Chestnut Products Spirit Stains, sealer and wax, and Jo Sonya acrylic paint. HOW TO ENTER THE GIVEAWAY - share this video on Facebook and tag me in the share so I can put your name on the list of entrants. If you don't have facebook you can be entered for the competition if you are a subscriber and you leave a comment below.

 

Laguna 1216 Midi Lathe - More Tips and Comments
By: Mike Peace Woodturning
Video ID: 1YQ_RJUyrQ8
September 02, 2019 · 2,631 views

I give more tips and thoughts on my Laguna 1216 midi lathe now that I have had some time on it. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

September Notes from the Turning Shop with Sam Angelo
By: WYOMINGWOODTURNER
Video ID: asW0rvb9F-g
September 26, 2019 · 2,607 views

Sam brings you up to date on what is happening from his woodturning shop in Billings, Montana. He will answer some viewer questions and make a few comments of his own. He gives you a quick visual tour of the outside of his shop and home. I am now an authorized Robust lathe dealer. Please contact me if you have any questions Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com

 

Turning Two Of My Chaos 3.0 Sierra Blanks
By: RJBWoodTurner
Video ID: aF2EVC_VhBg
September 06, 2019 · 2,601 views

Tonight I decided to turn two of my Chaos 3.0 Sierra Length Blanks to be donated to Pens For Troops at the September 2019 Mid-Ohio Valley Pen Turners Gathering. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

woodturning: the sunrise platter
By: Guil The Bearded Woodworker
Video ID: ijcFTWIy_dk
September 05, 2019 · 2,479 views

so i started the platter in the sunrise cross over (last Video) and guess what i didn't finish it. so now all done and pretty. stay awesome all. :) ETSY STORE: https://www.etsy.com/au/shop/Thebeardedwoodworks PATREON: https://www.patreon.com/guilthebeardedwoodworker FACEBOOK: https://www.facebook.com/beardedwoodworker/ INSTAGRAM: https://www.instagram.com/guilthebeardedwoodworker/ SEND ME YOUR STICKERS, OR SEND ME A BLANK OR WHATEVER: 'Guil Noronha the bearded woodworker' po box 353 Maitland, NSW, Australia 2320

 

Woodturning - MK2 Copper Organic Centrifuge bowl
By: Turning Works
Video ID: O18gL14Pr70
September 22, 2019 · 2,477 views

This is the 2nd part of a set of 'organic' centrifuge bowls I am currently creating. The first one was decorated underneath - this one is decorated just on the top. Rustoleum Paint; https://www.rustoleum.com/ Hampshire Sheen; https://www.hampshiresheen.com/ Follow me on Instagram; https://www.instagram.com/turning_works Find me on Facebook; www.facebook.com/turningworks Find me on Twitter; https://twitter.com/turningworks

 

EnviroKlenz Mobile Air System -Unboxing with Sam Angelo
By: WYOMINGWOODTURNER
Video ID: 2Zkti-kNLl8
September 02, 2019 · 2,360 views

Sam recently received the EnviroKlenz Mobile Air System to try out in his shop. In this video he takes the air filtration unit out of the box and covers a few features. His plans are to try out the air filtration system and eventually put it in to his new shop. More updates to follow. (This is NOT a review). For more information on the Enviroklenz system please click this link: https://enviroklenzairpurifiers.com/enviroklenz-mobile-air-system-promotion/ and if you are interested in this unit, enter the Promo code- WW10 for a 10% discount Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now a Robust Lathe dealer. Please contact me if you have any questions

 

Torneado Esfera, Metodo de la Sombra, Entre puntas, con Factor Correccion
By: Daniel Vilarino
Video ID: bwHd1qbAung
September 03, 2019 · 2,320 views

Hola/Hi! ***This video is in Spanish, to watch it in English, please click on the link below:*** Este video está en Español. https://youtu.be/aki5jsYa_G0 En este video realizo el torneado de una esfera, usando el método de torneado ayudado por la sombra y considerando el factor de corrección para obtener el diámetro de esfera deseado. El torneado lo realizo entre puntas. ***In this video, I turn a sphere, using the method of turning helped by the shadow projection and considering the correction factor to obtain the desired sphere diameter. I do the turning between centers.*** Artículo de Da

 

#390 New Club?
By: Eddie Castelin
Video ID: 4Q6ONu-t148
September 08, 2019 · 2,318 views

This video is about 390

 

Moment of Peace #18 with Mike Peace
By: Mike Peace Woodturning
Video ID: 99N3B9KXrKg
September 10, 2019 · 2,254 views

I share some viewers comments on my recent carbide tool videos as well as some other video comments. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Mid-Ohio Valley Pen Turners Gathering 2019 Blank Makers
By: RJBWoodTurner
Video ID: I01tlIqCYyc
September 18, 2019 · 2,254 views

This is a video of all the Blank Makers at the Mid-Ohio Valley Pen Turners Gathering. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newbu

 

Spruce Burl Bowl - The FINAL Turning
By: Gord Rock
Video ID: kJLOGxsPYfQ
September 01, 2019 · 2,220 views

Enough people were interested in seeing the Spruce Burl Bowl turned with a deeper, wider bowl that I decided to turn it one more time. I hope someone will find it interesting. Link to the first turning of this burl: https://www.youtube.com/watch?v Yu2RDYb8q-Y&t 455s Link to the second turning of this burl: https://www.youtube.com/watch?v hr6JGG4GqYY&t 28s

 

Cap'n Eddie Castelin Live Stream
By: Cap'n Eddie Castelin
Video ID: 1z6JxVEcQHg
September 14, 2019 · 2,208 views

 

Woodpecker Birch Natural Edge Bowl
By: Gord Rock
Video ID: 2IDftcMARio
September 15, 2019 · 2,204 views

I was given a small log of Birch that had been attacked by woodpeckers. I wanted to keep a lot of the bark on this natural edge bowl. It was a pleasure to turn and I'm very happy with the results. I hope you like it.

 

Refurbish Your Live-Center Cone
By: Gord Rock
Video ID: V1dQMqIlF0E
September 08, 2019 · 2,191 views

The aluminum cone with my Oneway live-center was badly gouged and damaged. I decided to refurbish it.

 

Wood Lathe Christmas Ornaments – Hand Bell Pt 2
By: Mike Peace Woodturning
Video ID: wNYVveokKZs
September 27, 2019 · 2,119 views

Wood lathe Christmas ornaments are fun beginner projects and make great gifts. I show how to turn a wooden hand bell Christmas tree ornament. A scroll chuck is nice but not necessary. If you missed Wood Lathe Christmas Ornaments – Hand Bell Pt 1 click here https://youtu.be/yVD6jXoj25U As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Woodturning - The Pistachio shell bowl
By: CraftWithAfshin
Video ID: FcZuOeGa0ns
September 24, 2019 · 2,112 views

Hi everyone today im turning a pistachio shell bowl ive done one before i had less experience at the time so i thought id try it again see if i get better result it was still difficult but turned out better, i hope you liked it! My email: craftwithafshi@yahoo.com My Amazon influencer link: https://www.amazon.com/shop/craftwithafshin

 

Woodturning a Peruvian Walnut Urn
By: Dan Livingston Makes
Video ID: 0HQzeLz7G5c
September 15, 2019 · 2,010 views

Offered on: https://www.etsy.com/shop/LivingstonBrothers?ref search_shop_redirect I enjoyed every second of this project! Peruvian Walnut may very well now be my favorite wood to turn! And the chatoyance is awesome! I hope you enjoy my latest segmented piece. If you've subscribed to my channel, thank you very much. If you haven't yet, please subscribe. I try to put out one project per week. Happy turning! --Dan ******************** Design Software: https://woodturnerpro.com Turning Tools: https://carterandsontoolworks.com/ https://www.carterproducts.com/company/ https://www.robert

 

Fixing a couple Acrylic pens
By: RJBWoodTurner
Video ID: 4YobHXANgJ4
September 01, 2019 · 1,962 views

The C/A let loose and the lower tubes came lose on a couple pens. Today I took the time to fix those pens. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Woodturning Balloons, Corel, and Beer Collaboration project with Alan Maggs
By: William Hunt
Video ID: TnCtXbkAlys
September 20, 2019 · 1,954 views

Apologies in advance for the intermittent poor sound clips, experimenting with new camera equipment. Will be resolved in next project video. Alan, who lives quite close to me, has some interesting techniques in colourful finishes with acrylic paints. I invited him over to learn more, on the pretense of some beers…. Alan Maggs's “Branching Out” page on FB: https://www.facebook.com/Somerset41/ Shout outs: Please visit these fledgling woodturning channels and give Suzy and Courtland some support: Suzy Dragon Tail Turnings: https://www.youtube.com/channel/UCUi11jKCKiyuHDVMezOo7WA Courtland Hacker: https://www.youtube.com/channel/UCSICZLX14A_Qif8OmKOsoZg William Hunt woodturning ideas on YouTube. Instagram https://www.instagram.com/lathecrafthp/ FaceBook https://www.facebook.com/lathecrafter/ #WoodturningCollaboration #WoodturningIridescentPaint #WilliamHuntWoodturner #WilliamHuntWoodturning #WoodturningIdeas #YoutubeWoodturningIdeas #TopUKWoodturner

 

My New Shop Tour
By: Woodturning Arts
Video ID: T4-MZPn-eBc
September 08, 2019 · 1,933 views

Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber Audio Information:

 

Woodturning - Autumn Colour Riot Shallow Bowl
By: Stewart Furini
Video ID: hBwVrpvh8sw
September 03, 2019 · 1,903 views

Woodturning - Autumn Colour Riot - well, this moved a long way from the colours that originally inspired it from an acrylic paint pour video from Epoxy Wood, link below...maybe somebody will like it! Epoxy Wood: https://www.youtube.com/watch?v 6eOv8aK4MEM .................................................... Find me here: Website - https://stewartfuriniwoodturning.co.uk Facebook - https://www.facebook.com/FuriniWoodturning/?ref bookmarks Instagram - https://www.instagram.com/stewartfurini/?hl en Do I need Twitter? .................................................... Please be aware that woo

 

Woodturning Platter with Coloured Ribbons Effect
By: Stewart Furini
Video ID: T5CDXJICcEg
September 14, 2019 · 1,766 views

Woodturning - experimenting with a 3D effect of coloured ribbons lying over each other...less on the woodturning, and more on the colouring in this video....I get there eventually (though I liked the middle version best...). Feel free to share, comment and subscribe! .................................................... Find me here: Website - https://stewartfuriniwoodturning.co.uk Facebook - https://www.facebook.com/FuriniWoodturning/?ref bookmarks Instagram - https://www.instagram.com/stewartfurini/?hl en Do I need Twitter? .................................................... Please be awar

 

Grandson's Birthday Bowl # 182
By: The Wood Whirler
Video ID: bu7vrvJbjjk
September 02, 2019 · 1,750 views

My Grandson made a bowl for his channel and I am putting it on mine. He is 10 and the small bowl is Ash. I was always within arms reach. To get 20% off on all your epoxy needs, go to www.totalboat.com and use my code “whirler20”. To get 10% off on your CA glue needs, go to this link, https://www.starbond.com?rfsn 2506275.7134e

 

Signing the Demo Piece from today's WTSWM Live Remote
By: Cindy Drozda
Video ID: nR1fbrXqA7g
September 21, 2019 · 1,723 views

This is for the Woodturners of SW Missouri. During my Live Remote Demonstration today, I didn't have time to sign the piece that I made, so I did it and recorded it after we signed off. Thank you all for hosting me today! Fun and adventures in Woodturning! Show me pictures of what you do that is inspired by my demonstration! You can find me online at http://www.cindydrozda.com Or on Facebook https://www.facebook.com/cindy.drozda.3

 

Woodturning - Frankenstein Vase
By: MG Makes
Video ID: WqT-WoPLuH0
September 21, 2019 · 1,617 views

Welcome Back, I was struggling with motivation and ideas for this weeks project, so I started to go through my wood pile and found a nice looking log (or so I thought) - and proceeded to cut it into something more manageable (how i missed the dirty great crack running the length of it is beyond me) Anyway - once I had cut it to length and realised there was this imperfection a plan was forming and so the “Frankinvase” was born. I hate to throw things away and the idea of framing the “imperfection” lit a fire in my imagination. I need to work on my hollowing technique, but i suppose that com

 

My Bowl Conditioner
By: Woodturning Arts
Video ID: 4IvEYzmct4w
September 26, 2019 · 1,611 views

As requested here's video on how I make my bowl conditioner. Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber Audio Information:

 

Woodturning: The Flying Scrap Lidded Box
By: Wolf Ridge Woodworking
Video ID: TTSJ2gR-xOg
September 20, 2019 · 1,531 views

Today's project is a bit of an over achiever. It took flight not once, but twice! Ha Ha. Seriously though, my pen blank scrap bin was starting to overflow. So I thought they would make the perfect lidded box along with some clear resin from TotalBoat. I took some random scraps from my pen blank bin. I mostly used acrylic pen blanks because I seemed to have more of those than the wooden ones. Plus, the acrylic ones are way more colorful. I used most of the wooden ones to fill up the middle portion that would be turned away. The TotalBoat resin system makes it very easy to measure out th

 

Woodturning Maple Platter with Balloon Effect
By: PF Woodturning
Video ID: Kpok_5SpyOY
September 27, 2019 · 1,509 views

#woodturning This week I finish a maple platter and use the 'balloon effect' to embellish the rim. ******************************************************************** to support the channel and help create more content, consider supporting via: Patreon: https://www.patreon.com/join/2835716 ******************************************************************** William Hunt's YouTube Channel: https://www.youtube.com/channel/UCd5Z9pmBZJHb_MVWCAKhuBw William Hunt's 'Balloon' video: https://www.youtube.com/watch?v TnCtXbkAlys Some tools and equipment I use and recommend: Belt sander cleaning st

 

www.worldwidewoodturning.com
By: Eddie Castelin
Video ID: VYiK1MAgC70
September 16, 2019 · 1,501 views

on its way, be sure to subscribe

 

Cap'n Eddie Castelin Live Stream
By: Cap'n Eddie Castelin
Video ID: OH8ZLFkZQOk
September 13, 2019 · 1,493 views

 

Contour Gauge Duplicator for Woodturning?
By: Mike Peace Woodturning
Video ID: q8PSm2EDt2o
September 20, 2019 · 1,478 views

I demonstrate a couple of ways a woodturner can use a Contour Gage Duplicator for woodturning. This video was originally released 7/23/2019. Due to an error it never got promoted by YouTube and got almost no views so I am releasing it again. Sorry for the confusion if you havel already seen it. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Woodturning - Wild, Warping, Cross Grain Disks
By: As Wood Turns
Video ID: JZsOGs9NdqE
September 06, 2019 · 1,478 views

http://www.AsWoodTurns.com After seeing Pascal Oudet from France at the AAW symposium demonstrate, I came home to try it myself. I hoped to replicate the look and feel of his project. Pascal also sand blasts and bleaches many of his projects. However, I used fresh wet ornamental pear while he used French oak. The choice of wood, I think makes a difference for this project. Oak has more pronounced grain with hard and soft rings. Oak is also a tough wood that holds together well. On the other hand, the pear was more uniform and probably not as tough. Next time, I try this, I'll use oak or ano

 

Woodturning - Shallow Bowl with Imitation Tooled Leather Effect
By: Stewart Furini
Video ID: 3eiWSI-wuVw
September 07, 2019 · 1,471 views

Woodturning - here's a shallow bowl with a new painted technique for me. I'm calling it imitation tooled leather, but let's be honest, it's a very basic tooling! I can see myself doing this again perhaps in some brighter more vibrant colours. It was fun to do. Feel free to leave comments or questions below. Thanks for watching! .................................................... Find me here: Website - https://stewartfuriniwoodturning.co.uk Facebook - https://www.facebook.com/FuriniWoodturning/?ref bookmarks Instagram - https://www.instagram.com/stewartfurini/?hl en Do I need Twitter? ..

 

Unique Toothpick Holder # 186
By: The Wood Whirler
Video ID: 9L7bhr1XR_E
September 26, 2019 · 1,462 views

This is sort of a two part in one video. Japanese Maple and Walnut Unique Toothpick Holder. 10% off on Acks Woodpaste, go to www.ackswoodpaste.com and use my code woodwhirler10. To get 20% off on all your epoxy needs, go to www.totalboat.com and use my code “whirler20”. To get 10% off on your CA glue needs, go to this link, https://www.starbond.com?rfsn 2506275.7134e

 

14 creative ideas woodturning make beautiful kitchen accessories
By: Tony Wood Craft
Video ID: 9duCyD0L1cc
September 26, 2019 · 1,411 views

kitchen accessories

 

Route 66 Blank & Gear Shift Pen Kit
By: RJBWoodTurner
Video ID: ZQlf1qrq91c
September 26, 2019 · 1,410 views

I got this Gear Shift pen kit and Route 66 blank at the Mid-Ohio Valley Pen Turners Gathering. After turning I decided to send it to Dane Thompson a Garage Hot Rodder and fellow YouTuber Dane Thompson Burn Down: https://www.youtube.com/channel/UCYQmTsbiRo7XJ_InXh7lBMw Tell him I sent you. Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Mid-Ohio Valley Pen Turners Gathering 2019 Vendors
By: RJBWoodTurner
Video ID: z9xVNAtj3Kw
September 18, 2019 · 1,403 views

This is a video of all the Vendors at the Mid-Ohio Valley Pen Turners Gathering. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh,

 

DIY Wood Bleach For A Lighter Hue
By: As Wood Turns
Video ID: cOwZjJE8mnA
September 13, 2019 · 1,252 views

http://www.AsWoodTurns.com After seeing several examples of turning projects that had been bleached, I decided to try bleaching wood myself. I researched on the internet and found some great resources especially from AAW. I also checked for commercial wood bleach products. Most of these turned out to be wood cleaners based on oxalic acid. The solution I settled on is a two part solution. One part is a lye (sodium hydroxide) solution. The second part is hydrogen peroxide, a pool sanitizer. The tricky part was finding sources for both chemicals. For the lye, Amazon has pure lye crystals in t

 

Wood Turning a Wavy Black Locust Bowl
By: ThePapa1947
Video ID: 5YQSSEIit30
September 27, 2019 · 1,231 views

The bark on this piece is very dramatic looking. Very deep channels that add interest to the turned piece . I turned sides to a slight flying saucer shape.If you found this video entertaining: Please Like and Subscribe and Share if you are inclined The video is for entertainment purposes only

 

Homemade Live Cup Center with Bearing
By: Daniel Vilarino
Video ID: IqH1gh0XiOM
September 16, 2019 · 1,218 views

Hola/Hi! Este video está en inglés, si prefieres verlo en español, por favor haz un click en el siguiente enlace: ***This video is in English*** https://youtu.be/4G4D_qzJAEs En este video hago un centro de copa giratorio casero con el uso de un rodamiento. ***In this video I make a homemade live cup center using a bearing*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make comments, give it a 'like' and subscribe to my channel.*** Si por

 

Wood Turning - My First Square Shaped Natural Edge Elderberry Bowl
By: caitlan the cat
Video ID: BvKAkFd5YDg
September 02, 2019 · 1,175 views

This week at Wood Turning Club I had a go at my first square shaped bowl and was really proud of the way it came out. Using a piece of Elderberry Wood I turned the outside of the bowl and chucking point finishing with Wood Wax 22 before turning the inside. I gave the bark a coating of Acrylic Gloss to make it shine and make the natural edge really stand out. If you would like to see more check out my Facebook Page - https://www.facebook.com/caitlanthecat/ My Instagram - https://www.instagram.com/my_woodturning_creations/ #woodturning #naturaledge #squarebowl #woodworking #maker

 

Stop That Pen Press From Sliding All Over The Table
By: RJBWoodTurner
Video ID: mA4FaGkslSM
September 27, 2019 · 1,169 views

My press slides all over the table when I press with it. Many people suggest I mount the press. I am opposed to mounting the it because I like the versatility of using it in multiple places. Mounting it would limit that capability. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

woodturning: first christmas ornament
By: Guil The Bearded Woodworker
Video ID: U02fDN4T39k
September 27, 2019 · 1,168 views

ETSY STORE: https://www.etsy.com/au/shop/Thebeardedwoodworks PATREON: https://www.patreon.com/guilthebeardedwoodworker FACEBOOK: https://www.facebook.com/beardedwoodworker/ INSTAGRAM: https://www.instagram.com/guilthebeardedwoodworker/ SEND ME YOUR STICKERS, OR SEND ME A BLANK OR WHATEVER: 'Guil Noronha the bearded woodworker' po box 353 Maitland, NSW, Australia 2320

 

391 shop time
By: Eddie Castelin
Video ID: LoczlVEv9F0
September 20, 2019 · 1,146 views

This video is about 391 shop time

 

388 photos August 2019
By: Eddie Castelin
Video ID: sqkacl3XgQs
September 01, 2019 · 1,141 views

This video is about some great work

 

Woodturning a Football Urn
By: Dan Livingston Makes
Video ID: szxBfFyLDyY
September 24, 2019 · 1,133 views

Offered on: https://www.etsy.com/shop/LivingstonBrothers?ref search_shop_redirect This was fun to make! I realize that there should be a certain amount of dignity in a burial urn, but maybe there's some football fans out there who might appreciate. I tried to keep it close to the actual size of a real football. The internal space is 175 cubic inches. It's constructed of Peruvian walnut and maple, with a threaded brass insert. As always, a big THANK YOU to my subscribers! My fledgling channel is growing! Thank you! ******************** Design Software: https://woodturnerpro.com Turni

 

The New Woodturning Videos in August 2019
By: RickTurns
Video ID: _74aXq3RYUY
September 02, 2019 · 1,130 views

At the beginning of every month, I produce a list of the woodturning videos that were published on YouTube in the previous month. This list is built from data that I have extracted from YouTube via the YouTube Data API. I began collecting data at the beginning of 2016. I run my data extraction program 3-5 times each month, then ensure that the videos captured are correctly classified as 'woodturning' or 'so weird that I wonder how the search can return that'. After that, I assign the woodturning videos to categories based on the subjects of the videos. Along the way, I also capture information

 

Woodturning Basic Bowl - Never As Simple As It Should Be
By: As Wood Turns
Video ID: -YtOb7ZAJJs
September 27, 2019 · 1,103 views

http://www.AsWoodTurns.com This piece of wood came from the club wood exchange. Someone had started to turn it wet but stopped and gave it away. Now it has set around for long enough that it is dry. Fortunately, it did not crack in the drying process. Lucky break. I kept the original outside shape but that precluded some remounting options for turning the foot. Since the original divot was not true, I chose to carve the foot with a right angle tool with a rasp cutter. That worked better than I expected. As for the original woodturner- his loss is my gain. It is a pretty bowl. Resources ------------ Carving Tools -Variable Speed Angle Grinder Proxxon Longneck 2' Variable Speed Angle Grinder I don't see this model around much any more. Enjoy! Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used with permission.

 

Woodturning: White Flame Bowl
By: Wolf Ridge Woodworking
Video ID: OMiZYX0V1fc
September 13, 2019 · 1,086 views

For today's project, I've got a beautiful piece of Box Elder Burl. I didn't know exactly how spectacular it would be until I put a finish on it. The figure makes it look like there are white flames coming up the side. This bowl proved to be challenging to hollow out. I tried several different bowl gouges, both of which were freshly sharpened, but they just skated off the wood. Maybe it was my inexperience, but I wasn't getting anywhere so I decided to switch over to the carbides. I was able to use the square carbide to get the depth and then the round carbide cutter to blend the sides an

 

Wood Turning Resin Fail: Beginner Project
By: Cook Woodworks
Video ID: XA23TAMYMXU
September 20, 2019 · 1,037 views

This was my first time wood turning with resin on the lathe. The project wasn't a complete fail, and it was fun to turn a log into something cool, but it definitely didn't turn out how I planned. I am an absolute beginner, but I did learn a lot about pouring resin (especially what not to do) and it was cool adding a little bit of color to the resin. Wood turning with resin is a different animal, but I think the carbide tools make it a bit easier for beginners. It was also fun turning a raw log into something cool. I used colored sugar leftover from my wedding, which isn't ideal for coloring,

 

Multi Axis Woodturning Octahedron
By: As Wood Turns
Video ID: hQSJxK2_KIY
September 20, 2019 · 1,025 views

http://www.AsWoodTurns.com As I've noted before, I was impressed by demostrations by Max Brosi at the AAW Symposium at Raleigh, NC this summer. At first, I could not figure out how to turn this octahedron. However, once I understood the process that Max follows, then I have no fear any longer. Further, I can adapt the process to use some already familiear techniques. Basically, this is an exercise in mounting wood. This project used both drive centers and a chuck with multiple mounts. Beyond that, you'll need to watch the process. Resources ------------ DIY Wood Bleach For A Lighter Hue h

 

Woodturning A Walnut Goblet
By: jp woodwork
Video ID: x2EdHLpQRx0
September 05, 2019 · 1,023 views

This week video i decided to take inspiration from the God of the goblet AKA Godlet, Mr Mike Waldt .so i chucked up a nice piece of Walnut on to the wood lathe got it spinning and used the turning tools to help it take shape, i used various different carbide tips but my favourite is by far the number 1 hollower by easy wood tools one again i used my record power coronet herald lathe Huge thanks to the supporters of my Channel: Easy Wood Tools: http://www.easywoodtools.com/ Easy Wood Tools Products in the UK from Yandles: https://www.yandles.co.uk/search/easy... Record Power SS16V Scrolls

 

Staved & Segmented Vase - Part 1
By: Steve Lindsley
Video ID: tjYeEK6h_cg
September 15, 2019 · 1,017 views

In this video I show how I made the staved portion of this project. Music from the YouTube Audio Library Smooth Sailing (with Guitar) by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Tim Yoder's website: http://wtwtim.com/ The Art of Segmented Woodturning by Malcolm Tibbetts on Amazon: https://www.amazon.com/Segmented-Wood-Turning-Step-Step/dp/0941936864/ref asc_df_0941936864/?tag hyprod-20&linkCode df0&hvadid 312176357204&hvpos 1o1&hvnetw g&hvrand 1616624922941323923&hvpone &hvptwo &hvqmt &hvdev c&hvdvcmdl &hvlocint &hvlocphy 9010671&hvtargid pla-569889888171&psc 1&tag &ref &adgrpid 60258871857&hvpone &hvptwo &hvadid 312176357204&hvpos 1o1&hvnetw g&hvrand 1616624922941323923&hvqmt &hvdev c&hvdvcmdl &hvlocint &hvlocphy 9010671&hvtargid pla-569889888171

 

Sycamore Platter
By: Wayne the Woodturner
Video ID: lrK-cShR3fU
September 11, 2019 · 1,010 views

 

Pear-wood Table Woodworking
By: Elias Klingvall
Video ID: C5dZ11cKX2U
September 22, 2019 · 1,009 views

Small table made of Pear-wood from a storm fallen tree that I milled a few years ago. There were a lot of cracks that I filled with red epoxy. It's finished with Danish Oil and Hard-wax Oil

 

Meet me in Austria !!!
By: Kostas Annikas Deftereos
Video ID: 3FAaseaYYuI
September 05, 2019 · 999 views

I make this video just to let you know that i will in Austria Kuchl for The woodturning days Event 2019 ! i wish i can meet you there ! i add some links for the company !!! Forge Photography video !! https://youtu.be/fuP-Hs5T5T4 The neureiter link : https://neureiter-shop.at/ About the event : https://neureiter-shop.at/termine-news Gustav Bursch Channel that i get the video from the last event ! : https://www.youtube.com/channel/UCCqTgFiOpWAYrvRx37HL-aA If you like you can find me on the links bellow / μπορείτε να με βρείτε και στα παρακάτω λινκς facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos google : https://plus.google.com/u/0/ KostasAnnikasDeftereos Get the tools that i use / απόκτησε τα εργαλεία που δουλεύω : https://www.annikas.gr/hamlet-craft-tools https://www.annikas.gr/henry-taylor-tools https://www.annikas.gr/used-for-woodturning

 

Wood Turning - The Yandles Show 2019 - Demonstration
By: caitlan the cat
Video ID: P3OTUIu9aoM
September 09, 2019 · 989 views

This weekend I was lucky enough to have the opportunity to demonstrate my turnings at The Yandles Show 2019. It was an amazing weekend and I got the chance to meet and talk with loads of creative people. I did 4 demonstrations on the Easy Wood Tools stand and made 3 pieces. The first was a tea tree candle holder shaped like a milk urn which I used Chestnut iridescent paints to make a decorative band round the middle of it. The second was a candle stick with fine detail which I used the Wood Burning kit to burn lines into. The third was a Christmas tree which I decorated with Metalic and Iridescent paints to colour it. If you would like to see more check out my Facebook Page - https://www.facebook.com/caitlanthecat/ My Instagram - https://www.instagram.com/my_woodturning_creations/ #iridescent #metalic #woodturning #woodworking #maker

 

Sphere turning, Using Shadow, Between Centers with Correction Factor
By: Daniel Vilarino
Video ID: aki5jsYa_G0
September 03, 2019 · 908 views

Hola/Hi! Este video está en Inglés. Para verlo en Español, por favor haz un click en el enlace de abajo: ***This video is in English*** https://youtu.be/bwHd1qbAung En este video realizo el torneado de una esfera, usando el método de torneado ayudado por la sombra y considerando el factor de corrección para obtener el diámetro de esfera deseado. El torneado lo realizo entre puntas. ***In this video, I turn a sphere, using the method of turning helped by the shadow projection and considering the correction factor to obtain the desired sphere diameter. I do the turning between centers.*** Art

 

Turning A Bolt Action Pen For A Friend
By: RJBWoodTurner
Video ID: QHrYNpOYvkk
September 29, 2019 · 868 views

I made this pen for a good friend. Regards, Bob Links to Vendors: If you contact these people, please let them know I sent you. Lost River Wood Shop Michael DeLawter (812) 508-5700 lostriverwoodshop@gmail.com Facebook.com/lostriverwoodshop The Classic Nib Niels & Debbie Mathiasen (417) 308-3501 sales@classicnib.com www.classicnib.com Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Using a Shear Scraper with Jimmy Clewes
By: jimmy clewes
Video ID: UrvpR0FDrqE
September 23, 2019 · 830 views

Using a Shear Scraper with Jimmy Clewes

 

Explicacion Torneado Esfera Usando Tres Ejes
By: Daniel Vilarino
Video ID: Kp04wIqJX7g
September 27, 2019 · 823 views

Explicación de cómo tornear una esfera usando el método de los 3 ejes. Hola amigas y amigos! He visto unos cuantos videos que muestran el método de torneado de esferas usando los 3 ejes, también conocido como de las tres rotaciones. Aquí les presento algunos buenos videos del tema: Alan Stratton 'As Wood Turns' https://www.youtube.com/watch?v 3lConTQ-cUw Mike Peace Woodturning https://www.youtube.com/watch?v jYnbWbxVcVI Frank Howarth 'Frank makes' https://www.youtube.com/watch?v wZ7yfkBbsiw Dread Knot Woodshop https://www.youtube.com/watch?v ZM26MkUohMw Miguel Sanchez: https://www.youtu

 

ACK'S PASTE WINNER ANNOUNCEMENT
By: Kim Tippin Wood Turning
Video ID: nWkU0bUJgmY
September 26, 2019 · 772 views

WINNER, WINNER CHICKEN DINNER!!!!! CONGRATULATIONS!!!!!! PLEASE EMAIL ME YOUR MAILING ADDRESS @ 2COR517KT@GMAIL.COM THANK YOU EVERYONE!! ETSY STORE LINK: https://www.etsy.com/shop/TippinWoodturnings INSTAGRAM: @ktwoodturningnphoto FACEBOOK: https://www.facebook.com/kimtippinwoodturning My Email: 2COR517KT@gmail.com Products I use. Starbond: https://www.starbond.com/?rfsn 3108589.69aa8a Total boat: http://www.totalboat.com/ https://www.youtube.com/channel/UCbTMPp5eIyEt2pFJcMLrUDA Acks Abrasive paste: https://ackswoodpaste.com/ https://www.youtube.com/channel/UCOcBUwHCPxJ0Nl2AfCtq_fw

 

Eddie Castelin Live Stream
By: Eddie Castelin
Video ID: n6IzZ2X-p5M
September 10, 2019 · 768 views

 

Sphere Turning, Shadow, Using Chuck and Cylinder Width v3
By: Daniel Vilarino
Video ID: oTPC6bCqtBI
September 10, 2019 · 767 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en español, por favor haz un click en el enlace que sigue: ***This video is in English*** https://youtu.be/rWd260QX7kw En este video realizo el torneado de una esfera, sujetando el bloque de madera con un mandril y usando la sombra como guía, pero sin usar el factor de corrección. En su lugar, torneo un cilindro del diámetro de la esfera que deseo, marco su sombra a lo ancho, y con ese diámetro trazo la circunferencia que servira de silueta guía para la sombra. ***In this video I do the turning of a sphere, holding the blank with a chuck

 

Staved & Segmented Vase - Part 2
By: Steve Lindsley
Video ID: d08vulK043E
September 15, 2019 · 764 views

In this video I make the segmented portions of this project, bring it all together and do the finish turning. Once the finish sanding was complete I applied 5 coats of Arm-R-Seal by General Finishes. Music from the YouTube Audio Libary: Smooth Sailing (with Guitar) by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Medium Rock by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Hackbeat by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100805 Artist: http://incompetech.com

 

Try again
By: Wayne the Woodturner
Video ID: 6_Lgw9Xh3E8
September 04, 2019 · 752 views

 

Woodturning The Lime Bowl
By: jp woodwork
Video ID: 0co5hahBUmw
September 12, 2019 · 742 views

This week in the workshop on Woodturning with JP, i made a bowl on the record power coronet herald wood lathe, the wood i chose to use was Lime wood, This was a real fun turn and the easy wood carbide turning tools made light work of this woodturning blank, i sanded up to 320 grit and finished it with Yorkshire Grit Original Huge thanks to the supporters of my Channel: Easy Wood Tools: http://www.easywoodtools.com/ Easy Wood Tools Products in the UK from Yandles: https://www.yandles.co.uk/search/easy... Record Power SS16V Scrollsaw Available At Yandles in the UK: https://www.yandles.co.u

 

Wood Turning Tips - Black CA Glue Fill
By: SP Wood Art
Video ID: xsY-D1bji9c
September 03, 2019 · 736 views

The first of many dedicated videos for wood turning tips and tricks, more to come. Hope you enjoy these quick videos. SPONSORS: TOTALBOAT If you are interested in our sponsor’s product(s), please feel free to visit their site linked below. I highly recommend their products and customer service. If you need assistance with a project or technical advice, give them a call at (401) 396-8199. Totalboat - http://www.totalboat.com Totalboat - High Performance 2:1 Kit http://www.totalboat.com/product/high-performance-21-epoxy-kits/ STARBOND If you are interested in our sponsor’s product(s), please f

 

Simple, Effective, Center Finder for Wood Turning
By: SP Wood Art
Video ID: S1Y7Vn1KIXo
September 13, 2019 · 727 views

In this video, I create a center finder using plexiglass. This center finder also has indexing capabilities for wood turning. Though, this project is simple to make, it is a very effective tool with multiple uses. I hope you enjoy the show, and stick around to the end. Thank you for watching! SPONSORS: TOTALBOAT If you are interested in our sponsor’s product(s), please feel free to visit their site linked below. I highly recommend their products and customer service. If you need assistance with a project or technical advice, give them a call at (401) 396-8199. Totalboat - http://www.totalboat

 

Woodturning A Tealight Holder to keep Mosquito's away
By: jp woodwork
Video ID: l5x6OqQYDwc
September 19, 2019 · 712 views

in the workshop today this week i turned a Tealight holder out of plum wood i think it was. this tealights holder is to be situated in the bar outside to keep the Mosquito's away while we partake in a few alcoholic beverages because no one likes a mosquito bite haha! , as always my choice of woodturning tools are the easy wood tools carbide turning tools, and the wood lathe i used was my record power coronet herald lathe. i didnt get it the usual finish and it was a yard project so i just finished it with Yorkshire grit and left it with that, the beeswax in that will be plenty good for protec

 

From Firewood to a Bowl Woodturning
By: Elias Klingvall
Video ID: XMfYz0IJwYg
September 28, 2019 · 673 views

I got this piece of Ash from a friends firewood pile it had been lying there for a few months so it was pretty badly cracked but a little epoxy work fixed that and I got a nice natural edged bowl out of it

 

Making a wooden oak bowl
By: tfturning
Video ID: BvfOM0FGhkw
September 27, 2019 · 670 views

Join me while I transform half an oak log into a beautiful little bowl. The pieces was turned from very green wood and dried in the microwave. One week later, sanded and finished in Chestnut products Sanding sealer. The video was shot with a Sony Alpha A7sii at 120fps and edited by a good friend who you will find a link to his IG below. He has a keen eye for shots and the patience of a saint for editing many hours of slow motion footage down into this 4 minute turning highlight reel. The song is called Temerity by Sean Williams. I invite you to subscribe to my channel for more wood turning

 

# 54 Red Coolabar Burr
By: Tony Meadley
Video ID: CzwL_xbhWZM
September 03, 2019 · 658 views

Red Coolabar Burr https://tonymeadley.co.uk/ https://www.tes-uk.co.uk

 

Woodturning: Textured Sweet Gum Bowl
By: Wolf Ridge Woodworking
Video ID: 4_Au-CuDh7w
September 06, 2019 · 638 views

For today's project, I wanted to continue experimenting with different ways of woodturning a bowl and finishing technique. I took a 6' x 3' piece of sweet gum wood and cut it round on the bandsaw. The first task was shaping the outside of the bowl. I kind of just let wood and tools decide the shape of the bowl. With the shape of the bowl finished it was time to address the cracks. I sanded to 240 to get some sawdust to put in the cracks before applying a bit of thin CA glue. This worked like a charm and sealed the cracks right up. I used the Easy Wood Tools Detailer to cut in a line abo

 

Sam Slovak - Turning Horns - Pt 1
By: DentonTurners
Video ID: WZOnFBQuOUY
September 02, 2019 · 637 views

HORNS - HOW TO TURN UNICORN HORNS AND DRAGON'S TEETH Part 1 - Introduction and Turn the First Blank Part 2 - Hollw the First Blank Part 3 - Cut the First Blank in to Segments and Discuss Assembly and Glue Up (Demonstrated in Part 5) Part 4 - Turn the 2nd Blank Part 5 - Sand and Glue Up of the Segments Sam is from Argyle, Tx and has been turning since 2011 following his retirement. In this demo, Sam will provide the steps to turn those unusable 2-3” diameter limbs into hollow spiral cones. AKA unicorn horns for granddaughters or dragon teeth for grandsons Our club meets the first Monday of each month in Denton, Texas in the Center for the Visual Arts (Corner of Hickory and Belle Streets) at 7PM. All are welcome to attend!! http://www.goldentrianglewoodturners.org

 

Cup Centers for the Turning of Spheres
By: Daniel Vilarino
Video ID: NYaY2rzTkl8
September 22, 2019 · 628 views

Hola/Hi! Este video está en Inglés. Si prefieres verlo en Español, por favor haz un click en el enlace que sigue: ***This video is in English*** https://youtu.be/Avy03z5izaE En este video preparo un centro de copa roscado para el cabezal del torno y un centro de copa que forma una funda en un centro giratorio cónico. También demuestro cómo remover los pequeños cilindros de madera que quedan luego de tornear una esfera entre puntas. ***In this video, I make a threaded cup center for the lathe headstock and a cup center that forma a sheath on a conical live center. I also demonstrate how to re

 

Wood Turning a Planter from a Giant Log: Beginner Woodturning Project
By: Cook Woodworks
Video ID: nVgucUDqZSo
September 05, 2019 · 624 views

I wood turned this planter for my wife out of a huge section of a cut down tree near my house. I thought that woodturning a bowl from a big log would be daunting, but it actually wasn't too hard for a beginner like me. There's still lots of wood left over for more bowls and goblets, but to be honest I didn't really like the color and smell(there were definitely some rotten bits) of this log, so it might sit in the corner of my shop waiting for a different woodworking project later on. My tools: Jet Lathe: https://amzn.to/2NSotba Carbide Chisels: https://amzn.to/2NUiEdq Nova Chuck: https://amzn.to/32tJvkm Face Shield: https://amzn.to/2Ac4Cvj Respirator: https://amzn.to/2N7mxfm Miter Saw: https://amzn.to/2ZpjuBW Drill: https://amzn.to/2XtnW0G Square: https://amzn.to/2VaCNzW Clamps: https://amzn.to/2UvPSiZ #woodturning #woodworking

 

Pallet Wood Sphere Inside A Sphere - Episode 214
By: Paul Lockwood
Video ID: NsyoNBXR44g
September 24, 2019 · 611 views

A Sphere inside a Sphere. Not your normal everyday item, especially from Pallet Wood. The Sphere inside is solid, where three slats from a pallet were glued together to create the blank. That was turned in the normal way that I always make spheres. The open segmented Sphere tool a lot more planning. Once the plans were made cutting and preparing all the pieces was nice and easy, just taking time as with any segmented project. To make the sphere as accurate as possible I created a gauge / template to keep checking that I had the correct shape. Everything was sanded to 600 grit and finished

 

Woodturning - Plum log
By: The Welsh Woodman
Video ID: XW8KbG_uTFw
September 13, 2019 · 596 views

Woodturning a plum log from a tree I had to fell in my garden, playing with shapes on the lathe to make something interesting.

 

Long stemmed goblet
By: Wayne the Woodturner
Video ID: 5FG_gXZzC-A
September 18, 2019 · 595 views

Join me live Wednesday 8pm, UK time. Have a chat and hopefully a laugh, I may even do some turning

 

Делаем половину тарелки (Make half a plate)
By: Аleksey Bek
Video ID: X6snYX8w_7c
September 01, 2019 · 588 views

Точим половину тарелки. Сделать все сразу нет времени. Будем точить по частям. Grind half of the plate. There is no time to do everything at once. We'll sharpen it piece by piece.

 

Woodturning: Very Wet Three Corner Bowl
By: Wolf Ridge Woodworking
Video ID: TPkExVKpPqo
September 27, 2019 · 584 views

Today's project shows how you can dry a rough turned bowl in the microwave and how you can turn a three corner bowl. So most of the bowl blanks that I get are green and typically have a moisture content from 20 to 25 percent. They come sealed in wax or Anchor Seal and take forever to dry. So what do you do when you want a finished product without waiting months for it to dry out. There are a bunch of different methods out on the web on how to do it. I wanted to dry the microwave technique as it seems to be the fastest, but you can get mixed results from what I've seen. Try this at your o

 

14 beautiful woodturning How to make any accessories DIY 2019
By: Tony Wood Craft
Video ID: W8inotYH0jE
September 07, 2019 · 583 views

14 beautiful woodturning How to make any accessories DIY 2019

 

Grizzly G0694 lathe
By: earl's small segment shop
Video ID: pWk7a1P-bXs
September 10, 2019 · 577 views

review of my lathe

 

Woodturning a Multi-Coloured Ribbon Platter
By: Stewart Furini
Video ID: 6yaq6uOSWAQ
September 27, 2019 · 575 views

Woodturning - back to a three dimensional look with another variation of my ribbon platter, but this time they're multi-coloured! Colours used are yellow, orange, red and black spirit stains. .................................................... Find me here: Website - https://stewartfuriniwoodturning.co.uk Facebook - https://www.facebook.com/FuriniWoodturning/?ref bookmarks Instagram - https://www.instagram.com/stewartfurini/?hl en Do I need Twitter? .................................................... Please be aware that woodturning is a hazardous activity. These videos are only intended

 

Wood Turning - Charity Platter - Tribute to Grandpa
By: caitlan the cat
Video ID: 64-OSXqKeLE
September 23, 2019 · 570 views

This week I have made a platter which I have decorated with Kidney UK. I made this platter as a tribute to my Grandpa who was being looked after by our local hospital Dialysis Ward. I am going to donate the platter and and proceeds from this video to the ward and I hope that it will help in some way for other people. I hope you enjoy this video and feel comfortable sharing it for others to watch to help me raise as much as I can. Thank you so much. If you would like to see more check out my Facebook Page - https://www.facebook.com/caitlanthecat/ My Instagram - https://www.instagram.com/my_woodturning_creations/ #kidneyresearch #charity #tribute #woodturning #woodworking #maker

 

# 56 Woodturning A Walnut Burr
By: Tony Meadley
Video ID: QOu0-sn1JLs
September 20, 2019 · 523 views

https://tonymeadley.co.uk/ https://www.tes-uk.co.uk

 

# 55 How To Make A Segmented Ring Cut On The Tilt, In Great Detail
By: Tony Meadley
Video ID: MrABWk6HQvg
September 12, 2019 · 522 views

Segmented Ring Cut On The Til https://tonymeadley.co.uk/ https://www.tes-uk.co.uk

 

Woodturning - the swan bowl
By: The Welsh Woodman
Video ID: R-PDdupzQQM
September 20, 2019 · 518 views

Turning a plum crotch piece into a small bowl then whittling a swan handle.

 

Wood Turning Black Walnut
By: Mountain View Turning
Video ID: Z9KvUaS_KUw
September 16, 2019 · 514 views

This is the pice of walnut from amazing wood figure black walnut sawmill to wood turning

 

Sam Slovak - Turning Horns - Pt 3
By: DentonTurners
Video ID: 4kyk9o9eSqU
September 02, 2019 · 506 views

HORNS - HOW TO TURN UNICORN HORNS AND DRAGON'S TEETH Part 1 - Introduction and Turn the First Blank Part 2 - Hollw the First Blank Part 3 - Cut the First Blank in to Segments and Discuss Assembly and Glue Up (Demonstrated in Part 5) Part 4 - Turn the 2nd Blank Part 5 - Sand and Glue Up of the Segments Sam is from Argyle, Tx and has been turning since 2011 following his retirement. In this demo, Sam will provide the steps to turn those unusable 2-3” diameter limbs into hollow spiral cones. AKA unicorn horns for granddaughters or dragon teeth for grandsons Our club meets the first Monday of each month in Denton, Texas in the Center for the Visual Arts (Corner of Hickory and Belle Streets) at 7PM. All are welcome to attend!! http://www.goldentrianglewoodturners.org

 

Wood Turning Tips - Bench Grinder Dust Collection
By: SP Wood Art
Video ID: EqB-I3amIG8
September 20, 2019 · 495 views

One of my dedicated wood turning tips and tricks videos which focuses on bench grinder dust collection then sharpening lathe tools. Hope you enjoy these short tip videos. SPONSORS: TOTALBOAT If you are interested in our sponsor’s product(s), please feel free to visit their site linked below. I highly recommend their products and customer service. If you need assistance with a project or technical advice, give them a call at (401) 396-8199. Totalboat - http://www.totalboat.com Totalboat - High Performance 2:1 Kit http://www.totalboat.com/product/high-performance-21-epoxy-kits/ STARBOND If yo

 

Wood Turning Plywood Bowl
By: Mountain View Turning
Video ID: r9cU93lDLDs
September 07, 2019 · 494 views

Wood turning plywood bowl turned the sound down when turning

 

Experimenting with turning a hybrid Glass and wooden bottle.
By: Woodturning Live With Steve Twydell
Video ID: eh1JubnpvLI
September 19, 2019 · 491 views

This week I am going to try an idea I have had for a while, where i combine wood into a glass bottle. So in theory a hybrid wood and glass bottle !! Lets see if this idea works :-D Come join in the live chat and have some fun asking questions or just chewing the fat with friends. If you would like me to attempt a live project and you have materials or blanks you would like to send me please send them to the address below ! STEVE TWYDELL, PW345466 DPD, PARCEL WIZARD, UNIT 5, TRENCH PARK, TRENCH ROAD, NEWTOWNABBEY, BT36 4LB PLEASE NOTE: IF YOU ARE SENDING ME SOMETHING, PLEASE COULD YOU MARK

 

woodturning 14 beautiful accessories, Creative ideas craft 2019
By: Tony Wood Craft
Video ID: PnnrsEJOsZU
September 19, 2019 · 478 views

This show how to turning skill

 

Woodturning the Vapor Rub Live Edge Bowl
By: Roger Dale Scott
Video ID: 7fXERMwnwCg
September 01, 2019 · 472 views

Woodturning the Vapor Rub Live Edge stinky Bowl was fun. I love wood turning camphor. So, this wood turned bow is turned on the wood lathe from camphor. This wood turned bowl has red highlights spun throughout. I also added my own spin to the camphor. I used my airbrush to make this “RED CAMPHOR”. Fresh camphor smells like Vic's Vapor Rub. Some say it's stinky. I love it! Please help me grow my channel by subscribing and then share this video on your social media. Help me make more videos like this by supporting my channel. Donations are appreciated https://www.paypal.me/woodpops You can pu

 

Wood Turning a Bowl from a Eucalyptus Log
By: Cook Woodworks
Video ID: GtNLi0sSZ2k
September 01, 2019 · 467 views

I turned this bowl on the lathe out of a eucalyptus log I found hiking near my house. Woodturning is a new aspect of woodworking to me, and I'm still a beginner doing beginner projects, but I'm making progress. I FINALLY turned a decent tenon, and the bowl didn't come flying off the lathe this time! Please like and subscribe for more videos of my woodworking and wood turning journey! My tools: Jet Lathe: https://amzn.to/2NSotba Carbide Chisels: https://amzn.to/2NUiEdq Nova Chuck: https://amzn.to/32tJvkm Face Shield: https://amzn.to/2Ac4Cvj Respirator: https://amzn.to/2N7mxfm Miter Saw: https://amzn.to/2ZpjuBW Drill: https://amzn.to/2XtnW0G Square: https://amzn.to/2VaCNzW Clamps: https://amzn.to/2UvPSiZ #woodturning #woodworking Music: Fragments by Sappheiros https://www.youtube.com/channel/UCxLKyBhC6igFhLEb0gxvQNg

 

Woodturning Airbrushing and Crushed Stone Inlay
By: Roger Dale Scott
Video ID: GCa2jcmRHp8
September 08, 2019 · 456 views

In this video I combine Woodturning Airbrushing and Crushed Stone Inlay. Using Infil Stencils supplied by Chroma Craft I add an airbrushed butterfly on a wood turned bowl. A quick lesson from Nick Agar was all I needed. To top it off I inlay crushed stone into the rim. I took an ordinary wood turned bowl and made it extraordinary. Wood turning projects can include airbrushing and crushed stone inlay to make wood turned art. Share my video and subscribe to my channel so I can make more videos about woodturning wood turned art. I DO THIS FOR A LIVING, THANK YOU FOR YOUR SUPPORT! Donations are a

 

Raleigh symposium
By: earl's small segment shop
Video ID: KStdHWnzYo4
September 14, 2019 · 445 views

What happened at the symposium

 

Sam Slovak - Turning Horns - Pt 2
By: DentonTurners
Video ID: -sOIEZuXV7Y
September 02, 2019 · 442 views

HORNS - HOW TO TURN UNICORN HORNS AND DRAGON'S TEETH Part 1 - Introduction and Turn the First Blank Part 2 - Hollw the First Blank Part 3 - Cut the First Blank in to Segments and Discuss Assembly and Glue Up (Demonstrated in Part 5) Part 4 - Turn the 2nd Blank Part 5 - Sand and Glue Up of the Segments Sam is from Argyle, Tx and has been turning since 2011 following his retirement. In this demo, Sam will provide the steps to turn those unusable 2-3” diameter limbs into hollow spiral cones. AKA unicorn horns for granddaughters or dragon teeth for grandsons Our club meets the first Monday of each month in Denton, Texas in the Center for the Visual Arts (Corner of Hickory and Belle Streets) at 7PM. All are welcome to attend!! http://www.goldentrianglewoodturners.org

 

Turning an Egg Box
By: Tod Raines
Video ID: JMMks9YUjF8
September 07, 2019 · 418 views

Produced by Tod Raines of Woodturning Tool Store on September 7th, 2019 In this video I take two separate demonstration pieces and create an egg shaped box. Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Instagram: https://www.instagram.com/traines64

 

Playing with Multi Axis turning (Inspired by Barbara Dill)
By: Woodturning Live With Steve Twydell
Video ID: QGyw8G73YdI
September 23, 2019 · 416 views

This week I am going to be playing with Multi Axis turning, a technique inspired by Barbara Dill. You can find her links below !! Feel free to join in and try what I do while you watch !! Come join in the live chat and have some fun asking questions or just chewing the fat with friends. If you would like me to attempt a live project and you have materials or blanks you would like to send me please send them to the address below ! STEVE TWYDELL, PW345466 DPD, PARCEL WIZARD, UNIT 5, TRENCH PARK, TRENCH ROAD, NEWTOWNABBEY, BT36 4LB PLEASE NOTE: IF YOU ARE SENDING ME SOMETHING, PLEASE COULD YO

 

Sam Slovak - Turning Horns - Pt 4
By: DentonTurners
Video ID: kGAJ4K_vb1c
September 02, 2019 · 415 views

HORNS - HOW TO TURN UNICORN HORNS AND DRAGON'S TEETH Part 1 - Introduction and Turn the First Blank Part 2 - Hollw the First Blank Part 3 - Cut the First Blank in to Segments and Discuss Assembly and Glue Up (Demonstrated in Part 5) Part 4 - Turn the 2nd Blank Part 5 - Sand and Glue Up of the Segments Sam is from Argyle, Tx and has been turning since 2011 following his retirement. In this demo, Sam will provide the steps to turn those unusable 2-3” diameter limbs into hollow spiral cones. AKA unicorn horns for granddaughters or dragon teeth for grandsons Our club meets the first Monday of each month in Denton, Texas in the Center for the Visual Arts (Corner of Hickory and Belle Streets) at 7PM. All are welcome to attend!! http://www.goldentrianglewoodturners.org

 

Hello #2
By: Rich McNatt
Video ID: ORq3qKj3ylU
September 21, 2019 · 410 views

 

Wood Turning Spalted Maple Bowl
By: Mountain View Turning
Video ID: IWKq7Mu2p4E
September 20, 2019 · 409 views

Best looking spalted maple bowl

 

Wood Turning Checkedboard Bowl
By: Mountain View Turning
Video ID: ctmJnJ-NGpA
September 25, 2019 · 406 views

Wood Turning Checkedboard Bowl

 

Helloooo, is this thing on?
By: Rich McNatt
Video ID: IMQCfA_H2aY
September 19, 2019 · 396 views

 

Production of a Segmented Dizzy Platter
By: SIS Woodworking
Video ID: Uy9id2vxGbw
September 20, 2019 · 389 views

In this video we combine the techniques for producing a Dizzy pattern bowl with segmenting to produce a Segmented Dizzy Platter. A Laminated board with 65 layers of contrasting woods is sliced into 6 segments. The 6 segments are glued together with a 0.100' thick Padauk spacer between each wedge to produce the segmented dizzy pattern for the base of the platter. A 4 layer segmented rim with 48 segments per layer is then added to the top of the platter.

 

Wood Turning Poplar finger Joint Bowl ( Stoner Bowl )
By: Mountain View Turning
Video ID: R1UkI-woQNM
September 01, 2019 · 385 views

Wood Turning Poplar finger Joint Bowl ( Stoner Bowl )

 

Woodturning (A BABY RATTLE SPINNING TOP) for my Patron's new baby boy !!
By: Woodturning Live With Steve Twydell
Video ID: 2C8-h_o4bXI
September 15, 2019 · 377 views

This week I will attempt to woodturn a baby rattle with a difference. My plan is to make a baby rattle than can then double as a spinning top once the child gets older. Come join in the live chat and have some fun asking questions or just chewing the fat with friends. If you would like me to attempt a live project and you have materials or blanks you would like to send me please send them to the address below ! STEVE TWYDELL, PW345466 DPD, PARCEL WIZARD, UNIT 5, TRENCH PARK, TRENCH ROAD, NEWTOWNABBEY, BT36 4LB PLEASE NOTE: IF YOU ARE SENDING ME SOMETHING, PLEASE COULD YOU MARK A LOW VALUE

 

Making an oak winged bowl on the lathe.
By: tfturning
Video ID: 48c1WsGi75I
September 05, 2019 · 377 views

The start to finish making of an Oak winged bowl. I love turning these pieces. They are just the right amount of fun and danger to keep you on your toes. There was a gap of about a week between rough turning and final sanding and finishing on this piece as the blank was very green when I first shaped it. This in between period I spent drying the bowl using the microwave method, 20-30 seconds on full power, cool, repeat. During this process the bowl went from 255g down to just under 180g. I then used Chestnut Products Sanding Sealer and a final coat of a homemade blend of beeswax and jojoba oil to finish it off. I also created the music to accompany the process. Please feel free to comment, like and subscribe for more content like this. Thanks for watching. *This is not an instructional how-to video, this is just how I made this piece.

 

Explanation Turning a Sphere Using Three Axes
By: Daniel Vilarino
Video ID: a1vJU_Rk4Rs
September 27, 2019 · 377 views

Explanation of how to turn a sphere using the three axes method. Hi my friends! I have seen a few videos showing this method for turning a sphere using the three axes method, also known as the three rotations method. Here are some good videos that depict this method. Alan Stratton 'As Wood Turns' https://www.youtube.com/watch?v 3lConTQ-cUw Mike Peace Woodturning https://www.youtube.com/watch?v jYnbWbxVcVI Frank Howarth 'Frank makes' https://www.youtube.com/watch?v wZ7yfkBbsiw Dread Knot Woodshop https://www.youtube.com/watch?v ZM26MkUohMw Miguel Sanchez: https://www.youtube.com/watch?v

 

Pallet Wood Table Legs - Episode 213
By: Paul Lockwood
Video ID: PP73xFE4Qv4
September 17, 2019 · 366 views

Using the slats you find on pallets, I've glued three pieces together and then cut these on the table saw at around 47mm square. They were tacked with brad nails in three places which means any turning has been planned with this. There were a total of 16 legs to turn to make small tables for garden furniture. Basic turnign between centres with the skew. I did get a couple of catches along the way which meant slight modifications that aren't visible unless you hold the pieces next to each other to compare them. Being pallet wood they have that rustic feel and do not need to be precise in thei

 

Sam Slovak - Turning Horns - Pt 5
By: DentonTurners
Video ID: egELo3lwRl4
September 02, 2019 · 341 views

HORNS - HOW TO TURN UNICORN HORNS AND DRAGON'S TEETH Part 1 - Introduction and Turn the First Blank Part 2 - Hollw the First Blank Part 3 - Cut the First Blank in to Segments and Discuss Assembly and Glue Up (Demonstrated in Part 5) Part 4 - Turn the 2nd Blank Part 5 - Sand and Glue Up of the Segments Sam is from Argyle, Tx and has been turning since 2011 following his retirement. In this demo, Sam will provide the steps to turn those unusable 2-3” diameter limbs into hollow spiral cones. AKA unicorn horns for granddaughters or dragon teeth for grandsons Our club meets the first Monday of each month in Denton, Texas in the Center for the Visual Arts (Corner of Hickory and Belle Streets) at 7PM. All are welcome to attend!! http://www.goldentrianglewoodturners.org

 

Octagon Fountain Pen Jig
By: Gabe Castro
Video ID: ICapOsrUI9o
September 26, 2019 · 337 views

Home made Octagon Fountain Pen Jig for the Drill Press.

 

Pens of the week #1
By: Gabe Castro
Video ID: mwZtyVXUVDc
September 04, 2019 · 318 views

Showcasing some pens that need mentioning.

 

Woodturning A Mahogany Lidded bowl
By: jp woodwork
Video ID: siPs913grK8
September 26, 2019 · 313 views

UPDATE: You Fantastic people decided on calling it a Chip and Dip bowl In Workshop today this weeks project i made bowl, lidded pot, lidded bowl whatever you want to call it thing from a mixture of 3 woods, first of all i started off by turning the main bowl from Mahogany then i turned a zebrawood lid and yes i did make a minor mistake but i was able to recover it luckily and then i finished it all off with a pear wood finial all was sanded up to 240 and then finished with Yorkshire grit original and woodturned with my Easy wood tools carbide turning tools on my Record Power Coronet herald wo

 

Turned desk pen holder
By: Gabe Castro
Video ID: l5owR5YozzI
September 19, 2019 · 311 views

Turned Curly Maple Desk pen holder

 

Woodturning Segmented Bowl
By: Wood Workshop
Video ID: EmuOHgbGTCc
September 23, 2019 · 311 views

Welcome to this week's woodturning project! I've experimented a bit with different types of wood. At the end,the chess like pattern turned out fine, but the plywood didn't. Hope you enjoy the video! DISCLAIMER The Videos are for ENTERTAINMENT purposes only! Always follow your manufacturers guidelines and safety instructions! If you're hesitating about using the techniques, which we use. DO NOT try them.

 

#73 - Wood/Resin Collab Bowl - with Jen's Woodworking & Things
By: Billy Burt
Video ID: AlOVwVnG_-k
September 21, 2019 · 303 views

Jen at Jen's Woodworking & Things started this bowl a few weeks ago and was having issues with it. She got frustrated and asked me if I'd be willing to do a collaboaration project and finsh it. I told her I'd be happy to give it a try and this video is the result. Thanks for watching. Please Like, Subscribe and Share. You can support the Messy Studio by visiting my web site and purchasing merchandise, or follow the link to my Amazon store. You get the same great value, but Amazon sends me a few cents for every purchase. Thanks! Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com https://acdcreations.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ Ack's Abrasive Paste https://ackswoodpaste.com If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://acdcreations.com/shop/ #collabturning #turnedhydbridbowl #resinandwoodbowl

 

Woodturning Cracked Oak Log
By: Wood Workshop
Video ID: _Gi1DEZ6w1k
September 16, 2019 · 302 views

Welcome to today's woodturning project! I didn't have a lot of resin left, so i decided to put all the resin i had in the cracked log, which became a nice fruit bowl with a stand. DISCLAIMER The Videos are for ENTERTAINMENT purposes only! Always follow your manufacturers guidelines and safety instructions! If you're hesitating about using the techniques, which we use. DO NOT try them.

 

Wooden Pear Made From Portuguese Olive Wood
By: Tony Meadley
Video ID: NcM-uh2sDts
September 27, 2019 · 300 views

https://tonymeadley.co.uk/ https://www.tes-uk.co.uk

 

#25 390 segment Flower petal bowl
By: Mike T
Video ID: lxYQ0ebXm3c
September 13, 2019 · 299 views

Building and turning my most elaborate segment bowl yet. 14x6inch, 390 segments, 13 rings made from maple, black walnut and cherry. Finished with General Finish's wood bowl finish Check out my new Etsy: https://www.etsy.com/shop/MiJean123 Facebook: https://www.facebook.com/Trainersturning/ Music by Ben Sound

 

Woodturning- pecan glencairn
By: Rons Woodturning shop
Video ID: Ynn00GNyQCw
September 14, 2019 · 298 views

Fun little project in my small shop!

 

Woodturning Fail! Making a Goblet Goes Wrong
By: Cook Woodworks
Video ID: S_1J2_kmAKg
September 09, 2019 · 293 views

Wood turning a simple goblet does not go how I planned in this video. I thought this would be an easy woodworking project, but I was wrong! I found this log hiking, and was hoping it might look nice once I got it on the lathe. I kept being optimistic that if I got past the rot it would turn out ok. Instead I ended up making a very small goblet out of the semi-usable wood. It's an easy lesson as a beginner woodturner and woodworker, and I still got a goblet out of the deal! My tools: Jet Lathe: https://amzn.to/2NSotba Carbide Chisels: https://amzn.to/2NUiEdq Nova Chuck: https://amzn.to/32tJvkm Face Shield: https://amzn.to/2Ac4Cvj Respirator: https://amzn.to/2N7mxfm Miter Saw: https://amzn.to/2ZpjuBW Drill: https://amzn.to/2XtnW0G Square: https://amzn.to/2VaCNzW Clamps: https://amzn.to/2UvPSiZ

 

Frank Bowers Turning His Poor Man Hollow Vase
By: Palmetto Woodturners
Video ID: 2L1530Zi1mo
September 10, 2019 · 268 views

Frank Bowers shared with Palmetto Woodturners his poor man hollowing of a vase.

 

Infinity ink pen and dp pen
By: Lassen Lathe Works
Video ID: yA982zTMCpE
September 15, 2019 · 260 views

Check out more of my work on my Facebook group https://www.facebook.com/groups/2018213188295301/?ref share

 

Pens of the week #2
By: Gabe Castro
Video ID: lojuQjhLXpE
September 13, 2019 · 259 views

Pens that I liked!

 

Wood Turning Live Edge Maple Bowl
By: Mountain View Turning
Video ID: bZ-G6GC4aR0
September 05, 2019 · 258 views

Wood Turning Live Edge Maple Bowl

 

Secrets of Successful Texturing on Platters and Bowls
By: Windy City Woodturners
Video ID: dDXXIKFFclU
September 10, 2019 · 255 views

Bob Bergstrom shares his knowledge of texturning on bowls wih the Sorby Mini Texturing Tools. He guides the viewer through various techniques to successfully apply a variety of textured markings on a bowl. Using three supplied wheels he demoes texturing on the rim, outside, bottom and rim of the bowls and platters.

 

Тарелка под фрукты часть 2 (Fruit plate part 2)
By: Аleksey Bek
Video ID: mzoxDtDtUlw
September 03, 2019 · 242 views

Заканчиваем начатую ранее работу с тарелкой. Вот что получилось. Finish the work started earlier with a plate. That's what happened.

 

#72 - Awesome DIY Turned Carver's Mallet - How I did it
By: Billy Burt
Video ID: VnXvfXiFRD0
September 12, 2019 · 241 views

In this episode I turn a carver's mallet from Texas Ebony and figured Bocote. This mallet should serve me well for many years. Watch to see how I did it. Since both woods are naturally oily, I finished it with a wax/oil combination. Thanks for watching. Please Like, Subscribe and Share. You can support the Messy Studio by visiting my web site and purchasing merchandise, or follow the link to my Amazon store. You get the same great value, but Amazon sends me a few cents for every purchase. Thanks! Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com https://acdcreations.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ Ack's Abrasive Paste https://ackswoodpaste.com If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://acdcreations.com/shop/ #DIYcarversmallet #turnedcarversmallet #howtoturnacraversmallet

 

#71 - How to Turn a Heart-shaped Pendant - With a little power carving help
By: Billy Burt
Video ID: 2xUkgVHWzE0
September 03, 2019 · 234 views

In this episode I turn a pecky Cypress pen blank into a heart-shaped pendant. This is a multi-axis turning followed by a small amount of power carving and hand sanding. But it turned out as well as I was hoping it would. Chances are I'll be asked to make more of these in the future. Finished with 4 coats of Deft gloss spray lacquer. Thanks for watching. Please Like, Subscribe and Share. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com https://acdcreations.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harne

 

Wood Turning Red Oak Crotch Platter
By: Mountain View Turning
Video ID: Qh4JYwOpaTA
September 13, 2019 · 234 views

Wood Turning Red Oak Crotch Platter

 

Wood Turning Mortar & Pestle with my Wife! - Beginner Woodturning Project
By: Cook Woodworks
Video ID: g8BabmOfGbQ
September 16, 2019 · 230 views

Had a good time wood turning this mortar and pestle with my wife. I'm a beginner, and she's brand new, but this was a pretty easy project as far as woodworking goes. The lathe can be a bit scary sometimes for a beginner, but the carbide tools and chisels make it a little easier. She did great and we're really happy with how it turned out! The mortar is walnut, and the pestle is imbuia. Thanks for watching! Please share this video if you enjoyed it! My tools: Jet Lathe: https://amzn.to/2NSotba Carbide Chisels: https://amzn.to/2NUiEdq Nova Chuck: https://amzn.to/32tJvkm Face Shield: https://amzn.to/2Ac4Cvj Respirator: https://amzn.to/2N7mxfm Miter Saw: https://amzn.to/2ZpjuBW Drill: https://amzn.to/2XtnW0G Square: https://amzn.to/2VaCNzW Clamps: https://amzn.to/2UvPSiZ

 

Beginners series episode 3 Turning a lidded box !
By: Woodturning Live With Steve Twydell
Video ID: sfzZ5m7GQMg
September 26, 2019 · 229 views

This is episode three of the beginners series !! After a short break I am back to the beginners live shows, and this week I am going to demonstrate how to turn a lidded box. Come join in the live chat and have some fun asking questions or just chewing the fat with friends. If you would like me to attempt a live project and you have materials or blanks you would like to send me please send them to the address below ! STEVE TWYDELL, PW345466 DPD, PARCEL WIZARD, UNIT 5, TRENCH PARK, TRENCH ROAD, NEWTOWNABBEY, BT36 4LB PLEASE NOTE: IF YOU ARE SENDING ME SOMETHING, PLEASE COULD YOU MARK A LOW

 

Tom Hoult The Art of Embellishment
By: Palmetto Woodturners
Video ID: o3OkT2eRijQ
September 10, 2019 · 227 views

Tom Hoult a member with the Palmetto Woodturners demonstrated his techniques and how to use different embellishment products on his woodturning. Tom has only been turning for 2 years when he decided to get into woodturning and he works at every day.

 

Maui Woodturners Association
By: KEA Woodturning Studio Hawaii
Video ID: zTIZitA-2G0
September 16, 2019 · 224 views

Artists in Profile, a TV series to be shown on Akaku public television channel. Emiliano Achaval, is the first in the series

 

Wood Turning Red Oak Flooring
By: Mountain View Turning
Video ID: 39_TjXeqRX4
September 19, 2019 · 221 views

Don't now what happened to the front of the video

 

Wood Turning Processing a Birch Log Into Bowl Blanks for Turning on a Wood Lathe.
By: Turning Round
Video ID: N6-N0SNpiMA
September 25, 2019 · 211 views

Wood Turning Processing a Birch Log Into Bowl Blanks. In wood turning getting free wood is the best kind of wood. I have two Birch tree logs that are about 4 feet long and 12 inches in diameter. In this wood turning video I turn them into usable wood turning blanks using my Huskavarna Chain saw. The process is pretty simple cut the end of the log off until the crack are gone, then cut the log to a length that about 2 inches longer than the diameter. Then cut the log in half right down the Pith.

 

Wood Turning Western Red Cedar
By: Mountain View Turning
Video ID: CaUc-WOAVAM
September 14, 2019 · 207 views

Wood Turning Western Red Cedar

 

Wood Turning Coasters with Carbide Tools
By: Cook Woodworks
Video ID: T5d--sWQFvU
September 11, 2019 · 207 views

I woodturned these coasters out of imbuia wood my friend gave me. It's a really easy beginner project on the lathe, and I'm really happy how they turned out! My cuts with the carbide tools are finally starting to get a little cleaner too, so I feel like I'm getting better at wood turning basics. Woodworking with exotic wood can be really fun. My tools: Jet Lathe: https://amzn.to/2NSotba Carbide Chisels: https://amzn.to/2NUiEdq Nova Chuck: https://amzn.to/32tJvkm Face Shield: https://amzn.to/2Ac4Cvj Respirator: https://amzn.to/2N7mxfm Miter Saw: https://amzn.to/2ZpjuBW Drill: https://amzn.to/2XtnW0G Square: https://amzn.to/2VaCNzW Clamps: https://amzn.to/2UvPSiZ

 

Another Wood Turning Resin Fail!
By: Cook Woodworks
Video ID: MhD3DbtBlPo
September 27, 2019 · 201 views

Wood turning takes patience. Wood turning with resin takes planning. Especially as a beginner. This project was a big fail because I didn't keep that in mind. My plan was to suspend a pinecone in resin and then use my carbide woodturning tools to shape it into a snow globe on the lathe. I couldn't find my hot glue gun and ran out of patience looking, so I tried wood glue. Fail! Then I didn't have the patience to wait for the first layer of resin to dry before putting the pine cone on top. Fail! The result was mess, but I finished the project for the practice, and to add it to my hall of shame! My tools: Center Finder: https://amzn.to/2ld06Ju Jet Lathe: https://amzn.to/2NSotba Carbide Chisels: https://amzn.to/2NUiEdq Nova Chuck: https://amzn.to/32tJvkm Face Shield: https://amzn.to/2Ac4Cvj Respirator: https://amzn.to/2N7mxfm Miter Saw: https://amzn.to/2ZpjuBW Drill: https://amzn.to/2XtnW0G Square: https://amzn.to/2VaCNzW Clamps: https://amzn.to/2UvPSiZ #woodturning #woodworking #resin

 

10,000 Pots of Hampshire Sheen Made in 2019 - A Sneaky Peek into How its Made.
By: Hampshire Sheen
Video ID: DVHdTK4VmBQ
September 03, 2019 · 195 views

September 2nd 2019 - Wow! I can scarcely begin to say thank you for your custom and support over the last 4 years as I cruise towards pouring the 10,000th pot of Hampshire Sheen finishing wax wood polishes in 2019! In this video, I give you a little peak into the manufacturing process because every pot is STILL made entirely by hand in the UK using UK sourced materials and containers. To find your nearest supplier, check out the website at www.hampshiresheen.com/buy

 

Longworth Chuck Type 2 Combo & Solid Ring Set
By: Ron Brown
Video ID: DtgxAhzETSA
September 18, 2019 · 190 views

Ron Brown introduces the Longworth Chuck and the solid rings for turners needing to work on the bottoms of turned items. More info at www.ronbrownsbest.com

 

Woodturning The Māori Paua Lizard Bowl
By: Roger Dale Scott
Video ID: BQSI4ch5CHI
September 22, 2019 · 184 views

Woodturning The Māori Paua Lizard Bowl is the first video in a series of four. This wood turned bowl has a crushed stone inlay New Zealand lizard on it. This wood turned bowl also has a crushed stone inlay rim. The second video is Woodturning with Woodpops Carving the Paua Lizard. The third is Woodturning with Woodpops Inlaying the Paua Lizard. The fourth is Woodturning with Woodpops inlaying the Paua Lizard Bowl Rim. If you are a wood turning fan you must watch all four. Help me make more videos like this by supporting my channel. Donations are appreciated https://www.paypal.me/woodpops Pur

 

Wood Turning a Tiny Carving Mallet: Beginner Woodturning Project
By: Cook Woodworks
Video ID: UUssJNzbokw
September 06, 2019 · 179 views

I tried to woodturn something small and fun out of some imbuia wood my friend gave me. It's not the most practical woodworking project, but it was fun beginner practice, and hopefully it will help when I wood turn a full size mallet in the future. What is this, a mallet for ANTS?!?! My tools: Jet Lathe: https://amzn.to/2NSotba Carbide Chisels: https://amzn.to/2NUiEdq Nova Chuck: https://amzn.to/32tJvkm Face Shield: https://amzn.to/2Ac4Cvj Respirator: https://amzn.to/2N7mxfm Miter Saw: https://amzn.to/2ZpjuBW Drill: https://amzn.to/2XtnW0G Square: https://amzn.to/2VaCNzW Clamps: https://amzn.to/2UvPSiZ #woodturning #woodworking

 

Wood Turning Maple Clown Bowl
By: Mountain View Turning
Video ID: 9imWKauKXPE
September 10, 2019 · 179 views

Wood Turning Maple Clown Bowl

 

Woodturning: Live Edge Maple Burl & Ziricote
By: David Adamsen
Video ID: ODwx3dIhK8E
September 06, 2019 · 175 views

Thanks for watching! This is my second filmed project, and it was a challenging piece. I have been woodturning since January 2019 and I am entirely self-taught, unless learning from other YouTubers counts. For some reason, the ziricote wood kept chipping, and I had to keep rethinking the shape. The inside of the maple burl hollowform is not sanded, but finished (as shown) with a thick coat of Howard Beeswax and Orange oil. At around minute 14:00, I sped up the footage in some cuts to around 1000%-1500%, since the finial took around 3 hours to complete. The chip in the base of the finial happened so close to the chuck that I was afraid of damaging either the chuck or the finial if I used CA glue with shavings to fill it. Lessons learned... Please consider subscribing! Also, please comment, like, and share the video as it will help my channel grow! If interested, check out my Etsy store: https://www.etsy.com/shop/AdamsenWoodcraft Thank you!

 

Yarn bowl - a gift for my wife
By: Second life of wood-turning
Video ID: I451TA8gfa0
September 20, 2019 · 174 views

I have made this yarn bowl for my wife becouse She bought me a lathe for my birthday. I'm very happy as You can see on video My wife loves sewing, knitting and stitching and I thought that will be very good gift idea

 

Woodturning For Beginners - Easy Project
By: Wood Workshop
Video ID: TeOInBNEdjw
September 02, 2019 · 170 views

Hey guys! This project is perfect for people,who are just starting out with woodturning. Even though it's easy and simple to make, it looks pretty cool! I hope you enjoy the video! Leave a like and subscribe to support the channel. DISCLAIMER The Videos are for ENTERTAINMENT purposes only! Always follow your manufacturers guidelines and safety instructions! If you're hesitating about using the techniques, which we use. DO NOT try them.

 

Jurassic Park Walkstick - Woodturning
By: Second life of wood-turning
Video ID: KuVUotrmnLk
September 18, 2019 · 166 views

 

Caja roscada de Mpingo- Blackwood threaded box
By: Mauricio Kolenc Woodturning
Video ID: p1ZeYSncl8I
September 25, 2019 · 163 views

Video filmado por Adam Luna en su visita a Montevideo. Está centrado en las técnicas básicas y posturas de manos para el trabajo de maderas duras. Estoy trabajando con 1 ojo y 'medio' asi que es posible notar cierta torpeza en el trabajo.

 

Talking Turning and Tea ShedFest 2019
By: Blind Woodturner
Video ID: veoEJ83VBRY
September 06, 2019 · 161 views

 

Two pints of lager (& a steady rest)
By: Miss Tee's Woodturning
Video ID: 4yrHBawH3is
September 06, 2019 · 158 views

I was going to call this video 'Two pints of lager & a packet of crisps please' after the song by SPLODGENESSABOUNDS. But it's as much about my homemade steady rest as it is turning a classic lager glass shape from a piece of an old Sumac Staghorn tree that died around 15 years ago and has been buried and forgotten in the undergrowth that passes for my garden for almost as long. Many thanks to my good friend Josev King for the original idea and design of the steady rest in the first place. You can find me on Facebook @MsTeeswoodturning and Instagram msteeswoodturning

 

Tappi di bottiglia al tornio - Bottle tops on the lathe
By: Mauro il tornitore
Video ID: fanPAs4eEBI
September 06, 2019 · 152 views

Some idea for bottle tops on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Come ho realizzato alcuni tappi di bottiglia al tornio. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

herb cutter / mezzaluna / ulu kit
By: Prokraft
Video ID: WldcyBrmgP0
September 17, 2019 · 151 views

See how to make the Prokraft herb cutter or mezzaluna kit and also how to make it into an ulu with 1 single handle. This is a low cost fun kit to make a slightly different kitchen tool. The link to the product page is here: https://www.prokraft.co.uk/herb-cutter-mezzaluna-ulu-woodturning-kit.html

 

woodturning a spalted mystery bowl (quick sticker update)
By: woodworking 220-7
Video ID: WK-1cWQUivs
September 15, 2019 · 151 views

OOPS I goofed but i think I recovered just fine. Please visit these great YouTube channels Kim Tippin @ https://www.youtube.com/channel/UChOkCqsbNr6K1RYi9Sadb5Q/featured And Mike Waldt@ https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w If you would like to send me your logo sticker or anything else please send to: woodworking220-7 PO BOX 745 Kenilworth NJ 07033

 

Part 1 of 2 - Larry Cronkite - Pen Turning and Assembly
By: West Georgia Woodturners
Video ID: u45gp4JGBCc
September 14, 2019 · 147 views

Larry Cronkite demonstrates his pen making process. He demonstrates preparing the blanks, turning on lathe, finishing and assembly.

 

Rough turning an Oak bowl.
By: tfturning
Video ID: p88TcmLYM2A
September 01, 2019 · 141 views

Started a little wobbly due to the log being mounted slightly off balance, once the corners had been knocked off normal service was resumed. Most of the footage is a 8x normal speed. Now this bowl is off to the microwave for a drying cycle before I sand and finish with beeswax. Thanks for watching please like and subscribe :)

 

Turnings for Christmas part 1
By: earl's small segment shop
Video ID: y9AibXDw1NA
September 29, 2019 · 139 views

Making Christmas turnings for a friend

 

Woodturning with Woodpops YouTube Channel Trailer
By: Roger Dale Scott
Video ID: _ZoOZFSazZE
September 16, 2019 · 138 views

This is Woodturning with Woodpops YouTube Channel Trailer. On this channel I share how ordinary wood turnings can be made extraordinary with a little artistic embellishment. Watch as I create each ordinary piece on the wood lathe. See them transformed with artistic embellishment into extraordinary woodturning art. I will share in detail from start to finish my processes and techniques. You don’t have to be an artist or an expert. In fact I am not an expert. I am still learning. Please subscribe and hit the bell to see what I learn next. I have been woodturning about 12 years. Eleven of those

 

Wood Turrning Close Up Bowl Turning DIY
By: Mountain View Turning
Video ID: qXIOZUW-26s
September 01, 2019 · 137 views

Close up bowl turning DIY do speed the videos up 2x

 

WOODTURNING SPALTED PUNKY MAPLE (FIRST VIDEO)
By: Villy woodturning
Video ID: W-BEDZVpz04
September 05, 2019 · 135 views

They was a fun turning im not fan of turning side grain but this one was easy to turn. I have a lot of this wood and the grain is so nice leave a comment ... the bowl is good too drying now thanks for watching , happy turning

 

Wood Turning Pine Comb Epoxy Life saver
By: Mountain View Turning
Video ID: aXkJRFttSjQ
September 22, 2019 · 135 views

Wood Turning Pine Comb Epoxy Life saver

 

Farfalle di frassino - Ash butterflies
By: Mauro il tornitore
Video ID: rDl94r-YEu0
September 27, 2019 · 133 views

How I made wooden butterflies. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Come ho realizzato farfalle in legno. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Beginner Wood Turning Project: Resin & Palm Frond Plate
By: Cook Woodworks
Video ID: blNYvmavf0U
September 28, 2019 · 132 views

I finally turned resin on my small lathe and it wasn't a compete fail! I have been wanting to try wood turning palm fronds for a while, so I started small by adding a few to resin to make a small plate. I poured the resin in several layers and put it in the pressure pot each time, and it came out almost crystal clear. The carbide tools worked amazing on the resin too. It's easy to get discouraged as a beginner wood turner, even on easy projects, so it was nice to have something finally go to plan. My tools: Center Finder: https://amzn.to/2ld06Ju Jet Lathe: https://amzn.to/2NSotba Carbide Chisels: https://amzn.to/2NUiEdq Nova Chuck: https://amzn.to/32tJvkm Face Shield: https://amzn.to/2Ac4Cvj Respirator: https://amzn.to/2N7mxfm Miter Saw: https://amzn.to/2ZpjuBW Drill: https://amzn.to/2XtnW0G Square: https://amzn.to/2VaCNzW Clamps: https://amzn.to/2UvPSiZ #woodturning #woodworking #resin Music: Lights by Sappheiros https://soundcloud.com/sappheirosmusic

 

Turning a Scraps and Resin Bowl Pt. 2
By: Jen's Woodworking & Things
Video ID: Zbg77RL4nnM
September 01, 2019 · 127 views

I took the offcut/scraps from my previous projects, put them in a container, and poured resin on them. The first video went ok. I was pretty happy with where it left off. This week didn't go as well. ************ If you're a maker and you'd like to participate in my 1 Year YouTube Anniversary project, please send me a pen size blank up to 1' x 1' x 5 ' (not drilled) of wood, resin, anything equally sandable and turnable that represents you. Any that are undersize I will encase in a tiny layer of clear resin to achieve uniformity. Any that are slightly oversize I will sand down. Don't forget to include your name and media Info so I know who it's from! My goal is to represent my new Maker Family in one piece. #JensAnniversaryCollab I'm also making a sticker board if you'd like to swap. StringsNBlingz Jen's Woodworking&Things P.O. Box 25314 Rochester, NY 14625 USA

 

Wood Turning: Hollowing out a Chalice with Carbide Tools
By: Cook Woodworks
Video ID: Kh6k7A2OKZ8
September 10, 2019 · 127 views

This was the first chalice or goblet I woodturned on my new lathe, but unfortunately I lost the first half of the footage where I roughed out the chalice from a log. So this video shows me hollowing out the goblet using my carbide tools / chisels. This is an easy wood turning project for a beginner, so if you're a woodworker with a lathe, give it a try!

 

Come Shopping with Us For Amazingly Beautiful Wood!
By: Jamie Ferrell Woodturning
Video ID: A79CLIUdn4c
September 17, 2019 · 121 views

 

A Prokraft bottle stopper with coin inset
By: Miss Tee's Woodturning
Video ID: eTAjGIe-WQM
September 21, 2019 · 118 views

This video is a little longer than I planned. Even then the camera cut out just at the end and I didn't notice. Still, I covered most of my finishing process. The final polish was a hard caranuba wax to give it more protection and is the finish I used on my pens. Prokraft are a small supplier but have a lot of unusual and interesting kits for your woodturning projects. www.prokraft.co.uk

 

Walnut Platte - Timelaps
By: B.W. Woodturning
Video ID: ZNJ1B3CmJOw
September 29, 2019 · 115 views

A rainy day at the workshop. Nothing better then turning wood and enjoy my self. Sanded to 800grit and Yorkshire Grit. Polished with One-way Tripoli, white diamond and finished with Canauba Wax.

 

Victorian style bowl - Woodturning
By: Second life of wood-turning
Video ID: S44giv5LQ94
September 23, 2019 · 112 views

Piece of maple which I had use to my presentation proved to be a really nice bowl. When I finished turning and put this bowl on the table it seems to me a couch from Victorian period I'm proud of myself

 

Turned Oak fence post to clamshell glasses (specs) case woodturning by AMC77
By: AMC77 Handmade
Video ID: SXBi0XbY6fA
September 05, 2019 · 111 views

In this video I get adventurous and try something different! I take an old fence post and give it a new lease of life, making a clamshell specs case. I use shellac sanding sealer then enhance the grain with Tudor black stain followed by Danish oil. You can see more of my handmade items including industrial steampunk lamps & more here https://www.pinterest.co.uk/AMC77Handmade

 

Woodturning: Gorgeous Fiddleback Box Elder!
By: David Adamsen
Video ID: _u-bRU9dP-Y
September 19, 2019 · 111 views

Thanks for watching and subscribing! This is my 4th recorded project, and it was a fun one! I'm becoming more comfortable with the bowl gouge, especially when hollowing. Thankfully, this piece never flew across the room, in spite of the catches. Between sanding grits, I was continually cleaning the dust with denatured alcohol because the dust was somewhat sticky! I'm fairly inexperienced with boxelder, but it has a unique consistency. This piece had amazing fiddleback figure and a few streaks of red flame. I really appreciate all my subscribers! If you're not already a subscriber, please consider becoming one! Also, please like and comment on the video as it will help my channel grow! All the music used came from: https://www.epidemicsound.com/ If interested, check out my Etsy store: https://www.etsy.com/shop/AdamsenWoodcraft Thank you!

 

woodturning lidded box failure
By: Villy woodturning
Video ID: EqMrpARSWWI
September 06, 2019 · 110 views

this is what happens when you go to fast on the lathe almost done but get a big catch so the piece break

 

Tips and tricks for the pen turner
By: Lassen Lathe Works
Video ID: uMlNTtB4M-o
September 24, 2019 · 110 views

 

wood turning a Walnut and oak bowl
By: The Riggs workshop
Video ID: Lh9NyQV6yiA
September 15, 2019 · 105 views

 

Turned Oak oil filter / Lidded pot now with acorn embellishment! Woodturning by AMC77
By: AMC77 Handmade
Video ID: J4pXhHzBH0c
September 11, 2019 · 104 views

Using up the last of my Oak fence post, making a lidded container. I thought it looked like an oil filter? So I added some acorns as a distraction!, it was a good opportunity to get some skew chisel practice too! You can see more of my handmade items including industrial steampunk lamps & more here https://www.pinterest.co.uk/AMC77Handmade

 

Woodturning: Curly Hawaiian Saligna Bowl (aka Red Gum Eucalyptus)
By: David Adamsen
Video ID: y7gufFTbMlw
September 11, 2019 · 104 views

Thanks for watching and subscribing! This is my third filmed project! I have been woodturning since January 2019 and am entirely self-taught. This was a piece of reclaimed wood that otherwise would have been lost in a burn pile! I'm not sure my skills with the bowl gouge matched the ambitious shape, since I was too afraid of getting catches to use anything but the carbide hollower at several points. The natural gum in the wood made it incredibly hard to work with, and I had to resharpen several of the tools multiple times. I'm not entirely thrilled with the results of the CA glue on the stress cracks, but more experience gained and more lessons learned... Thanks again for watching! Please consider subscribing and leaving a comment and a like on this video as it will help my channel grow! All of the music in this video came from: https://www.epidemicsound.com/ If interested, check out my Etsy store: https://www.etsy.com/shop/AdamsenWoodcraft

 

Tops with Tom movie
By: Grand River Wood Turners
Video ID: _AcjyGwrxAY
September 22, 2019 · 102 views

Tom Penninga demonstrates making a string pull top.

 

review on the DRAPER Mini Wood Lathe
By: DAVE THE WALSALL WOODTURNER
Video ID: DOjAdhWSKhE
September 21, 2019 · 92 views

Review on The DRAPER Variable Speed Mini Wood Lathe

 

The Flaming Turner Live Steam #20
By: The Flaming Turner
Video ID: Q-VGkyaUJoU
September 21, 2019 · 92 views

------ Web Site - https://theflamingturner.my-free.website/ Facebook Group - https://www.facebook.com/groups/257690594764605/ Instagram - https://www.instagram.com/theflamingturner/ I also sell some of my stuff on etsy you can take a look here. https://www.etsy.com/uk/shop/TheFlamingTurner

 

WOODTURNING the spider web salade bowl
By: Villy woodturning
Video ID: _NLamndyqU8
September 25, 2019 · 91 views

#woodturning #bowl #ambrosia #maple #wood #ambrosia #turning A friend to my just passed my first command 6 bowl. Made with the wood i want and the shape i want 100 % my choice. So i decided the first one made with ambrosia maple and with te typical shape of vase and this piece of wood was super special because the node in the wood look like a spiderweb maybe i have to much imagination ... let me know in the comment what you like or don't like happy turning to all of you

 

#40 Nisthabitat aus Walnuss (10-fach beschleunigt)
By: Drexeln
Video ID: _FvG2QqzuZE
September 09, 2019 · 87 views

weitere Informationen unter: https://www.drexeln.de/bewohnbar/ NISTHABITAT 1 Holz: Walnuss (Stirnseiten gewachst) Herkunft: Bauprojekt auf dem Nachbargrundstück Ø Einflugloch: 26 mm Höhe: 43 cm Ø Höhe Einflugloch: 17,5 cm Ø maximal außen: 25 cm Ø innen oben: 10 x 10 cm tief Ø innen unten: 11 x 10 cm tief Gesamthöhe innen: 20 cm Wandstärke inkl. Rinde: 16 - 60 mm (die dünnere Seite geht nach hinten) Gewicht: 5,5 kg inkl. Gurtbefestigung Befestigung am Baum mit spannbarem Autogurt (recycled) Hand-gedrechselt aus Frischholz Mitte 2019, somit dürfte sich während der weiteren Trocknung das Gewicht noch reduzieren. Ob die Rinde langfristig so erhalten bleibt wird sich zeigen ...

 

WOODTURNING (LIDDED BOX)
By: Villy woodturning
Video ID: zSAkRa8twoQ
September 22, 2019 · 87 views

this is my first attempt to make a rounded lidded box without a jig . not bad for a first time tell me in the comment #woodturning #wood #diy #craft #workshop #maple

 

WOODTURNING MY ART
By: Villy woodturning
Video ID: OUfGlvX-YGQ
September 05, 2019 · 86 views

this is some of my woodturning project i made the past 4 month if you have some comments go ahead thanks for watching

 

Live Turning w/The Flaming Turner
By: The Flaming Turner
Video ID: bZOAmWa-NLc
September 14, 2019 · 85 views

------ Web Site - https://theflamingturner.my-free.website/ Facebook Group - https://www.facebook.com/groups/257690594764605/ Instagram - https://www.instagram.com/theflamingturner/ I also sell some of my stuff on etsy you can take a look here. https://www.etsy.com/uk/shop/TheFlamingTurner

 

WOODTURNING (double rescued firewood)
By: Villy woodturning
Video ID: 29ZGepJOpE8
September 25, 2019 · 82 views

#woodturning #lathe #platters #workshop #firewood #wood WHAT A PIECE OF WOOD... first i take it from the aunt of my girlfriend and when i turned i goes little to far in it so i decided to rescued a second time haha i left you check this out have a great video MAKE SUR YOU HIT THE LIKE BUTTON AND SUBSCRIBE product i use : wood : pine and maple tool : king industrial lathe 12x18 bowl gouge 1/2 ,parting tool ... yorkshire grit abrasive paste (this is the best) thung oil. thanks a lot for watching

 

WOODTURNING THE PEN GUN (maple burl)
By: Villy woodturning
Video ID: M9kf71ufrzQ
September 23, 2019 · 80 views

#woodturning #penturning #pen #gun #mapleburl #tourabois #burl #maple #lathe not my first pen but this one im pretty proud of it it made with a maple burl and finished with CA glue POW POW

 

woodturning a natural edge pear end grain bowl
By: Dr Ali's Woodturning
Video ID: ASSbvjp6vQs
September 05, 2019 · 77 views

This one is a little rough. I'm still learning. There's a bit of glare from the bowl for a fair amount of the video I turned this from a piece of a pear tree my friend and I cut down a few months ago. It was turned fairly wet but luckily it hasn't cracked too much in the last couple of months It's finished with shellac and garnet shellac/tung oil friction polish

 

Part 2 of 2 - Larry Cronkite - Pen Turning and Assembly
By: West Georgia Woodturners
Video ID: eu1SpW7TmX8
September 14, 2019 · 76 views

Larry Cronkite demonstrates his pen making process. He demonstrates preparing the blanks, turning on lathe, finishing and assembly.

 

NWWC - Spheres - by Hayden Bourke - 3 of 3
By: Northland Woodturners and Woodworkers Club
Video ID: gS1gFmE8_Js
September 18, 2019 · 74 views

Club night event featuring turning a sphere by Hayden Bourke using a jig made by him. This is the third of a three part video series.

 

Maple Crotch Bowl - Woodturning
By: Second life of wood-turning
Video ID: p3zqkpcrNyY
September 24, 2019 · 74 views

It was my first project with that kind of log on face plate The lathe was very stabil A lot of sanding but turning was very quick. I could never get out from my work place

 

Woodturning with Woodpops Carving the Paua Lizard
By: Roger Dale Scott
Video ID: XPUZTTOecSw
September 29, 2019 · 74 views

Woodturning with Woodpops Carving the Paua Lizard is explained in this video. My first video in this four part series is Woodturning the Maori Paua Lizard Bowl https://youtu.be/BQSI4ch5CHI. This video deals with carving the lizard design in prep for crushed stone inlay. Two more videos deal with the crushed stone inlay of the lizard and bowl rim, respectively. Help me make more videos like this by supporting my channel. Donations are appreciated https://www.paypal.me/woodpops Purchase the bowl made in this video at this link https://woodpops.com/product/the-maor... See all of my tools and

 

Rustic bowl to Trypophobic bowl - Woodturning
By: Second life of wood-turning
Video ID: zfpTXF2u8yU
September 03, 2019 · 73 views

I bought this rustic bowl with hope that I can made something special. I was thinking there is only few bug holes. When I start turning i saw all nest. I decide to leave that holes - to much work with pouring resin to every hole. That's why I call it trypophobic bowl.

 

The Flaming Turner Live Steam #21
By: The Flaming Turner
Video ID: FGx60gs4wWs
September 28, 2019 · 73 views

------ Web Site - https://theflamingturner.my-free.website/ Facebook Group - https://www.facebook.com/groups/257690594764605/ Instagram - https://www.instagram.com/theflamingturner/ I also sell some of my stuff on etsy you can take a look here. https://www.etsy.com/uk/shop/TheFlamingTurner

 

Wood-turning a fireman's bowl
By: woodworking 220-7
Video ID: QsBFmENyRu4
September 28, 2019 · 69 views

I had a key chain that had broke ..but had this cool little fireman emblem and i wanted to use it in a project. so I had this old crotch laying around, so I put them together to create the 'fireman's bowl' OB shine juice https://www.youtube.com/watch?v taJbBmcaAZQ Music from https://www.bensound.com/royalty-free-music

 

Segmented Christmas Ornament with Keith Buxton
By: Show Me Woodturners
Video ID: f2vvbR1R2QI
September 17, 2019 · 65 views

Keith shows how he makes a six sided Christmas ornament.

 

Turning wet wood
By: Roper Woodturning
Video ID: hs6kIibOXcw
September 21, 2019 · 62 views

Check out this crazy awesome slow mo video my buddy Jeff shoot at the college. I just love the way the ribbons roll off of wet Alanthis. If this video doesn’t make you want to go out in your shop and turn wood then nothing will. , just kidding. Have a great weekend y’all. And be safe out there. #roperwoodturning #vicmarc #robertsorbytools #wood #wet #shavings #redrockscommunitycollege #slowmotion #videooftheday #colorado #makinitrain #woodturning #lathe #maker #art #artistatwork #artist

 

Harbor freight dust collection cyclone %94 percent collection for 250
By: T L
Video ID: KSSzVc63JWo
September 15, 2019 · 62 views

I dont like talking in videos. If you like this, I will make more and show some of my other marginally effective innovations.

 

I HAVE A POWERMATIC 2020
By: MARK Baid
Video ID: HdQ3Fsen9XM
September 25, 2019 · 60 views

I am super excited I just got a new Powermatic 2020 lathe follow me along as I put it together. Kinda

 

Mallet on two lathes - Woodturning
By: Second life of wood-turning
Video ID: Jye_igqGLsI
September 19, 2019 · 59 views

This project I made on two lathes becouse I would like to join two stages in my woodturning adventure. It was big step in my life and I decide to create something which will remind me about my first lathe. I have used an apple wood and resin with metallic copper dye.

 

woodturning the same wood different bowl
By: Fox the wood turner
Video ID: UA2UyTomPdI
September 17, 2019 · 57 views

this was a fun turning and I cant believe how different it looks from the last bowl what one do u think is better comment below

 

Pentagon shaped bowl - inspired by Gord Rock - Woodturning
By: Second life of wood-turning
Video ID: qgK4EP-Zq5U
September 09, 2019 · 54 views

Inspired by Gord Rock I decide to make pentagon bowl. I have made a few mistakes. Necessary I made a second pentagon piece for bottom. It was shaking all the time and I could not to turn straight. I think that is problem with lathe - it is too elastic. My bowl is 'little'smaller but I'm happy that I could made that project. Next time I will be knew what to look for to be better woodturner.

 

Абрикосовая чаша. Часть 2. Apricot bowl. Part 2.
By: Old dovecote
Video ID: nyZrujVV_88
September 07, 2019 · 52 views

 

Powermatic is running!!!!
By: MARK Baid
Video ID: bon1jrtjg-M
September 26, 2019 · 52 views

 

#40 Nisthabitat aus Walnuss (30-fach beschleunigt)
By: Drexeln
Video ID: ICHb_27Ax-4
September 09, 2019 · 51 views

weitere Informationen unter: https://www.drexeln.de/bewohnbar/ NISTHABITAT 1 Holz: Walnuss (Stirnseiten gewachst) Herkunft: Bauprojekt auf dem Nachbargrundstück Ø Einflugloch: 26 mm Höhe: 43 cm Ø Höhe Einflugloch: 17,5 cm Ø maximal außen: 25 cm Ø innen oben: 10 x 10 cm tief Ø innen unten: 11 x 10 cm tief Gesamthöhe innen: 20 cm Wandstärke inkl. Rinde: 16 - 60 mm (die dünnere Seite geht nach hinten) Gewicht: 5,5 kg inkl. Gurtbefestigung Befestigung am Baum mit spannbarem Autogurt (recycled) Hand-gedrechselt aus Frischholz Mitte 2019, somit dürfte sich während der weiteren Trocknung das Gewicht noch reduzieren. Ob die Rinde langfristig so erhalten bleibt wird sich zeigen ...

 

Random Live Turning
By: The Flaming Turner
Video ID: Jbw2e3esGRg
September 07, 2019 · 51 views

------ Web Site - https://theflamingturner.my-free.website/ Facebook Group - https://www.facebook.com/groups/257690594764605/ Instagram - https://www.instagram.com/theflamingturner/ I also sell some of my stuff on etsy you can take a look here. https://www.etsy.com/uk/shop/TheFlamingTurner

 

Bent hook tool
By: Scary Catches
Video ID: A9aLA-EReic
September 06, 2019 · 51 views

Its a bit different from Martel and Wiedemann bent hook tool.(Wiedemann to the right) Mine is straight in the front. I think this can work well for deeper hollowing :) It is made from a spade wood drill bit. Next time i will try to make one out of A8 Mod steel.

 

My First Large Epoxy Casting Box! Turned from Scraps and Epoxy Resin!
By: Rockin’ R’s Woodshop
Video ID: Bkk9dcU04Fg
September 08, 2019 · 51 views

It took me several weeks to cast it all together, I took the remnants of epoxy I was either experimenting with or using to coat other items. A search through the scrap bin and several times of pour and wait, then it was time to throw it on the lathe and see what came out! As always, please feel free to let me know in the comments what I can do better; with either the turning or the videos. And please like, share and subscribe! Links: Jason and Son Custom Carpentry, Inc. (tell them you heard about them from me, they do great work and it will really help me out) https://www.facebook.com/Jaso

 

Unboxing new lathe Holzmann D460FXL
By: Second life of wood-turning
Video ID: 1zKQBDB3_Wo
September 19, 2019 · 51 views

I have get new lathe from my wife on my birthday I'm really proud of this lathe. It is quiet and more stable than my old lathe. Cuts are straight. The best thing in that kind of lathes is regulation speed of spindle. Now turning will be more comfortable and easier. I'm waiting for jaws chuck becouse propably seller forgot send it to me

 

Woodturning an oak platter
By: Dr Ali's Woodturning
Video ID: PyI1VFKNa0w
September 26, 2019 · 49 views

In this video, I make an oak platter for my friend's dad. I added audio commentary after I was asked to and I felt quite uncomfortable speaking to the camera OOOH and I made stickers. If anyone in the UK wants some then let me know. I can't really afford to send them abroad much at the moment

 

Beautiful Surprise Box Elder Bowl
By: Jamie Ferrell Woodturning
Video ID: 0wvDYzXlpmU
September 23, 2019 · 48 views

 

#24 Finish turning a choke cherry bowl
By: Mike T
Video ID: hmxyjZYFrXg
September 11, 2019 · 47 views

Trying out my new scraper and finish turning a 11x5in choke cherry bowl with a maple rim. Finished with General finish's wood bowl finish Check out my new Etsy: https://www.etsy.com/shop/MiJean123 Facebook: https://www.facebook.com/Trainersturning/ Music by Bensound

 

Powermatic part 2
By: MARK Baid
Video ID: Kgrb1dGQTWU
September 26, 2019 · 46 views

 

New lathe project #1 Christmas tree decoration
By: Cj woodturning
Video ID: yAr5gQcuVfY
September 11, 2019 · 45 views

New lathe project #1 my new lathe is a nova 3000 and old one was a myford ml8 link for this finish https://amzn.to/2QmYT0U

 

Wood Turning out a small dice tower! And camera problems...
By: Rockin’ R’s Woodshop
Video ID: yWtdo3Kd-0U
September 20, 2019 · 44 views

I started out on this one planning for something a little bigger and with more effects built in, but this is what I was able to get to in the end. Pohl Barn's channel: https://www.youtube.com/channel/UC1-1pXVIRcKm-DUc-Ak2XyA If you feel the need to send me something: Rockin' R's Woodshop PO Box 101 Mountain City, TN 37683 USA Links: Jason and Son Custom Carpentry, Inc. (tell them you heard about them from me, they do great work and it will really help me out) https://www.facebook.com/Jason-and-So... Ack's Abrasive Paste (not a sponsor, just great stuff): https://ackswoodpaste.com/ Facebook page: https://www.facebook.com/RockinRsWood... Merchandise with the Rockin' R's Logo is available at redbubble.com ! https://www.redbubble.com/people/iceb... If you would like to support me in other ways, please check out both: Etsy: https://www.etsy.com/shop/mountainman... Patreon: https://www.patreon.com/Rockinrswoodshop

 

#40 Nisthabitat aus Walnuss (3-fach beschleunigt)
By: Drexeln
Video ID: cdrQWPwiUtQ
September 09, 2019 · 43 views

weitere Informationen unter: https://www.drexeln.de/bewohnbar/ NISTHABITAT 1 Holz: Walnuss (Stirnseiten gewachst) Herkunft: Bauprojekt auf dem Nachbargrundstück Ø Einflugloch: 26 mm Höhe: 43 cm Ø Höhe Einflugloch: 17,5 cm Ø maximal außen: 25 cm Ø innen oben: 10 x 10 cm tief Ø innen unten: 11 x 10 cm tief Gesamthöhe innen: 20 cm Wandstärke inkl. Rinde: 16 - 60 mm (die dünnere Seite geht nach hinten) Gewicht: 5,5 kg inkl. Gurtbefestigung Befestigung am Baum mit spannbarem Autogurt (recycled) Hand-gedrechselt aus Frischholz Mitte 2019, somit dürfte sich während der weiteren Trocknung das Gewicht noch reduzieren. Ob die Rinde langfristig so erhalten bleibt wird sich zeigen ...

 

Hook tool
By: Scary Catches
Video ID: _N3TbdbV74c
September 21, 2019 · 43 views

Very small test. The steel is A8mod.Its about 60HRC,and it will bend before break,and can handle heat untill 500 celsius before the hardening goes out. The wood is dry Beech.

 

Curly Maple Green Laser Pointer Woodturning 238
By: Roweville Retro
Video ID: 3FNocM8zFrM
September 14, 2019 · 42 views

This week, I turn a bit of spalted curly maple into a laser pointer. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Jade Pen (Leona's Blank)
By: The Flaming Turner
Video ID: 3HKWLxjJeYI
September 20, 2019 · 42 views

Howdy peeps today ill be doing a pen with a blank that leona sent me so i hope you all like the way its turned out. Big shout out to these below so go check them out. Leona Fay Youtube - https://www.youtube.com/channel/UCHXsm8otBJGKUzsVGGE2vVw Instagram - https://www.instagram.com/leonafaywoodturning/ Deadrise Wood Crafts https://www.youtube.com/channel/UC0mj-XCJe_Vjve150D7HCrA ------ Web Site - https://theflamingturner.my-free.website/ Facebook Group - https://www.facebook.com/groups/257690594764605/ Instagram - https://www.instagram.com/theflamingturner/ I also sell some of my stuff on etsy you can take a look here. https://www.etsy.com/uk/shop/TheFlamingTurner

 

NWWC - Spheres - by Hayden Bourke - 2 of 3
By: Northland Woodturners and Woodworkers Club
Video ID: HahzKFRNkJg
September 18, 2019 · 42 views

Club night event featuring turning a sphere by Hayden Bourke using a jig made by him. This is the second of a three part video series.

 

Gatsby pen
By: David Hotchkiss
Video ID: 1qS6CHpMrD8
September 20, 2019 · 42 views

Completed with a ceiling fan blade, and red color.

 

Walnut bowl on a axminster lathe UK
By: The Riggs workshop
Video ID: yzTKirD_S-E
September 11, 2019 · 40 views

This is a bowl turned on my axminster wood lathe

 

Turning a Small Memorial Urn
By: BitterRoot Workshop
Video ID: OvMfy42YS3I
September 14, 2019 · 39 views

Maple or Box Elder burl Roughly 4 1/2 in. tall assembled. Note to self - don't turn on sensor stabilization when I want to do time lapses...or probably ever.

 

NWWC - Spheres - by Hayden Bourke - 1 of 3
By: Northland Woodturners and Woodworkers Club
Video ID: 1OMvLjMZN5o
September 18, 2019 · 38 views

Club night event featuring turning a sphere by Hayden Bourke using a jig made by him. This is the first of a three part video series.

 

Cocobolo Pen OctoCut
By: BitterRoot Workshop
Video ID: qi9Io8Np_wI
September 05, 2019 · 37 views

So, this is sort of an attempt to capture both my improvements in efficiency...and show how much extra work I gave to myself with some odd shapes to sand on the otherwise simple slimline kits.

 

WOODTURNING ; Ambrosia maple vase
By: Villy woodturning
Video ID: wLTUlpnfI20
September 28, 2019 · 36 views

#woodturning #ambrosia #maple #wood #diy #craft today i decided to make a little vase for the tiny plant of my girlfriend instagram ; https://www.instagram.com/villy__vinny_

 

Mounting Wood on a Lathe - Wood Blanks for Small Opening Hollow Forms
By: Jason Van Duyn
Video ID: gtpcagyrtPk
September 16, 2019 · 35 views

Van Duyn Woodwork, Raleigh NC - This video shows the process I use for mounting irregular shaped wood blanks for turning hollow vessels. This method addresses the issues in mounting wood on a lathe for small opening natural edge hollow forms.

 

Woodturning - Triangular Box (Off Center) Sphere As A Lid
By: Kotodama
Video ID: cRzvqU0nBtE
September 08, 2019 · 34 views

In the last few days I had some time and turned this triangular box/vase with a sphere on top as my first off center project. This wasn't my own idea, as I've seen it in a video of 'Holzwerken' some months ago. Here is the link to the video, if someone wants more detailed information in how to mark both sides of the wood: https://www.youtube.com/watch?v CPuvxJ1hEdM&t

 

Turned Spalted Punky Elm Eiffel Tower Lamp Woodturning by AMC77
By: AMC77 Handmade
Video ID: 5V8cN18VC_U
September 24, 2019 · 34 views

In this video I turn a block of spalted Elm into an Eiffel Tower inspired desk lamp. I'm pleased with the overall design, but not so happy with the finish. I think the spalting had gone too far as the wood was very punky and crumbling to dust! I did try to stabilise it with CA glue off camera but this had little to no effect!? You can see more of my handmade items here https://www.pinterest.co.uk/AMC77Handmade

 

Sycamore Fire Starter Woodturning 239
By: Roweville Retro
Video ID: L2ElyZzg1iY
September 21, 2019 · 33 views

This week, I make a fire starter from a piece of sycamore. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

My Journey Into Wood Turning #23 - Woodcraft WoodRiver Armor Marker Pen
By: mrbodawg
Video ID: xglXOL6JW_Q
September 20, 2019 · 33 views

My Journey Into Woodturning #23 - Woodcraft WoodRiver Marker Pen I go over two problems in the instructions and make the pen. Wood turning a felt tip marker pen. Videos I make are for entertainment and not instruction. Videos are how I do things / create. My safety is “my” responsibility and “your” safety is “your” responsibility. Before beginning any project, be familiar with your equipment. Read the owners manuals and make sure you understand what you are doing. Always wear the the proper personal protective equipment. Have Fun!

 

Walnut Hardwood Bowl with Blue Resin Strip
By: Jamie Ferrell Woodturning
Video ID: f6dWsQ5hnc4
September 22, 2019 · 32 views

 

Big time lathe fail.
By: Rabbit Town Wood Arts
Video ID: 7t0D8w3kAXA
September 12, 2019 · 31 views

Turning a white ash burl about 10inches in diameter. An the result of this video happens. Ugh!!!!!

 

Wood turning a Purple Heart and Purple Resin Bowl
By: Scenic City Woodturning
Video ID: L1ObBorfxKg
September 09, 2019 · 29 views

Here I turned a bowl made of Purple Heart wood and purple resin. It was supposed to be an anniversary gift for my wife, but due to an injury it was a little late. I welcome any and all feedback. Thanks for watching! Disclaimer I am not a professional woodworker or woodturner and working with machinery can be dangerous. My videos are for entertainment purposes only and you should not rely on my methods. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you. Your safety is your own responsibility not mine Be safe, creative and have fun!

 

Finishing a Lychee Bowl
By: KEA Woodturning Studio Hawaii
Video ID: jaK7H2fN8D8
September 18, 2019 · 29 views

Using a Doug Thompson Negative Rake Scraper to finish a Lychee bowl

 

Wiedemann hook tool
By: Scary Catches
Video ID: T7yxp4aY_VM
September 05, 2019 · 28 views

Still need some regrinding/sharpening before i get a big smile of this hook.

 

My Journey Into Wood Turning #20 - Teachers Pen # 2
By: mrbodawg
Video ID: sPwtcbZWVyA
September 04, 2019 · 28 views

My Journey Into Wood Turning #20 - Teachers Pen # 2 Nice pen for a teacher that works with my Daughter-in-Law. Great blank that turned extremely well. Wall Street II Pen from Woodcraft. Videos I make are for entertainment and not instruction. Videos are how I do things / create. My safety is “my” responsibility and “your” safety is “your” responsibility. Before beginning any project, be familiar with your equipment. Read the owners manuals and make sure you understand what you are doing. Always wear the the proper personal protective equipment. Have Fun!

 

Woodturning. Teak and resin 9-11 tribute platter
By: Rabbit Town Wood Arts
Video ID: 6cwLSjfJ4Vs
September 10, 2019 · 28 views

Small platter about 8 Inches in diameter about inch and a half tall. Went way too thin on the bottom made a bunch of mistakes. I learned a lot from the doing this platter and at some point I’ll try it again. Hopefully I can do better

 

Damiano Ferrero Christmas Ornement
By: West Island Woodturners
Video ID: zfGKeRnGbF8
September 19, 2019 · 28 views

Damiano shows us how to make a cute Christmas ornement

 

Wine Bottle Stopper from Root (Special Gift for Blue Ridge Estate and Winery)
By: Peaceful Woodturner
Video ID: 0TzOTKfcumA
September 21, 2019 · 27 views

This is a bottle stopper made from the root of a weeping cherry tree. Check out the sculpture I made from the same wood: https://youtu.be/SBWUkdP-nZE All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey! Facebook: https://www.facebook.com/PeacefulWoodturner/ Twitter: @WoodturnerPeace

 

Hands On Retreat 2019
By: Grand River Wood Turners
Video ID: fE_C8Bk9D_o
September 25, 2019 · 27 views

Ron Campbell's 'Hands On Retreat'. Filmed at his ranch on June 15, 2019.

 

Copper Knight Armor pen
By: David Hotchkiss
Video ID: ASML4MJsEXI
September 06, 2019 · 27 views

Completed with alumilite and egg shells.

 

KCWT September 2019 Challenge and ShowNTell
By: KCWoodturners1
Video ID: UFxafPkoD74
September 10, 2019 · 25 views

Kansas City Woodturners Association regular monthly meeting September 2019 Challenge and Show-N-Tell. The Woodturning Challenge was use a new finish, then explain how and why you did it. Meeting at the KC Woodturners clubhouse on 9-9-2019.

 

Woodturning carbide chisels on a budget using basic tools by AMC77
By: AMC77 Handmade
Video ID: Sw9aWigLtEU
September 28, 2019 · 25 views

Today I make myself a couple of carbide turning chisels for cheap! I picked up two old Robert Sorby chisel handles nice n cheap!, one drilled to 3/8' and the other 1/2'. I bought two 8' steel rods from eBay to suit the holes in the handles. The carbide cutters also came from eBay. Conveniently the correct fitting screws were included. Both chisels cost me under 20.00! All with just basic tools! I hope this inspires others to make their own, as its really that not hard You can see more of my handmade items including steampunk industrial style lamps here https://www.pinterest.co.uk/AMC77Handmade

 

Spalted Maple tray
By: T L
Video ID: z4ULYdBuL04
September 06, 2019 · 24 views

A Nice Amish man gave me several nice blocks of firewood to turn. Right before I left, he raced up and told me that he had some really pretty maple beams. 10 to 12 foot by 10 X 3 inch spalted maple. I asked him to hold a couple until I headed home. This morning I stopped by on the way out and he kept loading all five beams onto my roof rack far exceeding the weight limit and common sense limit but you take all that you can get when its 1/board foot... The next few videos should be fun as I get to the really pronounced zone lines and figure. Thank you, Robert, for the beautiful dead rotten maple carcass.

 

making a Frankenstein vase
By: Wilf's Wood
Video ID: GTCD7tBk1w4
September 11, 2019 · 23 views

making a small vase out of iroko with a small crack that I carved then added staples to.

 

New lathe project #2 Oak spinning top
By: Cj woodturning
Video ID: 4NDIk3C3KV0
September 25, 2019 · 23 views

New lathe project #2 my new lathe is a nova 3000 and old one was a myford ml8 link for this finish

 

My Journey Into Woodturning #24 - Lollypop Pen
By: mrbodawg
Video ID: -fK69HUhIfI
September 24, 2019 · 23 views

My Journey Into Woodturning #24 - Lollypop Pen Woodcraft II click pen. Welcome to MrBodawg. And please Join me! Join me on my journey of learning and sharing. Join me, as I share with you what I do, how I do it, why I do it and new learning experiences like my new wood lathe series. Please Subscribe to my channel: https://www.youtube.com/user/mrbodawg?sub_confirmation 1 Instagram : https://www.instagram.com/thebodawg/ Twitter: https://twitter.com/Bodawgcom Videos I make are for entertainment and not instruction. Videos are how I do things / create. My safety is “my” responsibility and “your” safety is “your” responsibility. Before beginning any project, be familiar with your equipment. Read the owners manuals and make sure you understand what you are doing. Always wear the the proper personal protective equipment. Have Fun!

 

Cheap wooden pen turning, again.
By: TheTinyWorkshop
Video ID: Typq_i4YlQ0
September 17, 2019 · 21 views

Another cheap wooden pen. These types of projects are a good exercise for me. Especially the skew chisel is still difficult. Grinding the chisel is also a difficult job. I like to make something useful during the practice. Therefore a new pen again.

 

Eastern red Cedar pen
By: Rabbit Town Wood Arts
Video ID: WXmSeB1emq4
September 02, 2019 · 20 views

Showing my nieces boyfriend how to turn a pen. Thank you for watching thank you for your continued support. Please comment and like this video let me know what you think. Thank you to my subscribers and please if you haven’t subscribe please subscribe Disclaimer All my videos are for entertainment purposes only. The things I do on my videos are things at work for me. This is no means as an instructional video. When working with power tools always be safe and wear the proper protection equipment. And keep all 10 fingers and toes in arms and legs. In other words don’t get hurt stay safe.

 

Small colored box.
By: Scary Catches
Video ID: u9kWMdFDLdY
September 09, 2019 · 20 views

The wood is Beech,about 10cm high

 

making a small pencil pot \ vase
By: Wilf's Wood
Video ID: LF_jFcpbsRY
September 10, 2019 · 20 views

making a small pot to put random stuff in. I used a piece of iroco for the pot

 

NWWC - Turning a winged bowl (experienced turners) - by Bob Langford
By: Northland Woodturners and Woodworkers Club
Video ID: P2KkLbHa4-g
September 08, 2019 · 20 views

Turning a winged bowl - for the experienced turners

 

Cindy Drozda Remote Demo - Cheam Woodturners 20 November 2019
By: Cheam Woodturners
Video ID: G2rzetYO4-U
September 23, 2019 · 20 views

Introductory video from Cindy Drozda ahead of her demo to Cheam on November 20th 2019.

 

Wood turning a Yellorange resin and wood Vase
By: Scenic City Woodturning
Video ID: TDsolIWcjkQ
September 16, 2019 · 19 views

I turned this vase out of some resin and mystery wood I found. It looks similar to some I turned before that a viewer suggested may be sweet gum, but either way I think it is a pretty piece of wood. Thanks for watching, and I hope you enjoy it. Disclaimer I am not a professional woodworker or woodturner and working with machinery can be dangerous. My videos are for entertainment purposes only and you should not rely on my methods. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you. Your safety is your own responsibility not mine Be safe, creative and have fun!

 

claybowl2
By: Redeye Dave
Video ID: DTHTafNob-U
September 21, 2019 · 19 views

polymer clay inserts on bowl part 2 with edits and bad lighting, possibly terrible sound and a complete disregard to wood treatment.

 

My Journey Into Wood Turning #22 - Blue Ice Pen
By: mrbodawg
Video ID: B6vuG-jXaZo
September 10, 2019 · 18 views

My Journey Into Wood Turning #22 - Blue Ice Pen Nice blank, deep blue with light wisps of pearl reminding me of deep blue ice. Woodcraft Wall Street click pen. Videos I make are for entertainment and not instruction. Videos are how I do things / create. My safety is “my” responsibility and “your” safety is “your” responsibility. Before beginning any project, be familiar with your equipment. Read the owners manuals and make sure you understand what you are doing. Always wear the the proper personal protective equipment. Have Fun!

 

New toys
By: Roper Woodturning
Video ID: RoI6SU1y1z8
September 28, 2019 · 18 views

While at the AAW Symposium this year I ran into my buddy Lionel Bedard. I have know Lionel for a few years now and am always interested in the cool new woodturning tools and parts that he comes up with. Well this year he had with him these really cool large drive spur plates. Of course I had to buy one and give it a shot. Well here it is in action driving a pretty big piece of NIP with no issues or problems. Great design here Lionel good luck with these and I’m sure you will sell as many as you can make. #roperwoodturning #lathe #maker #woodturnersofinstagram #woodartist #woodturning #wood #drivespur #videooftheday #woodturner #woodworking #finewoodworking

 

Cutting Wood Threads
By: Chris Thomas
Video ID: Fu0JCT_G5bA
September 18, 2019 · 17 views

In this video I show my new process for cutting threads into wood so that I can make items like lids that can be screwed onto containers like pots or in this example an urn. I got this jig from a nice fellow in England that facilitates the entire process. I haven't been able to do much in the past few weeks because I cut myself pretty badly on my right thumb as I was trying to cut threads manually with a 'Dremel' like device. But since I have healed I have done this and a few other things that I will try to put up as soon as possible. Thanks for watching! Please subscribe, if you haven't al

 

Woodturning. Inside out ornament
By: Rabbit Town Wood Arts
Video ID: 2E1pwNvE-po
September 08, 2019 · 16 views

Turning them inside out Christmas tree ornament out of Poplar with Walnut finials. Check out Kim tippins channel https://www.youtube.com/channel/UChOkCqsbNr6K1RYi9Sadb5Q

 

Woodturning a Blue Oak Burl Bark Bowl- Say that 5 times fast!
By: Scenic City Woodturning
Video ID: oEHzqcq70FQ
September 23, 2019 · 16 views

This is a bowl I made from the bark of an Oak burl and blue tinted resin. It had it's challenges with getting a glossy finish, but I think it turned out nice. So far I believe this is my favorite project to date. Thanks for watching!! Disclaimer I am not a professional woodworker or woodturner and working with machinery can be dangerous. My videos are for entertainment purposes only and you should not rely on my methods. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you. Your safety is your own responsibility not mine Be safe, creative and have fun!

 

Telephone pole turned into a bowl
By: T L
Video ID: 5qOIDxVZWxU
September 18, 2019 · 16 views

This cedar bowl has over 100 rings exposed. I was hoping to see more cedar red coloring when I cut it in half but I'm still very happy with the results. Kreis lumber in Marysville, Ohio gave me this wood to turn. Nice people with a great selection. I don't do sponsorship but don't mind linking to a website when someone gives me stuff http://kreissawmill.com/ I also always use breathing protection when turning cedar!

 

1.00 per board ft spalted maple bowl
By: T L
Video ID: QMn0yl3IhhA
September 28, 2019 · 15 views

Not perfect but it was good to flesh out the new shop configuration.

 

Walnut Witch
By: T L
Video ID: 3DqjhPt_2FQ
September 02, 2019 · 14 views

Thought I would make these for my first craft show. Quick, fun and unique (I think) Happy Halloween

 

Maple burl bowl
By: Rabbit Town Wood Arts
Video ID: iiioY4GVNEA
September 01, 2019 · 14 views

This is a maple burl bowl that might not make it. So please comment on what you think I should do. Should I fill it with resin? What color should I make the resin? Please let me know. Check out Doug’s channel The Pohl Barn Productions I can’t figure out how to put the link on here. Ugh more learning for me.

 

Testing the Robo Rest
By: KEA Woodturning Studio Hawaii
Video ID: ndxYAxQLngo
September 19, 2019 · 14 views

I got a set of 3 Robo rests. I love them. check www.robohippy.net to get yours.

 

Robo Rest
By: KEA Woodturning Studio Hawaii
Video ID: aAAcqhI9Ino
September 18, 2019 · 14 views

Thank you Robo Hippy for making these great tool rests! I'll be testing them soon!

 

My Journey Into Wood Turning #21 - Razor Handle
By: mrbodawg
Video ID: KXFLebKQYQI
September 06, 2019 · 13 views

My Journey Into Wood Turning #21 - Razor Handle Handle is for Mach3 razor blades. Handle kit and blank were both bought from Rockler. Very easy blank to turn. Very pleased with the outcome. Videos I make are for entertainment and not instruction. Videos are how I do things / create. My safety is “my” responsibility and “your” safety is “your” responsibility. Before beginning any project, be familiar with your equipment. Read the owners manuals and make sure you understand what you are doing. Always wear the the proper personal protective equipment. Have Fun!

 

The Ginger Turner.5: bud vase
By: The Ginger Turner
Video ID: yPLp97S-cgg
September 04, 2019 · 13 views

Bud vase with plastic insert to hold the water, finished with electric purple embellishing wax. https://www.hampshiresheen.com music from bensound - inspire

 

How to install a Wolverine Sharpening System and a Rikon Grinder
By: mrbodawg
Video ID: muMdsZrZF68
September 13, 2019 · 13 views

How to install a Wolverine Sharpening System and a Rikon Grinder. Three (3) steps to install the Wolverine Sharpening System with a Rikon 80-805 Videos I make are for entertainment and not instruction. Videos are how I do things / create. My safety is “my” responsibility and “your” safety is “your” responsibility. Before beginning any project, be familiar with your equipment. Read the owners manuals and make sure you understand what you are doing. Always wear the the proper personal protective equipment. Have Fun!

 

NWWC - Turning a bowl and two outer rings - by Shane Hewitt
By: Northland Woodturners and Woodworkers Club
Video ID: BohgE-hSzfg
September 08, 2019 · 13 views

Shane Hewitt demonstrates how to cut two outer rings prior to turning a bowl, maintaining a good design of the bowl and making the most out of the blank wood

 

making a candle holder out of bankisia pod
By: Wilf's Wood
Video ID: W2yPf46isjY
September 19, 2019 · 13 views

 

making a ball shaped thing with a gallium inlay
By: Wilf's Wood
Video ID: XG-XIn1tsro
September 16, 2019 · 13 views

turning a pice of yew burl into a small ball \ paper wait

 

Gold and Red Hybrid pen turning
By: AD Woodworks
Video ID: zvX80EeKRuY
September 15, 2019 · 13 views

Gold and Red Hybrid pen turning

 

How to Spin a Whipping Top / Whip & Peerie
By: Love HeartWood • Sustainable Wooden Gifts
Video ID: VI2EIfW1VYM
September 24, 2019 · 12 views

Spinning a Whipping Top takes a little practice but it’s a fun toy to master. If you are right-handed point the base of the top to the left. If you are left-handed point the base of the top to the right. Then wind the cord away from you fairly tightly so that the first coil goes over the knot in the end. This locks the cord into the groove. Next place the top on the ground with a finger or thumb in the centre. Lastly, pull the stick quickly but smoothly sideways, not back towards your body. If you find your top slipping rough up the metal cap with a bit of sandpaper. Happy spinning! Liz https://www.loveheartwood.co.uk/wp/shop

 

Roman canteen
By: Redeye Dave
Video ID: 6Ca8UhV6Kt0
September 04, 2019 · 10 views

Roman canteen made from oak and possibly cherry though cant be sure. This took me over a week to complete as just couldnt stand for too long at the lathe and concentrate, the symtoms of either fibromyalgia or i really couldnt be done with it..Till the end when the danish oil was rubbed on the main body, I really wasn't sure how it was going to come out. But I like the end result.. well i say the end it needs a leather strap to make it functional, or as near to functional as I'm going to make it...Hope you enjoy the ride, this is only for entertainment and by No means should you follow any of this as a tutorial... I'm a wood butcher at best....

 

Dan Henry Ornamental Lathe
By: Hunt County Woodturners
Video ID: HxNhUwSOQWs
September 07, 2019 · 10 views

Dan describes and demonstrates the Ornamental Lathe

 

My Journey Into Woodturning #25 - Bloodwood Shop - Artist Pencil
By: mrbodawg
Video ID: mB1iLjwWgjg
September 27, 2019 · 10 views

My Journey Into Woodturning #25 - Bloodwood Shop - Artist Pencil. Woodcraft woodworkers / artist pencil with 4B soft lead. Welcome to MrBodawg. And please Join me! Join me on my journey of learning and sharing. Join me, as I share with you what I do, how I do it, why I do it and new learning experiences like my new wood lathe series. Please Subscribe to my channel: https://www.youtube.com/user/mrbodawg?sub_confirmation 1 Instagram : https://www.instagram.com/thebodawg/ Twitter: https://twitter.com/Bodawgcom Videos I make are for entertainment and not instruction. Videos are how I do things / create. My safety is “my” responsibility and “your” safety is “your” responsibility. Before beginning any project, be familiar with your equipment. Read the owners manuals and make sure you understand what you are doing. Always wear the the proper personal protective equipment. Have Fun!

 

Ambrosia Maple Bowl Turn
By: BitterRoot Workshop
Video ID: CC3l8kiQeqo
September 24, 2019 · 10 views

Getting better acquainted with the high speed steel tools. Sanded to 800, finished with boiled linseed oil, feed & wax, and renn wax. From one side, it makes for quite the jack-o-lantern!

 

NWWC - Butterfly wings - by Shane Hewitt
By: Northland Woodturners and Woodworkers Club
Video ID: shiFnS279qM
September 08, 2019 · 9 views

Shane Hewitt demonstrates how to redeem from an excessively hollowed bowl with 'butterfly wings'

 

How to Turn a Basic Bowl - Part Two
By: AP Woodturning
Video ID: PUwXNSSDU9s
September 24, 2019 · 9 views

In Part Two of this series I'm going to show you step by step how to hollow out the inside of the bowl, prep and then apply a food-safe finish to the surface. I use @walrusoil cutting board oil and woodwax to bring out the grain and then seal the surface for actual use. This was a really fun project and I hope you all enjoyed watching and maybe learned something. Let me know what you think in the comments and what you would like to see for the next video. Materials/Tools: Lathe: Laguna REVO 18 36 - https://lagunalathe.com/18-36/ Face Plate: Easy Wood Tools 2' Face plate - http://www.easywoodt

 

Halloween fun
By: T L
Video ID: o5ussXrrjnM
September 18, 2019 · 9 views

 

Inlayed Sycamore bowl
By: Redeye Dave
Video ID: -o8WrZrdaGM
September 19, 2019 · 9 views

Polymer clay inlayed sycamore bowl , An experiment with polymer clay and baking the wood blank, and allowing it to cool slowly before turning to prevent cracking. I've seen a couple of attempts at this and they all seem to neglect that the clay needs to be treated as a penblank would be and not like milliput (an air drying polymer). Well unlike the idiot that baked his in a fan assisted oven for double the time and almost double the temprature needed, I thought id take my time and not rush it, and then blame the clay for being rubbish to use. So I've split this into 2 parts the second part will be the main turning of the bowl. As it turned out to be a really nice figured blank. Thanks to 'The Beard x16' Who I ran into at Yandles with his good lady and I dont think this is one of your ideas .. Lets hope the Wood butcher can do it justice..

 

Pewter and Green Hybrid Olmsted pen Turing
By: AD Woodworks
Video ID: R0twhZ5_wSo
September 15, 2019 · 9 views

Pewter and Green Hybrid Olmsted pen Turing

 

Pecan Bottle Opener Woodturning 240
By: Roweville Retro
Video ID: v_2ImrITIww
September 29, 2019 · 9 views

This week, I turn a bottle opener from a piece of pecan. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Juggling Balls for the #TMTJugglingBalls challenge! Cast resin turned to spheres!
By: Rockin’ R’s Woodshop
Video ID: f6e6y22Co5o
September 29, 2019 · 9 views

For this months TMTournament challenge, I turn out a set of juggling balls from some resin castings. Links: Jason and Son Custom Carpentry, Inc. (tell them you heard about them from me, they do great work and it will really help me out) https://www.facebook.com/Jason-and-So... Geek Out Hobbies: https://www.youtube.com/channel/UCujJq3PXRiiiizkmcD-eACg Skill Tree: https://www.youtube.com/channel/UCsT424axBr4bMLoFqiP4l_g Borg3D: https://www.youtube.com/channel/UCLwElSDY_UdxpNRc5XsK98Q Ack's Abrasive Paste (not a sponsor, just great stuff): https://ackswoodpaste.com/ Facebook page: https://w

 

Ambrosia maple, Tiger wood, Walnut and purple heart wood
By: T L
Video ID: O0RStM1D-LM
September 03, 2019 · 8 views

Everything and the kitchen sink. These are for Anna, my exchange sister that should be visiting soon.

 

Walnut ambrosia maple shot glass (Scraps)
By: T L
Video ID: eJ8yEv6ti_0
September 02, 2019 · 8 views

Pretty basic shot glass. If you are into that sort of thing.

 

Pencil Top Wooden Spinning Top
By: Love HeartWood • Sustainable Wooden Gifts
Video ID: ZfIoh0XIJlw
September 27, 2019 · 8 views

Handmade by Love HeartWood. Spin these Pencil Tops to create crazy, twirly doodles. Each top spins in its own unique way. Take your line for a walk by lifting the pad or book of paper and gently tilting it.

 

Box in a box lid
By: Redeye Dave
Video ID: yUHtCcQbU-g
September 26, 2019 · 8 views

It's a scrap bin wood rescue, to make an oddity, a tiny box in a box lid...

 

White ash burl bowl.
By: Rabbit Town Wood Arts
Video ID: nYEY6l3L6Wk
September 26, 2019 · 8 views

This is the pice of wood that busted my banjo on the lathe. I recorded a little differently so hopefully it’s better. Thank you Rick from Rick turns for your input on my videos. DisclaimerWorking with power tools can be very dangerous. Use caution while using power tools and wear proper safety gear. My videos are for entertainment use only not for instruction.

 

Right of passage captured ring goblet
By: T L
Video ID: b7Gj8m7J1vc
September 07, 2019 · 7 views

Scrap cherry from the burn pile to this. always finish before breaking the ring :)

 

Resin inlay wacky wine glass
By: T L
Video ID: IhhaFKOxIjs
September 01, 2019 · 7 views

Lots of super glue. Four days of resin pours, pressure pot troubleshooting and I still ended up with a limp stem. I swear, this never happens any other time. Really. Ambrosia maple red wite and what was supposed to be blue wacky wine glass. Beauty is in the eye of the beholder and I be holding a limp waste of material. Should have just stuck with the stripes.

 

Boxwood Twist pen
By: Redeye Dave
Video ID: UFwUKy1rquM
September 03, 2019 · 7 views

A simple Twist pen Turned from boxwood, which is used in musical instroments and chess pieces ,etc . Its a very good wood for carving. Wooden rulers tools and a variety of other items are made from this wood. The pen kit I used was from Prokraft https://www.prokraft.co.uk/ The bonus part of the video was an experiment into inserting card into the blank and trying to get a celtic twisted knot pattern.

 

Mel's Handle 4
By: Bostin Bowls
Video ID: QzcN1EL5Mkc
September 17, 2019 · 6 views

 

Mel's Handle part 1
By: Bostin Bowls
Video ID: sMV2GquDhj0
September 17, 2019 · 6 views

 

BWB (Basic Walnut bowl)
By: T L
Video ID: IhtGHpBRdKI
September 12, 2019 · 6 views

Purdy chunk of walnut with some beautiful figure.

 

Polyclaybowl gets new knob
By: Redeye Dave
Video ID: cnRhVAwWJk0
September 22, 2019 · 6 views

The final instalment in this 3 part mini saga Cut the knob off and replace

 

Jim Rodgers, Lesson 24, Alternate tool usages
By: Jim Rodgers
Video ID: mgROCoOvwfc
September 17, 2019 · 6 views

The 'Basic' woodcutting tools can have alternate uses - see some 'misdirected tools'

 

NWWC - Turning a fruit - by Bob Langford
By: Northland Woodturners and Woodworkers Club
Video ID: fZiCtln80dQ
September 08, 2019 · 5 views

Bob Langford demonstrating how to turn an apple.

 

NWWC - Turning a goblet - by Shane Hewitt
By: Northland Woodturners and Woodworkers Club
Video ID: 115DaMfhxEU
September 08, 2019 · 5 views

Shane Hewitt demonstrates how to turn a goblet using the Skew tool

 

NWWC - Hollowing - by Shane Hewitt
By: Northland Woodturners and Woodworkers Club
Video ID: syG_18Huhsw
September 08, 2019 · 5 views

Using the hollowing tool, demonstrated by Shane Hewitt

 

Pink burl hybrid pen turning
By: BlackWolf WoodWorks
Video ID: nrjJwc0bTNs
September 18, 2019 · 5 views

Check out my gear on Kit: https://kit.com/jclevenger After casting the block I like to make one pen from the set for myself to see what the final results are. This one tuned out beautiful.

 

Resin cast geode paperweight
By: John Baker
Video ID: 0_VjR_rqg5U
September 29, 2019 · 5 views

just a quick video of how I turned this casting of a geode in to a paperweight

 

Mel's Handle 3
By: Bostin Bowls
Video ID: ZGOWmFzPXFo
September 17, 2019 · 4 views

 

More new turned pieces
By: Mark DeNinno
Video ID: XvmTYKyHSxQ
September 04, 2019 · 4 views

Wood lathe turned wood pieces

 

Mel's Handle part 2
By: Bostin Bowls
Video ID: 2xdajkUMlsg
September 17, 2019 · 3 views

 

Resin curved inlay test project from a resin pour disaster
By: T L
Video ID: w9phZak-I4g
September 01, 2019 · 3 views

Well, this was never going to end well. When poured, the two blocks merged and leaked a half-inch of resin into the bottom of my pressure pot. But I wanted to turn it anyway for practice.

 

NWWC - Making a hibiscus flower - by Peter Williams
By: Northland Woodturners and Woodworkers Club
Video ID: JYbxvx2TOn4
September 08, 2019 · 3 views

Peter Williams demonstrates how, with a combination of turning and planing, to make a hibiscus flower

 

NWWC - Turning a captive ring on dowel - by Peter Williams
By: Northland Woodturners and Woodworkers Club
Video ID: mOj_25Of__U
September 08, 2019 · 3 views

Peter Williams demonstrating how to turn a captive ring on a thin dowel

 

Wood turning- Epoxy and wood earrings
By: RCK Projects
Video ID: oxZXfm3aB5k
September 26, 2019 · 3 views

Made some earrings out of some epoxy and some wood

 

NWWC - Captive ring tool making principle - by Peter Williams
By: Northland Woodturners and Woodworkers Club
Video ID: CjnF8J2wsN4
September 08, 2019 · 2 views

Peter Williams demonstrating the tool making principles

 

Purple and pink hybrid
By: BlackWolf WoodWorks
Video ID: EoWEpECwdi0
September 13, 2019 · 2 views

Check out my gear on Kit: https://kit.com/jclevenger Casting a hybrid blank in sapphire blue and glitter. Pink mica and deep purple mica.

 

ShagbarkTL1Bowl1
By: Will Coffman
Video ID: 46LrVsnYhL0
September 14, 2019 · 1 views

Started a Shagbark Hickory Bowl...

 

Casting hybrid 49ers pen blanks
By: BlackWolf WoodWorks
Video ID: qWmZGyLWPPk
September 09, 2019 · 1 views

Check out my gear on Kit: https://kit.com/jclevenger This is the full video from live streaming my casting of the 49ers pen blanks requested by my wife!

 

Great Bargains
(ends October 24, 2019)


3M Professional Face Shield

On Sale for only $14.99

Save $3.00

List price: $17.99

Clear, 3/32" thick polycarbonate window provides an unobstructed, non-distorted view. Adjustable suspension headband fits head sizes from 6-1/2 to 8. Tips up and out of the way when not needed.

Click here for more information or to purchase

 


Rockler Carbide Pen Turning Tools

On Sale for only $109.99

Save $30.00

List Price: $139.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Dust Right Lathe Dust Collection System

For only $44.99

Save $15.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Rubber Chucky Products
Stainless Steel Bottle Stoppers
Woodturner's Tools

(Click any Ad to go to our Sponsor's Website)